staging: spmi: add Hikey 970 SPMI controller driver
Add the SPMI controller code required to use the Kirin 970 SPMI bus. [mchehab+huawei@kernel.org: added just the SPMI controller on this patch] The complete patch is at: https://github.com/96boards-hikey/linux/commit/08464419fba2 Signed-off-by: Mayulong <mayulong1@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/b4810f476e41e7de4efdf28b42472ae4ffe7defe.1597647359.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
217b97f69e
commit
70f59c90c8
390
drivers/staging/hikey9xx/hisi-spmi-controller.c
Normal file
390
drivers/staging/hikey9xx/hisi-spmi-controller.c
Normal file
@ -0,0 +1,390 @@
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/seq_file.h>
|
||||
#include <linux/spmi.h>
|
||||
#include <linux/spmi.h>
|
||||
|
||||
#define SPMI_CONTROLLER_NAME "spmi_controller"
|
||||
|
||||
/*
|
||||
* SPMI register addr
|
||||
*/
|
||||
#define SPMI_CHANNEL_OFFSET 0x0300
|
||||
#define SPMI_SLAVE_OFFSET 0x20
|
||||
|
||||
#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
|
||||
/*lint -e750 -esym(750,*)*/
|
||||
#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104
|
||||
#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108
|
||||
#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c
|
||||
#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110
|
||||
|
||||
#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200
|
||||
|
||||
#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204
|
||||
#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208
|
||||
#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c
|
||||
#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210
|
||||
/*lint +e750 -esym(750,*)*/
|
||||
|
||||
#define SPMI_PER_DATAREG_BYTE 4
|
||||
/*
|
||||
* SPMI cmd register
|
||||
*/
|
||||
#define SPMI_APB_SPMI_CMD_EN (1 << 31)
|
||||
#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24
|
||||
#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20
|
||||
#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
|
||||
#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0
|
||||
|
||||
#define Tranverse32(X) ((((u32)(X) & 0xff000000) >> 24) | \
|
||||
(((u32)(X) & 0x00ff0000) >> 8) | \
|
||||
(((u32)(X) & 0x0000ff00) << 8) | \
|
||||
(((u32)(X) & 0x000000ff) << 24))
|
||||
|
||||
/* Command Opcodes */
|
||||
/*lint -e749 -esym(749,*)*/
|
||||
enum spmi_controller_cmd_op_code {
|
||||
SPMI_CMD_REG_ZERO_WRITE = 0,
|
||||
SPMI_CMD_REG_WRITE = 1,
|
||||
SPMI_CMD_REG_READ = 2,
|
||||
SPMI_CMD_EXT_REG_WRITE = 3,
|
||||
SPMI_CMD_EXT_REG_READ = 4,
|
||||
SPMI_CMD_EXT_REG_WRITE_L = 5,
|
||||
SPMI_CMD_EXT_REG_READ_L = 6,
|
||||
SPMI_CMD_REG_RESET = 7,
|
||||
SPMI_CMD_REG_SLEEP = 8,
|
||||
SPMI_CMD_REG_SHUTDOWN = 9,
|
||||
SPMI_CMD_REG_WAKEUP = 10,
|
||||
};
|
||||
/*lint +e749 -esym(749,*)*/
|
||||
|
||||
/*
|
||||
* SPMI status register
|
||||
*/
|
||||
#define SPMI_APB_TRANS_DONE (1 << 0)
|
||||
#define SPMI_APB_TRANS_FAIL (1 << 2)
|
||||
|
||||
/* Command register fields */
|
||||
#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16
|
||||
|
||||
/* Maximum number of support PMIC peripherals */
|
||||
#define SPMI_CONTROLLER_TIMEOUT_US 1000
|
||||
#define SPMI_CONTROLLER_MAX_TRANS_BYTES (16)
|
||||
|
||||
#define SPMI_WRITEL( dev, reg, addr ) \
|
||||
do { \
|
||||
writel( ( reg ), ( addr ) ); \
|
||||
} while (0)
|
||||
|
||||
#define SPMI_READL( dev, reg, addr ) \
|
||||
do { \
|
||||
reg = readl( addr ); \
|
||||
} while (0)
|
||||
|
||||
/*
|
||||
* @base base address of the PMIC Arbiter core registers.
|
||||
* @rdbase, @wrbase base address of the PMIC Arbiter read core registers.
|
||||
* For HW-v1 these are equal to base.
|
||||
* For HW-v2, the value is the same in eeraly probing, in order to read
|
||||
* PMIC_ARB_CORE registers, then chnls, and obsrvr are set to
|
||||
* PMIC_ARB_CORE_REGISTERS and PMIC_ARB_CORE_REGISTERS_OBS respectivly.
