1

i3c: dw: Fix IBI intr programming

IBI_SIR_REQ_REJECT register is not present if the IP has
IC_HAS_IBI_DATA = 1 set. So don't rely on doing read-
modify-write op on this register.
Instead maintain a variable to store the sir reject mask
and use it to set IBI_SIR_REQ_REJECT.

Signed-off-by: Aniket <aniketmaurya@google.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This commit is contained in:
Aniket 2024-06-07 07:20:30 +00:00 committed by Alexandre Belloni
parent 8f2cb03279
commit 64bf145908
2 changed files with 9 additions and 8 deletions

View File

@ -658,7 +658,9 @@ static int dw_i3c_master_bus_init(struct i3c_master_controller *m)
if (ret)
return ret;
writel(IBI_REQ_REJECT_ALL, master->regs + IBI_SIR_REQ_REJECT);
master->sir_rej_mask = IBI_REQ_REJECT_ALL;
writel(master->sir_rej_mask, master->regs + IBI_SIR_REQ_REJECT);
writel(IBI_REQ_REJECT_ALL, master->regs + IBI_MR_REQ_REJECT);
/* For now don't support Hot-Join */
@ -1175,17 +1177,16 @@ static void dw_i3c_master_set_sir_enabled(struct dw_i3c_master *master,
master->platform_ops->set_dat_ibi(master, dev, enable, &reg);
writel(reg, master->regs + dat_entry);
reg = readl(master->regs + IBI_SIR_REQ_REJECT);
if (enable) {
global = reg == 0xffffffff;
reg &= ~BIT(idx);
global = (master->sir_rej_mask == IBI_REQ_REJECT_ALL);
master->sir_rej_mask &= ~BIT(idx);
} else {
bool hj_rejected = !!(readl(master->regs + DEVICE_CTRL) & DEV_CTRL_HOT_JOIN_NACK);
reg |= BIT(idx);
global = (reg == 0xffffffff) && hj_rejected;
master->sir_rej_mask |= BIT(idx);
global = (master->sir_rej_mask == IBI_REQ_REJECT_ALL) && hj_rejected;
}
writel(reg, master->regs + IBI_SIR_REQ_REJECT);
writel(master->sir_rej_mask, master->regs + IBI_SIR_REQ_REJECT);
if (global)
dw_i3c_master_enable_sir_signal(master, enable);

View File

@ -39,7 +39,7 @@ struct dw_i3c_master {
char version[5];
char type[5];
bool ibi_capable;
u32 sir_rej_mask;
/*
* Per-device hardware data, used to manage the device address table
* (DAT)