From 2c547549ac69380bb03b495c5ef3dbc03c9c7a48 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 17 Apr 2024 13:54:28 +0300 Subject: [PATCH 1/9] spi: pxa2xx: Allow number of chip select pins to be read from property In some cases the number of the chip select pins might come from the device property. Allow driver to use it. Signed-off-by: Andy Shevchenko Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240417110334.2671228-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 2f60b2fde8d5..ab6fd55237cd 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1357,6 +1357,7 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev) struct ssp_device *ssp = NULL; const void *match; bool is_lpss_priv; + u32 num_cs = 1; int status; is_lpss_priv = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lpss_priv"); @@ -1395,8 +1396,11 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev) pdata->dma_filter = pxa2xx_spi_idma_filter; } + /* Read number of chip select pins, if provided */ + device_property_read_u32(dev, "num-cs", &num_cs); + + pdata->num_chipselect = num_cs; pdata->is_target = device_property_read_bool(dev, "spi-slave"); - pdata->num_chipselect = 1; pdata->enable_dma = true; pdata->dma_burst_size = 1; From 11346db50616698b04da44a62d4fac17d9227a62 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 17 Apr 2024 13:54:29 +0300 Subject: [PATCH 2/9] spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties Since driver can parse num-cs device property, replace platform data with this new approach. This pursues the following objectives: - getting rid of the public header that barely used outside of the SPI subsystem (more specifically the SPI PXA2xx drivers) - making a trampoline for the driver to support non-default number of the chip select pins in case the original code is going to be converted to Device Tree model It's not expected to have more users in board files except this one. Signed-off-by: Andy Shevchenko Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240417110334.2671228-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- arch/arm/mach-pxa/spitz.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 318402ad685e..3c5f5a3cb480 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -18,10 +18,10 @@ #include #include #include +#include #include #include #include -#include #include #include #include @@ -569,10 +569,6 @@ static struct spi_board_info spitz_spi_devices[] = { }, }; -static struct pxa2xx_spi_controller spitz_spi_info = { - .num_chipselect = 3, -}; - static struct gpiod_lookup_table spitz_spi_gpio_table = { .dev_id = "spi2", .table = { @@ -583,10 +579,20 @@ static struct gpiod_lookup_table spitz_spi_gpio_table = { }, }; +static const struct property_entry spitz_spi_properties[] = { + PROPERTY_ENTRY_U32("num-cs", 3), + { } +}; + +static const struct software_node spitz_spi_node = { + .properties = spitz_spi_properties, +}; + static void __init spitz_spi_init(void) { struct platform_device *pd; int id = 2; + int err; if (machine_is_akita()) gpiod_add_lookup_table(&akita_lcdcon_gpio_table); @@ -601,8 +607,13 @@ static void __init spitz_spi_init(void) if (pd == NULL) { pr_err("pxa2xx-spi: failed to allocate device id %d\n", id); } else { - pd->dev.platform_data = &spitz_spi_info; - platform_device_add(pd); + err = device_add_software_node(&pd->dev, &spitz_spi_node); + if (err) { + platform_device_put(pd); + pr_err("pxa2xx-spi: failed to add software node\n"); + } else { + platform_device_add(pd); + } } spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); From 2a45166938f145294b73445b0af997b3100f02b4 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 17 Apr 2024 13:54:30 +0300 Subject: [PATCH 3/9] spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one There is no user of the linux/spi/pxa2xx_spi.h. Move its contents to the drivers/spi/spi-pxa2xx.h. Suggested-by: Arnd Bergmann Signed-off-by: Andy Shevchenko Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240417110334.2671228-4-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx-dma.c | 1 - drivers/spi/spi-pxa2xx-pci.c | 4 +-- drivers/spi/spi-pxa2xx.c | 1 - drivers/spi/spi-pxa2xx.h | 36 ++++++++++++++++++++++++- include/linux/spi/pxa2xx_spi.h | 48 ---------------------------------- 5 files changed, 37 insertions(+), 53 deletions(-) delete mode 100644 include/linux/spi/pxa2xx_spi.h diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c index be563f0dd03a..26416ced6505 100644 --- a/drivers/spi/spi-pxa2xx-dma.c +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -12,7 +12,6 @@ #include #include -#include #include #include "spi-pxa2xx.h" diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 861b21c63504..e11a613bc340 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -10,11 +10,11 @@ #include #include -#include - #include #include +#include "spi-pxa2xx.h" + #define PCI_DEVICE_ID_INTEL_QUARK_X1000 0x0935 #define PCI_DEVICE_ID_INTEL_BYT 0x0f0e #define PCI_DEVICE_ID_INTEL_MRFLD 0x1194 diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index ab6fd55237cd..82633682b581 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -24,7 +24,6 @@ #include #include -#include #include #include "spi-pxa2xx.h" diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index 45cdbbc71c4b..08296729ea80 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -7,6 +7,7 @@ #ifndef SPI_PXA2XX_H #define SPI_PXA2XX_H +#include #include #include #include @@ -15,7 +16,40 @@ #include struct gpio_desc; -struct pxa2xx_spi_controller; + +/* + * The platform data for SSP controller devices + * (resides in device.platform_data). + */ +struct pxa2xx_spi_controller { + u8 num_chipselect; + u8 enable_dma; + u8 dma_burst_size; + bool is_target; + + /* DMA engine specific config */ + dma_filter_fn dma_filter; + void *tx_param; + void *rx_param; + + /* For non-PXA arches */ + struct ssp_device ssp; +}; + +/* + * The controller specific data for SPI target devices + * (resides in spi_board_info.controller_data), + * copied to spi_device.platform_data ... mostly for + * DMA tuning. + */ +struct pxa2xx_spi_chip { + u8 tx_threshold; + u8 tx_hi_threshold; + u8 rx_threshold; + u8 dma_burst_size; + u32 timeout; +}; + struct spi_controller; struct spi_device; struct spi_transfer; diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h deleted file mode 100644 index e5a4a045fb67..000000000000 --- a/include/linux/spi/pxa2xx_spi.h +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs - */ -#ifndef __LINUX_SPI_PXA2XX_SPI_H -#define __LINUX_SPI_PXA2XX_SPI_H - -#include -#include - -#include - -struct dma_chan; - -/* - * The platform data for SSP controller devices - * (resides in device.platform_data). - */ -struct pxa2xx_spi_controller { - u8 num_chipselect; - u8 enable_dma; - u8 dma_burst_size; - bool is_target; - - /* DMA engine specific config */ - dma_filter_fn dma_filter; - void *tx_param; - void *rx_param; - - /* For non-PXA arches */ - struct ssp_device ssp; -}; - -/* - * The controller specific data for SPI target devices - * (resides in spi_board_info.controller_data), - * copied to spi_device.platform_data ... mostly for - * DMA tuning. - */ -struct pxa2xx_spi_chip { - u8 tx_threshold; - u8 tx_hi_threshold; - u8 rx_threshold; - u8 dma_burst_size; - u32 timeout; -}; - -#endif /* __LINUX_SPI_PXA2XX_SPI_H */ From 2d069c11e8229e9f380af0c3bffe4b95cd2cf9ec Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 17 Apr 2024 13:54:31 +0300 Subject: [PATCH 4/9] spi: pxa2xx: Remove outdated documentation The documentation is referring to the legacy enumeration of the SPI host controllers and target devices. It has nothing to do with the modern way, which is the only supported in kernel right now. Hence, remove outdated documentation file. Signed-off-by: Andy Shevchenko Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240417110334.2671228-5-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- Documentation/spi/pxa2xx.rst | 208 ----------------------------------- drivers/spi/Kconfig | 