|
||||
* @intr base address of the SPMI interrupt control registers
|
||||
* @ppid_2_chnl_tbl lookup table f(SID, Periph-ID) -> channel num
|
||||
* entry is only valid if corresponding bit is set in valid_ppid_bitmap.
|
||||
* @valid_ppid_bitmap bit is set only for valid ppids.
|
||||
* @fmt_cmd formats a command to be set into PMIC_ARBq_CHNLn_CMD
|
||||
* @chnl_ofst calculates offset of the base of a channel reg space
|
||||
* @ee execution environment id
|
||||
* @irq_acc0_init_val initial value of the interrupt accumulator at probe time.
|
||||
* Use for an HW workaround. On handling interrupts, the first accumulator
|
||||
* register will be compared against this value, and bits which are set at
|
||||
* boot will be ignored.
|
||||
* @reserved_chnl entry of ppid_2_chnl_tbl that this driver should never touch.
|
||||
* value is positive channel number or negative to mark it unused.
|
||||
*/
|
||||
struct spmi_controller_dev {
|
||||
struct spmi_controller *controller;
|
||||
struct device *dev;
|
||||
void __iomem *base;
|
||||
spinlock_t lock;
|
||||
u32 channel;
|
||||
};
|
||||
|
||||
static int spmi_controller_wait_for_done(struct spmi_controller_dev *ctrl_dev,
|
||||
void __iomem *base, u8 sid, u16 addr)
|
||||
{
|
||||
u32 status = 0;
|
||||
u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
|
||||
u32 offset = SPMI_APB_SPMI_STATUS_BASE_ADDR + SPMI_CHANNEL_OFFSET * ctrl_dev->channel
|
||||
+ SPMI_SLAVE_OFFSET * sid;
|
||||
|
||||
while (timeout--) {
|
||||
SPMI_READL(ctrl_dev->dev, status, base + offset);/*lint !e732 */
|
||||
|
||||
if (status & SPMI_APB_TRANS_DONE) {
|
||||
if (status & SPMI_APB_TRANS_FAIL) {
|
||||
dev_err(ctrl_dev->dev,
|
||||
"%s: transaction failed (0x%x)\n",
|
||||
__func__, status);
|
||||
return -EIO;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
udelay(1);/*lint !e778 !e774 !e747*/
|
||||
}
|
||||
|
||||
dev_err(ctrl_dev->dev,
|
||||
"%s: timeout, status 0x%x\n",
|
||||
__func__, status);
|
||||
return -ETIMEDOUT;/*lint !e438*/
|
||||
}/*lint !e715 !e529*/
|
||||
|
||||
static int spmi_read_cmd(struct spmi_controller *ctrl,
|
||||
u8 opc, u8 sid, u16 addr, u8 *buf, size_t bc)
|
||||
{
|
||||
struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
|
||||
unsigned long flags;
|
||||
u32 cmd, data;
|
||||
int rc;
|
||||
u32 chnl_ofst = SPMI_CHANNEL_OFFSET*spmi_controller->channel;
|
||||
u8 op_code, i;
|
||||
|
||||
if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
|
||||
dev_err(spmi_controller->dev
|
||||
, "spmi_controller supports 1..%d bytes per trans, but:%ld requested"
|
||||
, SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Check the opcode */
|
||||
if (SPMI_CMD_READ == opc)
|
||||
op_code = SPMI_CMD_REG_READ;
|
||||
else if (SPMI_CMD_EXT_READ == opc)
|
||||
op_code = SPMI_CMD_EXT_REG_READ;
|
||||
else if (SPMI_CMD_EXT_READL == opc)
|
||||
op_code = SPMI_CMD_EXT_REG_READ_L;
|
||||
else {
|
||||
dev_err(spmi_controller->dev, "invalid read cmd 0x%x", opc);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
cmd = SPMI_APB_SPMI_CMD_EN |/*lint !e648 !e701 */ /* cmd_en */
|
||||
(op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |/*lint !e648 !e701 */ /* cmd_type */
|
||||
((bc-1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |/*lint !e648 !e701 */ /* byte_cnt */
|
||||
((sid & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
|
||||
((addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
|
||||
|
||||
spin_lock_irqsave(&spmi_controller->lock, flags);/*lint !e550 */
|
||||
|
||||
SPMI_WRITEL(spmi_controller->dev, cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
|
||||
|
||||
|
||||
