Add Richtek RTQ2208 SubPMIC support
Merge series from Alina Yu <alina_yu@richtek.com>: This patch series adds support for RTQ2208 SubPMIC regulators. The RTQ2208 is a multi-phase, programmable power management IC that integrate with dual multi-configurable, synchronous buck converters and two ldos. The bucks features wide output voltage range from 0.4V to 2.05V and the capability to configure the corresponding power stages.
This commit is contained in:
Mark Brown
commit
c82197491f
197
Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml
Normal file
197
Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml
Normal file
@ -0,0 +1,197 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/regulator/richtek,rtq2208.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Richtek RTQ2208 SubPMIC Regulator
|
||||
|
||||
maintainers:
|
||||
- Alina Yu <alina_yu@richtek.com>
|
||||
|
||||
description: |
|
||||
RTQ2208 is a highly integrated power converter that offers functional safety dual
|
||||
multi-configurable synchronous buck converters and two LDOs.
|
||||
|
||||
Bucks support "regulator-allowed-modes" and "regulator-mode". The former defines the permitted
|
||||
switching operation in normal mode; the latter defines the operation in suspend to RAM mode.
|
||||
|
||||
No matter the RTQ2208 is configured to normal or suspend to RAM mode, there are two switching
|
||||
operation modes for all buck rails, automatic power saving mode (Auto mode) and forced continuous
|
||||
conduction mode (FCCM).
|
||||
|
||||
The definition of modes is in the datasheet which is available in below link
|
||||
and their meaning is::
|
||||
0 - Auto mode for power saving, which reducing the switching frequency at light load condition
|
||||
to maintain high frequency.
|
||||
1 - FCCM to meet the strict voltage regulation accuracy, which keeping constant switching frequency.
|
||||
|
||||
Datasheet will be available soon at
|
||||
https://www.richtek.com/assets/Products
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- richtek,rtq2208
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
richtek,mtp-sel-high:
|
||||
type: boolean
|
||||
description:
|
||||
vout register selection based on this boolean value.
|
||||
false - Using DVS0 register setting to adjust vout
|
||||
true - Using DVS1 register setting to adjust vout
|
||||
|
||||
regulators:
|
||||
type: object
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"^buck-[a-h]$":
|
||||
type: object
|
||||
$ref: regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
description:
|
||||
description for buck-[a-h] regulator.
|
||||
|
||||
properties:
|
||||
regulator-allowed-modes:
|
||||
description:
|
||||
two buck modes in different switching accuracy.
|
||||
0 - Auto mode
|
||||
1 - FCCM
|
||||
items:
|
||||
enum: [0, 1]
|
||||
|
||||
"^ldo[1-2]$":
|
||||
type: object
|
||||
$ref: regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
description:
|
||||
regulator description for ldo[1-2].
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- regulators
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmic@10 {
|
||||
compatible = "richtek,rtq2208";
|
||||
reg = <0x10>;
|
||||
interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
|
||||
richtek,mtp-sel-high;
|
||||
|
||||
regulators {
|
||||
buck-a {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
regulator-allowed-modes = <0 1>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <1>;
|
||||
};
|
||||
};
|
||||
buck-b {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
regulator-allowed-modes = <0 1>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <1>;
|
||||
};
|
||||
};
|
||||
buck-c {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
regulator-allowed-modes = <0 1>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <1>;
|
||||
};
|
||||
};
|
||||
buck-d {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
regulator-allowed-modes = <0 1>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <1>;
|
||||
};
|
||||
};
|
||||
buck-e {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
regulator-allowed-modes = <0 1>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <1>;
|
||||
};
|
||||
};
|
||||
buck-f {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
regulator-allowed-modes = <0 1>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <1>;
|
||||
};
|
||||
};
|
||||
buck-g {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
regulator-allowed-modes = <0 1>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <1>;
|
||||
};
|
||||
};
|
||||
buck-h {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
regulator-allowed-modes = <0 1>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <1>;
|
||||
};
|
||||
};
|
||||
ldo1 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
ldo2 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -1254,6 +1254,17 @@ config REGULATOR_RTQ6752
|
||||
synchronous boost converters for PAVDD, and one synchronous NAVDD
|
||||
buck-boost. This device is suitable for automotive TFT-LCD panel.
