From a266ef69b890f099069cf51bb40572611c435a54 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 29 Jan 2023 15:10:48 -0800 Subject: [PATCH] Documentation: networking: correct spelling Correct spelling problems for Documentation/networking/ as reported by codespell. Signed-off-by: Randy Dunlap Cc: Jonathan Corbet Cc: linux-doc@vger.kernel.org Cc: Jiri Pirko Cc: "David S. Miller" Cc: Eric Dumazet Cc: Jakub Kicinski Cc: Paolo Abeni Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20230129231053.20863-5-rdunlap@infradead.org Signed-off-by: Paolo Abeni --- Documentation/networking/af_xdp.rst | 4 ++-- Documentation/networking/arcnet-hardware.rst | 2 +- Documentation/networking/can.rst | 2 +- Documentation/networking/can_ucan_protocol.rst | 2 +- Documentation/networking/cdc_mbim.rst | 2 +- Documentation/networking/device_drivers/atm/iphase.rst | 2 +- .../networking/device_drivers/can/ctu/ctucanfd-driver.rst | 4 ++-- .../device_drivers/can/ctu/fsm_txt_buffer_user.svg | 4 ++-- .../networking/device_drivers/ethernet/3com/vortex.rst | 2 +- .../device_drivers/ethernet/aquantia/atlantic.rst | 6 +++--- .../ethernet/freescale/dpaa2/mac-phy-support.rst | 2 +- .../device_drivers/ethernet/marvell/octeontx2.rst | 2 +- .../networking/device_drivers/ethernet/pensando/ionic.rst | 2 +- .../device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst | 2 +- .../device_drivers/ethernet/ti/cpsw_switchdev.rst | 2 +- Documentation/networking/device_drivers/wwan/iosm.rst | 2 +- Documentation/networking/devlink/ice.rst | 4 ++-- Documentation/networking/devlink/netdevsim.rst | 2 +- Documentation/networking/devlink/prestera.rst | 2 +- Documentation/networking/dsa/configuration.rst | 2 +- Documentation/networking/ethtool-netlink.rst | 6 +++--- Documentation/networking/gtp.rst | 2 +- Documentation/networking/ieee802154.rst | 2 +- Documentation/networking/ip-sysctl.rst | 6 +++--- Documentation/networking/ipvlan.rst | 2 +- Documentation/networking/j1939.rst | 2 +- Documentation/networking/net_failover.rst | 2 +- Documentation/networking/netconsole.rst | 2 +- Documentation/networking/page_pool.rst | 6 +++--- Documentation/networking/phonet.rst | 2 +- Documentation/networking/phy.rst | 2 +- Documentation/networking/regulatory.rst | 4 ++-- Documentation/networking/rxrpc.rst | 2 +- Documentation/networking/snmp_counter.rst | 4 ++-- Documentation/networking/sysfs-tagging.rst | 2 +- 35 files changed, 49 insertions(+), 49 deletions(-) diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst index 60b217b436be..247c6c4127e9 100644 --- a/Documentation/networking/af_xdp.rst +++ b/Documentation/networking/af_xdp.rst @@ -419,7 +419,7 @@ XDP_UMEM_REG setsockopt ----------------------- This setsockopt registers a UMEM to a socket. This is the area that -contain all the buffers that packet can recide in. The call takes a +contain all the buffers that packet can reside in. The call takes a pointer to the beginning of this area and the size of it. Moreover, it also has parameter called chunk_size that is the size that the UMEM is divided into. It can only be 2K or 4K at the moment. If you have an @@ -592,7 +592,7 @@ A: When a netdev of a physical NIC is initialized, Linux usually A number of other ways are possible all up to the capabilities of the NIC you have. -Q: Can I use the XSKMAP to implement a switch betwen different umems +Q: Can I use the XSKMAP to implement a switch between different umems in copy mode? A: The short answer is no, that is not supported at the moment. The diff --git a/Documentation/networking/arcnet-hardware.rst b/Documentation/networking/arcnet-hardware.rst index ac249ac8fcf2..982215723582 100644 --- a/Documentation/networking/arcnet-hardware.rst +++ b/Documentation/networking/arcnet-hardware.rst @@ -1902,7 +1902,7 @@ of 32 possible I/O Base addresses using the following tables:: 6 | 10 The I/O address is sum of all switches set to "1". Remember that -the I/O address space bellow 0x200 is RESERVED for mainboard, so +the I/O address space below 0x200 is RESERVED for mainboard, so switch 1 should be ALWAYS SET TO OFF. diff --git a/Documentation/networking/can.rst b/Documentation/networking/can.rst index 90121deef217..d7e1ada905b2 100644 --- a/Documentation/networking/can.rst +++ b/Documentation/networking/can.rst @@ -931,7 +931,7 @@ ival1: ival2: Throttle the received message rate down to the value of ival2. This is useful to reduce messages for the application when the signal inside the - CAN frame is stateless as state changes within the ival2 periode may get + CAN frame is stateless as state changes within the ival2 period may get lost. Broadcast Manager Multiplex Message Receive Filter diff --git a/Documentation/networking/can_ucan_protocol.rst b/Documentation/networking/can_ucan_protocol.rst index 638ac1ee7914..935d872ae87c 100644 --- a/Documentation/networking/can_ucan_protocol.rst +++ b/Documentation/networking/can_ucan_protocol.rst @@ -50,7 +50,7 @@ Setup Packet ``wIndex`` USB Interface Index (0 for device commands) ``wLength`` * Host to Device - Number of bytes to transmit * Device to Host - Maximum Number of bytes to - receive. If the device send less. Commom ZLP + receive. If the device send less. Common ZLP semantics are used. ================= ===================================================== diff --git a/Documentation/networking/cdc_mbim.rst b/Documentation/networking/cdc_mbim.rst index 0048409c06b4..37f968acc473 100644 --- a/Documentation/networking/cdc_mbim.rst +++ b/Documentation/networking/cdc_mbim.rst @@ -93,7 +93,7 @@ MBIM function can be looked up using sysfs. For example:: USB configuration descriptors ----------------------------- The wMaxControlMessage field of the CDC MBIM functional descriptor -limits the maximum control message size. The managament application is +limits the maximum control message size. The management application is responsible for negotiating a control message size complying with the requirements in section 9.3.1 of [1], taking this descriptor field into consideration. diff --git a/Documentation/networking/device_drivers/atm/iphase.rst b/Documentation/networking/device_drivers/atm/iphase.rst index 92d9b757d75a..388c7101e2cb 100644 --- a/Documentation/networking/device_drivers/atm/iphase.rst +++ b/Documentation/networking/device_drivers/atm/iphase.rst @@ -4,7 +4,7 @@ ATM (i)Chip IA Linux Driver Source ================================== - READ ME FISRT + READ ME FIRST -------------------------------------------------------------------------------- diff --git a/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst index 40c92ea272af..1a4fc6607582 100644 --- a/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst +++ b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst @@ -577,7 +577,7 @@ CTU CAN FD IP Core and Driver Development Acknowledgment * Linux driver development * continuous integration platform architect and GHDL updates - * theses `Open-source and Open-hardware CAN FD Protocol Support `_ + * thesis `Open-source and Open-hardware CAN FD Protocol Support `_ * Jiri Novak @@ -603,7 +603,7 @@ CTU CAN FD IP Core and Driver Development Acknowledgment * Jan Charvat * implemented CTU CAN FD functional model for QEMU which has been integrated into QEMU mainline (`docs/system/devices/can.rst `_) - * Bachelor theses Model of CAN FD Communication Controller for QEMU Emulator + * Bachelor thesis Model of CAN FD Communication Controller for QEMU Emulator Notes ----- diff --git a/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg b/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg index b371650788f4..381323423b4c 100644 --- a/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg +++ b/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg @@ -129,10 +129,10 @@ Setabort - Transmissionunsuccesfull + Transmissionunsuccessful Transmissionstarts - Transmissionsuccesfull + Transmissionsuccessful Transmissionsborted diff --git a/Documentation/networking/device_drivers/ethernet/3com/vortex.rst b/Documentation/networking/device_drivers/ethernet/3com/vortex.rst index e89e4192af88..a060f84c4f96 100644 --- a/Documentation/networking/device_drivers/ethernet/3com/vortex.rst +++ b/Documentation/networking/device_drivers/ethernet/3com/vortex.rst @@ -254,7 +254,7 @@ Media selection A number of the older NICs such as the 3c590 and 3c900 series have 10base2 and AUI interfaces. -Prior to January, 2001 this driver would autoeselect