pinctrl: qcom: sm8650-lpass-lpi: add SM8650 LPASS
Add driver for the pin controller in Low Power Audio SubSystem (LPASS) of Qualcomm SM8650 SoC. Notable differences against SM8550 LPASS pin controller: 1. Additional address space for slew rate thus driver uses LPI_FLAG_SLEW_RATE_SAME_REG and sets slew rate via different register. 2. Two new pin mux functions: qca_swr_clk and qca_swr_data Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231027093615.140656-3-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Krzysztof Kozlowski
Linus Walleij
parent
2220638d37
commit
c4e4767385
@ -124,4 +124,14 @@ config PINCTRL_SM8550_LPASS_LPI
|
||||
(Low Power Island) found on the Qualcomm Technologies Inc SM8550
|
||||
platform.
|
||||
|
||||
config PINCTRL_SM8650_LPASS_LPI
|
||||
tristate "Qualcomm Technologies Inc SM8550 LPASS LPI pin controller driver"
|
||||
depends on ARM64 || COMPILE_TEST
|
||||
depends on PINCTRL_LPASS_LPI
|
||||
help
|
||||
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
|
||||
Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
|
||||
(Low Power Island) found on the Qualcomm Technologies Inc SM8650
|
||||
platform.
|
||||
|
||||
endif
|
||||
|
||||
@ -58,5 +58,6 @@ obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o
|
||||
obj-$(CONFIG_PINCTRL_SM8450_LPASS_LPI) += pinctrl-sm8450-lpass-lpi.o
|
||||
obj-$(CONFIG_PINCTRL_SM8550) += pinctrl-sm8550.o
|
||||
obj-$(CONFIG_PINCTRL_SM8550_LPASS_LPI) += pinctrl-sm8550-lpass-lpi.o
|
||||
obj-$(CONFIG_PINCTRL_SM8650_LPASS_LPI) += pinctrl-sm8650-lpass-lpi.o
|
||||
obj-$(CONFIG_PINCTRL_SC8280XP_LPASS_LPI) += pinctrl-sc8280xp-lpass-lpi.o
|
||||
obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
|
||||
|
||||
255
drivers/pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c
Normal file
255
drivers/pinctrl/qcom/pinctrl-sm8650-lpass-lpi.c
Normal file
@ -0,0 +1,255 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (c) 2022-2023 Linaro Ltd.
|
||||
*/
|
||||
|
||||
#include <linux/gpio/driver.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include "pinctrl-lpass-lpi.h"
|
||||
|
||||
enum lpass_lpi_functions {
|
||||
LPI_MUX_dmic1_clk,
|
||||
LPI_MUX_dmic1_data,
|
||||
LPI_MUX_dmic2_clk,
|
||||
LPI_MUX_dmic2_data,
|
||||
LPI_MUX_dmic3_clk,
|
||||
LPI_MUX_dmic3_data,
|
||||
LPI_MUX_dmic4_clk,
|
||||
LPI_MUX_dmic4_data,
|
||||
LPI_MUX_i2s0_clk,
|
||||
LPI_MUX_i2s0_data,
|
||||
LPI_MUX_i2s0_ws,
|
||||
LPI_MUX_i2s1_clk,
|
||||
LPI_MUX_i2s1_data,
|
||||
LPI_MUX_i2s1_ws,
|
||||
LPI_MUX_i2s2_clk,
|
||||
LPI_MUX_i2s2_data,
|
||||
LPI_MUX_i2s2_ws,
|
||||
LPI_MUX_i2s3_clk,
|
||||
LPI_MUX_i2s3_data,
|
||||
LPI_MUX_i2s3_ws,
|
||||
LPI_MUX_i2s4_clk,
|
||||
LPI_MUX_i2s4_data,
|
||||
LPI_MUX_i2s4_ws,
|
||||
LPI_MUX_qca_swr_clk,
|
||||
LPI_MUX_qca_swr_data,
|
||||
LPI_MUX_slimbus_clk,
|
||||
LPI_MUX_slimbus_data,
|
||||
LPI_MUX_swr_rx_clk,
|
||||
LPI_MUX_swr_rx_data,
|
||||
LPI_MUX_swr_tx_clk,
|
||||
LPI_MUX_swr_tx_data,
|
||||
LPI_MUX_wsa_swr_clk,
|
||||
LPI_MUX_wsa_swr_data,
|
||||
LPI_MUX_wsa2_swr_clk,
|
||||
LPI_MUX_wsa2_swr_data,
