kevin/linux
1
Fork 0
Code

spi: microchip-core: fix init function not setting the master and motorola modes

Browse Source 
mchp_corespi_init() reads the CONTROL register, sets the master and
motorola bits, but doesn't write the value back to the register. The
function also doesn't ensure the controller is disabled at the start,
which may present a problem if the controller was used by an
earlier boot stage as some settings (including the mode) can only be
modified while the controller is disabled.

Fixes: 9ac8d17694 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-designing-thus-05f7c26e1da7@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Steve Wilkins 2024-07-15 12:13:55 +01:00 committed by Mark Brown
parent de9850b5c6
commit 3a5e762836
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
1 changed files with 9 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
drivers/spi/spi-microchip-core.c
View File

@ -295,17 +295,13 @@ static void mchp_corespi_init(struct spi_controller *host, struct mchp_corespi *
unsigned long clk_hz;
u32 control = mchp_corespi_read(spi, REG_CONTROL);
control |= CONTROL_MASTER;
control &= ~CONTROL_ENABLE;
mchp_corespi_write(spi, REG_CONTROL, control);
control |= CONTROL_MASTER;
control &= ~CONTROL_MODE_MASK;
control |= MOTOROLA_MODE;
mchp_corespi_set_framesize(spi, DEFAULT_FRAMESIZE);
/* max. possible spi clock rate is the apb clock rate */
clk_hz = clk_get_rate(spi->clk);
host->max_speed_hz = clk_hz;
/*
* The controller must be configured so that it doesn't remove Chip
* Select until the entire message has been transferred, even if at
@ -314,11 +310,16 @@ static void mchp_corespi_init(struct spi_controller *host, struct mchp_corespi *
* BIGFIFO mode is also enabled, which sets the fifo depth to 32 frames
* for the 8 bit transfers that this driver uses.
*/
control = mchp_corespi_read(spi, REG_CONTROL);
control |= CONTROL_SPS | CONTROL_BIGFIFO;
mchp_corespi_write(spi, REG_CONTROL, control);
mchp_corespi_set_framesize(spi, DEFAULT_FRAMESIZE);
/* max. possible spi clock rate is the apb clock rate */
clk_hz = clk_get_rate(spi->clk);
host->max_speed_hz = clk_hz;
mchp_corespi_enable_ints(spi);
/*