the 10base2 or AUI +Prior to January, 2001 this driver would autoselect the 10base2 or AUI port if it didn't detect activity on the 10baseT port. It would then get stuck on the 10base2 port and a driver reload was necessary to switch back to 10baseT. This behaviour could not be prevented with a diff --git a/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst b/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst index 595ddef1c8b3..099280a261be 100644 --- a/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst +++ b/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst @@ -270,7 +270,7 @@ RX flow rules (ntuple filters) ethtool -K ethX ntuple - When disabling ntuple filters, all the user programed filters are + When disabling ntuple filters, all the user programmed filters are flushed from the driver cache and hardware. All needed filters must be re-added when ntuple is re-enabled. @@ -418,7 +418,7 @@ Default value: 0xFFFF 0 Disable interrupt throttling. 1 Enable interrupt throttling and use specified tx and rx rates. 0xFFFF Auto throttling mode. Driver will choose the best RX and TX - interrupt throtting settings based on link speed. + interrupt throttling settings based on link speed. ====== ============================================================== aq_itr_tx - TX interrupt throttle rate @@ -456,7 +456,7 @@ AQ_CFG_RX_PAGEORDER Default value: 0 -RX page order override. Thats a power of 2 number of RX pages allocated for +RX page order override. That's a power of 2 number of RX pages allocated for each descriptor. Received descriptor size is still limited by AQ_CFG_RX_FRAME_MAX. diff --git a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst index 1d2f55feca24..e2a36d0d88ef 100644 --- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst +++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst @@ -11,7 +11,7 @@ Overview -------- The DPAA2 MAC / PHY support consists of a set of APIs that help DPAA2 network -drivers (dpaa2-eth, dpaa2-ethsw) interract with the PHY library. +drivers (dpaa2-eth, dpaa2-ethsw) interact with the PHY library. DPAA2 Software Architecture --------------------------- diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst index dd5cd69467be..5ba9015336e2 100644 --- a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst +++ b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst @@ -127,7 +127,7 @@ Type1: Type2: - RVU PF0 ie admin function creates these VFs and maps them to loopback block's channels. - A set of two VFs (VF0 & VF1, VF2 & VF3 .. so on) works as a pair ie pkts sent out of - VF0 will be received by VF1 and viceversa. + VF0 will be received by VF1 and vice versa. - These VFs can be used by applications or virtual machines to communicate between them without sending traffic outside. There is no switch present in HW, hence the support for loopback VFs. diff --git a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst index 0eabbc347d6c..6ec7d686efab 100644 --- a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst +++ b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst @@ -83,7 +83,7 @@ Configuring the Driver MTU --- -Jumbo frame support is available with a maximim size of 9194 bytes. +Jumbo frame support is available with a maximum size of 9194 bytes. Interrupt coalescing -------------------- diff --git a/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst b/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst index f24adfab6a1b..25fd9aa284e2 100644 --- a/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst +++ b/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst @@ -124,7 +124,7 @@ Multicast flooding ================== CPU port mcast_flooding is always on -Turning flooding on/off on swithch ports: +Turning flooding on/off on switch ports: bridge link set dev sw0p1 mcast_flood on/off Access and Trunk port diff --git a/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst b/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst index 1241ecac73bd..464dce938ed1 100644 --- a/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst +++ b/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst @@ -174,7 +174,7 @@ Multicast flooding ================== CPU port mcast_flooding is always on -Turning flooding on/off on swithch ports: +Turning flooding on/off on switch ports: bridge link set dev sw0p1 mcast_flood on/off Access and Trunk port diff --git a/Documentation/networking/device_drivers/wwan/iosm.rst b/Documentation/networking/device_drivers/wwan/iosm.rst index aceb0223eb46..6f9e955af984 100644 --- a/Documentation/networking/device_drivers/wwan/iosm.rst +++ b/Documentation/networking/device_drivers/wwan/iosm.rst @@ -69,7 +69,7 @@ wwan0-X network device The IOSM driver exposes IP link interface "wwan0-X" of type "wwan" for IP traffic. Iproute network utility is used for creating "wwan0-X" network interface and for associating it with MBIM IP session. The Driver supports -upto 8 IP sessions for simultaneous IP communication. +up to 8 IP sessions for simultaneous IP communication. The userspace management application is responsible for creating new IP link prior to establishing MBIM IP session where the SessionId is greater than 0. diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst index 625efb3777d5..10f282c2117c 100644 --- a/Documentation/networking/devlink/ice.rst +++ b/Documentation/networking/devlink/ice.rst @@ -285,7 +285,7 @@ features are enabled after the hierarchy is exported, but before any changes are made. This feature is also dependent on switchdev being enabled in the system. -It's required bacause devlink-rate requires devlink-port objects to be +It's required because devlink-rate requires devlink-port objects to be present, and those objects are only created in switchdev mode. If the driver is set to the switchdev mode, it will export internal @@ -320,7 +320,7 @@ nodes and nodes with children also can't be deleted. * - ``tx_weight`` - allows for usage of Weighted Fair Queuing arbitration scheme among siblings. This arbitration scheme can be used simultaneously with - the strict priority. Range 1-200. Only relative values mater for + the strict priority. Range 1-200. Only relative values matter for arbitration. ``tx_priority`` and ``tx_weight`` can be used simultaneously. In that case diff --git a/Documentation/networking/devlink/netdevsim.rst b/Documentation/networking/devlink/netdevsim.rst index ec5e6d79b2e2..88482725422c 100644 --- a/Documentation/networking/devlink/netdevsim.rst +++ b/Documentation/networking/devlink/netdevsim.rst @@ -95,5 +95,5 @@ Driver-specific Traps * - ``fid_miss`` - ``exception`` - When a packet enters the device it is classified to a filtering - indentifier (FID) based on the ingress port and VLAN. This trap is used + identifier (FID) based on the ingress port and VLAN. This trap is used to trap packets for which a FID could not be found diff --git a/Documentation/networking/devlink/prestera.rst b/Documentation/networking/devlink/prestera.rst index 49409d1d3081..96b1124e614b 100644 --- a/Documentation/networking/devlink/prestera.rst +++ b/Documentation/networking/devlink/prestera.rst @@ -138,4 +138,4 @@ Driver-specific Traps - Drops packets with zero (0) IPV4 source address. * - ``met_red`` - ``drop`` - - Drops non-conforming packets (dropped by Ingress policer, metering drop), e.g. packet rate exceeded configured bandwith. + - Drops non-conforming packets (dropped by Ingress policer, metering drop), e.g. packet rate exceeded configured bandwidth. diff --git a/Documentation/networking/dsa/configuration.rst b/Documentation/networking/dsa/configuration.rst index 827701f8cbfe..d2934c40f0f1 100644 --- a/Documentation/networking/dsa/configuration.rst +++ b/Documentation/networking/dsa/configuration.rst @@ -5,7 +5,7 @@ DSA switch configuration from userspace ======================================= The DSA switch configuration is not integrated into the main userspace -network configuration suites by now and has to be performed manualy. +network configuration suites by now and has to be performed manually. .. _dsa-config-showcases: diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index 1626e863eec9..d144e890961d 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -106,7 +106,7 @@ modifying a bitmap, the former changes the bit set in mask to values set in value and preserves the rest; the latter sets the bits set in