regulator: Add support for Richtek RT5739 voltage regulator
The RT5739 is a step-down switching voltage regulator that supports output voltage ragne from 300mV to 1300mV with the wide input supply voltage range from 2.5V to 5.5V. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1676599618-24819-3-git-send-email-cy_huang@richtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
2e238605a9
commit
4536f3b93a
@ -1120,6 +1120,19 @@ config REGULATOR_RT5190A
|
||||
buck converters, 1 LDO, mute AC OFF depop function, with the general
|
||||
I2C control interface.
|
||||
|
||||
config REGULATOR_RT5739
|
||||
tristate "Rcihtek RT5739 Regulator"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This adds support for voltage regulator in Richtek RT5739.
|
||||
It's a step-down switching voltage regulator. Using a proprietary
|
||||
architecture with synchronous rectification, it is capable of
|
||||
delivering 3.5A continuously at over 80% efficiency.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called rt5739.
|
||||
|
||||
config REGULATOR_RT5759
|
||||
tristate "Richtek RT5759 Regulator"
|
||||
depends on I2C
|
||||
|
@ -134,6 +134,7 @@ obj-$(CONFIG_REGULATOR_RT4831) += rt4831-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RT5120) += rt5120-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RT5190A) += rt5190a-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RT5739) += rt5739.o
|
||||
obj-$(CONFIG_REGULATOR_RT5759) += rt5759-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RT6160) += rt6160-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RT6190) += rt6190-regulator.o
|
||||
|
290
drivers/regulator/rt5739.c
Normal file
290
drivers/regulator/rt5739.c
Normal file
@ -0,0 +1,290 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Device driver for RT5739 regulator
|
||||
*
|
||||
* Copyright (C) 2023 Richtek Technology Corp.
|
||||
*
|
||||
* Author: ChiYuan Huang <cy_huang@richtek.com>
|
||||
*/
|
||||
|
||||
#include <linux/bits.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/mod_devicetable.h>
|
||||
#include <linux/property.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
|
||||
#define RT5739_AUTO_MODE 0
|
||||
#define RT5739_FPWM_MODE 1
|
||||
|
||||
#define RT5739_REG_NSEL0 0x00
|
||||
#define RT5739_REG_NSEL1 0x01
|
||||
#define RT5739_REG_CNTL1 0x02
|
||||
#define RT5739_REG_ID1 0x03
|
||||
#define RT5739_REG_CNTL2 0x06
|
||||
#define RT5739_REG_CNTL4 0x08
|
||||
|
||||
#define RT5739_VSEL_MASK GENMASK(7, 0)
|
||||
#define RT5739_MODEVSEL1_MASK BIT(1)
|
||||
#define RT5739_MODEVSEL0_MASK BIT(0)
|
||||
#define RT5739_VID_MASK GENMASK(7, 5)
|
||||
#define RT5739_ACTD_MASK BIT(7)
|
||||
#define RT5739_ENVSEL1_MASK BIT(1)
|
||||
#define RT5739_ENVSEL0_MASK BIT(0)
|
||||
|
||||
#define RT5739_VOLT_MINUV 300000
|
||||
#define RT5739_VOLT_MAXUV 1300000
|
||||
#define RT5739_VOLT_STPUV 5000
|
||||
#define RT5739_N_VOLTS 201
|
||||
#define RT5739_I2CRDY_TIMEUS 1000
|
||||
|
||||
static int rt5739_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
||||
{
|
||||
const struct regulator_desc *desc = rdev->desc;
|
||||
struct regmap *regmap = rdev_get_regmap(rdev);
|
||||
unsigned int mask, val;
|
||||
|
||||
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
||||
mask = RT5739_MODEVSEL0_MASK;
|
||||
else
|
||||
mask = RT5739_MODEVSEL1_MASK;
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_FAST:
|
||||
val = mask;
|
||||
break;
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
val = 0;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return regmap_update_bits(regmap, RT5739_REG_CNTL1, mask, val);
