media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() to set xvclk on/off
On some platform(imx6q), xvclk might not switch on in advance, also for power save purpose, xvclk should not be always on. so, add clk_prepare_enable(), clk_disable_unprepare() in driver side to set xvclk on/off at proper stage. Add following changes: - add 'struct clk *clk;' in 'struct ov2659 {}' - enable xvclk in ov2659_power_on() - disable xvclk in ov2659_power_off() Signed-off-by: Dillon Min <dillon.minfei@gmail.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This commit is contained in:
parent
2cb2705cf7
commit
24786ccd9c
@ -204,6 +204,7 @@ struct ov2659 {
|
||||
struct i2c_client *client;
|
||||
struct v4l2_ctrl_handler ctrls;
|
||||
struct v4l2_ctrl *link_frequency;
|
||||
struct clk *clk;
|
||||
const struct ov2659_framesize *frame_size;
|
||||
struct sensor_register *format_ctrl_regs;
|
||||
struct ov2659_pll_ctrl pll;
|
||||
@ -1268,6 +1269,8 @@ static int ov2659_power_off(struct device *dev)
|
||||
|
||||
gpiod_set_value(ov2659->pwdn_gpio, 1);
|
||||
|
||||
clk_disable_unprepare(ov2659->clk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -1276,9 +1279,17 @@ static int ov2659_power_on(struct device *dev)
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
||||
struct ov2659 *ov2659 = to_ov2659(sd);
|
||||
int ret;
|
||||
|
||||
dev_dbg(&client->dev, "%s:\n", __func__);
|
||||
|
||||
ret = clk_prepare_enable(ov2659->clk);
|
||||
if (ret) {
|
||||
dev_err(&client->dev, "%s: failed to enable clock\n",
|
||||
__func__);
|
||||
return ret;
|
||||
}
|
||||
|
||||
gpiod_set_value(ov2659->pwdn_gpio, 0);
|
||||
|
||||
if (ov2659->resetb_gpio) {
|
||||
@ -1423,7 +1434,6 @@ static int ov2659_probe(struct i2c_client *client)
|
||||
const struct ov2659_platform_data *pdata = ov2659_get_pdata(client);
|
||||
struct v4l2_subdev *sd;
|
||||
struct ov2659 *ov2659;
|
||||
struct clk *clk;
|
||||
int ret;
|
||||
|
||||
if (!pdata) {
|
||||
@ -1438,11 +1448,11 @@ static int ov2659_probe(struct i2c_client *client)
|
||||
ov2659->pdata = pdata;
|
||||
ov2659->client = client;
|
||||
|
||||
clk = devm_clk_get(&client->dev, "xvclk");
|
||||
if (IS_ERR(clk))
|
||||
return PTR_ERR(clk);
|
||||
ov2659->clk = devm_clk_get(&client->dev, "xvclk");
|
||||
if (IS_ERR(ov2659->clk))
|
||||
return PTR_ERR(ov2659->clk);
|
||||
|
||||
ov2659->xvclk_frequency = clk_get_rate(clk);
|
||||
ov2659->xvclk_frequency = clk_get_rate(ov2659->clk);
|
||||
if (ov2659->xvclk_frequency < 6000000 ||
|
||||
ov2659->xvclk_frequency > 27000000)
|
||||
return -EINVAL;
|
||||
@ -1504,7 +1514,9 @@ static int ov2659_probe(struct i2c_client *client)
|
||||
ov2659->frame_size = &ov2659_framesizes[2];
|
||||
ov2659->format_ctrl_regs = ov2659_formats[0].format_ctrl_regs;
|
||||
|
||||
ov2659_power_on(&client->dev);
|
||||
ret = ov2659_power_on(&client->dev);
|
||||
if (ret < 0)
|
||||
goto error;
|
||||
|
||||
ret = ov2659_detect(sd);
|
||||
if (ret < 0)
|
||||
|
Loading…
Reference in New Issue
Block a user