kevin/linux
1
Fork 0
Code

ARM: dts: stm32: Describe PHY LEDs in DH STM32MP13xx DHCOR DHSBC board DT

Browse Source 
The RTL8211 PHY on DH STM32MP13xx DHCOR DHSBC carrier board supports HW
LED offload, the LEDs can be configured on link at 10/100/1000 line rate
and on RXTX activity. There are two PHYs on this board, each only has two
out of three LEDs connected to the PHY LED outputs. Describe this hardware
configuration in DT.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This commit is contained in:
Marek Vasut 2024-07-05 23:53:50 +02:00 committed by Alexandre Torgue
parent 4a12b200a6
commit 9d4de04f61
1 changed files with 38 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
View File

@ -100,6 +100,25 @@
reset-assert-us = <15000>;
reset-deassert-us = <55000>;
reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
linux,default-trigger = "netdev";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_YELLOW>;
function = LED_FUNCTION_WAN;
linux,default-trigger = "netdev";
};
};
};
};
};
@ -130,6 +149,25 @@
reset-assert-us = <15000>;
reset-deassert-us = <55000>;
reset-gpios = <&gpiog 8 GPIO_ACTIVE_LOW>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
linux,default-trigger = "netdev";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_YELLOW>;
function = LED_FUNCTION_LAN;
linux,default-trigger = "netdev";
};
};
};
};
};