3 +- 2 files changed, 1 insertion(+), 210 deletions(-) delete mode 100644 Documentation/spi/pxa2xx.rst diff --git a/Documentation/spi/pxa2xx.rst b/Documentation/spi/pxa2xx.rst deleted file mode 100644 index 33d2ad95901e..000000000000 --- a/Documentation/spi/pxa2xx.rst +++ /dev/null @@ -1,208 +0,0 @@ -============================== -PXA2xx SPI on SSP driver HOWTO -============================== - -This a mini HOWTO on the pxa2xx_spi driver. The driver turns a PXA2xx -synchronous serial port into an SPI host controller -(see Documentation/spi/spi-summary.rst). The driver has the following features - -- Support for any PXA2xx and compatible SSP. -- SSP PIO and SSP DMA data transfers. -- External and Internal (SSPFRM) chip selects. -- Per peripheral device (chip) configuration. -- Full suspend, freeze, resume support. - -The driver is built around a &struct spi_message FIFO serviced by kernel -thread. The kernel thread, spi_pump_messages(), drives message FIFO and -is responsible for queuing SPI transactions and setting up and launching -the DMA or interrupt driven transfers. - -Declaring PXA2xx host controllers ---------------------------------- -Typically, for a legacy platform, an SPI host controller is defined in the -arch/.../mach-*/board-*.c as a "platform device". The host controller configuration -is passed to the driver via a table found in include/linux/spi/pxa2xx_spi.h:: - - struct pxa2xx_spi_controller { - u8 num_chipselect; - u8 enable_dma; - ... - }; - -The "pxa2xx_spi_controller.num_chipselect" field is used to determine the number of -peripheral devices (chips) attached to this SPI host controller. - -The "pxa2xx_spi_controller.enable_dma" field informs the driver that SSP DMA should -be used. This caused the driver to acquire two DMA channels: Rx channel and -Tx channel. The Rx channel has a higher DMA service priority than the Tx channel. -See the "PXA2xx Developer Manual" section "DMA Controller". - -For the new platforms the description of the controller and peripheral devices -comes from Device Tree or ACPI. - -NSSP HOST SAMPLE ----------------- -Below is a sample configuration using the PXA255 NSSP for a legacy platform:: - - static struct resource pxa_spi_nssp_resources[] = { - [0] = { - .start = __PREG(SSCR0_P(2)), /* Start address of NSSP */ - .end = __PREG(SSCR0_P(2)) + 0x2c, /* Range of registers */ - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_NSSP, /* NSSP IRQ */ - .end = IRQ_NSSP, - .flags = IORESOURCE_IRQ, - }, - }; - - static struct pxa2xx_spi_controller pxa_nssp_controller_info = { - .num_chipselect = 1, /* Matches the number of chips attached to NSSP */ - .enable_dma = 1, /* Enables NSSP DMA */ - }; - - static struct platform_device pxa_spi_nssp = { - .name = "pxa2xx-spi", /* MUST BE THIS VALUE, so device match driver */ - .id = 2, /* Bus number, MUST MATCH SSP number 1..n */ - .resource = pxa_spi_nssp_resources, - .num_resources = ARRAY_SIZE(pxa_spi_nssp_resources), - .dev = { - .platform_data = &pxa_nssp_controller_info, /* Passed to driver */ - }, - }; - - static struct platform_device *devices[] __initdata = { - &pxa_spi_nssp, - }; - - static void __init board_init(void) - { - (void)platform_add_device(devices, ARRAY_SIZE(devices)); - } - -Declaring peripheral devices ----------------------------- -Typically, for a legacy platform, each SPI peripheral device (chip) is defined in the -arch/.../mach-*/board-*.c using the "spi_board_info" structure found in -"linux/spi/spi.h". See "Documentation/spi/spi-summary.rst" for additional -information. - -Each peripheral device (chip) attached to the PXA2xx must provide specific chip configuration -information via the structure "pxa2xx_spi_chip" found in -"include/linux/spi/pxa2xx_spi.h". The PXA2xx host controller driver will use -the configuration whenever the driver communicates with the peripheral -device. All fields are optional. - -:: - - struct pxa2xx_spi_chip { - u8 tx_threshold; - u8 rx_threshold; - u8 dma_burst_size; - u32 