|
||||
|
||||
config REGULATOR_RTQ2208
|
||||
tristate "Richtek RTQ2208 SubPMIC Regulator"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver adds support for RTQ2208 SubPMIC regulators.
|
||||
The RTQ2208 is a multi-phase, programmable power management IC that
|
||||
integrate with dual multi-configurable, synchronous buck converters
|
||||
and two ldos. It features wide output voltage range from 0.4V to 2.05V
|
||||
and the capability to configure the corresponding power stages.
|
||||
|
||||
config REGULATOR_S2MPA01
|
||||
tristate "Samsung S2MPA01 voltage regulator"
|
||||
depends on MFD_SEC_CORE || COMPILE_TEST
|
||||
|
||||
@ -147,6 +147,7 @@ obj-$(CONFIG_REGULATOR_RT6245) += rt6245-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RTQ2134) += rtq2134-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RTQ6752) += rtq6752-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RTQ2208) += rtq2208-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
|
||||
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
|
||||
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
|
||||
|
||||
583
drivers/regulator/rtq2208-regulator.c
Normal file
583
drivers/regulator/rtq2208-regulator.c
Normal file
@ -0,0 +1,583 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/util_macros.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/mod_devicetable.h>
|
||||
|
||||
/* Register */
|
||||
#define RTQ2208_REG_GLOBAL_INT1 0x12
|
||||
#define RTQ2208_REG_FLT_RECORDBUCK_CB 0x18
|
||||
#define RTQ2208_REG_GLOBAL_INT1_MASK 0x1D
|
||||
#define RTQ2208_REG_FLT_MASKBUCK_CB 0x1F
|
||||
#define RTQ2208_REG_BUCK_C_CFG0 0x32
|
||||
#define RTQ2208_REG_BUCK_B_CFG0 0x42
|
||||
#define RTQ2208_REG_BUCK_A_CFG0 0x52
|
||||
#define RTQ2208_REG_BUCK_D_CFG0 0x62
|
||||
#define RTQ2208_REG_BUCK_G_CFG0 0x72
|
||||
#define RTQ2208_REG_BUCK_F_CFG0 0x82
|
||||
#define RTQ2208_REG_BUCK_E_CFG0 0x92
|
||||
#define RTQ2208_REG_BUCK_H_CFG0 0xA2
|
||||
#define RTQ2208_REG_LDO1_CFG 0xB1
|
||||
#define RTQ2208_REG_LDO2_CFG 0xC1
|
||||
|
||||
/* Mask */
|
||||
#define RTQ2208_BUCK_NR_MTP_SEL_MASK GENMASK(7, 0)
|
||||
#define RTQ2208_BUCK_EN_NR_MTP_SEL0_MASK BIT(0)
|
||||
#define RTQ2208_BUCK_EN_NR_MTP_SEL1_MASK BIT(1)
|
||||
#define RTQ2208_BUCK_RSPUP_MASK GENMASK(6, 4)
|
||||
#define RTQ2208_BUCK_RSPDN_MASK GENMASK(2, 0)
|
||||
#define RTQ2208_BUCK_NRMODE_MASK BIT(5)
|
||||
#define RTQ2208_BUCK_STRMODE_MASK BIT(5)
|
||||
#define RTQ2208_BUCK_EN_STR_MASK BIT(0)
|
||||
#define RTQ2208_LDO_EN_STR_MASK BIT(7)
|
||||
#define RTQ2208_EN_DIS_MASK BIT(0)
|
||||
#define RTQ2208_BUCK_RAMP_SEL_MASK GENMASK(2, 0)
|
||||
#define RTQ2208_HD_INT_MASK BIT(0)
|
||||
|
||||
/* Size */
|
||||
#define RTQ2208_VOUT_MAXNUM 256
|
||||
#define RTQ2208_BUCK_NUM_IRQ_REGS 5
|
||||
#define RTQ2208_STS_NUM_IRQ_REGS 2
|
||||
|
||||
/* Value */
|
||||
