From 18783f5cf350a65bc2082dd234f11b1a83d083af Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 13 Dec 2023 18:18:47 -0300 Subject: [PATCH] arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector description The USB connector should not be placed under the dwc3 node. Move the USB connector out of the SoC level and use port to describe the connection to the dwc3 controller. This fixes the following dt-schema warning: imx8mp-tqma8mpql-mba8mpxl.dtb: usb@38100000: Unevaluated properties are not allowed ('connector' was unexpected) from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml# Signed-off-by: Fabio Estevam Reviewed-by: Alexander Stein Tested-by: Alexander Stein Signed-off-by: Shawn Guo --- .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 26 ++++++++++++++----- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 4653daefae49..a2d5d19b2de0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -56,6 +56,21 @@ clock-frequency = <25000000>; }; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "X29"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon0>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + fan0: pwm-fan { compatible = "pwm-fan"; pinctrl-names = "default"; @@ -626,13 +641,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - label = "X29"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon0>; - id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; };