Code cleanup:

A substantial code cleanup from Wolfram affects many drivers: - Removed dev_err() in case of timeout during i2c transfers, as timeouts are not considered errors and should not be treated as such. - For the same reason, 'timeout' variables have been renamed to 'time_left'. Other cleanups: - The viperboard driver now omits the "owner = THIS_MODULE" assignment. - Finally, we have eliminated the last remnants of I2C_CLASS_SPD: support for class-based devices has been completely removed from the mux-gpio driver. - In the ocore devices, a more standard use of ioport_map() for 8-bit I/O read/write operations has been implemented. - The mpc driver will be among the first i2c drivers and one of the first in the kernel to use the __free auto cleanup routine. - The designware driver now uses MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() for better consistency with the ID table. - Added prefixes to the octeon register macros. - Fixed some checkpatch errors in the newly created i2c-viai2c-common.c file. Code refactoring: - The riic driver has refactored read/write operations to more flexibly support new platforms, laying the foundation for new SoC peculiarities. - In the i801 driver, a notifier callback has been created for muxed child segments. - The lpi2c driver now sets a clock rate during probe instead of continuously calling clk_get_rate(). - Improvements in the clock divisor logic to accommodate other clock frequencies. - Combined some common functionalities during initialization for the wmt driver and separated others that can be independently used by different drivers. Now, all the common functionalities are grouped in the i2c-viai2c-common.c file. - Improved the clock stretching mechanism in the newly created i2c-viai2c-common.c file, inherited from the previous i2c-wmt.c. Features added: - The octeon driver now includes watchdog timeout handling. - Added high-speed support for the octeon driver. Added support for: - R9A09G057 SoC in the riic driver. - Rapids-D I2C controller in the designware driver. - Cadence driver now also supports RISC-V architectures. - Added support to the WMT device as a separate driver using the newly created i2c-viai2c-common.c functionalities. - Added support for the Zhaoxin I2C controller. Some improvements in the bindings: - The pnx driver is converted to dtschema. - Added documentation for the Qualcomm SC8280XP. -----BEGIN PGP SIGNATURE----- iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZj/GzxYcYW5kaS5zaHl0 aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uJQgA/3DBT5R6OYbIg1Ky4u9A9hwwmqqN EnNcygEovf1BpMiSAQC7Nrmv/CKUkmk0YNV9Ho94XYjFxIHqgKwUwySsocrFAQ== =MW8c -----END PGP SIGNATURE----- Merge tag 'i2c-host-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow Code cleanup: A substantial code cleanup from Wolfram affects many drivers: - Removed dev_err() in case of timeout during i2c transfers, as timeouts are not considered errors and should not be treated as such. - For the same reason, 'timeout' variables have been renamed to 'time_left'. Other cleanups: - The viperboard driver now omits the "owner = THIS_MODULE" assignment. - Finally, we have eliminated the last remnants of I2C_CLASS_SPD: support for class-based devices has been completely removed from the mux-gpio driver. - In the ocore devices, a more standard use of ioport_map() for 8-bit I/O read/write operations has been implemented. - The mpc driver will be among the first i2c drivers and one of the first in the kernel to use the __free auto cleanup routine. - The designware driver now uses MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() for better consistency with the ID table. - Added prefixes to the octeon register macros. - Fixed some checkpatch errors in the newly created i2c-viai2c-common.c file. Code refactoring: - The riic driver has refactored read/write operations to more flexibly support new platforms, laying the foundation for new SoC peculiarities. - In the i801 driver, a notifier callback has been created for muxed child segments. - The lpi2c driver now sets a clock rate during probe instead of continuously calling clk_get_rate(). - Improvements in the clock divisor logic to accommodate other clock frequencies. - Combined some common functionalities during initialization for the wmt driver and separated others that can be independently used by different drivers. Now, all the common functionalities are grouped in the i2c-viai2c-common.c file. - Improved the clock stretching mechanism in the newly created i2c-viai2c-common.c file, inherited from the previous i2c-wmt.c. Features added: - The octeon driver now includes watchdog timeout handling. - Added high-speed support for the octeon driver. Added support for: - R9A09G057 SoC in the riic driver. - Rapids-D I2C controller in the designware driver. - Cadence driver now also supports RISC-V architectures. - Added support to the WMT device as a separate driver using the newly created i2c-viai2c-common.c functionalities. - Added support for the Zhaoxin I2C controller. Some improvements in the bindings: - The pnx driver is converted to dtschema. - Added documentation for the Qualcomm SC8280XP.
2024-05-13 15:56:14 +02:00 · 2024-05-13 15:56:14 +02:00 · 0e9ee7dd74
commit 0e9ee7dd74
parent 10316dcc4f 61e05bad82
55 changed files with 1295 additions and 733 deletions
--- a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
@ -1,34 +0,0 @@
-* NXP PNX I2C Controller
-
-Required properties:
-
- - reg: Offset and length of the register set for the device
- - compatible: should be "nxp,pnx-i2c"
- - interrupts: configure one interrupt line
- - #address-cells: always 1 (for i2c addresses)
- - #size-cells: always 0
-
-Optional properties:
-
- - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
-
-Examples:
-
-	i2c1: i2c@400a0000 {
-		compatible = "nxp,pnx-i2c";
-		reg = <0x400a0000 0x100>;
-		interrupt-parent = <&mic>;
-		interrupts = <51 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	i2c2: i2c@400a8000 {
-		compatible = "nxp,pnx-i2c";
-		reg = <0x400a8000 0x100>;
-		interrupt-parent = <&mic>;
-		interrupts = <50 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <100000>;
-	};
--- a/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml
@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nxp,pnx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PNX I2C Controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: nxp,pnx-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@400a0000 {
+        compatible = "nxp,pnx-i2c";
+        reg = <0x400a0000 0x100>;
+        interrupt-parent = <&mic>;
+        interrupts = <51 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@ -26,6 +26,7 @@ properties:
      - items:
          - enum:
              - qcom,sc7280-cci
+              - qcom,sc8280xp-cci
              - qcom,sdm845-cci
              - qcom,sm6350-cci
              - qcom,sm8250-cci
@ -176,6 +177,24 @@ allOf:
            - const: cci
            - const: cci_src