#define RTQ2208_RAMP_VALUE_MIN_uV 500
|
||||
#define RTQ2208_RAMP_VALUE_MAX_uV 64000
|
||||
|
||||
#define RTQ2208_BUCK_MASK(uv_irq, ov_irq) (1 << ((uv_irq) % 8) | 1 << ((ov_irq) % 8))
|
||||
|
||||
enum {
|
||||
RTQ2208_BUCK_B = 0,
|
||||
RTQ2208_BUCK_C,
|
||||
RTQ2208_BUCK_D,
|
||||
RTQ2208_BUCK_A,
|
||||
RTQ2208_BUCK_F,
|
||||
RTQ2208_BUCK_G,
|
||||
RTQ2208_BUCK_H,
|
||||
RTQ2208_BUCK_E,
|
||||
RTQ2208_LDO2,
|
||||
RTQ2208_LDO1,
|
||||
RTQ2208_LDO_MAX,
|
||||
};
|
||||
|
||||
enum {
|
||||
RTQ2208_AUTO_MODE = 0,
|
||||
RTQ2208_FCCM,
|
||||
};
|
||||
|
||||
struct rtq2208_regulator_desc {
|
||||
struct regulator_desc desc;
|
||||
unsigned int mtp_sel_reg;
|
||||
unsigned int mtp_sel_mask;
|
||||
unsigned int mode_reg;
|
||||
unsigned int mode_mask;
|
||||
unsigned int suspend_config_reg;
|
||||
unsigned int suspend_enable_mask;
|
||||
unsigned int suspend_mode_mask;
|
||||
};
|
||||
|
||||
struct rtq2208_rdev_map {
|
||||
struct regulator_dev *rdev[RTQ2208_LDO_MAX];
|
||||
struct regmap *regmap;
|
||||
struct device *dev;
|
||||
};
|
||||
|
||||
/* set Normal Auto/FCCM mode */
|
||||
static int rtq2208_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
||||
{
|
||||
const struct rtq2208_regulator_desc *rdesc =
|
||||
(const struct rtq2208_regulator_desc *)rdev->desc;
|
||||
unsigned int val, shift;
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
val = RTQ2208_AUTO_MODE;
|
||||
break;
|
||||
case REGULATOR_MODE_FAST:
|
||||
val = RTQ2208_FCCM;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
shift = ffs(rdesc->mode_mask) - 1;
|
||||
return regmap_update_bits(rdev->regmap, rdesc->mode_reg,
|
||||
rdesc->mode_mask, val << shift);
|
||||
}
|
||||
|
||||
static unsigned int rtq2208_get_mode(struct regulator_dev *rdev)
|
||||
{
|
||||
const struct rtq2208_regulator_desc *rdesc =
|
||||
(const struct rtq2208_regulator_desc *)rdev->desc;
|
||||
unsigned int mode_val;
|
||||
int ret;
|
||||
|
||||
ret = regmap_read(rdev->regmap, rdesc->mode_reg, &mode_val);
|
||||
if (ret)
|
||||
return REGULATOR_MODE_INVALID;
|
||||
|
||||
return (mode_val & rdesc->mode_mask) ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
|
||||
}
|
||||
|
||||
static int rtq2208_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
||||
{
|
||||
const struct regulator_desc *desc = rdev->desc;
|
||||
unsigned int sel = 0, val;
|
||||
|
||||
ramp_delay = max(ramp_delay, RTQ2208_RAMP_VALUE_MIN_uV);
|
||||
ramp_delay = min(ramp_delay, RTQ2208_RAMP_VALUE_MAX_uV);
|
||||
|
||||
ramp_delay /= RTQ2208_RAMP_VALUE_MIN_uV;
|
||||
|
||||
/*
|
||||
* fls(ramp_delay) - 1: doing LSB shift, let it starts from 0
|
||||
*
|
||||
* RTQ2208_BUCK_RAMP_SEL_MASK - sel: doing descending order shifting.
|
||||
* Because the relation of seleltion and value is like that
|
||||
*
|
||||
* seletion: value
|
||||
* 000: 64mv
|
||||
* 001: 32mv
|
||||
* ...
