dt-bindings: PCI: rockchip-dw-pcie: Fix description of legacy IRQ
The descriptions of the combined interrupt signals (level1) mention all the lower interrupt signals (level2) for each combined interrupt, regardless if the lower (level2) signal is RC or EP specific. E.g. the description of "Combined system interrupt" includes rbar_update, which is EP specific, and the description of "Combined message interrupt" includes obff_idle, obff_obff, obff_cpu_active, which are all EP specific. The only exception is the "Combined legacy interrupt", which for some reason does not provide an exhaustive list of the lower (level2) signals. Add the missing lower interrupt signals: tx_inta, tx_intb, tx_intc, and tx_intd for the "Combined legacy interrupt", as per the rk3568 and rk3588 Technical Reference Manuals, such that the descriptions of the combined interrupt signals are consistent. Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-5-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
This commit is contained in:
parent
9b0b9b588c
commit
5f262f67cb
@ -56,7 +56,8 @@ properties:
|
||||
pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active
|
||||
- description:
|
||||
Combined legacy interrupt, which is used to signal the following
|
||||
interrupts - inta, intb, intc, intd
|
||||
interrupts - inta, intb, intc, intd, tx_inta, tx_intb, tx_intc,
|
||||
tx_intd
|
||||
- description:
|
||||
Combined error interrupt, which is used to signal the following
|
||||
interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout,
|
||||
|
Loading…
Reference in New Issue
Block a user