From bf791751162ac875a9439426d13f8d4d18151549 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 24 Oct 2024 12:26:53 +0300 Subject: [PATCH 01/10] thunderbolt: Add only on-board retimers when !CONFIG_USB4_DEBUGFS_MARGINING Normally there is no need to enumerate retimers on the other side of the cable. This is only needed in special cases where user wants to run receiver lane margining against the downstream facing port of a retimer. Furthermore this might confuse the userspace tools such as fwupd because it cannot read the information it expects from these retimers. Fix this by changing the retimer enumeration code to add only on-board retimers when CONFIG_USB4_DEBUGFS_MARGINING is not enabled. Reported-by: AceLan Kao Tested-by: AceLan Kao Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219420 Cc: stable@vger.kernel.org Fixes: ff6ab055e070 ("thunderbolt: Add receiver lane margining support for retimers") Signed-off-by: Mika Westerberg --- drivers/thunderbolt/retimer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c index 721319329afa..bdf641489f82 100644 --- a/drivers/thunderbolt/retimer.c +++ b/drivers/thunderbolt/retimer.c @@ -531,6 +531,8 @@ int tb_retimer_scan(struct tb_port *port, bool add) max = i; ret = 0; + if (!IS_ENABLED(CONFIG_USB4_DEBUGFS_MARGINING)) + max = min(last_idx, max); /* Add retimers if they do not exist already */ for (i = 1; i <= max; i++) { From 393c74ccbd847bacf18865a01b422586fc7341cf Mon Sep 17 00:00:00 2001 From: Reinhard Speyerer Date: Fri, 18 Oct 2024 23:07:06 +0200 Subject: [PATCH 02/10] USB: serial: option: add Fibocom FG132 0x0112 composition Add Fibocom FG132 0x0112 composition: T: Bus=03 Lev=02 Prnt=06 Port=01 Cnt=02 Dev#= 10 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0112 Rev= 5.15 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom Module S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Reinhard Speyerer Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4f18f189f309..4eaab8b843c1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2320,6 +2320,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) }, /* Fibocom FM160 (MBIM mode) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0112, 0xff, 0xff, 0x30) }, /* Fibocom FG132 Diag */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0112, 0xff, 0xff, 0x40) }, /* Fibocom FG132 AT */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0112, 0xff, 0, 0) }, /* Fibocom FG132 NMEA */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0115, 0xff), /* Fibocom FM135 (laptop MBIM) */ .driver_info = RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */ From 3b05949ba39f305b585452d0e177470607842165 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Monin?= Date: Thu, 24 Oct 2024 17:09:19 +0200 Subject: [PATCH 03/10] USB: serial: option: add Quectel RG650V MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for Quectel RG650V which is based on Qualcomm SDX65 chip. The composition is DIAG / NMEA / AT / AT / QMI. T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0122 Rev=05.15 S: Manufacturer=Quectel S: Product=RG650V-EU S: SerialNumber=xxxxxxx C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=9ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=9ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=9ms Signed-off-by: Benoît Monin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4eaab8b843c1..9ba5584061c8 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -251,6 +251,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_VENDOR_ID 0x2c7c /* These Quectel products use Quectel's vendor ID */ #define QUECTEL_PRODUCT_EC21 0x0121 +#define QUECTEL_PRODUCT_RG650V 0x0122 #define QUECTEL_PRODUCT_EM061K_LTA 0x0123 #define QUECTEL_PRODUCT_EM061K_LMS 0x0124 #define QUECTEL_PRODUCT_EC25 0x0125 @@ -1273,6 +1274,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG912Y, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG916Q, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RG650V, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RG650V, 0xff, 0, 0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, From 37bb5628379295c1254c113a407cab03a0f4d0b4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 31 Oct 2024 12:48:30 +0300 Subject: [PATCH 04/10] USB: serial: io_edgeport: fix use after free in debug printk The "dev_dbg(&urb->dev->dev, ..." which happens after usb_free_urb(urb) is a use after free of the "urb" pointer. Store the "dev" pointer at the start of the function to avoid this issue. Fixes: 984f68683298 ("USB: serial: io_edgeport.c: remove dbg() usage") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Johan Hovold --- drivers/usb/serial/io_edgeport.