|
||||
* 111: 0.5mv
|
||||
*
|
||||
* For example, if I would like to select 64mv, the fls(ramp_delay) - 1 will be 0b111,
|
||||
* and I need to use 0b111 - sel to do the shifting
|
||||
*/
|
||||
|
||||
sel = fls(ramp_delay) - 1;
|
||||
sel = RTQ2208_BUCK_RAMP_SEL_MASK - sel;
|
||||
|
||||
val = FIELD_PREP(RTQ2208_BUCK_RSPUP_MASK, sel) | FIELD_PREP(RTQ2208_BUCK_RSPDN_MASK, sel);
|
||||
|
||||
return regmap_update_bits(rdev->regmap, desc->ramp_reg,
|
||||
RTQ2208_BUCK_RSPUP_MASK | RTQ2208_BUCK_RSPDN_MASK, val);
|
||||
}
|
||||
|
||||
static int rtq2208_set_suspend_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
const struct rtq2208_regulator_desc *rdesc =
|
||||
(const struct rtq2208_regulator_desc *)rdev->desc;
|
||||
|
||||
return regmap_set_bits(rdev->regmap, rdesc->suspend_config_reg, rdesc->suspend_enable_mask);
|
||||
}
|
||||
|
||||
static int rtq2208_set_suspend_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
const struct rtq2208_regulator_desc *rdesc =
|
||||
(const struct rtq2208_regulator_desc *)rdev->desc;
|
||||
|
||||
return regmap_update_bits(rdev->regmap, rdesc->suspend_config_reg, rdesc->suspend_enable_mask, 0);
|
||||
}
|
||||
|
||||
static int rtq2208_set_suspend_mode(struct regulator_dev *rdev, unsigned int mode)
|
||||
{
|
||||
const struct rtq2208_regulator_desc *rdesc =
|
||||
(const struct rtq2208_regulator_desc *)rdev->desc;
|
||||
unsigned int val, shift;
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
val = RTQ2208_AUTO_MODE;
|
||||
break;
|
||||
case REGULATOR_MODE_FAST:
|
||||
val = RTQ2208_FCCM;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
shift = ffs(rdesc->suspend_mode_mask) - 1;
|
||||
|
||||
return regmap_update_bits(rdev->regmap, rdesc->suspend_config_reg,
|
||||
rdesc->suspend_mode_mask, val << shift);
|
||||
}
|
||||
|
||||
static const struct regulator_ops rtq2208_regulator_buck_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_mode = rtq2208_set_mode,
|
||||
.get_mode = rtq2208_get_mode,
|
||||
.set_ramp_delay = rtq2208_set_ramp_delay,
|
||||
.set_active_discharge = regulator_set_active_discharge_regmap,
|
||||
.set_suspend_enable = rtq2208_set_suspend_enable,
|
||||
.set_suspend_disable = rtq2208_set_suspend_disable,
|
||||
.set_suspend_mode = rtq2208_set_suspend_mode,
|
||||
};
|
||||
|
||||
static const struct regulator_ops rtq2208_regulator_ldo_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.set_active_discharge = regulator_set_active_discharge_regmap,
|
||||
.set_suspend_enable = rtq2208_set_suspend_enable,
|
||||
.set_suspend_disable = rtq2208_set_suspend_disable,
|
||||
};
|
||||
|
||||
static unsigned int rtq2208_of_map_mode(unsigned int mode)
|
||||
{
|
||||
switch (mode) {
|
||||
case RTQ2208_AUTO_MODE:
|
||||
return REGULATOR_MODE_NORMAL;
|
||||
case RTQ2208_FCCM:
|
||||
return REGULATOR_MODE_FAST;
|
||||
default:
|
||||
return REGULATOR_MODE_INVALID;
|
||||
}
|
||||
}
|
||||
|
||||
static int rtq2208_init_irq_mask(struct rtq2208_rdev_map *rdev_map, unsigned int *buck_masks)
|
||||