+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-cci
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+
 additionalProperties: false

 examples:
--- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@ -15,14 +15,17 @@ allOf:

 properties:
  compatible:
-    items:
-      - enum:
-          - renesas,riic-r7s72100   # RZ/A1H
-          - renesas,riic-r7s9210    # RZ/A2M
-          - renesas,riic-r9a07g043  # RZ/G2UL and RZ/Five
-          - renesas,riic-r9a07g044  # RZ/G2{L,LC}
-          - renesas,riic-r9a07g054  # RZ/V2L
-      - const: renesas,riic-rz      # RZ/A or RZ/G2L
+    oneOf:
+      - items:
+          - enum:
+              - renesas,riic-r7s72100   # RZ/A1H
+              - renesas,riic-r7s9210    # RZ/A2M
+              - renesas,riic-r9a07g043  # RZ/G2UL and RZ/Five
+              - renesas,riic-r9a07g044  # RZ/G2{L,LC}
+              - renesas,riic-r9a07g054  # RZ/V2L
+          - const: renesas,riic-rz      # RZ/A or RZ/G2L
+
+      - const: renesas,riic-r9a09g057   # RZ/V2H(P)

  reg:
    maxItems: 1
--- a/12
+++ b/12
@ -2320,7 +2320,7 @@ M:	Vladimir Zapolskiy <vz@mleia.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://github.com/vzapolskiy/linux-lpc32xx.git
-F:	Documentation/devicetree/bindings/i2c/i2c-pnx.txt
+F:	Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml
 F:	arch/arm/boot/dts/nxp/lpc/lpc32*
 F:	arch/arm/mach-lpc32xx/
 F:	drivers/i2c/busses/i2c-pnx.c
@ -3017,7 +3017,7 @@ S:	Orphan
 F:	Documentation/devicetree/bindings/i2c/i2c-wmt.txt
 F:	arch/arm/mach-vt8500/
 F:	drivers/clocksource/timer-vt8500.c
-F:	drivers/i2c/busses/i2c-wmt.c
+F:	drivers/i2c/busses/i2c-viai2c-wmt.c
 F:	drivers/mmc/host/wmt-sdmmc.c
 F:	drivers/pwm/pwm-vt8500.c
 F:	drivers/rtc/rtc-vt8500.c
@ -10258,6 +10258,14 @@ L:	linux-i2c@vger.kernel.org
 F:	Documentation/i2c/busses/i2c-ismt.rst
 F:	drivers/i2c/busses/i2c-ismt.c

