From becbd16ed2f8f427239ffda66b5d894008bc56af Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 27 Jun 2024 07:50:48 -0700 Subject: [PATCH] hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4 After setting fan1_target and setting pwm1_enable to 4, the fan controller tries to achieve the requested fan speed. Reviewed-by: Quentin Schulz Signed-off-by: Guenter Roeck --- Documentation/hwmon/amc6821.rst | 4 ++++ drivers/hwmon/amc6821.c | 25 +++++++++++++++++-------- 2 files changed, 21 insertions(+), 8 deletions(-) diff --git a/Documentation/hwmon/amc6821.rst b/Documentation/hwmon/amc6821.rst index 4ce67c268e52..96e604c5ea8e 100644 --- a/Documentation/hwmon/amc6821.rst +++ b/Documentation/hwmon/amc6821.rst @@ -48,12 +48,16 @@ fan1_min rw " fan1_max rw " fan1_fault ro " fan1_pulses rw Pulses per revolution can be either 2 or 4. +fan1_target rw Target fan speed, to be used with pwm1_enable + mode 4. pwm1 rw pwm1 pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled by remote temperature, 3=fan controlled by combination of the on-chip temperature and remote-sensor temperature, + 4=fan controlled by target rpm set with + fan1_target attribute. pwm1_auto_channels_temp ro 1 if pwm_enable==2, 3 if pwm_enable==3 pwm1_auto_point1_pwm ro Hardwired to 0, shared for both temperature channels. diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c index 39bf52a5c432..9e9a70afbfd4 100644 --- a/drivers/hwmon/amc6821.c +++ b/drivers/hwmon/amc6821.c @@ -66,6 +66,8 @@ enum chips { amc6821 }; #define AMC6821_REG_TACH_LLIMITH 0x11 #define AMC6821_REG_TACH_HLIMITL 0x12 #define AMC6821_REG_TACH_HLIMITH 0x13 +#define AMC6821_REG_TACH_SETTINGL 0x1e +#define AMC6821_REG_TACH_SETTINGH 0x1f #define AMC6821_CONF1_START 0x01 #define AMC6821_CONF1_FAN_INT_EN 0x02 @@ -122,17 +124,18 @@ static const u8 temp_reg[] = {AMC6821_REG_LTEMP_HI, AMC6821_REG_RTEMP_LIMIT_MAX, AMC6821_REG_RTEMP_CRIT, }; -enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX, +enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX, IDX_FAN1_TARGET, FAN1_IDX_LEN, }; static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW, AMC6821_REG_TACH_LLIMITL, - AMC6821_REG_TACH_HLIMITL, }; - + AMC6821_REG_TACH_HLIMITL, + AMC6821_REG_TACH_SETTINGL, }; static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI, AMC6821_REG_TACH_LLIMITH, - AMC6821_REG_TACH_HLIMITH, }; + AMC6821_REG_TACH_HLIMITH, + AMC6821_REG_TACH_SETTINGH, }; /* * Client data (each client gets its own) @@ -250,10 +253,10 @@ static struct amc6821_data *amc6821_update_device(struct device *dev) break; case 1: /* * semi-open loop: software sets rpm, chip controls - * pwm1, currently not implemented + * pwm1 */ data->pwm1_auto_channels_temp = 0; - data->pwm1_enable = 0; + data->pwm1_enable = 4; break; } @@ -407,6 +410,10 @@ static ssize_t pwm1_enable_store(struct device *dev, config |= AMC6821_CONF1_FDRC0; config |= AMC6821_CONF1_FDRC1; break; + case 4: + config |= AMC6821_CONF1_FDRC0; + config &= ~AMC6821_CONF1_FDRC1; + break; default: count = -EINVAL; goto unlock; @@ -622,8 +629,8 @@ static ssize_t fan_store(struct device *dev, struct device_attribute *attr, if (ret) return ret; - /* The minimum fan speed must not be unlimited (0) */ - if (ix == IDX_FAN1_MIN && !val) + /* Minimum and target fan speed must not be unlimited (0) */ + if ((ix == IDX_FAN1_MIN || ix == IDX_FAN1_TARGET) && !val) return -EINVAL; val = val > 0 ? 6000000 / clamp_val(val, 1, 6000000) : 0; @@ -713,6 +720,7 @@ static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, temp_alarm, IDX_TEMP2_CRIT); static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, IDX_FAN1_INPUT); static SENSOR_DEVICE_ATTR_RW(fan1_min, fan, IDX_FAN1_MIN); static SENSOR_DEVICE_ATTR_RW(fan1_max, fan, IDX_FAN1_MAX); +static SENSOR_DEVICE_ATTR_RW(fan1_target, fan, IDX_FAN1_TARGET); static SENSOR_DEVICE_ATTR_RO(fan1_fault, fan1_fault, 0); static SENSOR_DEVICE_ATTR_RW(fan1_pulses, fan1_pulses, 0); @@ -756,6 +764,7 @@ static struct attribute *amc6821_attrs[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_fan1_min.dev_attr.attr, &sensor_dev_attr_fan1_max.dev_attr.attr, + &sensor_dev_attr_fan1_target.dev_attr.attr, &sensor_dev_attr_fan1_fault.dev_attr.attr, &sensor_dev_attr_fan1_pulses.dev_attr.attr, &sensor_dev_attr_pwm1.dev_attr.attr,