diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt deleted file mode 100644 index 7c3ca0e13de0..000000000000 --- a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +++ /dev/null @@ -1,21 +0,0 @@ -Binding for Freescale QorIQ AHCI SATA Controller - -Required properties: - - reg: Physical base address and size of the controller's register area. - - compatible: Compatibility string. Must be 'fsl,-ahci', where - chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc. - - clocks: Input clock specifier. Refer to common clock bindings. - - interrupts: Interrupt specifier. Refer to interrupt binding. - -Optional properties: - - dma-coherent: Enable AHCI coherent DMA operation. - - reg-names: register area names when there are more than 1 register area. - -Examples: - sata@3200000 { - compatible = "fsl,ls1021a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; - interrupts = ; - clocks = <&platform_clk 1>; - dma-coherent; - }; diff --git a/Documentation/devicetree/bindings/ata/fsl,ahci.yaml b/Documentation/devicetree/bindings/ata/fsl,ahci.yaml new file mode 100644 index 000000000000..ea4428bc1742 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/fsl,ahci.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/fsl,ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale QorIQ AHCI SATA Controller + +maintainers: + - Frank Li + +properties: + compatible: + oneOf: + - description: SATA controller for ls1012a + items: + - const: fsl,ls1012a-ahci + - const: fsl,ls1043a-ahci + - enum: + - fsl,ls1021a-ahci + - fsl,ls1028a-ahci + - fsl,ls1043a-ahci + - fsl,ls1046a-ahci + - fsl,ls1088a-ahci + - fsl,ls2080a-ahci + - fsl,lx2160a-ahci + + reg: + minItems: 1 + maxItems: 2 + + reg-names: + items: + - const: ahci + - const: sata-ecc + minItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include + + sata@3200000 { + compatible = "fsl,ls1021a-ahci"; + reg = <0x3200000 0x10000>; + interrupts = ; + clocks = <&platform_clk 1>; + dma-coherent; + }; diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index b595494ab9b4..e00536b49552 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -118,7 +118,7 @@ config SATA_AHCI config SATA_MOBILE_LPM_POLICY int "Default SATA Link Power Management policy" range 0 4 - default 0 + default 3 depends on SATA_AHCI help Select the Default SATA Link Power Management (LPM) policy to use diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index fc6fd583faf8..a05c17249448 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1732,8 +1732,10 @@ static void ahci_update_initial_lpm_policy(struct ata_port *ap) * Management Interaction in AHCI 1.3.1. Therefore, do not enable * LPM if the port advertises itself as an external port. */ - if (ap->pflags & ATA_PFLAG_EXTERNAL) + if (ap->pflags & ATA_PFLAG_EXTERNAL) { + ata_port_dbg(ap, "external port, not enabling LPM\n"); return; + } /* If no LPM states are supported by the HBA, do not bother with LPM */ if ((ap->host->flags & ATA_HOST_NO_PART) && diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 83431aae74d8..fdfa7b266218 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -2075,13 +2075,6 @@ static void ahci_qc_fill_rtf(struct ata_queued_cmd *qc) struct ahci_port_priv *pp = qc->ap->private_data; u8 *rx_fis = pp->rx_fis; - /* - * rtf may already be filled (e.g. for successful NCQ commands). - * If that is the case, we have nothing to do. - */ - if (qc->flags & ATA_QCFLAG_RTF_FILLED) - return; - if (pp->fbs_enabled) rx_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ; @@ -2095,7 +2088,6 @@ static void ahci_qc_fill_rtf(struct ata_queued_cmd *qc) !