+I2C/SMBUS ZHAOXIN DRIVER
+M:	Hans Hu <hanshu@zhaoxin.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+W:	https://www.zhaoxin.com
+F:	drivers/i2c/busses/i2c-viai2c-common.c
+F:	drivers/i2c/busses/i2c-viai2c-zhaoxin.c
+
 I2C/SMBUS STUB DRIVER
 M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@ -18,7 +18,7 @@ config I2C_CCGX_UCSI

 config I2C_ALI1535
 	tristate "ALI 1535"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
@ -30,7 +30,7 @@ config I2C_ALI1535

 config I2C_ALI1563
 	tristate "ALI 1563"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
@ -42,7 +42,7 @@ config I2C_ALI1563

 config I2C_ALI15X3
 	tristate "ALI 15x3"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
@ -52,7 +52,7 @@ config I2C_ALI15X3

 config I2C_AMD756
 	tristate "AMD 756/766/768/8111 and nVidia nForce"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the AMD
 	  756/766/768 mainboard I2C interfaces.  The driver also includes
@ -77,7 +77,7 @@ config I2C_AMD756_S4882

 config I2C_AMD8111
 	tristate "AMD 8111"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  second (SMBus 2.0) AMD 8111 mainboard I2C interface.
@ -107,7 +107,7 @@ config I2C_HIX5HD2

 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select P2SB if X86
 	select CHECK_SIGNATURE if X86 && DMI
 	select I2C_SMBUS
@ -163,9 +163,17 @@ config I2C_I801
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

+config I2C_I801_MUX
+	def_bool I2C_I801
+	depends on DMI && I2C_MUX_GPIO
+	depends on !(I2C_I801=y && I2C_MUX=m)
+	help
+	  Optional support for multiplexed SMBUS on certain systems with
+	  more than 8 memory slots.
+
 config I2C_ISCH
 	tristate "Intel SCH SMBus 1.0"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select LPC_SCH
 	help
 	  Say Y here if you want to use SMBus controller on the Intel SCH
@ -186,7 +194,7 @@ config I2C_ISMT

 config I2C_PIIX4
 	tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
@ -232,7 +240,7 @@ config I2C_CHT_WC

 config I2C_NFORCE2
 	tristate "Nvidia nForce2, nForce3 and nForce4"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the Nvidia
 	  nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
@ -265,7 +273,7 @@ config I2C_NVIDIA_GPU

 config I2C_SIS5595
 	tristate "SiS 5595"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  SiS5595 SMBus (a subset of I2C) interface.
@ -275,7 +283,7 @@ config I2C_SIS5595

 config I2C_SIS630
 	tristate "SiS 630/730/964"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
@ -285,7 +293,7 @@ config I2C_SIS630

 config I2C_SIS96X
 	tristate "SiS 96x"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SiS
 	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following
@ -303,7 +311,7 @@ config I2C_SIS96X

 config I2C_VIA
 	tristate "VIA VT82C586B"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select I2C_ALGOBIT
 	help
 	  If you say yes to this option, support will be included for the VIA
@ -314,7 +322,7 @@ config I2C_VIA

 config I2C_VIAPRO
 	tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the VIA
 	  VT82C596 and later SMBus interface.  Specifically, the following
@ -336,6 +344,16 @@ config I2C_VIAPRO

 if ACPI

+config I2C_ZHAOXIN
+	tristate "Zhaoxin I2C Interface"
+	depends on PCI || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  ZHAOXIN I2C interface
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-zhaoxin.
+
 comment "ACPI drivers"