the bitmap and clears the rest. -Compact form: nested (bitset) atrribute contents: +Compact form: nested (bitset) attribute contents: ============================ ====== ============================ ``ETHTOOL_A_BITSET_NOMASK`` flag no mask, only a list @@ -783,7 +783,7 @@ Kernel response contents: ``ETHTOOL_A_FEATURES_ACTIVE`` bitset diff old vs. new active ==================================== ====== ========================== -Request constains only one bitset which can be either value/mask pair (request +Request contains only one bitset which can be either value/mask pair (request to change specific feature bits and leave the rest) or only a value (request to set all features to specified set). @@ -1823,7 +1823,7 @@ aPLCATransmitOpportunityTimer. The valid range for this attribute is When set, the optional ``ETHTOOL_A_PLCA_BURST_CNT`` attribute indicates the configured number of extra packets that the node is allowed to send during a single transmit opportunity. By default, this attribute is 0, meaning that -the node can only send a sigle frame per TO. When greater than 0, the PLCA RS +the node can only send a single frame per TO. When greater than 0, the PLCA RS keeps the TO after any transmission, waiting for the MAC to send a new frame for up to aPLCABurstTimer BTs. This can only happen a number of times per PLCA cycle up to the value of this parameter. After that, the burst is over and the diff --git a/Documentation/networking/gtp.rst b/Documentation/networking/gtp.rst index 1563fb94b289..9a7835cc1437 100644 --- a/Documentation/networking/gtp.rst +++ b/Documentation/networking/gtp.rst @@ -162,7 +162,7 @@ Local GTP-U entity and tunnel identification GTP-U uses UDP for transporting PDU's. The receiving UDP port is 2152 for GTPv1-U and 3386 for GTPv0-U. -There is only one GTP-U entity (and therefor SGSN/GGSN/S-GW/PDN-GW +There is only one GTP-U entity (and therefore SGSN/GGSN/S-GW/PDN-GW instance) per IP address. Tunnel Endpoint Identifier (TEID) are unique per GTP-U entity. diff --git a/Documentation/networking/ieee802154.rst b/Documentation/networking/ieee802154.rst index f27856d77c8b..c652d383fe10 100644 --- a/Documentation/networking/ieee802154.rst +++ b/Documentation/networking/ieee802154.rst @@ -70,7 +70,7 @@ Like with WiFi, there are several types of devices implementing IEEE 802.15.4. exports a management (e.g. MLME) and data API. 2) 'SoftMAC' or just radio. These types of devices are just radio transceivers possibly with some kinds of acceleration like automatic CRC computation and -comparation, automagic ACK handling, address matching, etc. +comparison, automagic ACK handling, address matching, etc. Those types of devices require different approach to be hooked into Linux kernel. diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 4cc2fab58dea..39df3cfb3bcb 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -50,7 +50,7 @@ ip_no_pmtu_disc - INTEGER Default: FALSE min_pmtu - INTEGER - default 552 - minimum Path MTU. Unless this is changed mannually, + default 552 - minimum Path MTU. Unless this is changed manually, each cached pmtu will never be lower than this setting. ip_forward_use_pmtu - BOOLEAN @@ -2078,7 +2078,7 @@ skip_notify_on_dev_down - BOOLEAN nexthop_compat_mode - BOOLEAN New nexthop API provides a means for managing nexthops independent of - prefixes. Backwards compatibilty with old route format is enabled by + prefixes. Backwards compatibility with old route format is enabled by default which means route dumps and notifications contain the new nexthop attribute but also the full, expanded nexthop definition. Further, updates or deletes of a nexthop configuration generate route @@ -2811,7 +2811,7 @@ pf_expose - INTEGER can be got via SCTP_GET_PEER_ADDR_INFO sockopt; When it's enabled, a SCTP_PEER_ADDR_CHANGE event will be sent for a transport becoming SCTP_PF state and a SCTP_PF-state transport info can be got via - SCTP_GET_PEER_ADDR_INFO sockopt; When it's diabled, no + SCTP_GET_PEER_ADDR_INFO sockopt; When it's disabled, no SCTP_PEER_ADDR_CHANGE event will be sent and it returns -EACCES when trying to get a SCTP_PF-state transport info via SCTP_GET_PEER_ADDR_INFO sockopt. diff --git