diff --git a/Documentation/hwmon/nzxt-kraken3.rst b/Documentation/hwmon/nzxt-kraken3.rst index 90fd9dec15ff..57fe99d23301 100644 --- a/Documentation/hwmon/nzxt-kraken3.rst +++ b/Documentation/hwmon/nzxt-kraken3.rst @@ -11,17 +11,20 @@ Supported devices: * NZXT Kraken Z53 * NZXT Kraken Z63 * NZXT Kraken Z73 +* NZXT Kraken 2023 +* NZXT Kraken 2023 Elite Author: Jonas Malaco, Aleksa Savic Description ----------- -This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and -Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature -and pump speed (in RPM), as well as PWM control (either as a fixed value -or through a temp-PWM curve). The Z-series models additionally expose the speed -and duty of an optionally connected fan, with the same PWM control capabilities. +This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73, +Z53/Z63/Z73 and Kraken 2023 (standard and Elite) all-in-one CPU liquid coolers. +All models expose liquid temperature and pump speed (in RPM), as well as PWM +control (either as a fixed value or through a temp-PWM curve). The Z-series and +Kraken 2023 models additionally expose the speed and duty of an optionally connected +fan, with the same PWM control capabilities. Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is for the manual control mode and 2 is for the liquid temp to PWM curve mode. @@ -39,9 +42,9 @@ The devices can report if they are faulty. The driver supports that situation and will issue a warning. This can also happen when the USB cable is connected, but SATA power is not. -The addressable RGB LEDs and LCD screen (only on Z-series models) are not -supported in this driver, but can be controlled through existing userspace tools, -such as `liquidctl`_. +The addressable RGB LEDs and LCD screen (only on Z-series and Kraken 2023 models) +are not supported in this driver, but can be controlled through existing userspace +tools, such as `liquidctl`_. .. _liquidctl: https://github.com/liquidctl/liquidctl diff --git a/drivers/hwmon/nzxt-kraken3.c b/drivers/hwmon/nzxt-kraken3.c index 571087e3fd3e..0b3f04c740b0 100644 --- a/drivers/hwmon/nzxt-kraken3.c +++ b/drivers/hwmon/nzxt-kraken3.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * hwmon driver for NZXT Kraken X53/X63/X73 and Z53/Z63/Z73 all in one coolers. - * X53 and Z53 in code refer to all models in their respective series (shortened - * for brevity). + * hwmon driver for NZXT Kraken X53/X63/X73, Z53/Z63/Z73 and 2023/2023 Elite all in one coolers. + * X53 and Z53 in code refer to all models in their respective series (shortened for brevity). + * 2023 models use the Z53 code paths. * * Copyright 2021 Jonas Malaco * Copyright 2022 Aleksa Savic @@ -23,8 +23,10 @@ #define USB_PRODUCT_ID_X53 0x2007 #define USB_PRODUCT_ID_X53_SECOND 0x2014 #define USB_PRODUCT_ID_Z53 0x3008 +#define USB_PRODUCT_ID_KRAKEN2023 0x300E +#define USB_PRODUCT_ID_KRAKEN2023_ELITE 0x300C -enum kinds { X53, Z53 } __packed; +enum kinds { X53, Z53, KRAKEN2023 } __packed; enum pwm_enable { off, manual, curve } __packed; #define DRIVER_NAME "nzxt_kraken3" @@ -136,6 +138,7 @@ static umode_t kraken3_is_visible(const void *data, enum hwmon_sensor_types type return 0444; break; case Z53: + case KRAKEN2023: /* Pump and fan */ if (channel < 2) return 0444; @@ -155,6 +158,7 @@ static umode_t kraken3_is_visible(const void *data, enum hwmon_sensor_types type return 0644; break; case Z53: + case KRAKEN2023: /* Pump and fan */ if (channel < 2) return 0644; @@ -242,6 +246,7 @@ static int kraken3_read_x53(struct kraken3_data *priv) return 0; } +/* Covers Z53 and KRAKEN2023 device kinds */ static int kraken3_read_z53(struct kraken3_data *priv) { int ret = mutex_lock_interruptible(&priv->z53_status_request_lock); @@ -355,6 +360,13 @@ static int kraken3_write_curve(struct kraken3_data *priv, u8 *curve_array, int c /* Set the correct ID for writing pump/fan duty (0x01 or 0x02, respectively) */ fixed_duty_cmd[SET_DUTY_ID_OFFSET] = channel + 1; + if (priv->kind == KRAKEN2023) { + /* These require 1s in the next one or two slots after SET_DUTY_ID_OFFSET */ + fixed_duty_cmd[SET_DUTY_ID_OFFSET + 1] = 1; + if (channel == 1) /* Fan */ + fixed_duty_cmd[SET_DUTY_ID_OFFSET + 2] = 1; + } + /* Copy curve to command */ memcpy(fixed_duty_cmd + SET_CURVE_DUTY_CMD_HEADER_LENGTH, curve_array, CUSTOM_CURVE_POINTS); @@ -502,8 +514,8 @@ static umode_t kraken3_curve_props_are_visible(struct kobject *kobj, struct attr struct device *dev = kobj_to_dev(kobj); struct kraken3_data *priv = dev_get_drvdata(dev); - /* Only Z53 has the fan curve */ - if (index >= CUSTOM_CURVE_POINTS && priv->kind != Z53) + /* X53 does not have a fan */ + if (index >= CUSTOM_CURVE_POINTS && priv->kind == X53) return 0; return attr->mode; @@ -769,8 +781,8 @@ static int kraken3_raw_event(struct hid_device *hdev, struct hid_report *report, if (priv->kind == X53 && !completion_done(&priv->status_report_processed)) { /* Mark first X-series device report as received */ complete_all(&priv->status_report_processed); - } else if (priv->kind == Z53) { - /* Additional readings for Z53 */ + } else if (priv->kind == Z53 || priv->kind == KRAKEN2023) { + /* Additional readings for Z53 and KRAKEN2023 */ priv->fan_input[1] = get_unaligned_le16(data + Z53_FAN_SPEED_OFFSET); priv->channel_info[1].reported_duty = kraken3_percent_to_pwm(data[Z53_FAN_DUTY_OFFSET]); @@ -907,6 +919,14 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id priv->kind = Z53; device_name = "z53"; break; + case USB_PRODUCT_ID_KRAKEN2023: + priv->kind = KRAKEN2023; + device_name = "kraken2023"; + break; + case USB_PRODUCT_ID_KRAKEN2023_ELITE: + priv->kind = KRAKEN2023; + device_name = "kraken2023elite"; + break; default: break; } @@ -969,6 +989,8 @@ static const struct hid_device_id kraken3_table[] = { { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_X53) }, { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_X53_SECOND) }, { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_Z53) }, + { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_KRAKEN2023) }, + { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_KRAKEN2023_ELITE) }, { } };