 config I2C_SCMI
@ -500,7 +518,7 @@ config I2C_BRCMSTB

 config I2C_CADENCE
 	tristate "Cadence I2C Controller"
-	depends on ARCH_ZYNQ || ARM64 || XTENSA || COMPILE_TEST
+	depends on ARCH_ZYNQ || ARM64 || XTENSA || RISCV || COMPILE_TEST
 	help
 	  Say yes here to select Cadence I2C Host Controller. This controller is
 	  e.g. used by Xilinx Zynq.
@ -1397,6 +1415,7 @@ config I2C_ICY
 config I2C_MLXCPLD
 	tristate "Mellanox I2C driver"
 	depends on X86_64 || (ARM64 && ACPI) || COMPILE_TEST
+	depends on HAS_IOPORT
 	help
 	  This exposes the Mellanox platform I2C busses to the linux I2C layer
 	  for X86 and ARM64/ACPI based systems.
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@ -29,6 +29,8 @@ obj-$(CONFIG_I2C_SIS630)	+= i2c-sis630.o
 obj-$(CONFIG_I2C_SIS96X)	+= i2c-sis96x.o
 obj-$(CONFIG_I2C_VIA)		+= i2c-via.o
 obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+i2c-zhaoxin-objs := i2c-viai2c-zhaoxin.o i2c-viai2c-common.o
+obj-$(CONFIG_I2C_ZHAOXIN)	+= i2c-zhaoxin.o

 # Mac SMBus host controller drivers
 obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
@ -118,6 +120,7 @@ obj-$(CONFIG_I2C_TEGRA_BPMP)	+= i2c-tegra-bpmp.o
 obj-$(CONFIG_I2C_UNIPHIER)	+= i2c-uniphier.o
 obj-$(CONFIG_I2C_UNIPHIER_F)	+= i2c-uniphier-f.o
 obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
+i2c-wmt-objs := i2c-viai2c-wmt.o i2c-viai2c-common.o
 obj-$(CONFIG_I2C_WMT)		+= i2c-wmt.o
 i2c-octeon-objs := i2c-octeon-core.o i2c-octeon-platdrv.o
 obj-$(CONFIG_I2C_OCTEON)	+= i2c-octeon.o
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@ -285,10 +285,8 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 		 && (timeout++ < MAX_TIMEOUT));

 	/* If the SMBus is still busy, we give up */
-	if (timeout > MAX_TIMEOUT) {
+	if (timeout > MAX_TIMEOUT)
 		result = -ETIMEDOUT;
-		dev_err(&adap->dev, "SMBus Timeout!\n");
-	}

 	if (temp & ALI1535_STS_FAIL) {
 		result = -EIO;
@ -313,10 +311,8 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 	}

 	/* check to see if the "command complete" indication is set */
-	if (!(temp & ALI1535_STS_DONE)) {
+	if (!(temp & ALI1535_STS_DONE))
 		result = -ETIMEDOUT;
-		dev_err(&adap->dev, "Error: command never completed\n");
-	}

 	dev_dbg(&adap->dev, "Transaction (post): STS=%02x, TYP=%02x, "
 		"CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@ -99,7 +99,6 @@ static int ali1563_transaction(struct i2c_adapter *a, int size)
 		return 0;

 	if (!timeout) {
-		dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
 		/* Issue 'kill' to host controller */
 		outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2);
 		data = inb_p(SMB_HST_STS);
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@ -294,10 +294,8 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
 		 && (timeout++ < MAX_TIMEOUT));

 	/* If the SMBus is still busy, we give up */
-	if (timeout > MAX_TIMEOUT) {
+	if (timeout > MAX_TIMEOUT)
 		result = -ETIMEDOUT;
-		dev_err(&adap->dev, "SMBus Timeout!\n");
-	}

 	if (temp & ALI15X3_STS_TERM) {
 		result = -EIO;
--- a/drivers/i2c/busses/i2c-amd-mp2-plat.c
+++ b/drivers/i2c/busses/i2c-amd-mp2-plat.c
@ -97,17 +97,17 @@ static void i2c_amd_cmd_completion(struct amd_i2c_common *i2c_common)
 static int i2c_amd_check_cmd_completion(struct amd_i2c_dev *i2c_dev)
 {
 	struct amd_i2c_common *i2c_common = &i2c_dev->common;
-	unsigned long timeout;
+	unsigned long time_left;

-	timeout = wait_for_completion_timeout(&i2c_dev->cmd_complete,
-					      i2c_dev->adap.timeout);
+	time_left = wait_for_completion_timeout(&i2c_dev->cmd_complete,
+						i2c_dev->adap.timeout);

 	if ((i2c_common->reqcmd == i2c_read ||
 	     i2c_common->reqcmd == i2c_write) &&
 	    i2c_common->msg->len > 32)
 		i2c_amd_dma_unmap(i2c_common);