{
|
||||
unsigned char buck_clr_masks[5] = {0x33, 0x33, 0x33, 0x33, 0x33},
|
||||
sts_clr_masks[2] = {0xE7, 0xF7}, sts_masks[2] = {0xE6, 0xF6};
|
||||
int ret;
|
||||
|
||||
/* write clear all buck irq once */
|
||||
ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB, buck_clr_masks, 5);
|
||||
if (ret)
|
||||
return dev_err_probe(rdev_map->dev, ret, "Failed to clr buck irqs\n");
|
||||
|
||||
/* write clear general irq once */
|
||||
ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1, sts_clr_masks, 2);
|
||||
if (ret)
|
||||
return dev_err_probe(rdev_map->dev, ret, "Failed to clr general irqs\n");
|
||||
|
||||
/* unmask buck ov/uv irq */
|
||||
ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_MASKBUCK_CB, buck_masks, 5);
|
||||
if (ret)
|
||||
return dev_err_probe(rdev_map->dev, ret, "Failed to unmask buck irqs\n");
|
||||
|
||||
/* unmask needed general irq */
|
||||
return regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1_MASK, sts_masks, 2);
|
||||
}
|
||||
|
||||
static irqreturn_t rtq2208_irq_handler(int irqno, void *devid)
|
||||
{
|
||||
unsigned char buck_flags[RTQ2208_BUCK_NUM_IRQ_REGS], sts_flags[RTQ2208_STS_NUM_IRQ_REGS];
|
||||
int ret = 0, i, uv_bit, ov_bit;
|
||||
struct rtq2208_rdev_map *rdev_map = devid;
|
||||
struct regulator_dev *rdev;
|
||||
|
||||
if (!rdev_map)
|
||||
return IRQ_NONE;
|
||||
|
||||
/* read irq event */
|
||||
ret = regmap_bulk_read(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB,
|
||||
buck_flags, ARRAY_SIZE(buck_flags));
|
||||
if (ret)
|
||||
return IRQ_NONE;
|
||||
|
||||
ret = regmap_bulk_read(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1,
|
||||
sts_flags, ARRAY_SIZE(sts_flags));
|
||||
if (ret)
|
||||
return IRQ_NONE;
|
||||
|
||||
/* clear irq event */
|
||||
ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB,
|
||||
buck_flags, ARRAY_SIZE(buck_flags));
|
||||
if (ret)
|
||||
return IRQ_NONE;
|
||||
|
||||
ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1,
|
||||
sts_flags, ARRAY_SIZE(sts_flags));
|
||||
if (ret)
|
||||
return IRQ_NONE;
|
||||
|
||||
for (i = 0; i < RTQ2208_LDO_MAX; i++) {
|
||||
if (!rdev_map->rdev[i])
|
||||
continue;
|
||||
|
||||
rdev = rdev_map->rdev[i];
|
||||
/* uv irq */
|
||||
uv_bit = (i & 1) ? 4 : 0;
|
||||
if (buck_flags[i >> 1] & (1 << uv_bit))
|
||||
regulator_notifier_call_chain(rdev,
|
||||
REGULATOR_EVENT_UNDER_VOLTAGE, NULL);
|
||||
/* ov irq */
|
||||
ov_bit = uv_bit + 1;
|
||||
if (buck_flags[i >> 1] & (1 << ov_bit))
|
||||
regulator_notifier_call_chain(rdev,
|
||||
REGULATOR_EVENT_REGULATION_OUT, NULL);
|
||||
|
||||
/* hd irq */
|
||||
if (sts_flags[1] & RTQ2208_HD_INT_MASK)
|
||||
regulator_notifier_call_chain(rdev,
|
||||
REGULATOR_EVENT_OVER_TEMP, NULL);
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
#define RTQ2208_REGULATOR_INFO(_name, _base) \
|
||||
{ \
|
||||
.name = #_name, \
|
||||
.base = _base, \
|
||||
}
|
||||
#define BUCK_RG_BASE(_id) RTQ2208_REG_BUCK_##_id##_CFG0
|
||||
#define BUCK_RG_SHIFT(_base, _shift) (_base + _shift)
