i.MX fixes for 6.10:
- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board. - Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase immunity against noise. - Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that SDIO cards could also work. - Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board. - Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive doesn't really delete a node in a DT overlay. - Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM. - Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in the SOM dtsi. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmZvsOEUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM5gAAf/dv5/cYTuA8MRKAM9Zf0Mf+FKGTDa /kgfsMz/zkSUke54ZI9clo9laoTyhucPjPu6mUJ7AkbsMiptUQ3fiV1mM+TWuQLV inlg5qUDvD6JFTiR1Dkm5ML0kyiqbRV6/bHGSCT/tmsqj14xZRgWgavh2e4UKavs upY1Rj1jaxjc+bycSW9IBTdPvpbNGDgEmBw1YkJysrqnRK3YSOU1QD/xYFKyEtJh X9gyYc8dmTmuNw3P8Go7T0ABQfYSz/m1hyZEEXWq6rx7xm11LtW+/TnNTcRXxtNM 2WA/DBbCSlaUafZ2zwavb4l+ibr80VlVEechzEJxfrf5Df6Kq8Sv+Qh9eg== =GHYs -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmZ0l9gACgkQYKtH/8kJ Uifh1Q//e/X01f/4fhzWRg3+wnIstJjtcjmZHsYA4YWMs7/1VFYthlpsOCb7RG9z thFLeif8EpOi+N0luwLob1XeaQDddVktF5PwerPFnY9JE7u3U0w4jvE7D++MUTHQ JI4iuqVcFiqOgbcGKrRnVF3/iRQO7wT/QP+bRFypLleUI4VY/imyR9Wrc1BsRXnf ruO7xcu5x7uR8E5lvI8/LDkjux8MAqyIICBRK4Bs2vsQ1yiPdm84TzeNWDUvTqbe qXdgqw26pVhMm5U4qYwWXqqkO50Tmsk8RKyi6ZEU5WgGXgRHgaBUlDB7rKZunZuM Z10F/vCeb3Qz4XD+6LI+1yRLclGHP+pyOLCXLC/rIsbcGrBFiF3vrjT5CK6nQoFz Km7feswlNdZEXry2gs5gPlOvwDcNw1KDyCWAHi9cdb3MJgM3YtimaPA0j9fhsdY6 W9s2LpOID9BshzoQePaLPsQumHEe2LzPpJeUbHHqEmgTxTEW8hwr3WwkbI7AUtoJ wfMkpMX40IsZpV82LAvkEIhsFcmMXshMmnfEVkw+Up80zTIe+wqKyool/ACtX3Wl ANL+eetLrsNXhHyZQ5CMpn9lIavNFdoe5ab/O2mcaduKBRXLUpdrzE6dtsUz/aML lrfHHALcAkYNvXgFVA6hEMswDWkHgQHUrtzgnHaD307hIj4Oj0U= =okOh -----END PGP SIGNATURE----- Merge tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.10: - Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board. - Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase immunity against noise. - Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that SDIO cards could also work. - Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board. - Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive doesn't really delete a node in a DT overlay. - Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM. - Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in the SOM dtsi. * tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM arm64: dts: freescale: imx8mm-verdin: Fix GPU speed Link: https://lore.kernel.org/r/Zm+xVUmFtaOnYBb4@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
commit
238f636ddc
@ -85,7 +85,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
panel {
|
||||
panel_dpi: panel {
|
||||
compatible = "sii,43wvf1g";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_display_power>;
|
||||
|
@ -10,8 +10,6 @@
|
||||
/plugin/;
|
||||
|
||||
&{/} {
|
||||
/delete-node/ panel;
|
||||
|
||||
hdmi: connector-hdmi {
|
||||
compatible = "hdmi-connector";
|
||||
label = "hdmi";
|
||||
@ -82,6 +80,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&panel_dpi {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&tve {
|
||||
status = "disabled";
|
||||
};
|
||||
|
@ -6,6 +6,7 @@
|
||||
#include <dt-bindings/phy/phy-imx8-pcie.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "imx8mm.dtsi"
|
||||
#include "imx8mm-overdrive.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
@ -935,7 +936,7 @@
|
||||
/* Verdin GPIO_9_DSI (pulled-up as active-low) */
|
||||
pinctrl_gpio_9_dsi: gpio9dsigrp {
|
||||
fsl,pins =
|
||||
<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x146>; /* SODIMM 17 */
|
||||
<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x1c6>; /* SODIMM 17 */
|
||||
};
|
||||
|
||||
/* Verdin GPIO_10_DSI (pulled-up as active-low) */
|
||||
|
@ -254,7 +254,7 @@
|
||||
<&clk IMX8MP_CLK_CLKOUT2>,
|
||||
<&clk IMX8MP_AUDIO_PLL2_OUT>;
|
||||
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
|
||||
assigned-clock-rates = <13000000>, <13000000>, <156000000>;
|
||||
assigned-clock-rates = <13000000>, <13000000>, <208000000>;
|
||||
reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
|
||||
status = "disabled";
|
||||
|
||||
|
@ -219,7 +219,7 @@
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4330-bt";
|
||||
shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -36,7 +36,7 @@
|
||||
regulator-name = "SD1_SPWR";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
|
@ -296,7 +296,6 @@
|
||||
vmmc-supply = <®_usdhc2_vmmc>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
};
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user