-	if (timeout == 0) {
+	if (time_left == 0) {
 		amd_mp2_rw_timeout(i2c_common);
 		return -ETIMEDOUT;
 	}
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@ -591,7 +591,6 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 					      dev->adapter.timeout);
 	if (time_left == 0) {
 		dev->transfer_status |= at91_twi_read(dev, AT91_TWI_SR);
-		dev_err(dev->dev, "controller timed out\n");
 		at91_init_twi_bus(dev);
 		ret = -ETIMEDOUT;
 		goto error;
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@ -811,8 +811,6 @@ static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c,
 	}

 	if (!time_left && !iproc_i2c->xfer_is_done) {
-		dev_err(iproc_i2c->device, "transaction timed out\n");
-
 		/* flush both TX/RX FIFOs */
 		val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT);
 		iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@ -370,7 +370,6 @@ static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 	if (!time_left) {
 		bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C,
 				   BCM2835_I2C_C_CLEAR);
-		dev_err(i2c_dev->dev, "i2c transfer timed out\n");
 		return -ETIMEDOUT;
 	}

--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@ -790,8 +790,6 @@ static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
 	time_left = wait_for_completion_timeout(&id->xfer_done, msg_timeout);
 	if (time_left == 0) {
 		cdns_i2c_master_reset(adap);
-		dev_err(id->adap.dev.parent,
-				"timeout waiting on completion\n");
 		return -ETIMEDOUT;
 	}

--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@ -489,7 +489,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 	time_left = wait_for_completion_timeout(&dev->cmd_complete,
 						dev->adapter.timeout);
 	if (!time_left) {
-		dev_err(dev->dev, "controller timed out\n");
 		i2c_recover_bus(adap);
 		dev->buf_len = 0;
 		return -ETIMEDOUT;
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@ -424,8 +424,6 @@ static struct pci_driver dw_i2c_driver = {
 };
 module_pci_driver(dw_i2c_driver);

-/* Work with hotplug and coldplug */
-MODULE_ALIAS("i2c_designware-pci");
 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
 MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
 MODULE_LICENSE("GPL");
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@ -46,6 +46,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "INT33C3", 0 },
 	{ "INT3432", 0 },
 	{ "INT3433", 0 },
+	{ "INTC10EF", 0 },
 	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
 	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
 	{ "AMD0010", ACCESS_INTR_MASK },
@ -479,8 +480,11 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 	RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL)
 };

-/* Work with hotplug and coldplug */
-MODULE_ALIAS("platform:i2c_designware");
+static const struct platform_device_id dw_i2c_platform_ids[] = {
+	{ "i2c_designware" },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, dw_i2c_platform_ids);

 static struct platform_driver dw_i2c_driver = {
 	.probe = dw_i2c_plat_probe,
@ -491,6 +495,7 @@ static struct platform_driver dw_i2c_driver = {
 		.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
 		.pm	= pm_ptr(&dw_i2c_dev_pm_ops),
 	},
+	.id_table = dw_i2c_platform_ids,
 };

 static int __init dw_i2c_init_driver(void)
--- a/drivers/i2c/busses/i2c-digicolor.c
+++ b/drivers/i2c/busses/i2c-digicolor.c
@ -213,7 +213,7 @@ out:
 static int dc_i2c_xfer_msg(struct dc_i2c *i2c, struct i2c_msg *msg, int first,
 			   int last)
 {
-	unsigned long timeout = msecs_to_jiffies(TIMEOUT_MS);
+	unsigned long time_left = msecs_to_jiffies(TIMEOUT_MS);
 	unsigned long flags;

 	spin_lock_irqsave(&i2c->lock, flags);
@ -227,9 +227,9 @@ static int dc_i2c_xfer_msg(struct dc_i2c *i2c, struct i2c_msg *msg, int first,
 	dc_i2c_start_msg(i2c, first);
 	spin_unlock_irqrestore(&i2c->lock, flags);