|
||||
#define LDO_RG_BASE(_id) RTQ2208_REG_LDO##_id##_CFG
|
||||
#define LDO_RG_SHIFT(_base, _shift) (_base + _shift)
|
||||
#define VSEL_SHIFT(_sel) (_sel ? 3 : 1)
|
||||
#define MTP_SEL_MASK(_sel) RTQ2208_BUCK_EN_NR_MTP_SEL##_sel##_MASK
|
||||
|
||||
static const struct linear_range rtq2208_vout_range[] = {
|
||||
REGULATOR_LINEAR_RANGE(400000, 0, 180, 5000),
|
||||
REGULATOR_LINEAR_RANGE(1310000, 181, 255, 10000),
|
||||
};
|
||||
|
||||
static int rtq2208_of_get_fixed_voltage(struct device *dev,
|
||||
struct of_regulator_match *rtq2208_ldo_match, int n_fixed)
|
||||
{
|
||||
struct device_node *np;
|
||||
struct of_regulator_match *match;
|
||||
struct rtq2208_regulator_desc *rdesc;
|
||||
struct regulator_init_data *init_data;
|
||||
int ret, i;
|
||||
|
||||
if (!dev->of_node)
|
||||
return -ENODEV;
|
||||
|
||||
np = of_get_child_by_name(dev->of_node, "regulators");
|
||||
if (!np)
|
||||
np = dev->of_node;
|
||||
|
||||
ret = of_regulator_match(dev, np, rtq2208_ldo_match, n_fixed);
|
||||
|
||||
of_node_put(np);
|
||||
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < n_fixed; i++) {
|
||||
match = rtq2208_ldo_match + i;
|
||||
init_data = match->init_data;
|
||||
rdesc = (struct rtq2208_regulator_desc *)match->driver_data;
|
||||
|
||||
if (!init_data || !rdesc)
|
||||
continue;
|
||||
|
||||
if (init_data->constraints.min_uV == init_data->constraints.max_uV)
|
||||
rdesc->desc.fixed_uV = init_data->constraints.min_uV;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void rtq2208_init_regulator_desc(struct rtq2208_regulator_desc *rdesc, int mtp_sel,
|
||||
int idx, struct of_regulator_match *rtq2208_ldo_match, int *ldo_idx)
|
||||
{
|
||||
struct regulator_desc *desc;
|
||||
static const struct {
|
||||
char *name;
|
||||
int base;
|
||||
} regulator_info[] = {
|
||||
RTQ2208_REGULATOR_INFO(buck-b, BUCK_RG_BASE(B)),
|
||||
RTQ2208_REGULATOR_INFO(buck-c, BUCK_RG_BASE(C)),
|
||||
RTQ2208_REGULATOR_INFO(buck-d, BUCK_RG_BASE(D)),
|
||||
RTQ2208_REGULATOR_INFO(buck-a, BUCK_RG_BASE(A)),
|
||||
RTQ2208_REGULATOR_INFO(buck-f, BUCK_RG_BASE(F)),
|
||||
RTQ2208_REGULATOR_INFO(buck-g, BUCK_RG_BASE(G)),
|
||||
RTQ2208_REGULATOR_INFO(buck-h, BUCK_RG_BASE(H)),
|
||||
RTQ2208_REGULATOR_INFO(buck-e, BUCK_RG_BASE(E)),
|
||||
RTQ2208_REGULATOR_INFO(ldo2, LDO_RG_BASE(2)),
|
||||
RTQ2208_REGULATOR_INFO(ldo1, LDO_RG_BASE(1)),
|
||||
}, *curr_info;
|
||||
|
||||
curr_info = regulator_info + idx;
|
||||
desc = &rdesc->desc;
|
||||
desc->name = curr_info->name;
|
||||
desc->of_match = of_match_ptr(curr_info->name);
|
||||
desc->regulators_node = of_match_ptr("regulators");
|
||||
desc->id = idx;
|
||||
desc->owner = THIS_MODULE;
|
||||
desc->type = REGULATOR_VOLTAGE;
|
||||
desc->enable_mask = mtp_sel ? MTP_SEL_MASK(1) : MTP_SEL_MASK(0);
|
||||
desc->active_discharge_on = RTQ2208_EN_DIS_MASK;
|
||||
desc->active_discharge_off = 0;
|
||||
desc->active_discharge_mask = RTQ2208_EN_DIS_MASK;
|
||||
|
||||
rdesc->mode_mask = RTQ2208_BUCK_NRMODE_MASK;
|
||||
|
||||