(qc->flags & ATA_QCFLAG_EH)) { ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf); qc->result_tf.status = (rx_fis + RX_FIS_PIO_SETUP)[15]; - qc->flags |= ATA_QCFLAG_RTF_FILLED; return; } @@ -2118,12 +2110,10 @@ static void ahci_qc_fill_rtf(struct ata_queued_cmd *qc) */ qc->result_tf.status = fis[2]; qc->result_tf.error = fis[3]; - qc->flags |= ATA_QCFLAG_RTF_FILLED; return; } ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf); - qc->flags |= ATA_QCFLAG_RTF_FILLED; } static void ahci_qc_ncq_fill_rtf(struct ata_port *ap, u64 done_mask) @@ -2158,6 +2148,7 @@ static void ahci_qc_ncq_fill_rtf(struct ata_port *ap, u64 done_mask) if (qc && ata_is_ncq(qc->tf.protocol)) { qc->result_tf.status = status; qc->result_tf.error = error; + qc->result_tf.flags = qc->tf.flags; qc->flags |= ATA_QCFLAG_RTF_FILLED; } done_mask &= ~(1ULL << tag); @@ -2182,6 +2173,7 @@ static void ahci_qc_ncq_fill_rtf(struct ata_port *ap, u64 done_mask) fis += RX_FIS_SDB; qc->result_tf.status = fis[2]; qc->result_tf.error = fis[3]; + qc->result_tf.flags = qc->tf.flags; qc->flags |= ATA_QCFLAG_RTF_FILLED; } done_mask &= ~(1ULL << tag); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 74b59b78d278..c7752dc80028 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -86,7 +86,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev); static void ata_dev_xfermask(struct ata_device *dev); static unsigned long ata_dev_blacklisted(const struct ata_device *dev); -atomic_t ata_print_id = ATOMIC_INIT(0); +static DEFINE_IDA(ata_ida); #ifdef CONFIG_ATA_FORCE struct ata_force_param { @@ -4800,8 +4800,16 @@ static void fill_result_tf(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + /* + * rtf may already be filled (e.g. for successful NCQ commands). + * If that is the case, we have nothing to do. + */ + if (qc->flags & ATA_QCFLAG_RTF_FILLED) + return; + qc->result_tf.flags = qc->tf.flags; ap->ops->qc_fill_rtf(qc); + qc->flags |= ATA_QCFLAG_RTF_FILLED; } static void ata_verify_xfer(struct ata_queued_cmd *qc) @@ -5455,6 +5463,7 @@ int sata_link_init_spd(struct ata_link *link) struct ata_port *ata_port_alloc(struct ata_host *host) { struct ata_port *ap; + int id; ap = kzalloc(sizeof(*ap), GFP_KERNEL); if (!ap) @@ -5462,8 +5471,12 @@ struct ata_port *ata_port_alloc(struct ata_host *host) ap->pflags |= ATA_PFLAG_INITIALIZING | ATA_PFLAG_FROZEN; ap->lock = &host->lock; - ap->print_id = -1; - ap->local_port_no = -1; + id = ida_alloc_min(&ata_ida, 1, GFP_KERNEL); + if (id < 0) { + kfree(ap); + return NULL; + } + ap->print_id = id; ap->host = host; ap->dev = host->dev; @@ -5488,6 +5501,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) return ap; } +EXPORT_SYMBOL_GPL(ata_port_alloc); void ata_port_free(struct ata_port *ap) { @@ -5497,6 +5511,7 @@ void ata_port_free(struct ata_port *ap) kfree(ap->pmp_link); kfree(ap->slave_link); kfree(ap->ncq_sense_buf); + ida_free(&ata_ida, ap->print_id); kfree(ap); } EXPORT_SYMBOL_GPL(ata_port_free); @@ -5547,24 +5562,19 @@ EXPORT_SYMBOL_GPL(ata_host_put); /** * ata_host_alloc - allocate and init basic ATA host resources * @dev: generic device this host is associated with - * @max_ports: maximum number of ATA ports associated with this host + * @n_ports: the number of ATA ports associated with this host * * Allocate and initialize basic ATA host resources. LLD calls * this function to allocate a host, initializes it fully and * attaches it using ata_host_register(). * - * @max_ports ports are allocated and host->n_ports is - * initialized to @max_ports. The caller is allowed to decrease - * host->n_ports before calling ata_host_register(). The unused - * ports will be automatically freed on registration. - * * RETURNS: * Allocate ATA host on success, NULL on failure. * * LOCKING: * Inherited from calling layer (may sleep). */ -struct ata_host *ata_host_alloc(struct device *dev, int max_ports) +struct ata_host *ata_host_alloc(struct device *dev, int n_ports) { struct ata_host *host; size_t sz; @@ -5572,7 +5582,7 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports) void *dr; /* alloc a container for our list of ATA ports (buses) */ - sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *); + sz = sizeof(struct ata_host) + n_ports * sizeof(void *); host = kzalloc(sz, GFP_KERNEL); if (!host) return NULL; @@ -5592,11 +5602,11 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports) spin_lock_init(&host->lock); mutex_init(&host->eh_mutex); host->dev = dev; - host->n_ports = max_ports; + host->n_ports = n_ports; kref_init(&host->kref); /* allocate ports bound to this host */ - for (i = 0; i < max_ports; i++) { + for (i = 0; i < n_ports; i++) { struct ata_port *ap; ap = ata_port_alloc(host); @@ -5905,19 +5915,6 @@ int ata_host_register(struct ata_host *host, const struct scsi_host_template *sh return -EINVAL; } - /* Blow away unused ports. This happens when LLD can't - * determine the exact number of ports to allocate at - * allocation time. - */ - for (i = host->n_ports; host->ports[i]; i++) - ata_port_free(host->ports[i]); - - /* give ports names and add SCSI hosts */ - for (i = 0; i < host->n_ports; i++) { - host->ports[i]->print_id = atomic_inc_return(&ata_print_id); - host->ports[i]->local_port_no = i + 1; - } - /* Create associated sysfs transport objects */ for (i = 0; i < host->n_ports; i++) { rc = ata_tport_add(host->dev,host->ports[i]); diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index 9e047bf912b1..48660d445602 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -1204,55 +1204,6 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) } EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); -/** - * ata_sas_port_alloc - Allocate port for a SAS attached SATA device - * @host: ATA host container for all SAS ports - * @port_info: Information from low-level host driver - * @shost: SCSI host that the scsi device is attached to - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * ata_port pointer on success / NULL on failure. - */ - -struct ata_port *ata_sas_port_alloc(struct ata_host *host, - struct ata_port_info *port_info, - struct Scsi_Host *shost) -{ - struct ata_port *ap; - - ap = ata_port_alloc(host); - if (!ap) - return NULL; - - ap->port_no = 0; - ap->lock = &host->lock; - ap->pio_mask = port_info->pio_mask; - ap->mwdma_mask = port_info->mwdma_mask; - ap->udma_mask = port_info->udma_mask; - ap->flags |= port_info->flags; - ap->ops = port_info->port_ops; - ap->cbl = ATA_CBL_SATA; - ap->print_id = atomic_inc_return(&ata_print_id); - - return ap; -} -EXPORT_SYMBOL_GPL(ata_sas_port_alloc); - -int ata_sas_tport_add(struct device *parent, struct ata_port *ap) -{ - return ata_tport_add(parent, ap); -} -EXPORT_SYMBOL_GPL(ata_sas_tport_add); - -void ata_sas_tport_delete(struct ata_port *ap) -{ - ata_tport_delete(ap); -} -EXPORT_SYMBOL_GPL(ata_sas_tport_delete); - /** * ata_sas_device_configure - Default device_configure routine for libata * devices diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 67ce756f8dfc..d6f5e25e1ed8 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -230,6 +230,87 @@ void ata_scsi_set_sense_information(struct ata_device *dev, SCSI_SENSE_BUFFERSIZE, information); } +/** + * ata_scsi_set_passthru_sense_fields - Set ATA fields in sense buffer + * @qc: ATA PASS-THROUGH command. + * + * Populates "ATA Status Return sense data descriptor" / "Fixed format + * sense data" with ATA taskfile fields. + * + * LOCKING: + * None. + */ +static void ata_scsi_set_passthru_sense_fields(struct ata_queued_cmd *qc) +{ + struct ata_device *dev = qc->dev; + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->result_tf; + unsigned char *sb = cmd->sense_buffer; + + if (!