kevin/linux
1
Fork 0
Code

memory: renesas-rpc-if: Use Hi-Z state as the default setting for IOVF pins

Browse Source 
The RZ/{G2L,G2LC,V2L} SMARC EVK uses Micron MT25QU412A flash and RZ/G2UL
SMARC EVK uses Renesas AT25QL128A flash. With current pin setting for
IOVF pin, 4-bit flash write fails for AT25QL128A flash. Use Hi-Z state
as the default for IOVF pin, so that spi controller driver in linux will
be independent of flash type.

To support this, during board production, the bit 4 of the NV config
register must be cleared by the bootloader for Micron flash.

Output from u-boot after clearing bit4 of NVCR register.
=> renesas_micron_flash_nvcr
SF: Detected mt25qu512a with page size 256 Bytes, erase size 64 KiB, total 64 MiB
NVCR=0xef

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240830203014.199326-2-biju.das.jz@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This commit is contained in:
Biju Das 2024-08-30 21:30:03 +01:00 committed by Krzysztof Kozlowski
parent ff390189b7
commit 84d1078af5
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/memory/renesas-rpc-if.c
View File

@ -367,7 +367,7 @@ int rpcif_hw_init(struct device *dev, bool hyperflash)
regmap_update_bits(rpc->regmap, RPCIF_CMNCR,
RPCIF_CMNCR_MOIIO(3) | RPCIF_CMNCR_IOFV(3) |
RPCIF_CMNCR_BSZ(3),
RPCIF_CMNCR_MOIIO(1) | RPCIF_CMNCR_IOFV(2) |
RPCIF_CMNCR_MOIIO(1) | RPCIF_CMNCR_IOFV(3) |
RPCIF_CMNCR_BSZ(hyperflash ? 1 : 0));
else
regmap_update_bits(rpc->regmap, RPCIF_CMNCR,