if (idx >= RTQ2208_BUCK_B && idx <= RTQ2208_BUCK_E) {
|
||||
/* init buck desc */
|
||||
desc->enable_reg = BUCK_RG_SHIFT(curr_info->base, 2);
|
||||
desc->ops = &rtq2208_regulator_buck_ops;
|
||||
desc->vsel_reg = curr_info->base + VSEL_SHIFT(mtp_sel);
|
||||
desc->vsel_mask = RTQ2208_BUCK_NR_MTP_SEL_MASK;
|
||||
desc->n_voltages = RTQ2208_VOUT_MAXNUM;
|
||||
desc->linear_ranges = rtq2208_vout_range;
|
||||
desc->n_linear_ranges = ARRAY_SIZE(rtq2208_vout_range);
|
||||
desc->ramp_reg = BUCK_RG_SHIFT(curr_info->base, 5);
|
||||
desc->active_discharge_reg = curr_info->base;
|
||||
desc->of_map_mode = rtq2208_of_map_mode;
|
||||
|
||||
rdesc->mode_reg = BUCK_RG_SHIFT(curr_info->base, 2);
|
||||
rdesc->suspend_config_reg = BUCK_RG_SHIFT(curr_info->base, 4);
|
||||
rdesc->suspend_enable_mask = RTQ2208_BUCK_EN_STR_MASK;
|
||||
rdesc->suspend_mode_mask = RTQ2208_BUCK_STRMODE_MASK;
|
||||
} else {
|
||||
/* init ldo desc */
|
||||
desc->enable_reg = curr_info->base;
|
||||
desc->ops = &rtq2208_regulator_ldo_ops;
|
||||
desc->n_voltages = 1;
|
||||
desc->active_discharge_reg = LDO_RG_SHIFT(curr_info->base, 2);
|
||||
|
||||
rtq2208_ldo_match[*ldo_idx].name = desc->name;
|
||||
rtq2208_ldo_match[*ldo_idx].driver_data = rdesc;
|
||||
rtq2208_ldo_match[(*ldo_idx)++].desc = desc;
|
||||
|
||||
rdesc->suspend_config_reg = curr_info->base;
|
||||
rdesc->suspend_enable_mask = RTQ2208_LDO_EN_STR_MASK;
|
||||
}
|
||||
}
|
||||
|
||||
static int rtq2208_parse_regulator_dt_data(int n_regulator, const unsigned int *regulator_idx_table,
|
||||
struct rtq2208_regulator_desc *rdesc[RTQ2208_LDO_MAX], struct device *dev)
|
||||
{
|
||||
struct of_regulator_match rtq2208_ldo_match[2];
|
||||
int mtp_sel, ret, i, idx, ldo_idx = 0;
|
||||
|
||||
/* get mtp_sel0 or mtp_sel1 */
|
||||
mtp_sel = device_property_read_bool(dev, "richtek,mtp-sel-high");
|
||||
|
||||
for (i = 0; i < n_regulator; i++) {
|
||||
idx = regulator_idx_table[i];
|
||||
|
||||
rdesc[i] = devm_kcalloc(dev, 1, sizeof(*rdesc[0]), GFP_KERNEL);
|
||||
if (!rdesc[i])
|
||||
return -ENOMEM;
|
||||
|
||||
rtq2208_init_regulator_desc(rdesc[i], mtp_sel, idx, rtq2208_ldo_match, &ldo_idx);
|
||||
}
|
||||
|
||||
/* init ldo fixed_uV */
|
||||
ret = rtq2208_of_get_fixed_voltage(dev, rtq2208_ldo_match, ldo_idx);
|
||||
if (ret)
|
||||
return dev_err_probe(dev, ret, "Failed to get ldo fixed_uV\n");
|
||||
|
||||
return 0;
|
||||
|
||||
}
|
||||
|
||||
/** different slave address corresponds different used bucks
|
||||
* slave address 0x10: BUCK[BCA FGE]
|
||||
* slave address 0x20: BUCK[BC FGHE]
|
||||
* slave address 0x40: BUCK[C G]
|
||||
*/
|
||||
static int rtq2208_regulator_check(int slave_addr, int *num,
|
||||
int *regulator_idx_table, unsigned int *buck_masks)
|
||||
{
|
||||
static bool rtq2208_used_table[3][RTQ2208_LDO_MAX] = {
|
||||
/* BUCK[BCA FGE], LDO[12] */
|
||||
{1, 1, 0, 1, 1, 1, 0, 1, 1, 1},
|
||||
/* BUCK[BC FGHE], LDO[12]*/
|
||||
{1, 1, 0, 0, 1, 1, 1, 1, 1, 1},
|
||||
/* BUCK[C G], LDO[12] */
|
||||