(qc->flags & ATA_QCFLAG_RTF_FILLED)) { + ata_dev_dbg(dev, + "missing result TF: can't set ATA PT sense fields\n"); + return; + } + + if ((sb[0] & 0x7f) >= 0x72) { + unsigned char *desc; + u8 len; + + /* descriptor format */ + len = sb[7]; + desc = (char *)scsi_sense_desc_find(sb, len + 8, 9); + if (!desc) { + if (SCSI_SENSE_BUFFERSIZE < len + 14) + return; + sb[7] = len + 14; + desc = sb + 8 + len; + } + desc[0] = 9; + desc[1] = 12; + /* + * Copy registers into sense buffer. + */ + desc[2] = 0x00; + desc[3] = tf->error; + desc[5] = tf->nsect; + desc[7] = tf->lbal; + desc[9] = tf->lbam; + desc[11] = tf->lbah; + desc[12] = tf->device; + desc[13] = tf->status; + + /* + * Fill in Extend bit, and the high order bytes + * if applicable. + */ + if (tf->flags & ATA_TFLAG_LBA48) { + desc[2] |= 0x01; + desc[4] = tf->hob_nsect; + desc[6] = tf->hob_lbal; + desc[8] = tf->hob_lbam; + desc[10] = tf->hob_lbah; + } + } else { + /* Fixed sense format */ + sb[0] |= 0x80; + sb[3] = tf->error; + sb[4] = tf->status; + sb[5] = tf->device; + sb[6] = tf->nsect; + if (tf->flags & ATA_TFLAG_LBA48) { + sb[8] |= 0x80; + if (tf->hob_nsect) + sb[8] |= 0x40; + if (tf->hob_lbal || tf->hob_lbam || tf->hob_lbah) + sb[8] |= 0x20; + } + sb[9] = tf->lbal; + sb[10] = tf->lbam; + sb[11] = tf->lbah; + } +} + static void ata_scsi_set_invalid_field(struct ata_device *dev, struct scsi_cmnd *cmd, u16 field, u8 bit) { @@ -711,7 +792,6 @@ static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc) /** * ata_to_sense_error - convert ATA error to SCSI error - * @id: ATA device number * @drv_stat: value contained in ATA status register * @drv_err: value contained in ATA error register * @sk: the sense key we'll fill out @@ -725,8 +805,8 @@ static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc) * LOCKING: * spin_lock_irqsave(host lock) */ -static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, - u8 *asc, u8 *ascq) +static void ata_to_sense_error(u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, + u8 *ascq) { int i; @@ -837,10 +917,8 @@ static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, * ata_gen_passthru_sense - Generate check condition sense block. * @qc: Command that completed. * - * This function is specific to the ATA descriptor format sense - * block specified for the ATA pass through commands. Regardless - * of whether the command errored or not, return a sense - * block. Copy all controller registers into the sense + * This function is specific to the ATA pass through commands. + * Regardless of whether the command errored or not, return a sense * block. If there was no error, we get the request from an ATA * passthrough command, so we use the following sense data: * sk = RECOVERED ERROR @@ -852,13 +930,16 @@ static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, */ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc) { + struct ata_device *dev = qc->dev; struct scsi_cmnd *cmd = qc->scsicmd; struct ata_taskfile *tf = &qc->result_tf; - unsigned char *sb = cmd->sense_buffer; - unsigned char *desc = sb + 8; u8 sense_key, asc, ascq; - memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + if (!