a/Documentation/networking/ipvlan.rst b/Documentation/networking/ipvlan.rst index 0000c1d383bc..895d0ccfd596 100644 --- a/Documentation/networking/ipvlan.rst +++ b/Documentation/networking/ipvlan.rst @@ -61,7 +61,7 @@ e.g. IPvlan has two modes of operation - L2 and L3. For a given master device, you can select one of these two modes and all slaves on that master will operate in the same (selected) mode. The RX mode is almost identical except -that in L3 mode the slaves wont receive any multicast / broadcast traffic. +that in L3 mode the slaves won't receive any multicast / broadcast traffic. L3 mode is more restrictive since routing is controlled from the other (mostly) default namespace. diff --git a/Documentation/networking/j1939.rst b/Documentation/networking/j1939.rst index b705d2801e9c..e4bd7aa1f5aa 100644 --- a/Documentation/networking/j1939.rst +++ b/Documentation/networking/j1939.rst @@ -116,7 +116,7 @@ format, the Group Extension is set in the PS-field. ---------------------------------------- 23 ... 16 15 ... 8 ============== ======================== - F0h ... FFh GE (Group Extenstion) + F0h ... FFh GE (Group Extension) ============== ======================== On the other hand, when using PDU1 format, the PS-field contains a so-called diff --git a/Documentation/networking/net_failover.rst b/Documentation/networking/net_failover.rst index 3a662f2b4d6e..f4e1b4e07adc 100644 --- a/Documentation/networking/net_failover.rst +++ b/Documentation/networking/net_failover.rst @@ -90,7 +90,7 @@ virtio-net interface, and ens11 is the slave 'primary' VF passthrough interface. One point to note here is that some user space network configuration daemons like systemd-networkd, ifupdown, etc, do not understand the 'net_failover' device; and on the first boot, the VM might end up with both 'failover' device -and VF accquiring IP addresses (either same or different) from the DHCP server. +and VF acquiring IP addresses (either same or different) from the DHCP server. This will result in lack of connectivity to the VM. So some tweaks might be needed to these network configuration daemons to make sure that an IP is received only on the 'failover' device. diff --git a/Documentation/networking/netconsole.rst b/Documentation/networking/netconsole.rst index 1f5c4a04027c..dd0518e002f6 100644 --- a/Documentation/networking/netconsole.rst +++ b/Documentation/networking/netconsole.rst @@ -167,7 +167,7 @@ following format which is the same as /dev/kmsg:: Non printable characters in are escaped using "\xff" notation. If the message contains optional dictionary, verbatim -newline is used as the delimeter. +newline is used as the delimiter. If a message doesn't fit in certain number of bytes (currently 1000), the message is split into multiple fragments by netconsole. These diff --git a/Documentation/networking/page_pool.rst b/Documentation/networking/page_pool.rst index 5db8c263b0c6..30f1344e7cca 100644 --- a/Documentation/networking/page_pool.rst +++ b/Documentation/networking/page_pool.rst @@ -11,7 +11,7 @@ Basic use involves replacing alloc_pages() calls with the page_pool_alloc_pages() call. Drivers should use page_pool_dev_alloc_pages() replacing dev_alloc_pages(). -API keeps track of inflight pages, in order to let API user know +API keeps track of in-flight pages, in order to let API user know when it is safe to free a page_pool object. Thus, API users must run page_pool_release_page() when a page is leaving the page_pool or call page_pool_put_page() where appropriate in order to maintain correct @@ -19,7 +19,7 @@ accounting. API user must call page_pool_put_page() once on a page, as it will either recycle the page, or in case of refcnt > 1, it will -release the DMA mapping and inflight state accounting. +release the DMA mapping and in-flight state accounting. Architecture overview ===================== @@ -88,7 +88,7 @@ a page will cause no race conditions is enough. directly into the pool fast cache. * page_pool_release_page(): Unmap the page (if mapped) and account for it on - inflight counters. + in-flight counters. * page_pool_dev_alloc_pages(): Get a page from the page allocator or page_pool caches. diff --git a/Documentation/networking/phonet.rst