{0, 1, 0, 0, 0, 1, 0, 0, 1, 1},
|
||||
};
|
||||
int i, idx = ffs(slave_addr >> 4) - 1;
|
||||
u8 mask;
|
||||
|
||||
for (i = 0; i < RTQ2208_LDO_MAX; i++) {
|
||||
if (!rtq2208_used_table[idx][i])
|
||||
continue;
|
||||
|
||||
regulator_idx_table[(*num)++] = i;
|
||||
|
||||
mask = RTQ2208_BUCK_MASK(4 * i, 4 * i + 1);
|
||||
buck_masks[i >> 1] &= ~mask;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct regmap_config rtq2208_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = 0xEF,
|
||||
};
|
||||
|
||||
static int rtq2208_probe(struct i2c_client *i2c)
|
||||
{
|
||||
struct device *dev = &i2c->dev;
|
||||
struct regmap *regmap;
|
||||
struct rtq2208_regulator_desc *rdesc[RTQ2208_LDO_MAX];
|
||||
struct regulator_dev *rdev;
|
||||
struct regulator_config cfg;
|
||||
struct rtq2208_rdev_map *rdev_map;
|
||||
int i, ret = 0, idx, n_regulator = 0;
|
||||
unsigned int regulator_idx_table[RTQ2208_LDO_MAX],
|
||||
buck_masks[RTQ2208_BUCK_NUM_IRQ_REGS] = {0x33, 0x33, 0x33, 0x33, 0x33};
|
||||
|
||||
rdev_map = devm_kzalloc(dev, sizeof(struct rtq2208_rdev_map), GFP_KERNEL);
|
||||
if (!rdev_map)
|
||||
return -ENOMEM;
|
||||
|
||||
regmap = devm_regmap_init_i2c(i2c, &rtq2208_regmap_config);
|
||||
if (IS_ERR(regmap))
|
||||
return dev_err_probe(dev, PTR_ERR(regmap), "Failed to allocate regmap\n");
|
||||
|
||||
/* get needed regulator */
|
||||
ret = rtq2208_regulator_check(i2c->addr, &n_regulator, regulator_idx_table, buck_masks);
|
||||
if (ret)
|
||||
return dev_err_probe(dev, ret, "Failed to check used regulators\n");
|
||||
|
||||
rdev_map->regmap = regmap;
|
||||
rdev_map->dev = dev;
|
||||
|
||||
cfg.dev = dev;
|
||||
|
||||
/* init regulator desc */
|
||||
ret = rtq2208_parse_regulator_dt_data(n_regulator, regulator_idx_table, rdesc, dev);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < n_regulator; i++) {
|
||||
idx = regulator_idx_table[i];
|
||||
|
||||
/* register regulator */
|
||||
rdev = devm_regulator_register(dev, &rdesc[i]->desc, &cfg);
|
||||
if (IS_ERR(rdev))
|
||||
return PTR_ERR(rdev);
|
||||
|
||||
rdev_map->rdev[idx] = rdev;
|
||||
}
|
||||
|
||||
/* init interrupt mask */
|
||||
ret = rtq2208_init_irq_mask(rdev_map, buck_masks);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* register interrupt */
|
||||
return devm_request_threaded_irq(dev, i2c->irq, NULL, rtq2208_irq_handler,
|
||||
IRQF_ONESHOT, dev_name(dev), rdev_map);
|
||||
}
|
||||
|
||||
static const struct of_device_id rtq2208_device_tables[] = {
|
||||
{ .compatible = "richtek,rtq2208" },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, rtq2208_device_tables);
|
||||
|
||||
static struct i2c_driver rtq2208_driver = {
|
||||
.driver = {
|
||||
.name = "rtq2208",
|
||||
.of_match_table = rtq2208_device_tables,
|
||||
},
|
||||
.probe_new = rtq2208_probe,
|
||||
};
|
||||
module_i2c_driver(rtq2208_driver);
|
||||
|
||||
MODULE_AUTHOR("Alina Yu <alina_yu@richtek.com>");
|
||||
MODULE_DESCRIPTION("Richtek RTQ2208 Regulator Driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user