|
||||
}
|
||||
|
||||
static unsigned int rt5739_get_mode(struct regulator_dev *rdev)
|
||||
{
|
||||
const struct regulator_desc *desc = rdev->desc;
|
||||
struct regmap *regmap = rdev_get_regmap(rdev);
|
||||
unsigned int mask, val;
|
||||
int ret;
|
||||
|
||||
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
||||
mask = RT5739_MODEVSEL0_MASK;
|
||||
else
|
||||
mask = RT5739_MODEVSEL1_MASK;
|
||||
|
||||
ret = regmap_read(regmap, RT5739_REG_CNTL1, &val);
|
||||
if (ret)
|
||||
return REGULATOR_MODE_INVALID;
|
||||
|
||||
if (val & mask)
|
||||
return REGULATOR_MODE_FAST;
|
||||
|
||||
return REGULATOR_MODE_NORMAL;
|
||||
}
|
||||
|
||||
static int rt5739_set_suspend_voltage(struct regulator_dev *rdev, int uV)
|
||||
{
|
||||
const struct regulator_desc *desc = rdev->desc;
|
||||
struct regmap *regmap = rdev_get_regmap(rdev);
|
||||
unsigned int reg, vsel;
|
||||
|
||||
if (uV < RT5739_VOLT_MINUV || uV > RT5739_VOLT_MAXUV)
|
||||
return -EINVAL;
|
||||
|
||||
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
||||
reg = RT5739_REG_NSEL1;
|
||||
else
|
||||
reg = RT5739_REG_NSEL0;
|
||||
|
||||
vsel = (uV - RT5739_VOLT_MINUV) / RT5739_VOLT_STPUV;
|
||||
return regmap_write(regmap, reg, vsel);
|
||||
}
|
||||
|
||||
static int rt5739_set_suspend_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
const struct regulator_desc *desc = rdev->desc;
|
||||
struct regmap *regmap = rdev_get_regmap(rdev);
|
||||
unsigned int mask;
|
||||
|
||||
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
||||
mask = RT5739_ENVSEL1_MASK;
|
||||
else
|
||||
mask = RT5739_ENVSEL0_MASK;
|
||||
|
||||
return regmap_update_bits(regmap, desc->enable_reg, mask, mask);
|
||||
}
|
||||
|
||||
static int rt5739_set_suspend_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
const struct regulator_desc *desc = rdev->desc;
|
||||
struct regmap *regmap = rdev_get_regmap(rdev);
|
||||
unsigned int mask;
|
||||
|
||||
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
||||
mask = RT5739_ENVSEL1_MASK;
|
||||
else
|
||||
mask = RT5739_ENVSEL0_MASK;
|
||||
|
||||
return regmap_update_bits(regmap, desc->enable_reg, mask, 0);
|
||||
}
|
||||
|
||||
static int rt5739_set_suspend_mode(struct regulator_dev *rdev,
|
||||
unsigned int mode)
|
||||
{
|
||||
const struct regulator_desc *desc = rdev->desc;
|
||||
struct regmap *regmap = rdev_get_regmap(rdev);
|
||||
unsigned int mask, val;
|
||||
|
||||
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
||||
mask = RT5739_MODEVSEL1_MASK;
|
||||
else
|
||||
mask = RT5739_MODEVSEL0_MASK;
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_FAST:
|
||||
val = mask;
|
||||
break;
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
val = 0;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return regmap_update_bits(regmap, RT5739_REG_CNTL1, mask, val);
|
||||
}
|
||||
|
||||
static const struct regulator_ops rt5739_regulator_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.set_active_discharge = regulator_set_active_discharge_regmap,
|
||||
.set_mode = rt5739_set_mode,
|
||||
.get_mode = rt5739_get_mode,
|
||||
.set_suspend_voltage = rt5739_set_suspend_voltage,
|
||||
.set_suspend_enable = rt5739_set_suspend_enable,
|
||||
.set_suspend_disable = rt5739_set_suspend_disable,
|
||||
.set_suspend_mode = rt5739_set_suspend_mode,
|
||||
};
|
||||
|
||||
static unsigned int rt5739_of_map_mode(unsigned int mode)
|
||||
{
|
||||
switch (mode) {
|
||||
case RT5739_AUTO_MODE:
|
||||
return REGULATOR_MODE_NORMAL;
|
||||
case RT5739_FPWM_MODE:
|
||||