-	timeout = wait_for_completion_timeout(&i2c->done, timeout);
+	time_left = wait_for_completion_timeout(&i2c->done, time_left);
 	dc_i2c_set_irq(i2c, 0);
-	if (timeout == 0) {
+	if (time_left == 0) {
 		i2c->state = STATE_IDLE;
 		return -ETIMEDOUT;
 	}
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@ -763,7 +763,7 @@ static bool exynos5_i2c_poll_irqs_timeout(struct exynos5_i2c *i2c,
 static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
 			      struct i2c_msg *msgs, int stop)
 {
-	unsigned long timeout;
+	unsigned long time_left;
 	int ret;

 	i2c->msg = msgs;
@ -775,13 +775,13 @@ static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
 	exynos5_i2c_message_start(i2c, stop);

 	if (!i2c->atomic)
-		timeout = wait_for_completion_timeout(&i2c->msg_complete,
-						      EXYNOS5_I2C_TIMEOUT);
-	else
-		timeout = exynos5_i2c_poll_irqs_timeout(i2c,
+		time_left = wait_for_completion_timeout(&i2c->msg_complete,
 							EXYNOS5_I2C_TIMEOUT);
+	else
+		time_left = exynos5_i2c_poll_irqs_timeout(i2c,
+							  EXYNOS5_I2C_TIMEOUT);

-	if (timeout == 0)
+	if (time_left == 0)
 		ret = -ETIMEDOUT;
 	else
 		ret = i2c->state;
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@ -314,7 +314,7 @@ static void hix5hd2_i2c_message_start(struct hix5hd2_i2c_priv *priv, int stop)
 static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c_priv *priv,
 				struct i2c_msg *msgs, int stop)
 {
-	unsigned long timeout;
+	unsigned long time_left;
 	int ret;

 	priv->msg = msgs;
@ -327,9 +327,9 @@ static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c_priv *priv,
 	reinit_completion(&priv->msg_complete);
 	hix5hd2_i2c_message_start(priv, stop);

-	timeout = wait_for_completion_timeout(&priv->msg_complete,
-					      priv->adap.timeout);
-	if (timeout == 0) {
+	time_left = wait_for_completion_timeout(&priv->msg_complete,
+						priv->adap.timeout);
+	if (time_left == 0) {
 		priv->state = HIX5I2C_STAT_RW_ERR;
 		priv->err = -ETIMEDOUT;
 		dev_warn(priv->dev, "%s timeout=%d\n",
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@ -105,6 +105,7 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
+#include <linux/i2c-mux.h>
 #include <linux/i2c-smbus.h>
 #include <linux/acpi.h>
 #include <linux/io.h>
@ -119,7 +120,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/mutex.h>

-#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+#ifdef CONFIG_I2C_I801_MUX
 #include <linux/gpio/machine.h>
 #include <linux/platform_data/i2c-mux-gpio.h>
 #endif
@ -263,7 +264,6 @@ struct i801_mux_config {
 	char *gpio_chip;
 	unsigned values[3];
 	int n_values;
-	unsigned classes[3];
 	unsigned gpios[2];		/* Relative to gpio_chip->base */
 	int n_gpios;
 };
@ -288,9 +288,10 @@ struct i801_priv {
 	int len;
 	u8 *data;

-#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+#ifdef CONFIG_I2C_I801_MUX
 	struct platform_device *mux_pdev;
 	struct gpiod_lookup_table *lookup;
+	struct notifier_block mux_notifier_block;
 #endif
 	struct platform_device *tco_pdev;

@ -398,9 +399,7 @@ static int i801_check_post(struct i801_priv *priv, int status)
 	 * If the SMBus is still busy, we give up
 	 */
 	if (unlikely(status < 0)) {
-		dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
 		/* try to stop the current command */
-		dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
 		outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
 		usleep_range(1000, 2000);
 		outb_p(0, SMBHSTCNT(priv));
@ -409,7 +408,7 @@ static int i801_check_post(struct i801_priv *priv, int status)
 		status = inb_p(SMBHSTSTS(priv));
 		if ((status & SMBHSTSTS_HOST_BUSY) ||
 		    !(status & SMBHSTSTS_FAILED))
-			dev_err(&priv->pci_dev->dev,
+			dev_dbg(&priv->pci_dev->dev,
 				"Failed terminating the transaction\n");
 		return -ETIMEDOUT;
 	}
@ -1059,7 +1058,7 @@ static const struct pci_device_id i801_ids[] = {
 MODULE_DEVICE_TABLE(pci, i801_ids);

 #if defined CONFIG_X86 && defined CONFIG_DMI
-static unsigned char apanel_addr;
+static unsigned char apanel_addr __ro_after_init;

 /* Scan the system ROM for the signature "FJKEYINF" */
 static __init const void __iomem *bios_signature(const void __iomem *bios)
@ -1298,7 +1297,7 @@ static void i801_probe_optional_slaves(struct i801_priv *priv)
 		register_dell_lis3lv02d_i2c_device(priv);

