From 850101b3598277794f92a9e363a60a66e0d42890 Mon Sep 17 00:00:00 2001 From: Philipp Rossak Date: Tue, 5 Sep 2023 00:02:04 +0200 Subject: [PATCH] iio: adc: imx8qxp: Fix address for command buffer registers The ADC Command Buffer Register high and low are currently pointing to the wrong address and makes it impossible to perform correct ADC measurements over all channels. According to the datasheet of the imx8qxp the ADC_CMDL register starts at address 0x100 and the ADC_CMDH register starts at address 0x104. This bug seems to be in the kernel since the introduction of this driver. This can be observed by checking all raw voltages of the adc and they are all nearly identical: cat /sys/bus/iio/devices/iio\:device0/in_voltage*_raw 3498 3494 3491 3491 3489 3490 3490 3490 Fixes: 1e23dcaa1a9fa ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Signed-off-by: Philipp Rossak Acked-by: Haibo Chen Link: https://lore.kernel.org/r/20230904220204.23841-1-embed3d@gmail.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/imx8qxp-adc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c index f5a0fc9e64c5..fff6e5a2d956 100644 --- a/drivers/iio/adc/imx8qxp-adc.c +++ b/drivers/iio/adc/imx8qxp-adc.c @@ -38,8 +38,8 @@ #define IMX8QXP_ADR_ADC_FCTRL 0x30 #define IMX8QXP_ADR_ADC_SWTRIG 0x34 #define IMX8QXP_ADR_ADC_TCTRL(tid) (0xc0 + (tid) * 4) -#define IMX8QXP_ADR_ADC_CMDH(cid) (0x100 + (cid) * 8) -#define IMX8QXP_ADR_ADC_CMDL(cid) (0x104 + (cid) * 8) +#define IMX8QXP_ADR_ADC_CMDL(cid) (0x100 + (cid) * 8) +#define IMX8QXP_ADR_ADC_CMDH(cid) (0x104 + (cid) * 8) #define IMX8QXP_ADR_ADC_RESFIFO 0x300 #define IMX8QXP_ADR_ADC_TST 0xffc