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index c7d6b5e3f898..28c71d99e857 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -770,11 +770,12 @@ static void edge_bulk_out_data_callback(struct urb *urb) static void edge_bulk_out_cmd_callback(struct urb *urb) { struct edgeport_port *edge_port = urb->context; + struct device *dev = &urb->dev->dev; int status = urb->status; atomic_dec(&CmdUrbs); - dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n", - __func__, urb, atomic_read(&CmdUrbs)); + dev_dbg(dev, "%s - FREE URB %p (outstanding %d)\n", __func__, urb, + atomic_read(&CmdUrbs)); /* clean up the transfer buffer */ @@ -784,8 +785,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb) usb_free_urb(urb); if (status) { - dev_dbg(&urb->dev->dev, - "%s - nonzero write bulk status received: %d\n", + dev_dbg(dev, "%s - nonzero write bulk status received: %d\n", __func__, status); return; } From 498dbd9aea205db9da674994b74c7bf8e18448bd Mon Sep 17 00:00:00 2001 From: Zijun Hu Date: Tue, 29 Oct 2024 23:13:38 +0800 Subject: [PATCH 05/10] usb: musb: sunxi: Fix accessing an released usb phy Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") will cause that usb phy @glue->xceiv is accessed after released. 1) register platform driver @sunxi_musb_driver // get the usb phy @glue->xceiv sunxi_musb_probe() -> devm_usb_get_phy(). 2) register and unregister platform driver @musb_driver musb_probe() -> sunxi_musb_init() use the phy here //the phy is released here musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy() 3) register @musb_driver again musb_probe() -> sunxi_musb_init() use the phy here but the phy has been released at 2). ... Fixed by reverting the commit, namely, removing devm_usb_put_phy() from sunxi_musb_exit(). Fixes: 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu Link: https://lore.kernel.org/r/20241029-sunxi_fix-v1-1-9431ed2ab826@quicinc.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/sunxi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index d54283fd026b..05b6e7e52e02 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -293,8 +293,6 @@ static int sunxi_musb_exit(struct musb *musb) if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) sunxi_sram_release(musb->controller->parent); - devm_usb_put_phy(glue->dev, glue->xceiv); - return 0; } From 029778a4fd2c90c2e76a902b797c2348a722f1b8 Mon Sep 17 00:00:00 2001 From: Rex Nie Date: Wed, 30 Oct 2024 21:36:32 +0800 Subject: [PATCH 06/10] usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and txbuf_len are uninitialized. This commit stops to print uninitialized value and misleading/false data. Cc: stable@vger.kernel.org Fixes: a4422ff22142 (" usb: typec: qcom: Add Qualcomm PMIC Type-C driver") Signed-off-by: Rex Nie Reviewed-by: Heikki Krogerus Reviewed-by: Bjorn Andersson Acked-by: Bryan O'Donoghue Link: https://lore.kernel.org/r/20241030133632.2116-1-rex.nie@jaguarmicro.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c index 5b7f52b74a40..726423684bae 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c @@ -227,6 +227,10 @@ qcom_pmic_typec_pdphy_pd_transmit_payload(struct pmic_typec_pdphy *pmic_typec_pd spin_lock_irqsave(&pmic_typec_pdphy->lock, flags); + hdr_len = sizeof(msg->header); + txbuf_len = pd_header_cnt_le(msg->header) * 4; + txsize_len = hdr_len + txbuf_len - 1; + ret = regmap_read(pmic_typec_pdphy->regmap, pmic_typec_pdphy->base + USB_PDPHY_RX_ACKNOWLEDGE_REG, &val); @@ -244,10 +248,6 @@ qcom_pmic_typec_pdphy_pd_transmit_payload(struct pmic_typec_pdphy *pmic_typec_pd if (ret) goto done; - hdr_len = sizeof(msg->header); - txbuf_len = pd_header_cnt_le(msg->header) * 4; - txsize_len = hdr_len + txbuf_len - 1; - /* Write message header sizeof(u16) to USB_PDPHY_TX_BUFFER_HDR_REG */ ret = regmap_bulk_write(pmic_typec_pdphy->regmap, pmic_typec_pdphy->base + USB_PDPHY_TX_BUFFER_HDR_REG, From 9cfb31e4c89d200d8ab7cb1e0bb9e6e8d621ca0b Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 4 Nov 2024 16:00:11 +0200 Subject: [PATCH 07/10] usb: dwc3: fix fault at system suspend if device was already runtime suspended If the device was already runtime suspended then during system suspend we cannot access the device registers else it will crash. Also we cannot access any registers after dwc3_core_exit() on some platforms so move the dwc3_enable_susphy() call to the top. Cc: stable@vger.kernel.org # v5.15+ Reported-by: William McVicker Closes: https://lore.kernel.org/all/ZyVfcUuPq56R2m1Y@google.com Fixes: 705e3ce37bcc ("usb: dwc3: core: Fix system suspend on TI AM62 platforms") Signed-off-by: Roger Quadros Acked-by: Thinh Nguyen Tested-by: Will McVicker Link: https://lore.kernel.org/r/20241104-am62-lpm-usb-fix-v1-1-e93df73a4f0d@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 427e5660f87c..98114c2827c0 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -2342,10 +2342,18 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) u32 reg; int i; - dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) & - DWC3_GUSB2PHYCFG_SUSPHY) || - (dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)) & - DWC3_GUSB3PIPECTL_SUSPHY); + if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) { + dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) & + DWC3_GUSB2PHYCFG_SUSPHY) || + (dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)) & + DWC3_GUSB3PIPECTL_SUSPHY); + /* + * TI AM62 platform requires SUSPHY to be + * enabled for system suspend to work. + */ + if (!dwc->susphy_state) + dwc3_enable_susphy(dwc, true); + } switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: @@ -2398,15 +2406,6 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) break; } - if (!PMSG_IS_AUTO(msg)) { - /* - * TI AM62 platform requires SUSPHY to be - * enabled for system suspend to work. - */ - if (!dwc->susphy_state) - dwc3_enable_susphy(dwc, true); - } - return 0; } From 7dd08a0b4193087976db6b3ee7807de7e8316f96 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 4 Nov 2024 20:16:42 +0300 Subject: [PATCH 08/10] usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd() The "*cmd" variable can be controlled by the user via debugfs. That means "new_cam" can be as high as 255 while the size of the uc->updated[] array is UCSI_MAX_ALTMODES (30). The call tree is: ucsi_cmd() // val comes from simple_attr_write_xsigned() -> ucsi_send_command() -> ucsi_send_command_common() -> ucsi_run_command() // calls ucsi->ops->sync_control() -> ucsi_ccg_sync_control() Fixes: 170a6726d0e2 ("usb: typec: ucsi: add support for separate DP altmode devices") Cc: stable Signed-off-by: Dan Carpenter Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/325102b3-eaa8-4918-a947-22aca1146586@stanley.mountain Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi_ccg.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c index ba58d11907bc..bccfc03b5986 100644 --- a/drivers/usb/typec/ucsi/ucsi_ccg.c +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -482,6 +482,8 @@ static void ucsi_ccg_update_set_new_cam_cmd(struct ucsi_ccg *uc, port = uc->orig; new_cam = UCSI_SET_NEW_CAM_GET_AM(*cmd); + if (new_cam >= ARRAY_SIZE(uc->updated)) + return; new_port = &uc->updated[new_cam]; cam = new_port->linked_idx; enter_new_mode = UCSI_SET_NEW_CAM_ENTER(*cmd); From bd646c768a934d28e574ee940d6759c7954a024d Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 5 Nov 2024 09:19:02 +0200 Subject: [PATCH 09/10] thunderbolt: Fix connection issue with Pluggable UD-4VPD dock Rick reported that his Pluggable USB4 dock does not work anymore after upgrading to v6.10 kernel. It looks like commit c6ca1ac9f472 ("thunderbolt: Increase sideband access polling delay") makes the device router enumeration happen later than what might be expected by the dock (although there is no such limit in the USB4 spec) which probably makes it assume there is something wrong with the high-speed link and reset it. After the link is reset the same issue happens again and again. For this reason lower the sideband access delay from 5ms to 1ms. This seems to work fine according to Rick's testing. Reported-by: Rick Lahaye Closes: https://lore.kernel.org/linux-usb/000f01db247b$d10e1520$732a3f60$@581238.xyz/ Tested-by: Rick Lahaye Fixes: c6ca1ac9f472 ("thunderbolt: Increase sideband access polling delay") Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman Reviewed-by: Mario Limonciello Signed-off-by: Mika Westerberg --- drivers/thunderbolt/usb4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index 0a9b4aeb3fa1..402fdf8b1cde 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -48,7 +48,7 @@ enum usb4_ba_index { /* Delays in us used with usb4_port_wait_for_bit() */ #define USB4_PORT_DELAY 50 -#define USB4_PORT_SB_DELAY 5000 +#define USB4_PORT_SB_DELAY 1000 static int usb4_native_switch_op(struct tb_switch *sw, u16 opcode, u32 *metadata, u8 *status, From 25eb47eed52979c2f5eee3f37e6c67714e02c49c Mon Sep 17 00:00:00 2001 From: Jack Wu Date: Wed, 6 Nov 2024 18:50:29 +0800 Subject: [PATCH 10/10] USB: serial: qcserial: add support for Sierra Wireless EM86xx Add support for Sierra Wireless EM86xx with USB-id 0x1199:0x90e5 and 0x1199:0x90e4. 0x1199:0x90e5 T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90e5 Rev= 5.15 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Semtech EM8695 Mobile Broadband Adapter S: SerialNumber=004403161882339 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#=12 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#=12 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#=13 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#=13 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x1199:0x90e4 T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90e4 Rev= 0.00 S: Manufacturer=Sierra Wireless, Incorporated S: SerialNumber=004403161882339 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jack Wu Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/qcserial.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index c7de9585feb2..13c664317a05 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -166,6 +166,8 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */ {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */ {DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */ + {DEVICE_SWI(0x1199, 0x90e4)}, /* Sierra Wireless EM86xx QDL*/ + {DEVICE_SWI(0x1199, 0x90e5)}, /* Sierra Wireless EM86xx */ {DEVICE_SWI(0x1199, 0xc080)}, /* Sierra Wireless EM7590 QDL */ {DEVICE_SWI(0x1199, 0xc081)}, /* Sierra Wireless EM7590 */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */