i2c: testunit: add command to support versioning and test rep_start
For some devices, it is essential that controllers handle repeated start correctly and do not replace it with a stop/start combination. This addition helps to test that because it will only return a version string if repeated start is done properly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
This commit is contained in:
parent
faf3c102c6
commit
6b21470af0
@ -133,3 +133,41 @@ later)::
|
||||
|
||||
# i2ctransfer -y 0 w3@0x30 3 1 0x10 r?
|
||||
0x10 0x0f 0x0e 0x0d 0x0c 0x0b 0x0a 0x09 0x08 0x07 0x06 0x05 0x04 0x03 0x02 0x01 0x00
|
||||
|
||||
0x04 GET_VERSION_WITH_REP_START
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - CMD
|
||||
- DATAL
|
||||
- DATAH
|
||||
- DELAY
|
||||
|
||||
* - 0x04
|
||||
- currently unused
|
||||
- currently unused
|
||||
- leave out, partial command!
|
||||
|
||||
Partial command. After sending this command, the testunit will reply to a read
|
||||
message with a NUL terminated version string based on UTS_RELEASE. The first
|
||||
character is always a 'v' and the length of the version string is at maximum
|
||||
128 bytes. However, it will only respond if the read message is connected to
|
||||
the write message via repeated start. If your controller driver handles
|
||||
repeated start correctly, this will work::
|
||||
|
||||
# i2ctransfer -y 0 w3@0x30 4 0 0 r128
|
||||
0x76 0x36 0x2e 0x31 0x31 0x2e 0x30 0x2d 0x72 0x63 0x31 0x2d 0x30 0x30 0x30 0x30 ...
|
||||
|
||||
If you have i2c-tools 4.4 or later, you can print out the data right away::
|
||||
|
||||
# i2ctransfer -y -b 0 w3@0x30 4 0 0 r128
|
||||
v6.11.0-rc1-00009-gd37a1b4d3fd0
|
||||
|
||||
STOP/START combinations between the two messages will *not* work because they
|
||||
are not equivalent to a REPEATED START. As an example, this returns just the
|
||||
default response::
|
||||
|
||||
# i2cset -y 0 0x30 4 0 0 i; i2cget -y 0 0x30
|
||||
0x01
|
||||
|
@ -6,6 +6,7 @@
|
||||
* Copyright (C) 2020 by Renesas Electronics Corporation
|
||||
*/
|
||||
|
||||
#include <generated/utsrelease.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
@ -15,11 +16,13 @@
|
||||
#include <linux/workqueue.h> /* FIXME: is system_long_wq the best choice? */
|
||||
|
||||
#define TU_CUR_VERSION 0x01
|
||||
#define TU_VERSION_MAX_LENGTH 128
|
||||
|
||||
enum testunit_cmds {
|
||||
TU_CMD_READ_BYTES = 1, /* save 0 for ABORT, RESET or similar */
|
||||
TU_CMD_SMBUS_HOST_NOTIFY,
|
||||
TU_CMD_SMBUS_BLOCK_PROC_CALL,
|
||||
TU_CMD_GET_VERSION_WITH_REP_START,
|
||||
TU_NUM_CMDS
|
||||
};
|
||||
|
||||
@ -39,10 +42,13 @@ struct testunit_data {
|
||||
unsigned long flags;
|
||||
u8 regs[TU_NUM_REGS];
|
||||
u8 reg_idx;
|
||||
u8 read_idx;
|
||||
struct i2c_client *client;
|
||||
struct delayed_work worker;
|
||||
};
|
||||
|
||||
static char tu_version_info[] = "v" UTS_RELEASE "\n\0";
|
||||
|
||||
static void i2c_slave_testunit_work(struct work_struct *work)
|
||||
{
|
||||
struct testunit_data *tu = container_of(work, struct testunit_data, worker.work);
|
||||
@ -91,6 +97,8 @@ static int i2c_slave_testunit_slave_cb(struct i2c_client *client,
|
||||
struct testunit_data *tu = i2c_get_clientdata(client);
|
||||
bool is_proc_call = tu->reg_idx == 3 && tu->regs[TU_REG_DATAL] == 1 &&
|
||||
tu->regs[TU_REG_CMD] == TU_CMD_SMBUS_BLOCK_PROC_CALL;
|
||||
bool is_get_version = tu->reg_idx == 3 &&
|
||||
tu->regs[TU_REG_CMD] == TU_CMD_GET_VERSION_WITH_REP_START;
|
||||
int ret = 0;
|
||||
|
||||
switch (event) {
|
||||
@ -100,6 +108,7 @@ static int i2c_slave_testunit_slave_cb(struct i2c_client *client,
|
||||
|
||||
memset(tu->regs, 0, TU_NUM_REGS);
|
||||
tu->reg_idx = 0;
|
||||
tu->read_idx = 0;
|
||||
break;
|
||||
|
||||
case I2C_SLAVE_WRITE_RECEIVED:
|
||||
@ -136,12 +145,21 @@ static int i2c_slave_testunit_slave_cb(struct i2c_client *client,
|
||||
break;
|
||||
|
||||
case I2C_SLAVE_READ_PROCESSED:
|
||||
if (is_proc_call && tu->regs[TU_REG_DATAH])
|
||||
/* Advance until we reach the NUL character */
|
||||
if (is_get_version && tu_version_info[tu->read_idx] != 0)
|
||||
tu->read_idx++;
|
||||
else if (is_proc_call && tu->regs[TU_REG_DATAH])
|
||||
tu->regs[TU_REG_DATAH]--;
|
||||
|
||||
fallthrough;
|
||||
|
||||
case I2C_SLAVE_READ_REQUESTED:
|
||||
*val = is_proc_call ? tu->regs[TU_REG_DATAH] : TU_CUR_VERSION;
|
||||
if (is_get_version)
|
||||
*val = tu_version_info[tu->read_idx];
|
||||
else if (is_proc_call)
|
||||
*val = tu->regs[TU_REG_DATAH];
|
||||
else
|
||||
*val = TU_CUR_VERSION;
|
||||
break;
|
||||
}
|
||||
|
||||
@ -160,6 +178,9 @@ static int i2c_slave_testunit_probe(struct i2c_client *client)
|
||||
i2c_set_clientdata(client, tu);
|
||||
INIT_DELAYED_WORK(&tu->worker, i2c_slave_testunit_work);
|
||||
|
||||
if (sizeof(tu_version_info) > TU_VERSION_MAX_LENGTH)
|
||||
tu_version_info[TU_VERSION_MAX_LENGTH - 1] = 0;
|
||||
|
||||
return i2c_slave_register(client, i2c_slave_testunit_slave_cb);
|
||||
};
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user