|
||||
LPI_MUX_ext_mclk1_a,
|
||||
LPI_MUX_ext_mclk1_b,
|
||||
LPI_MUX_ext_mclk1_c,
|
||||
LPI_MUX_ext_mclk1_d,
|
||||
LPI_MUX_ext_mclk1_e,
|
||||
LPI_MUX_gpio,
|
||||
LPI_MUX__,
|
||||
};
|
||||
|
||||
static int gpio0_pins[] = { 0 };
|
||||
static int gpio1_pins[] = { 1 };
|
||||
static int gpio2_pins[] = { 2 };
|
||||
static int gpio3_pins[] = { 3 };
|
||||
static int gpio4_pins[] = { 4 };
|
||||
static int gpio5_pins[] = { 5 };
|
||||
static int gpio6_pins[] = { 6 };
|
||||
static int gpio7_pins[] = { 7 };
|
||||
static int gpio8_pins[] = { 8 };
|
||||
static int gpio9_pins[] = { 9 };
|
||||
static int gpio10_pins[] = { 10 };
|
||||
static int gpio11_pins[] = { 11 };
|
||||
static int gpio12_pins[] = { 12 };
|
||||
static int gpio13_pins[] = { 13 };
|
||||
static int gpio14_pins[] = { 14 };
|
||||
static int gpio15_pins[] = { 15 };
|
||||
static int gpio16_pins[] = { 16 };
|
||||
static int gpio17_pins[] = { 17 };
|
||||
static int gpio18_pins[] = { 18 };
|
||||
static int gpio19_pins[] = { 19 };
|
||||
static int gpio20_pins[] = { 20 };
|
||||
static int gpio21_pins[] = { 21 };
|
||||
static int gpio22_pins[] = { 22 };
|
||||
|
||||
static const struct pinctrl_pin_desc sm8650_lpi_pins[] = {
|
||||
PINCTRL_PIN(0, "gpio0"),
|
||||
PINCTRL_PIN(1, "gpio1"),
|
||||
PINCTRL_PIN(2, "gpio2"),
|
||||
PINCTRL_PIN(3, "gpio3"),
|
||||
PINCTRL_PIN(4, "gpio4"),
|
||||
PINCTRL_PIN(5, "gpio5"),
|
||||
PINCTRL_PIN(6, "gpio6"),
|
||||
PINCTRL_PIN(7, "gpio7"),
|
||||
PINCTRL_PIN(8, "gpio8"),
|
||||
PINCTRL_PIN(9, "gpio9"),
|
||||
PINCTRL_PIN(10, "gpio10"),
|
||||
PINCTRL_PIN(11, "gpio11"),
|
||||
PINCTRL_PIN(12, "gpio12"),
|
||||
PINCTRL_PIN(13, "gpio13"),
|
||||
PINCTRL_PIN(14, "gpio14"),
|
||||
PINCTRL_PIN(15, "gpio15"),
|
||||
PINCTRL_PIN(16, "gpio16"),
|
||||
PINCTRL_PIN(17, "gpio17"),
|
||||
PINCTRL_PIN(18, "gpio18"),
|
||||
PINCTRL_PIN(19, "gpio19"),
|
||||
PINCTRL_PIN(20, "gpio20"),
|
||||
PINCTRL_PIN(21, "gpio21"),
|
||||
PINCTRL_PIN(22, "gpio22"),
|
||||
};
|
||||
|
||||
static const char * const gpio_groups[] = {
|
||||
"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
|
||||
"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
|
||||
"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
|
||||
"gpio22",
|
||||
};
|
||||
|
||||
static const char * const dmic1_clk_groups[] = { "gpio6" };
|
||||
static const char * const dmic1_data_groups[] = { "gpio7" };
|
||||
static const char * const dmic2_clk_groups[] = { "gpio8" };
|
||||
static const char * const dmic2_data_groups[] = { "gpio9" };
|
||||
static const char * const dmic3_clk_groups[] = { "gpio12" };
|
||||
static const char * const dmic3_data_groups[] = { "gpio13" };
|
||||
static const char * const dmic4_clk_groups[] = { "gpio17" };
|
||||
static const char * const dmic4_data_groups[] = { "gpio18" };
|
||||
static const char * const i2s0_clk_groups[] = { "gpio0" };
|
||||
static const char * const i2s0_ws_groups[] = { "gpio1" };
|
||||
static const char * const i2s0_data_groups[] = { "gpio2", "gpio3", "gpio4", "gpio5" };