(qc->flags & ATA_QCFLAG_RTF_FILLED)) { + ata_dev_dbg(dev, + "missing result TF: can't generate ATA PT sense data\n"); + return; + } /* * Use ata_to_sense_error() to map status register bits @@ -866,71 +947,12 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc) */ if (qc->err_mask || tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { - ata_to_sense_error(qc->ap->print_id, tf->status, tf->error, + ata_to_sense_error(tf->status, tf->error, &sense_key, &asc, &ascq); ata_scsi_set_sense(qc->dev, cmd, sense_key, asc, ascq); } else { - /* - * ATA PASS-THROUGH INFORMATION AVAILABLE - * Always in descriptor format sense. - */ - scsi_build_sense(cmd, 1, RECOVERED_ERROR, 0, 0x1D); - } - - if ((cmd->sense_buffer[0] & 0x7f) >= 0x72) { - u8 len; - - /* descriptor format */ - len = sb[7]; - desc = (char *)scsi_sense_desc_find(sb, len + 8, 9); - if (!desc) { - if (SCSI_SENSE_BUFFERSIZE < len + 14) - return; - sb[7] = len + 14; - desc = sb + 8 + len; - } - desc[0] = 9; - desc[1] = 12; - /* - * Copy registers into sense buffer. - */ - desc[2] = 0x00; - desc[3] = tf->error; - desc[5] = tf->nsect; - desc[7] = tf->lbal; - desc[9] = tf->lbam; - desc[11] = tf->lbah; - desc[12] = tf->device; - desc[13] = tf->status; - - /* - * Fill in Extend bit, and the high order bytes - * if applicable. - */ - if (tf->flags & ATA_TFLAG_LBA48) { - desc[2] |= 0x01; - desc[4] = tf->hob_nsect; - desc[6] = tf->hob_lbal; - desc[8] = tf->hob_lbam; - desc[10] = tf->hob_lbah; - } - } else { - /* Fixed sense format */ - desc[0] = tf->error; - desc[1] = tf->status; - desc[2] = tf->device; - desc[3] = tf->nsect; - desc[7] = 0; - if (tf->flags & ATA_TFLAG_LBA48) { - desc[8] |= 0x80; - if (tf->hob_nsect) - desc[8] |= 0x40; - if (tf->hob_lbal || tf->hob_lbam || tf->hob_lbah) - desc[8] |= 0x20; - } - desc[9] = tf->lbal; - desc[10] = tf->lbam; - desc[11] = tf->lbah; + /* ATA PASS-THROUGH INFORMATION AVAILABLE */ + ata_scsi_set_sense(qc->dev, cmd, RECOVERED_ERROR, 0, 0x1D); } } @@ -953,20 +975,25 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc) u64 block; u8 sense_key, asc, ascq; - memset(sb, 0, SCSI_SENSE_BUFFERSIZE); - if (ata_dev_disabled(dev)) { /* Device disabled after error recovery */ /* LOGICAL UNIT NOT READY, HARD RESET REQUIRED */ ata_scsi_set_sense(dev, cmd, NOT_READY, 0x04, 0x21); return; } + + if (!(qc->flags & ATA_QCFLAG_RTF_FILLED)) { + ata_dev_dbg(dev, + "missing result TF: can't generate sense data\n"); + return; + } + /* Use ata_to_sense_error() to map status register bits * onto sense key, asc & ascq. */ if (qc->err_mask || tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { - ata_to_sense_error(qc->ap->print_id, tf->status, tf->error, + ata_to_sense_error(tf->status, tf->error, &sense_key, &asc, &ascq); ata_scsi_set_sense(dev, cmd, sense_key, asc, ascq); } else { @@ -1631,26 +1658,32 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; u8 *cdb = cmd->cmnd; - int need_sense = (qc->err_mask != 0) && - !(qc->flags & ATA_QCFLAG_SENSE_VALID); + bool have_sense = qc->flags & ATA_QCFLAG_SENSE_VALID; + bool is_ata_passthru = cdb[0] == ATA_16 || cdb[0] == ATA_12; + bool is_ck_cond_request = cdb[2] & 0x20; + bool is_error = qc->err_mask != 0; /* For ATA pass thru (SAT) commands, generate a sense block if * user mandated it or if there's an error. Note that if we - * generate because the user forced us to [CK_COND =1], a check + * generate because the user forced us to [CK_COND=1], a check * condition is generated and the ATA register values are returned * whether the command completed successfully or not. If there - * was no error, we use the following sense data: + * was no error, and CK_COND=1, we use the following sense data: * sk = RECOVERED ERROR * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE */ - if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && - ((cdb[2] & 0x20) || need_sense)) - ata_gen_passthru_sense(qc); - else if (need_sense) + if (is_ata_passthru && (is_ck_cond_request || is_error || have_sense)) { + if (!have_sense) + ata_gen_passthru_sense(qc); + ata_scsi_set_passthru_sense_fields(qc); + if (is_ck_cond_request) + set_status_byte(qc->scsicmd, SAM_STAT_CHECK_CONDITION); + } else if (is_error && !have_sense) { ata_gen_ata_sense(qc); - else + } else { /* Keep the SCSI ML and status byte, clear host byte. */ cmd->result &= 0x0000ffff; + } ata_qc_done(qc); } @@ -2589,14 +2622,8 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) /* handle completion from EH */ if (unlikely(err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID)) { - if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) { - /* FIXME: not quite right; we don't want the - * translation of taskfile registers into a - * sense descriptors, since that's only - * correct for ATA, not ATAPI - */ + if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) ata_gen_passthru_sense(qc); - } /* SCSI EH automatically locks door if sdev->locked is * set. Sometimes door lock request continues to diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c index 3e49a877500e..9e24c33388f9 100644 --- a/drivers/ata/libata-transport.c +++ b/drivers/ata/libata-transport.c @@ -217,7 +217,8 @@ static DEVICE_ATTR(name, S_IRUGO, show_ata_port_##name, NULL) ata_port_simple_attr(nr_pmp_links, nr_pmp_links, "%d\n", int); ata_port_simple_attr(stats.idle_irq, idle_irq, "%ld\n", unsigned long); -ata_port_simple_attr(local_port_no, port_no, "%u\n", unsigned int); +/* We want the port_no sysfs attibute to start at 1 (ap->port_no starts at 0) */ +ata_port_simple_attr(port_no + 1, port_no, "%u\n", unsigned int); static DECLARE_TRANSPORT_CLASS(ata_port_class, "ata_port", NULL, NULL, NULL); @@ -265,6 +266,7 @@ void ata_tport_delete(struct ata_port *ap) transport_destroy_device(dev); put_device(dev); } +EXPORT_SYMBOL_GPL(ata_tport_delete); static const struct device_type ata_port_sas_type = { .name = ATA_PORT_TYPE_NAME, @@ -329,6 +331,7 @@ int ata_tport_add(struct device *parent, put_device(dev); return error; } +EXPORT_SYMBOL_GPL(ata_tport_add); /** * ata_port_classify - determine device type based on ATA-spec signature diff --git a/drivers/ata/libata-transport.h b/drivers/ata/libata-transport.h index 08a57fb9dc61..50cd2cbe8eea 100644 --- a/drivers/ata/libata-transport.h +++ b/drivers/ata/libata-transport.h @@ -8,9 +8,6 @@ extern struct scsi_transport_template *ata_scsi_transport_template; int ata_tlink_add(struct ata_link *link); void ata_tlink_delete(struct ata_link *link); -int ata_tport_add(struct device *parent, struct ata_port *ap); -void ata_tport_delete(struct ata_port *ap); - struct scsi_transport_template *ata_attach_transport(void); void ata_release_transport(struct scsi_transport_template *t); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 38ce13b55474..6abf265f626e 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -32,7 +32,6 @@ enum { #define ATA_PORT_TYPE_NAME "ata_port" -extern atomic_t ata_print_id; extern int atapi_passthru16; extern int libata_fua; extern int libata_noacpi; @@ -82,7 +81,6 @@ extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp); extern int sata_link_init_spd(struct ata_link *link); extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); -extern struct ata_port *ata_port_alloc(struct ata_host *host); extern const char *sata_spd_string(unsigned int spd); extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log, u8 page, void *buf, unsigned int sectors); diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index cbbe43d8ef87..88714b7b0dba 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -572,15 +572,6 @@ static struct ata_port_operations sas_sata_ops = { .end_eh = sas_ata_end_eh, }; -static struct ata_port_info sata_port_info = { - .