b/Documentation/networking/phonet.rst index 8668dcbc5e6a..d705cc5b09fc 100644 --- a/Documentation/networking/phonet.rst +++ b/Documentation/networking/phonet.rst @@ -131,7 +131,7 @@ Phonet resources, as follow:: Subscription is similarly cancelled using the SIOCPNDELRESOURCE I/O control request, or when the socket is closed. -Note that no more than one socket can be subcribed to any given +Note that no more than one socket can be subscribed to any given resource at a time. If not, ioctl() will return EBUSY. diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst index d11329a08984..b7ac4c64cf67 100644 --- a/Documentation/networking/phy.rst +++ b/Documentation/networking/phy.rst @@ -315,7 +315,7 @@ Some of the interface modes are described below: only the port id, but also so-called "extensions". The only documented extension so-far in the specification is the inclusion of timestamps, for PTP-enabled PHYs. This mode isn't compatible with QSGMII, but offers the - same capabilities in terms of link speed and negociation. + same capabilities in terms of link speed and negotiation. ``PHY_INTERFACE_MODE_1000BASEKX`` This is 1000BASE-X as defined by IEEE 802.3 Clause 36 with Clause 73 diff --git a/Documentation/networking/regulatory.rst b/Documentation/networking/regulatory.rst index 16782a95b74a..5e42c8a175c3 100644 --- a/Documentation/networking/regulatory.rst +++ b/Documentation/networking/regulatory.rst @@ -66,7 +66,7 @@ An example:: iw reg set CR This will request the kernel to set the regulatory domain to -the specificied alpha2. The kernel in turn will then ask userspace +the specified alpha2. The kernel in turn will then ask userspace to provide a regulatory domain for the alpha2 specified by the user by sending a uevent. @@ -158,7 +158,7 @@ kmalloc() a structure big enough to hold your regulatory domain structure and you should then fill it with your data. Finally you simply call regulatory_hint() with the regulatory domain structure in it. -Bellow is a simple example, with a regulatory domain cached using the stack. +Below is a simple example, with a regulatory domain cached using the stack. Your implementation may vary (read EEPROM cache instead, for example). Example cache of some regulatory domain:: diff --git a/Documentation/networking/rxrpc.rst b/Documentation/networking/rxrpc.rst index e1af54424192..ec1323d92c96 100644 --- a/Documentation/networking/rxrpc.rst +++ b/Documentation/networking/rxrpc.rst @@ -1069,7 +1069,7 @@ The kernel interface functions are as follows: This value can be used to determine if the remote client has been restarted as it shouldn't change otherwise. - (#) Set the maxmimum lifespan on a call:: + (#) Set the maximum lifespan on a call:: void rxrpc_kernel_set_max_life(struct socket *sock, struct rxrpc_call *call, diff --git a/Documentation/networking/snmp_counter.rst b/Documentation/networking/snmp_counter.rst index 423d138b5ff3..213637474478 100644 --- a/Documentation/networking/snmp_counter.rst +++ b/Documentation/networking/snmp_counter.rst @@ -980,7 +980,7 @@ How many reply packets of the SYN cookies the TCP stack receives. The MSS decoded from the SYN cookie is invalid. When this counter is updated, the received packet won't be treated as a SYN cookie and the -TcpExtSyncookiesRecv counter wont be updated. +TcpExtSyncookiesRecv counter won't be updated. Challenge ACK ============= @@ -1681,7 +1681,7 @@ RST to nstat-b:: nstatuser@nstat-a:~$ sudo iptables -A INPUT -p tcp --sport 9000 -j DROP -Send 3 SYN repeatly to nstat-b:: +Send 3 SYN repeatedly to nstat-b:: nstatuser@nstat-a:~$ for i in {1..3}; do sudo tcpreplay -i ens3 /tmp/syn_fixcsum.pcap; done diff --git a/Documentation/networking/sysfs-tagging.rst b/Documentation/networking/sysfs-tagging.rst index 83647e10c207..65307130ab63 100644 --- a/Documentation/networking/sysfs-tagging.rst +++ b/Documentation/networking/sysfs-tagging.rst @@ -43,6 +43,6 @@ Users of this interface: - current_ns() which returns current's namespace - netlink_ns() which returns a socket's namespace - - initial_ns() which returns the initial namesapce + - initial_ns() which returns the initial namespace - call kobj_ns_exit() when an individual tag is no longer valid