|
||||
static const char * const i2s1_clk_groups[] = { "gpio6" };
|
||||
static const char * const i2s1_ws_groups[] = { "gpio7" };
|
||||
static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
|
||||
static const char * const i2s2_clk_groups[] = { "gpio10" };
|
||||
static const char * const i2s2_ws_groups[] = { "gpio11" };
|
||||
static const char * const i2s2_data_groups[] = { "gpio15", "gpio16" };
|
||||
static const char * const i2s3_clk_groups[] = { "gpio12" };
|
||||
static const char * const i2s3_ws_groups[] = { "gpio13" };
|
||||
static const char * const i2s3_data_groups[] = { "gpio17", "gpio18" };
|
||||
static const char * const i2s4_clk_groups[] = { "gpio19"};
|
||||
static const char * const i2s4_ws_groups[] = { "gpio20"};
|
||||
static const char * const i2s4_data_groups[] = { "gpio21", "gpio22"};
|
||||
static const char * const qca_swr_clk_groups[] = { "gpio19" };
|
||||
static const char * const qca_swr_data_groups[] = { "gpio20" };
|
||||
static const char * const slimbus_clk_groups[] = { "gpio19"};
|
||||
static const char * const slimbus_data_groups[] = { "gpio20"};
|
||||
static const char * const swr_tx_clk_groups[] = { "gpio0" };
|
||||
static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" };
|
||||
static const char * const swr_rx_clk_groups[] = { "gpio3" };
|
||||
static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5", "gpio15" };
|
||||
static const char * const wsa_swr_clk_groups[] = { "gpio10" };
|
||||
static const char * const wsa_swr_data_groups[] = { "gpio11" };
|
||||
static const char * const wsa2_swr_clk_groups[] = { "gpio15" };
|
||||
static const char * const wsa2_swr_data_groups[] = { "gpio16" };
|
||||
static const char * const ext_mclk1_c_groups[] = { "gpio5" };
|
||||
static const char * const ext_mclk1_b_groups[] = { "gpio9" };
|
||||
static const char * const ext_mclk1_a_groups[] = { "gpio13" };
|
||||
static const char * const ext_mclk1_d_groups[] = { "gpio14" };
|
||||
static const char * const ext_mclk1_e_groups[] = { "gpio22" };
|
||||
|
||||
static const struct lpi_pingroup sm8650_groups[] = {
|
||||
LPI_PINGROUP(0, 11, swr_tx_clk, i2s0_clk, _, _),
|
||||
LPI_PINGROUP(1, 11, swr_tx_data, i2s0_ws, _, _),
|
||||
LPI_PINGROUP(2, 11, swr_tx_data, i2s0_data, _, _),
|
||||
LPI_PINGROUP(3, 11, swr_rx_clk, i2s0_data, _, _),
|
||||
LPI_PINGROUP(4, 11, swr_rx_data, i2s0_data, _, _),
|
||||
LPI_PINGROUP(5, 11, swr_rx_data, ext_mclk1_c, i2s0_data, _),
|
||||
LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _),
|
||||
LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
|
||||
LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
|
||||
LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, ext_mclk1_b, _),
|
||||
LPI_PINGROUP(10, 11, i2s2_clk, wsa_swr_clk, _, _),
|
||||
LPI_PINGROUP(11, 11, i2s2_ws, wsa_swr_data, _, _),
|
||||
LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s3_clk, _, _),
|
||||
LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s3_ws, ext_mclk1_a, _),
|
||||
LPI_PINGROUP(14, 11, swr_tx_data, ext_mclk1_d, _, _),
|
||||
LPI_PINGROUP(15, 11, i2s2_data, wsa2_swr_clk, _, _),
|
||||
LPI_PINGROUP(16, 11, i2s2_data, wsa2_swr_data, _, _),
|
||||
LPI_PINGROUP(17, LPI_NO_SLEW, dmic4_clk, i2s3_data, _, _),
|
||||
LPI_PINGROUP(18, LPI_NO_SLEW, dmic4_data, i2s3_data, _, _),
|
||||
LPI_PINGROUP(19, 11, i2s4_clk, slimbus_clk, qca_swr_clk, _),
|
||||
LPI_PINGROUP(20, 11, i2s4_ws, slimbus_data, qca_swr_data, _),
|
||||
LPI_PINGROUP(21, LPI_NO_SLEW, i2s4_data, _, _, _),
|
||||
LPI_PINGROUP(22, LPI_NO_SLEW, i2s4_data, ext_mclk1_e, _, _),
|
||||
};
|
||||
|
||||
static const struct lpi_function sm8650_functions[] = {
|
||||
LPI_FUNCTION(gpio),
|
||||
LPI_FUNCTION(dmic1_clk),
|
||||
LPI_FUNCTION(dmic1_data),
|
||||
LPI_FUNCTION(dmic2_clk),
|
||||
LPI_FUNCTION(dmic2_data),
|
||||
LPI_FUNCTION(dmic3_clk),
|
||||
LPI_FUNCTION(dmic3_data),
|
||||
LPI_FUNCTION(dmic4_clk),
|
||||
LPI_FUNCTION(dmic4_data),
|
||||
LPI_FUNCTION(i2s0_clk),
|
||||
LPI_FUNCTION(i2s0_data),
|
||||
LPI_FUNCTION(i2s0_ws),
|
||||
LPI_FUNCTION(i2s1_clk),
|
||||
LPI_FUNCTION(i2s1_data),
|
||||
LPI_FUNCTION(i2s1_ws),
|
||||
LPI_FUNCTION(i2s2_clk),
|
||||
LPI_FUNCTION(i2s2_data),
|
||||
LPI_FUNCTION(i2s2_ws),
|
||||
LPI_FUNCTION(i2s3_clk),
|
||||
LPI_FUNCTION(i2s3_data),
|
||||
LPI_FUNCTION(i2s3_ws),
|
||||
LPI_FUNCTION(i2s4_clk),
|
||||
LPI_FUNCTION(i2s4_data),
|
||||
LPI_FUNCTION(i2s4_ws),
|
||||
LPI_FUNCTION(qca_swr_clk),
|
||||
LPI_FUNCTION(qca_swr_data),
|
||||
LPI_FUNCTION(slimbus_clk),
|
||||
LPI_FUNCTION(slimbus_data),
|
||||
LPI_FUNCTION(swr_rx_clk),
|
||||
LPI_FUNCTION(swr_rx_data),
|
||||
LPI_FUNCTION(swr_tx_clk),
|
||||
LPI_FUNCTION(swr_tx_data),
|
||||
LPI_FUNCTION(wsa_swr_clk),
|
||||
LPI_FUNCTION(wsa_swr_data),
|
||||
LPI_FUNCTION(wsa2_swr_clk),
|
||||
LPI_FUNCTION(wsa2_swr_data),
|
||||
LPI_FUNCTION(ext_mclk1_a),
|
||||
LPI_FUNCTION(ext_mclk1_b),
|
||||
LPI_FUNCTION(ext_mclk1_c),
|
||||
LPI_FUNCTION(ext_mclk1_d),
|
||||
LPI_FUNCTION(ext_mclk1_e),
|
||||
};
|
||||
|
||||
static const struct lpi_pinctrl_variant_data sm8650_lpi_data = {
|
||||
.pins = sm8650_lpi_pins,
|
||||
.npins = ARRAY_SIZE(sm8650_lpi_pins),
|
||||
.groups = sm8650_groups,
|
||||
.ngroups = ARRAY_SIZE(sm8650_groups),
|
||||
.functions = sm8650_functions,
|
||||
.nfunctions = ARRAY_SIZE(sm8650_functions),
|
||||
.flags = LPI_FLAG_SLEW_RATE_SAME_REG,
|
||||
};
|
||||
|
||||
static const struct of_device_id lpi_pinctrl_of_match[] = {
|
||||
{
|
||||
.compatible = "qcom,sm8650-lpass-lpi-pinctrl",
|
||||
.data = &sm8650_lpi_data,
|
||||
},
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
|
||||
|
||||
static struct platform_driver lpi_pinctrl_driver = {
|
||||
.driver = {
|
||||
.name = "qcom-sm8650-lpass-lpi-pinctrl",
|
||||
.of_match_table = lpi_pinctrl_of_match,
|
||||
},
|
||||
.probe = lpi_pinctrl_probe,
|
||||
.remove_new = lpi_pinctrl_remove,
|
||||
};
|
||||
|
||||
module_platform_driver(lpi_pinctrl_driver);
|
||||
MODULE_DESCRIPTION("Qualcomm SM8650 LPI GPIO pin control driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user