diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h index eb3ddbec1752..d8f9dec0ecc3 100644 --- a/arch/mips/include/asm/mach-loongson32/loongson1.h +++ b/arch/mips/include/asm/mach-loongson32/loongson1.h @@ -47,7 +47,6 @@ #include #include -#include #include #include diff --git a/arch/mips/include/asm/mach-loongson32/regs-pwm.h b/arch/mips/include/asm/mach-loongson32/regs-pwm.h deleted file mode 100644 index ec870c82d492..000000000000 --- a/arch/mips/include/asm/mach-loongson32/regs-pwm.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (c) 2014 Zhang, Keguang - * - * Loongson 1 PWM Register Definitions. - */ - -#ifndef __ASM_MACH_LOONGSON32_REGS_PWM_H -#define __ASM_MACH_LOONGSON32_REGS_PWM_H - -/* Loongson 1 PWM Timer Register Definitions */ -#define PWM_CNT 0x0 -#define PWM_HRC 0x4 -#define PWM_LRC 0x8 -#define PWM_CTRL 0xc - -/* PWM Control Register Bits */ -#define CNT_RST BIT(7) -#define INT_SR BIT(6) -#define INT_EN BIT(5) -#define PWM_SINGLE BIT(4) -#define PWM_OE BIT(3) -#define CNT_EN BIT(0) - -#endif /* __ASM_MACH_LOONGSON32_REGS_PWM_H */ diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig index 2ef9da0016df..a7c500959577 100644 --- a/arch/mips/loongson32/Kconfig +++ b/arch/mips/loongson32/Kconfig @@ -35,41 +35,4 @@ config LOONGSON1_LS1C select COMMON_CLK endchoice -menuconfig CEVT_CSRC_LS1X - bool "Use PWM Timer for clockevent/clocksource" - select MIPS_EXTERNAL_TIMER - depends on CPU_LOONGSON32 - help - This option changes the default clockevent/clocksource to PWM Timer, - and is required by Loongson1 CPUFreq support. - - If unsure, say N. - -choice - prompt "Select clockevent/clocksource" - depends on CEVT_CSRC_LS1X - default TIMER_USE_PWM0 - -config TIMER_USE_PWM0 - bool "Use PWM Timer 0" - help - Use PWM Timer 0 as the default clockevent/clocksourcer. - -config TIMER_USE_PWM1 - bool "Use PWM Timer 1" - help - Use PWM Timer 1 as the default clockevent/clocksourcer. - -config TIMER_USE_PWM2 - bool "Use PWM Timer 2" - help - Use PWM Timer 2 as the default clockevent/clocksourcer. - -config TIMER_USE_PWM3 - bool "Use PWM Timer 3" - help - Use PWM Timer 3 as the default clockevent/clocksourcer. - -endchoice - endif # MACH_LOONGSON32 diff --git a/arch/mips/loongson32/common/time.c b/arch/mips/loongson32/common/time.c index 965c04aa56fd..74ad2b17918d 100644 --- a/arch/mips/loongson32/common/time.c +++ b/arch/mips/loongson32/common/time.c @@ -5,208 +5,8 @@ #include #include -#include -#include #include -#include -#include - -#ifdef CONFIG_CEVT_CSRC_LS1X - -#if defined(CONFIG_TIMER_USE_PWM1) -#define LS1X_TIMER_BASE LS1X_PWM1_BASE -#define LS1X_TIMER_IRQ LS1X_PWM1_IRQ - -#elif defined(CONFIG_TIMER_USE_PWM2) -#define LS1X_TIMER_BASE LS1X_PWM2_BASE -#define LS1X_TIMER_IRQ LS1X_PWM2_IRQ - -#elif defined(CONFIG_TIMER_USE_PWM3) -#define LS1X_TIMER_BASE LS1X_PWM3_BASE -#define LS1X_TIMER_IRQ LS1X_PWM3_IRQ - -#else -#define LS1X_TIMER_BASE LS1X_PWM0_BASE -#define LS1X_TIMER_IRQ LS1X_PWM0_IRQ -#endif - -DEFINE_RAW_SPINLOCK(ls1x_timer_lock); - -static void __iomem *timer_reg_base; -static uint32_t ls1x_jiffies_per_tick; - -static inline void ls1x_pwmtimer_set_period(uint32_t period) -{ - __raw_writel(period, timer_reg_base + PWM_HRC); - __raw_writel(period, timer_reg_base + PWM_LRC); -} - -static inline void ls1x_pwmtimer_restart(void) -{ - __raw_writel(0x0, timer_reg_base + PWM_CNT); - __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL); -} - -void __init ls1x_pwmtimer_init(void) -{ - timer_reg_base = ioremap(LS1X_TIMER_BASE, SZ_16); - if (!timer_reg_base) - panic("Failed to remap timer registers"); - - ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ); - - ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick); - ls1x_pwmtimer_restart(); -} - -static u64 ls1x_clocksource_read(struct clocksource *cs) -{ - unsigned long flags; - int count; - u32 jifs; - static int old_count; - static u32 old_jifs; - - raw_spin_lock_irqsave(&ls1x_timer_lock, flags); - /* - * Although our caller may have the read side of xtime_lock, - * this is now a seqlock, and we are cheating in this routine - * by having side effects on state that we cannot undo if - * there is a collision on the seqlock and our caller has to - * retry. (Namely, old_jifs and old_count.) So we must treat - * jiffies as volatile despite the lock. We read jiffies - * before