 	/* Instantiate SPD EEPROMs unless the SMBus is multiplexed */
-#if IS_ENABLED(CONFIG_I2C_MUX_GPIO)
+#ifdef CONFIG_I2C_I801_MUX
 	if (!priv->mux_pdev)
 #endif
 		i2c_register_spd(&priv->adapter);
@ -1308,12 +1307,11 @@ static void __init input_apanel_init(void) {}
 static void i801_probe_optional_slaves(struct i801_priv *priv) {}
 #endif	/* CONFIG_X86 && CONFIG_DMI */

-#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+#ifdef CONFIG_I2C_I801_MUX
 static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
 	.gpio_chip = "gpio_ich",
 	.values = { 0x02, 0x03 },
 	.n_values = 2,
-	.classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
 	.gpios = { 52, 53 },
 	.n_gpios = 2,
 };
@ -1322,7 +1320,6 @@ static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
 	.gpio_chip = "gpio_ich",
 	.values = { 0x02, 0x03, 0x01 },
 	.n_values = 3,
-	.classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
 	.gpios = { 52, 53 },
 	.n_gpios = 2,
 };
@ -1394,6 +1391,23 @@ static const struct dmi_system_id mux_dmi_table[] = {
 	{ }
 };

+static int i801_notifier_call(struct notifier_block *nb, unsigned long action,
+			      void *data)
+{
+	struct i801_priv *priv = container_of(nb, struct i801_priv, mux_notifier_block);
+	struct device *dev = data;
+
+	if (action != BUS_NOTIFY_ADD_DEVICE ||
+	    dev->type != &i2c_adapter_type ||
+	    i2c_root_adapter(dev) != &priv->adapter)
+		return NOTIFY_DONE;
+
+	/* Call i2c_register_spd for muxed child segments */
+	i2c_register_spd(to_i2c_adapter(dev));
+
+	return NOTIFY_OK;
+}
+
 /* Setup multiplexing if needed */
 static void i801_add_mux(struct i801_priv *priv)
 {
@ -1415,7 +1429,6 @@ static void i801_add_mux(struct i801_priv *priv)
 	gpio_data.parent = priv->adapter.nr;
 	gpio_data.values = mux_config->values;
 	gpio_data.n_values = mux_config->n_values;
-	gpio_data.classes = mux_config->classes;
 	gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;

 	/* Register GPIO descriptor lookup table */
@ -1430,6 +1443,9 @@ static void i801_add_mux(struct i801_priv *priv)
 					       mux_config->gpios[i], "mux", 0);
 	gpiod_add_lookup_table(lookup);

+	priv->mux_notifier_block.notifier_call = i801_notifier_call;
+	if (bus_register_notifier(&i2c_bus_type, &priv->mux_notifier_block))
+		return;
 	/*
 	 * Register the mux device, we use PLATFORM_DEVID_NONE here
 	 * because since we are referring to the GPIO chip by name we are
@ -1451,6 +1467,7 @@ static void i801_add_mux(struct i801_priv *priv)

 static void i801_del_mux(struct i801_priv *priv)
 {
+	bus_unregister_notifier(&i2c_bus_type, &priv->mux_notifier_block);
 	platform_device_unregister(priv->mux_pdev);
 	gpiod_remove_lookup_table(priv->lookup);
 }
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@ -1124,11 +1124,8 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 						      IMG_I2C_TIMEOUT);
 		del_timer_sync(&i2c->check_timer);

-		if (time_left == 0) {
-			dev_err(adap->dev.parent, "i2c transfer timed out\n");
+		if (time_left == 0)
 			i2c->msg_status = -ETIMEDOUT;
-			break;
-		}

 		if (i2c->msg_status)
 			break;
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@ -99,6 +99,7 @@ struct lpi2c_imx_struct {
 	__u8			*rx_buf;
 	__u8			*tx_buf;
 	struct completion	complete;
+	unsigned long		rate_per;
 	unsigned int		msglen;
 	unsigned int		delivered;
 	unsigned int		block_data;
@ -212,9 +213,7 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)

 	lpi2c_imx_set_mode(lpi2c_imx);