timeout; - }; - -The "pxa2xx_spi_chip.tx_threshold" and "pxa2xx_spi_chip.rx_threshold" fields are -used to configure the SSP hardware FIFO. These fields are critical to the -performance of pxa2xx_spi driver and misconfiguration will result in rx -FIFO overruns (especially in PIO mode transfers). Good default values are:: - - .tx_threshold = 8, - .rx_threshold = 8, - -The range is 1 to 16 where zero indicates "use default". - -The "pxa2xx_spi_chip.dma_burst_size" field is used to configure PXA2xx DMA -engine and is related the "spi_device.bits_per_word" field. Read and understand -the PXA2xx "Developer Manual" sections on the DMA controller and SSP Controllers -to determine the correct value. An SSP configured for byte-wide transfers would -use a value of 8. The driver will determine a reasonable default if -dma_burst_size == 0. - -The "pxa2xx_spi_chip.timeout" fields is used to efficiently handle -trailing bytes in the SSP receiver FIFO. The correct value for this field is -dependent on the SPI bus speed ("spi_board_info.max_speed_hz") and the specific -peripheral device. Please note that the PXA2xx SSP 1 does not support trailing byte -timeouts and must busy-wait any trailing bytes. - -NOTE: the SPI driver cannot control the chip select if SSPFRM is used, so the -chipselect is dropped after each spi_transfer. Most devices need chip select -asserted around the complete message. Use SSPFRM as a GPIO (through a descriptor) -to accommodate these chips. - - -NSSP PERIPHERAL SAMPLE ----------------------- -For a legacy platform or in some other cases, the pxa2xx_spi_chip structure -is passed to the pxa2xx_spi driver in the "spi_board_info.controller_data" -field. Below is a sample configuration using the PXA255 NSSP. - -:: - - static struct pxa2xx_spi_chip cs8415a_chip_info = { - .tx_threshold = 8, /* SSP hardware FIFO threshold */ - .rx_threshold = 8, /* SSP hardware FIFO threshold */ - .dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */ - .timeout = 235, /* See Intel documentation */ - }; - - static struct pxa2xx_spi_chip cs8405a_chip_info = { - .tx_threshold = 8, /* SSP hardware FIFO threshold */ - .rx_threshold = 8, /* SSP hardware FIFO threshold */ - .dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */ - .timeout = 235, /* See Intel documentation */ - }; - - static struct spi_board_info streetracer_spi_board_info[] __initdata = { - { - .modalias = "cs8415a", /* Name of spi_driver for this device */ - .max_speed_hz = 3686400, /* Run SSP as fast a possible */ - .bus_num = 2, /* Framework bus number */ - .chip_select = 0, /* Framework chip select */ - .platform_data = NULL; /* No spi_driver specific config */ - .controller_data = &cs8415a_chip_info, /* Host controller config */ - .irq = STREETRACER_APCI_IRQ, /* Peripheral device interrupt */ - }, - { - .modalias = "cs8405a", /* Name of spi_driver for this device */ - .max_speed_hz = 3686400, /* Run SSP as fast a possible */ - .bus_num = 2, /* Framework bus number */ - .chip_select = 1, /* Framework chip select */ - .controller_data = &cs8405a_chip_info, /* Host controller config */ - .irq = STREETRACER_APCI_IRQ, /* Peripheral device interrupt */ - }, - }; - - static void __init streetracer_init(void) - { - spi_register_board_info(streetracer_spi_board_info, - ARRAY_SIZE(streetracer_spi_board_info)); - } - - -DMA and PIO I/O Support ------------------------ -The pxa2xx_spi driver supports both DMA and interrupt driven PIO message -transfers. The driver defaults to PIO mode and DMA transfers must be enabled -by setting the "enable_dma" flag in the "pxa2xx_spi_controller" structure. -For the newer platforms, that are known to support DMA, the driver will enable -it automatically and try it first with a possible fallback to PIO. The DMA -mode supports both coherent and stream based DMA mappings. - -The following logic is used to determine the type of I/O to be used on -a per "spi_transfer" basis:: - - if spi_message.len > 65536 then - print "rate limited" warning - use PIO transfers - - if enable_dma and the size is in the range [DMA burst size..65536] then - use streaming DMA mode - - otherwise - use PIO transfer - -THANKS TO ---------- -David Brownell and others for mentoring the development of this driver. diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 86f6115f417c..e2d2f011f973 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -832,8 +832,7 @@ config SPI_PXA2XX select PXA_SSP if ARCH_PXA || ARCH_MMP help This enables using a PXA2xx or Sodaville SSP port as a SPI master - controller. The driver can be configured to use any SSP port and - additional documentation can be found a Documentation/spi/pxa2xx.rst. + controller. The driver can be configured to use any SSP port. config SPI_PXA2XX_PCI def_tristate SPI_PXA2XX && PCI && COMMON_CLK From 4091770969bffba9dcb071b81d4010331d4dbee7 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 17 Apr 2024 13:54:32 +0300 Subject: [PATCH 5/9] spi: pxa2xx: Don't use "proxy" headers Update header inclusions to follow IWYU (Include What You Use) principle. Signed-off-by: Andy Shevchenko Acked-by: Linus Walleij Link: https://lore.kernel.org/r/20240417110334.2671228-6-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx-dma.c | 10 ++++++++-- drivers/spi/spi-pxa2xx-pci.c | 6 ++++++ drivers/spi/spi-pxa2xx.c | 10 +++++++--- drivers/spi/spi-pxa2xx.h | 3 +-- 4 files changed, 22 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c index 26416ced6505..751cb0f77b62 100644 --- a/drivers/spi/spi-pxa2xx-dma.c +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -6,16 +6,22 @@ * Author: Mika Westerberg */ -#include +#include +#include #include #include +#include +#include #include -#include +#include +#include #include #include "spi-pxa2xx.h" +struct device; + static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data, bool error) { diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index e11a613bc340..6d2efdb0e95f 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -6,9 +6,15 @@ * Copyright (C) 2016, 2021 Intel Corporation */ #include +#include +#include #include #include #include +#include +#include +#include +#include #include #include diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 82633682b581..cc0e54f8d2c3 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -5,24 +5,28 @@ */ #include +#include #include +#include #include #include #include #include #include -#include #include #include #include +#include #include -#include -#include +#include +#include #include +#include #include #include #include #include +#include #include diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index 08296729ea80..f1097c96c50f 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -8,8 +8,7 @@ #define SPI_PXA2XX_H #include -#include -#include +#include #include #include From 513525e99898a722b365ceda6c5a2e4c83adda89 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 17 Apr 2024 13:54:33 +0300 Subject: [PATCH 6/9] spi: pxa2xx: Drop struct pxa2xx_spi_chip No more users. Signed-off-by: Andy Shevchenko Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240417110334.2671228-7-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx-dma.c | 9 ++------- drivers/spi/spi-pxa2xx.c | 25 ------------------------- drivers/spi/spi-pxa2xx.h | 14 -------------- 3 files changed, 2 insertions(+), 46 deletions(-) diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c index 751cb0f77b62..d77279c3acd8 100644 --- a/drivers/spi/spi-pxa2xx-dma.c +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -231,16 +231,11 @@ int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, u8 bits_per_word, u32 *burst_code, u32 *threshold) { - struct pxa2xx_spi_chip *chip_info = spi->controller_data; struct driver_data *drv_data = spi_controller_get_devdata(spi->controller); u32 dma_burst_size = drv_data->controller_info->dma_burst_size; - /* - * If the DMA burst size is given in chip_info we use that, - * otherwise we use the default. Also we use the default FIFO - * thresholds for now. - */ - *burst_code = chip_info ? chip_info->dma_burst_size : dma_burst_size; + /* We use the default the DMA burst size and FIFO thresholds for now */ + *burst_code = dma_burst_size; *threshold = SSCR1_RxTresh(RX_THRESH_DFLT) | SSCR1_TxTresh(TX_THRESH_DFLT); diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index cc0e54f8d2c3..00aa33c937bf 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1154,7 +1154,6 @@ static int pxa2xx_spi_unprepare_transfer(struct spi_controller *controller) static int setup(struct spi_device *spi) { - struct pxa2xx_spi_chip *chip_info; struct chip_data *chip; const struct lpss_config *config; struct driver_data *drv_data = @@ -1218,25 +1217,6 @@ static int setup(struct spi_device *spi) chip->timeout = TIMOUT_DFLT; } - /* - * Protocol drivers may change the chip settings, so... - * if chip_info exists, use it. - */ - chip_info = spi->controller_data; - - /* chip_info isn't always needed */ - if (chip_info) { - if (chip_info->timeout) - chip->timeout = chip_info->timeout; - if (chip_info->tx_threshold) - tx_thres = chip_info->tx_threshold; - if (chip_info->tx_hi_threshold) - tx_hi_thres = chip_info->tx_hi_threshold; - if (chip_info->rx_threshold) - rx_thres = chip_info->rx_threshold; - chip->dma_threshold = 0; - } - chip->cr1 = 0; if (spi_controller_is_target(drv_data->controller)) { chip->cr1 |= SSCR1_SCFR; @@ -1256,11 +1236,6 @@ static int setup(struct spi_device *spi) chip->lpss_tx_threshold = tx_thres; } - /* - * Set DMA burst and threshold outside of chip_info path so that if - * chip_info goes away after setting chip->enable_dma, the burst and - * threshold can still respond to changes in bits_per_word. - */ if (chip->enable_dma) { /* Set up legal burst and threshold for DMA */ if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi, diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index f1097c96c50f..ae9c99bc9f6c 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -35,20 +35,6 @@ struct pxa2xx_spi_controller { struct ssp_device ssp; }; -/* - * The controller specific data for SPI target devices - * (resides in spi_board_info.controller_data), - * copied to spi_device.platform_data ... mostly for - * DMA tuning. - */ -struct pxa2xx_spi_chip { - u8 tx_threshold; - u8 tx_hi_threshold; - u8 rx_threshold; - u8 dma_burst_size; - u32 timeout; -}; - struct spi_controller; struct spi_device; struct spi_transfer; From 5c5de36d04cd848587f21c0c872682476d5df8e5 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 17 Apr 2024 13:54:34 +0300 Subject: [PATCH 7/9] spi: pxa2xx: Remove DMA parameters from struct chip_data The DMA related fields are set once and never modified. It effectively repeats the content of the same fields in struct pxa2xx_spi_controller. With that, remove DMA parameters from struct chip_data. Signed-off-by: Andy Shevchenko Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240417110334.2671228-8-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx-dma.c | 22 ++------------------ drivers/spi/spi-pxa2xx.c | 40 +++++++----------------------------- drivers/spi/spi-pxa2xx.h | 8 -------- 3 files changed, 9 insertions(+), 61 deletions(-) diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c index d77279c3acd8..08cb6e96ac94 100644 --- a/drivers/spi/spi-pxa2xx-dma.c +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -68,8 +68,6 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data, enum dma_transfer_direction dir, struct spi_transfer *xfer) { - struct chip_data *chip = - spi_get_ctldata(drv_data->controller->cur_msg->spi); enum dma_slave_buswidth width; struct dma_slave_config cfg; struct dma_chan *chan; @@ -94,14 +92,14 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data, if (dir == DMA_MEM_TO_DEV) { cfg.dst_addr = drv_data->ssp->phys_base + SSDR; cfg.dst_addr_width = width; - cfg.dst_maxburst = chip->dma_burst_size; + cfg.dst_maxburst = drv_data->controller_info->dma_burst_size; sgt = &xfer->tx_sg; chan = drv_data->controller->dma_tx; } else { cfg.src_addr = drv_data->ssp->phys_base + SSDR; cfg.src_addr_width = width; - cfg.src_maxburst = chip->dma_burst_size; + cfg.src_maxburst = drv_data->controller_info->dma_burst_size; sgt = &xfer->rx_sg; chan = drv_data->controller->dma_rx; @@ -225,19 +223,3 @@ void pxa2xx_spi_dma_release(struct driver_data *drv_data) controller->dma_tx = NULL; } } - -int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, - struct spi_device *spi, - u8 bits_per_word, u32 *burst_code, - u32 *threshold) -{ - struct driver_data *drv_data = spi_controller_get_devdata(spi->controller); - u32 dma_burst_size = drv_data->controller_info->dma_burst_size; - - /* We use the default the DMA burst size and FIFO thresholds for now */ - *burst_code = dma_burst_size; - *threshold = SSCR1_RxTresh(RX_THRESH_DFLT) - | SSCR1_TxTresh(TX_THRESH_DFLT); - - return 0; -} diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 00aa33c937bf..3ba0f5816f7f 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -934,11 +934,11 @@ static bool pxa2xx_spi_can_dma(struct spi_controller *controller, struct spi_device *spi, struct spi_transfer *xfer) { - struct chip_data *chip = spi_get_ctldata(spi); + struct driver_data *drv_data = spi_controller_get_devdata(controller); - return chip->enable_dma && + return drv_data->controller_info->enable_dma && xfer->len <= MAX_DMA_LEN && - xfer->len >= chip->dma_burst_size; + xfer->len >= drv_data->controller_info->dma_burst_size; } static int pxa2xx_spi_transfer_one(struct spi_controller *controller, @@ -947,9 +947,8 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, { struct driver_data *drv_data = spi_controller_get_devdata(controller); struct chip_data *chip = spi_get_ctldata(spi); - u32 dma_thresh = chip->dma_threshold; - u32 dma_burst = chip->dma_burst_size; u32 change_mask = pxa2xx_spi_get_ssrc1_change_mask(drv_data); + u32 dma_thresh; u32 clk_div; u8 bits; u32 speed; @@ -959,7 +958,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, int dma_mapped; /* Check if we can DMA this transfer */ - if (transfer->len > MAX_DMA_LEN && chip->enable_dma) { + if (transfer->len > MAX_DMA_LEN && drv_data->controller_info->enable_dma) { /* Warn ... we force this to PIO mode */ dev_warn_ratelimited(&spi->dev, "DMA disabled for transfer length %u greater than %d\n", @@ -995,19 +994,8 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, drv_data->read = drv_data->rx ? u32_reader : null_reader; drv_data->write = drv_data->tx ? u32_writer : null_writer; } - /* - * If bits per word is changed in DMA mode, then must check - * the thresholds and burst also. - */ - if (chip->enable_dma) { - if (pxa2xx_spi_set_dma_burst_and_threshold(chip, - spi, - bits, &dma_burst, - &dma_thresh)) - dev_warn_ratelimited(&spi->dev, - "DMA burst size reduced to match bits_per_word\n"); - } + dma_thresh = SSCR1_RxTresh(RX_THRESH_DFLT) | SSCR1_TxTresh(TX_THRESH_DFLT); dma_mapped = controller->can_dma && controller->can_dma(controller, spi, transfer) && controller->cur_msg_mapped; @@ -1213,7 +1201,6 @@ static int setup(struct spi_device *spi) if (!chip) return -ENOMEM; - chip->enable_dma = drv_data->controller_info->enable_dma; chip->timeout = TIMOUT_DFLT; } @@ -1236,20 +1223,6 @@ static int setup(struct spi_device *spi) chip->lpss_tx_threshold = tx_thres; } - if (chip->enable_dma) { - /* Set up legal burst and threshold for DMA */ - if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi, - spi->bits_per_word, - &chip->dma_burst_size, - &chip->dma_threshold)) { - dev_warn(&spi->dev, - "in setup: DMA burst size reduced to match bits_per_word\n"); - } - dev_dbg(&spi->dev, - "in setup: DMA burst size set to %u\n", - chip->dma_burst_size); - } - switch (drv_data->ssp_type) { case QUARK_X1000_SSP: chip->threshold = (QUARK_X1000_SSCR1_RxTresh(rx_thres) @@ -1439,6 +1412,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) if (IS_ERR(platform_info)) return dev_err_probe(dev, PTR_ERR(platform_info), "missing platform data\n"); } + dev_dbg(dev, "DMA