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ | - ATA_FLAG_SAS_HOST | ATA_FLAG_FPDMA_AUX, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA6, - .port_ops = &sas_sata_ops -}; - int sas_ata_init(struct domain_device *found_dev) { struct sas_ha_struct *ha = found_dev->port->ha; @@ -597,18 +588,25 @@ int sas_ata_init(struct domain_device *found_dev) ata_host_init(ata_host, ha->dev, &sas_sata_ops); - ap = ata_sas_port_alloc(ata_host, &sata_port_info, shost); + ap = ata_port_alloc(ata_host); if (!ap) { - pr_err("ata_sas_port_alloc failed.\n"); + pr_err("ata_port_alloc failed.\n"); rc = -ENODEV; goto free_host; } + ap->port_no = 0; + ap->pio_mask = ATA_PIO4; + ap->mwdma_mask = ATA_MWDMA2; + ap->udma_mask = ATA_UDMA6; + ap->flags |= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ | + ATA_FLAG_SAS_HOST | ATA_FLAG_FPDMA_AUX; + ap->ops = &sas_sata_ops; ap->private_data = found_dev; ap->cbl = ATA_CBL_SATA; ap->scsi_host = shost; - rc = ata_sas_tport_add(ata_host->dev, ap); + rc = ata_tport_add(ata_host->dev, ap); if (rc) goto free_port; diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 48d975c6dbf2..951bdc554a10 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -300,7 +300,7 @@ void sas_free_device(struct kref *kref) kfree(dev->ex_dev.ex_phy); if (dev_is_sata(dev) && dev->sata_dev.ap) { - ata_sas_tport_delete(dev->sata_dev.ap); + ata_tport_delete(dev->sata_dev.ap); ata_port_free(dev->sata_dev.ap); ata_host_put(dev->sata_dev.ata_host); dev->sata_dev.ata_host = NULL; diff --git a/include/linux/libata.h b/include/linux/libata.h index 7d3bd7c9664a..17394098bee9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -814,7 +814,6 @@ struct ata_port { /* Flags that change dynamically, protected by ap->lock */ unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int print_id; /* user visible unique port ID */ - unsigned int local_port_no; /* host local port num */ unsigned int port_no; /* 0 based port no. inside the host */ #ifdef CONFIG_ATA_SFF @@ -1069,7 +1068,7 @@ extern int sata_std_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); extern void ata_std_postreset(struct ata_link *link, unsigned int *classes); -extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports); +extern struct ata_host *ata_host_alloc(struct device *dev, int n_ports); extern struct ata_host *ata_host_alloc_pinfo(struct device *dev, const struct ata_port_info * const * ppi, int n_ports); extern void ata_host_get(struct ata_host *host); @@ -1082,7 +1081,6 @@ extern int ata_host_activate(struct ata_host *host, int irq, const struct scsi_host_template *sht); extern void ata_host_detach(struct ata_host *host); extern void ata_host_init(struct ata_host *, struct device *, struct ata_port_operations *); -extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, void __user *arg); #ifdef CONFIG_COMPAT @@ -1246,12 +1244,11 @@ extern int sata_link_debounce(struct ata_link *link, extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, bool spm_wakeup); extern int ata_slave_link_init(struct ata_port *ap); -extern struct ata_port *ata_sas_port_alloc(struct ata_host *, - struct ata_port_info *, struct Scsi_Host *); extern void ata_port_probe(struct ata_port *ap); +extern struct ata_port *ata_port_alloc(struct ata_host *host); extern void ata_port_free(struct ata_port *ap); -extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap); -extern void ata_sas_tport_delete(struct ata_port *ap); +extern int ata_tport_add(struct device *parent, struct ata_port *ap); +extern void ata_tport_delete(struct ata_port *ap); int ata_sas_device_configure(struct scsi_device *sdev, struct queue_limits *lim, struct ata_port *ap); extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);