rc = spmi_controller_wait_for_done(spmi_controller, spmi_controller->base, sid, addr);
|
||||
if (rc)
|
||||
goto done;
|
||||
|
||||
i = 0;
|
||||
do {
|
||||
SPMI_READL(spmi_controller->dev, data, spmi_controller->base + chnl_ofst + SPMI_SLAVE_OFFSET*sid + SPMI_APB_SPMI_RDATA0_BASE_ADDR + i*SPMI_PER_DATAREG_BYTE);/*lint !e732 */
|
||||
data = Tranverse32(data);
|
||||
if ((bc - i*SPMI_PER_DATAREG_BYTE ) >> 2) {/*lint !e702 */
|
||||
memcpy(buf, &data, sizeof(data));
|
||||
buf += sizeof(data);
|
||||
} else {
|
||||
memcpy(buf, &data, bc%SPMI_PER_DATAREG_BYTE);/*lint !e747 */
|
||||
buf += (bc%SPMI_PER_DATAREG_BYTE);
|
||||
}
|
||||
i++;
|
||||
} while (bc > i*SPMI_PER_DATAREG_BYTE);
|
||||
|
||||
done:
|
||||
spin_unlock_irqrestore(&spmi_controller->lock, flags);
|
||||
if (rc)
|
||||
dev_err(spmi_controller->dev, "spmi read wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
|
||||
opc, sid, addr, bc + 1);
|
||||
return rc;
|
||||
}/*lint !e550 !e529*/
|
||||
|
||||
/*lint -e438 -esym(438,*)*/
|
||||
static int spmi_write_cmd(struct spmi_controller *ctrl,
|
||||
u8 opc, u8 sid, u16 addr, const u8 *buf, size_t bc)
|
||||
{
|
||||
struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
|
||||
unsigned long flags;
|
||||
u32 cmd;
|
||||
u32 data = 0;
|
||||
int rc;
|
||||
u32 chnl_ofst = SPMI_CHANNEL_OFFSET*spmi_controller->channel;
|
||||
u8 op_code, i;
|
||||
|
||||
|
||||
if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
|
||||
dev_err(spmi_controller->dev
|
||||
, "spmi_controller supports 1..%d bytes per trans, but:%ld requested"
|
||||
, SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Check the opcode */
|
||||
if (SPMI_CMD_WRITE == opc)
|
||||
op_code = SPMI_CMD_REG_WRITE;
|
||||
else if (SPMI_CMD_EXT_WRITE == opc)
|
||||
op_code = SPMI_CMD_EXT_REG_WRITE;
|
||||
else if (SPMI_CMD_EXT_WRITEL == opc)
|
||||
op_code = SPMI_CMD_EXT_REG_WRITE_L;
|
||||
else {
|
||||
dev_err(spmi_controller->dev, "invalid write cmd 0x%x", opc);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
cmd = SPMI_APB_SPMI_CMD_EN |/*lint !e648 !e701 */ /* cmd_en */
|
||||
(op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |/*lint !e648 !e701 */ /* cmd_type */
|
||||
((bc-1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |/*lint !e648 !e701 */ /* byte_cnt */
|
||||
((sid & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
|
||||
((addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
|
||||
|
||||
/* Write data to FIFOs */
|
||||
spin_lock_irqsave(&spmi_controller->lock, flags);/*lint !e550 */
|
||||
|
||||
i = 0;
|
||||
do {
|
||||
memset(&data, 0, sizeof(data));
|
||||
if ((bc - i*SPMI_PER_DATAREG_BYTE ) >> 2) {/*lint !e702 */
|
||||
memcpy(&data, buf, sizeof(data));
|
||||
buf +=sizeof(data);
|
||||
} else {
|
||||
memcpy(&data, buf, bc%SPMI_PER_DATAREG_BYTE);/*lint !e747 */
|
||||
buf +=(bc%SPMI_PER_DATAREG_BYTE);
|
||||
}
|
||||
|
||||
data = Tranverse32(data);
|
||||
SPMI_WRITEL(spmi_controller->dev, data, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_WDATA0_BASE_ADDR+SPMI_PER_DATAREG_BYTE*i);
|
||||
i++;
|
||||
} while (bc > i*SPMI_PER_DATAREG_BYTE);
|
||||
|
||||
/* Start the transaction */
|
||||
SPMI_WRITEL(spmi_controller->dev, cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
|
||||
|
||||
rc = spmi_controller_wait_for_done(spmi_controller, spmi_controller->base, sid, addr);
|
||||
spin_unlock_irqrestore(&spmi_controller->lock, flags);
|
||||
|
||||
if (rc)
|
||||
dev_err(spmi_controller->dev, "spmi write wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
|
||||
opc, sid, addr, bc);
|
||||
|
||||
return rc;
|
||||
}/*lint !e438 !e550 !e529*/
|
||||
/*lint +e438 -esym(438,*)*/
|
||||
static int spmi_controller_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct spmi_controller_dev *spmi_controller;
|
||||
struct spmi_controller *ctrl;
|
||||
struct resource *iores;
|
||||
int ret = 0;
|
||||
|
||||
printk(KERN_INFO "HISI SPMI probe\n");
|
||||
ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
|
||||
if (!ctrl) {
|
||||
dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
|
||||
return -ENOMEM; /*lint !e429*/
|
||||
}
|
||||
spmi_controller = spmi_controller_get_drvdata(ctrl);
|
||||
spmi_controller->controller = ctrl;
|
||||
|
||||
/* NOTE: driver uses the static register mapping */
|
||||
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!iores) {
|
||||
dev_err(&pdev->dev, "can not get resource! \n");
|
||||
return -EINVAL; /*lint !e429*/
|
||||
}
|
||||
|
||||
spmi_controller->base = ioremap(iores->start, resource_size(iores));
|
||||
if (!spmi_controller->base) {
|
||||
dev_err(&pdev->dev, "can not remap base addr! \n");
|
||||
return -EADDRNOTAVAIL; /*lint !e429*/
|
||||
}
|
||||
dev_dbg(&pdev->dev, "spmi_add_controller base addr=0x%lx!\n", (long unsigned int)spmi_controller->base);/*lint !e774*/
|
||||
|
||||
/* Get properties from the device tree */
|
||||
ret = of_property_read_u32(pdev->dev.of_node, "spmi-channel",
|
||||
&spmi_controller->channel);/*lint !e838*/
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "can not get chanel \n");
|
||||
return -ENODEV; /*lint !e429*/
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, spmi_controller);
|
||||
dev_set_drvdata(&ctrl->dev, spmi_controller);
|
||||
|
||||
spin_lock_init(&spmi_controller->lock);
|
||||
|
||||
ctrl->nr = spmi_controller->channel;
|
||||
ctrl->dev.parent = pdev->dev.parent;
|
||||
ctrl->dev.of_node = of_node_get(pdev->dev.of_node);
|
||||
|
||||
/* Callbacks */
|
||||
ctrl->read_cmd = spmi_read_cmd;
|
||||
ctrl->write_cmd = spmi_write_cmd;
|
||||
|
||||
ret = spmi_controller_add(ctrl);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "spmi_add_controller failed!\n");
|
||||
goto err_add_controller;
|
||||
}
|
||||
err_add_controller:
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
return ret; /*lint !e429*/
|
||||
}
|
||||
|
||||
static int spmi_del_controller(struct platform_device *pdev)
|
||||
{
|
||||
struct spmi_controller *ctrl = platform_get_drvdata(pdev);
|
||||
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
spmi_controller_remove(ctrl);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct of_device_id spmi_controller_match_table[] = {
|
||||
{ .compatible = "hisilicon,spmi-controller",
|
||||
},/*lint !e785*/
|
||||
{}/*lint !e785*/
|
||||
};
|
||||
|
||||
static struct platform_driver spmi_controller_driver = {
|
||||
.probe = spmi_controller_probe,
|
||||
.remove = spmi_del_controller,
|
||||
.driver = {
|
||||
.name = SPMI_CONTROLLER_NAME,
|
||||
.owner = THIS_MODULE,/*lint !e64*/
|
||||
.of_match_table = spmi_controller_match_table,
|
||||
},/*lint !e785*/
|
||||
};/*lint !e785*/
|
||||
/*lint -e528 -esym(528,*)*/
|
||||
static int __init spmi_controller_init(void)
|
||||
{
|
||||
return platform_driver_register(&spmi_controller_driver);/*lint !e64*/
|
||||
}
|
||||
postcore_initcall(spmi_controller_init);
|
||||
|
||||
static void __exit spmi_controller_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&spmi_controller_driver);
|
||||
}
|
||||
module_exit(spmi_controller_exit);
|
||||
/*lint -e753 -esym(753,*)*/
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_VERSION("1.0");/*lint !e785 !e64 !e528*/
|
||||
MODULE_ALIAS("platform:spmi_controlller");
|
||||
/*lint -e753 +esym(753,*)*/
|
||||
/*lint -e528 +esym(528,*)*/
|
||||
|
Loading…
Reference in New Issue
Block a user