burst size set to %u\n", platform_info->dma_burst_size); ssp = pxa_ssp_request(pdev->id, pdev->name); if (!ssp) diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index ae9c99bc9f6c..10294ef209d9 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -79,9 +79,6 @@ struct chip_data { u32 cr1; u32 dds_rate; u32 timeout; - u8 enable_dma; - u32 dma_burst_size; - u32 dma_threshold; u32 threshold; u16 lpss_rx_threshold; u16 lpss_tx_threshold; @@ -142,10 +139,5 @@ extern void pxa2xx_spi_dma_start(struct driver_data *drv_data); extern void pxa2xx_spi_dma_stop(struct driver_data *drv_data); extern int pxa2xx_spi_dma_setup(struct driver_data *drv_data); extern void pxa2xx_spi_dma_release(struct driver_data *drv_data); -extern int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, - struct spi_device *spi, - u8 bits_per_word, - u32 *burst_code, - u32 *threshold); #endif /* SPI_PXA2XX_H */ From 35bf074b1d4b252d04540acc7256e4ebee5b2dd5 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 17 Apr 2024 13:54:35 +0300 Subject: [PATCH 8/9] spi: pxa2xx: Remove timeout field from struct chip_data The timeout field is used only once and assigned to a predefined constant. Replace all that by using the constant directly. Signed-off-by: Andy Shevchenko Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240417110334.2671228-9-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 4 +--- drivers/spi/spi-pxa2xx.h | 1 - 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 3ba0f5816f7f..030afb17e606 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1058,7 +1058,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, pxa_ssp_disable(drv_data->ssp); if (!pxa25x_ssp_comp(drv_data)) - pxa2xx_spi_write(drv_data, SSTO, chip->timeout); + pxa2xx_spi_write(drv_data, SSTO, TIMOUT_DFLT); /* First set CR1 without interrupt and service enables */ pxa2xx_spi_update(drv_data, SSCR1, change_mask, cr1); @@ -1200,8 +1200,6 @@ static int setup(struct spi_device *spi) chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); if (!chip) return -ENOMEM; - - chip->timeout = TIMOUT_DFLT; } chip->cr1 = 0; diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index 10294ef209d9..5f741bb30240 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -78,7 +78,6 @@ struct driver_data { struct chip_data { u32 cr1; u32 dds_rate; - u32 timeout; u32 threshold; u16 lpss_rx_threshold; u16 lpss_tx_threshold; From b5ec3986da5d928e4fd9ed24b5d367c4b420f1d4 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 17 Apr 2024 13:54:36 +0300 Subject: [PATCH 9/9] spi: pxa2xx: Don't provide struct chip_data for others Now the struct chip_data is local to spi-pxa2xx.c, move its definition to the C file. This will slightly speed up a build and also hide badly named data type (too generic). Signed-off-by: Andy Shevchenko Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240417110334.2671228-10-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 8 ++++++++ drivers/spi/spi-pxa2xx.h | 8 -------- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 030afb17e606..efe76d0c21bb 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -66,6 +66,14 @@ MODULE_ALIAS("platform:pxa2xx-spi"); | CE4100_SSCR1_RFT | CE4100_SSCR1_TFT | SSCR1_MWDS \ | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) +struct chip_data { + u32 cr1; + u32 dds_rate; + u32 threshold; + u16 lpss_rx_threshold; + u16 lpss_tx_threshold; +}; + #define LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24) #define LPSS_CS_CONTROL_SW_MODE BIT(0) #define LPSS_CS_CONTROL_CS_HIGH BIT(1) diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index 5f741bb30240..93e1e471e1c6 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -75,14 +75,6 @@ struct driver_data { struct gpio_desc *gpiod_ready; }; -struct chip_data { - u32 cr1; - u32 dds_rate; - u32 threshold; - u16 lpss_rx_threshold; - u16 lpss_tx_threshold; -}; - static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data, u32 reg) { return pxa_ssp_read_reg(drv_data->ssp, reg);