return REGULATOR_MODE_FAST;
|
||||
default:
|
||||
return REGULATOR_MODE_INVALID;
|
||||
}
|
||||
}
|
||||
|
||||
static void rt5739_init_regulator_desc(struct regulator_desc *desc,
|
||||
bool vsel_active_high)
|
||||
{
|
||||
/* Fixed */
|
||||
desc->name = "rt5739-regulator";
|
||||
desc->owner = THIS_MODULE;
|
||||
desc->ops = &rt5739_regulator_ops;
|
||||
desc->n_voltages = RT5739_N_VOLTS;
|
||||
desc->min_uV = RT5739_VOLT_MINUV;
|
||||
desc->uV_step = RT5739_VOLT_STPUV;
|
||||
desc->vsel_mask = RT5739_VSEL_MASK;
|
||||
desc->enable_reg = RT5739_REG_CNTL2;
|
||||
desc->active_discharge_reg = RT5739_REG_CNTL1;
|
||||
desc->active_discharge_mask = RT5739_ACTD_MASK;
|
||||
desc->active_discharge_on = RT5739_ACTD_MASK;
|
||||
desc->of_map_mode = rt5739_of_map_mode;
|
||||
|
||||
/* Assigned by vsel level */
|
||||
if (vsel_active_high) {
|
||||
desc->vsel_reg = RT5739_REG_NSEL1;
|
||||
desc->enable_mask = RT5739_ENVSEL1_MASK;
|
||||
} else {
|
||||
desc->vsel_reg = RT5739_REG_NSEL0;
|
||||
desc->enable_mask = RT5739_ENVSEL0_MASK;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct regmap_config rt5739_regmap_config = {
|
||||
.name = "rt5739",
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = RT5739_REG_CNTL4,
|
||||
};
|
||||
|
||||
static int rt5739_probe(struct i2c_client *i2c)
|
||||
{
|
||||
struct device *dev = &i2c->dev;
|
||||
struct regulator_desc *desc;
|
||||
struct regmap *regmap;
|
||||
struct gpio_desc *enable_gpio;
|
||||
struct regulator_config cfg = {};
|
||||
struct regulator_dev *rdev;
|
||||
bool vsel_acth;
|
||||
unsigned int vid;
|
||||
int ret;
|
||||
|
||||
desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
|
||||
if (!desc)
|
||||
return -ENOMEM;
|
||||
|
||||
enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(enable_gpio))
|
||||
return dev_err_probe(dev, PTR_ERR(enable_gpio), "Failed to get 'enable' gpio\n");
|
||||
else if (enable_gpio)
|
||||
usleep_range(RT5739_I2CRDY_TIMEUS, RT5739_I2CRDY_TIMEUS + 1000);
|
||||
|
||||
regmap = devm_regmap_init_i2c(i2c, &rt5739_regmap_config);
|
||||
if (IS_ERR(regmap))
|
||||
return dev_err_probe(dev, PTR_ERR(regmap), "Failed to init regmap\n");
|
||||
|
||||
ret = regmap_read(regmap, RT5739_REG_ID1, &vid);
|
||||
if (ret)
|
||||
return dev_err_probe(dev, ret, "Failed to read VID\n");
|
||||
|
||||
/* RT5739: (VID & MASK) must be 0 */
|
||||
if (vid & RT5739_VID_MASK)
|
||||
return dev_err_probe(dev, -ENODEV, "Incorrect VID (0x%02x)\n", vid);
|
||||
|
||||
vsel_acth = device_property_read_bool(dev, "richtek,vsel-active-high");
|
||||
|
||||
rt5739_init_regulator_desc(desc, vsel_acth);
|
||||
|
||||
cfg.dev = dev;
|
||||
cfg.of_node = dev_of_node(dev);
|
||||
cfg.init_data = of_get_regulator_init_data(dev, dev_of_node(dev), desc);
|
||||
rdev = devm_regulator_register(dev, desc, &cfg);
|
||||
if (IS_ERR(rdev))
|
||||
return dev_err_probe(dev, PTR_ERR(rdev), "Failed to register regulator\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id rt5739_device_table[] = {
|
||||
{ .compatible = "richtek,rt5739" },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, rt5739_device_table);
|
||||
|
||||
static struct i2c_driver rt5739_driver = {
|
||||
.driver = {
|
||||
.name = "rt5739",
|
||||
.of_match_table = rt5739_device_table,
|
||||
},
|
||||
.probe_new = rt5739_probe,
|
||||
};
|
||||
module_i2c_driver(rt5739_driver);
|
||||
|
||||
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
|
||||
MODULE_DESCRIPTION("Richtek RT5739 regulator driver");
|
||||
MODULE_LICENSE("GPL");
|
Loading…
Reference in New Issue
Block a user