latching the timer count to guarantee that although - * the jiffies value might be older than the count (that is, - * the counter may underflow between the last point where - * jiffies was incremented and the point where we latch the - * count), it cannot be newer. - */ - jifs = jiffies; - /* read the count */ - count = __raw_readl(timer_reg_base + PWM_CNT); - - /* - * It's possible for count to appear to go the wrong way for this - * reason: - * - * The timer counter underflows, but we haven't handled the resulting - * interrupt and incremented jiffies yet. - * - * Previous attempts to handle these cases intelligently were buggy, so - * we just do the simple thing now. - */ - if (count < old_count && jifs == old_jifs) - count = old_count; - - old_count = count; - old_jifs = jifs; - - raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags); - - return (u64) (jifs * ls1x_jiffies_per_tick) + count; -} - -static struct clocksource ls1x_clocksource = { - .name = "ls1x-pwmtimer", - .read = ls1x_clocksource_read, - .mask = CLOCKSOURCE_MASK(24), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static irqreturn_t ls1x_clockevent_isr(int irq, void *devid) -{ - struct clock_event_device *cd = devid; - - ls1x_pwmtimer_restart(); - cd->event_handler(cd); - - return IRQ_HANDLED; -} - -static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd) -{ - raw_spin_lock(&ls1x_timer_lock); - ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick); - ls1x_pwmtimer_restart(); - __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL); - raw_spin_unlock(&ls1x_timer_lock); - - return 0; -} - -static int ls1x_clockevent_tick_resume(struct clock_event_device *cd) -{ - raw_spin_lock(&ls1x_timer_lock); - __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL); - raw_spin_unlock(&ls1x_timer_lock); - - return 0; -} - -static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd) -{ - raw_spin_lock(&ls1x_timer_lock); - __raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN, - timer_reg_base + PWM_CTRL); - raw_spin_unlock(&ls1x_timer_lock); - - return 0; -} - -static int ls1x_clockevent_set_next(unsigned long evt, - struct clock_event_device *cd) -{ - raw_spin_lock(&ls1x_timer_lock); - ls1x_pwmtimer_set_period(evt); - ls1x_pwmtimer_restart(); - raw_spin_unlock(&ls1x_timer_lock); - - return 0; -} - -static struct clock_event_device ls1x_clockevent = { - .name = "ls1x-pwmtimer", - .features = CLOCK_EVT_FEAT_PERIODIC, - .rating = 300, - .irq = LS1X_TIMER_IRQ, - .set_next_event = ls1x_clockevent_set_next, - .set_state_shutdown = ls1x_clockevent_set_state_shutdown, - .set_state_periodic = ls1x_clockevent_set_state_periodic, - .set_state_oneshot = ls1x_clockevent_set_state_shutdown, - .tick_resume = ls1x_clockevent_tick_resume, -}; - -static void __init ls1x_time_init(void) -{ - struct clock_event_device *cd = &ls1x_clockevent; - int ret; - - if (!mips_hpt_frequency) - panic("Invalid timer clock rate"); - - ls1x_pwmtimer_init(); - - clockevent_set_clock(cd, mips_hpt_frequency); - cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd); - cd->max_delta_ticks = 0xffffff; - cd->min_delta_ns = clockevent_delta2ns(0x000300, cd); - cd->min_delta_ticks = 0x000300; - cd->cpumask = cpumask_of(smp_processor_id()); - clockevents_register_device(cd); - - ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000; - ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency); - if (ret) - panic(KERN_ERR "Failed to register clocksource: %d\n", ret); - - if (request_irq(LS1X_TIMER_IRQ, ls1x_clockevent_isr, - IRQF_PERCPU | IRQF_TIMER, "ls1x-pwmtimer", - &ls1x_clockevent)) - pr_err("Failed to register ls1x-pwmtimer interrupt\n"); -} -#endif /* CONFIG_CEVT_CSRC_LS1X */ - void __init plat_time_init(void) { struct clk *clk = NULL; @@ -214,20 +14,10 @@ void __init plat_time_init(void) /* initialize LS1X clocks */ of_clk_init(NULL); -#ifdef CONFIG_CEVT_CSRC_LS1X - /* setup LS1X PWM timer */ - clk = clk_get(NULL, "ls1x-pwmtimer"); - if (IS_ERR(clk)) - panic("unable to get timer clock, err=%ld", PTR_ERR(clk)); - - mips_hpt_frequency = clk_get_rate(clk); - ls1x_time_init(); -#else /* setup mips r4k timer */ clk = clk_get(NULL, "cpu_clk"); if (IS_ERR(clk)) panic("unable to get cpu clock, err=%ld", PTR_ERR(clk)); mips_hpt_frequency = clk_get_rate(clk) / 2; -#endif /* CONFIG_CEVT_CSRC_LS1X */ }