-	clk_rate = clk_get_rate(lpi2c_imx->clks[0].clk);
-	if (!clk_rate)
-		return -EINVAL;
+	clk_rate = lpi2c_imx->rate_per;

 	if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
 		filt = 0;
@ -308,11 +307,11 @@ static int lpi2c_imx_master_disable(struct lpi2c_imx_struct *lpi2c_imx)

 static int lpi2c_imx_msg_complete(struct lpi2c_imx_struct *lpi2c_imx)
 {
-	unsigned long timeout;
+	unsigned long time_left;

-	timeout = wait_for_completion_timeout(&lpi2c_imx->complete, HZ);
+	time_left = wait_for_completion_timeout(&lpi2c_imx->complete, HZ);

-	return timeout ? 0 : -ETIMEDOUT;
+	return time_left ? 0 : -ETIMEDOUT;
 }

 static int lpi2c_imx_txfifo_empty(struct lpi2c_imx_struct *lpi2c_imx)
@ -611,6 +610,20 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;

+	/*
+	 * Lock the parent clock rate to avoid getting parent clock upon
+	 * each transfer
+	 */
+	ret = devm_clk_rate_exclusive_get(&pdev->dev, lpi2c_imx->clks[0].clk);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "can't lock I2C peripheral clock rate\n");
+
+	lpi2c_imx->rate_per = clk_get_rate(lpi2c_imx->clks[0].clk);
+	if (!lpi2c_imx->rate_per)
+		return dev_err_probe(&pdev->dev, -EINVAL,
+				     "can't get I2C peripheral clock rate\n");
+
 	pm_runtime_set_autosuspend_delay(&pdev->dev, I2C_PM_TIMEOUT);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_get_noresume(&pdev->dev);
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@ -623,7 +623,6 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 		dma_unmap_single(dev, dma_addr, dma_size, dma_direction);

 	if (unlikely(!time_left)) {
-		dev_err(dev, "completion wait timed out\n");
 		ret = -ETIMEDOUT;
 		goto out;
 	}
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@ -565,7 +565,7 @@ static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c,
 				       int idx)
 {
 	int ret = 0;
-	long timeout;
+	unsigned long time_left;
 	int wait_time = JZ4780_I2C_TIMEOUT * (len + 5);
 	unsigned short tmp;
 	unsigned long flags;
@ -600,10 +600,10 @@ static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c,

 	spin_unlock_irqrestore(&i2c->lock, flags);

-	timeout = wait_for_completion_timeout(&i2c->trans_waitq,
-					      msecs_to_jiffies(wait_time));
+	time_left = wait_for_completion_timeout(&i2c->trans_waitq,
+						msecs_to_jiffies(wait_time));

-	if (!timeout) {
+	if (!time_left) {
 		dev_err(&i2c->adap.dev, "irq read timeout\n");
 		dev_dbg(&i2c->adap.dev, "send cmd count:%d  %d\n",
 			i2c->cmd, i2c->cmd_buf[i2c->cmd]);
@ -627,7 +627,7 @@ static inline int jz4780_i2c_xfer_write(struct jz4780_i2c *i2c,
 {
 	int ret = 0;
 	int wait_time = JZ4780_I2C_TIMEOUT * (len + 5);
-	long timeout;
+	unsigned long time_left;
 	unsigned short tmp;
 	unsigned long flags;

@ -655,14 +655,14 @@ static inline int jz4780_i2c_xfer_write(struct jz4780_i2c *i2c,

 	spin_unlock_irqrestore(&i2c->lock, flags);

-	timeout = wait_for_completion_timeout(&i2c->trans_waitq,
-					      msecs_to_jiffies(wait_time));
-	if (timeout && !i2c->stop_hold) {
+	time_left = wait_for_completion_timeout(&i2c->trans_waitq,
+						msecs_to_jiffies(wait_time));
+	if (time_left && !i2c->stop_hold) {
 		unsigned short i2c_sta;
 		int write_in_process;

-		timeout = JZ4780_I2C_TIMEOUT * 100;
-		for (; timeout > 0; timeout--) {
+		time_left = JZ4780_I2C_TIMEOUT * 100;
+		for (; time_left > 0; time_left--) {
 			i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);

 			write_in_process = (i2c_sta & JZ4780_I2C_STA_MSTACT) ||
@ -673,7 +673,7 @@ static inline int jz4780_i2c_xfer_write(struct jz4780_i2c *i2c,
 		}
 	}

-	if (!timeout) {
+	if (!time_left) {
 		dev_err(&i2c->adap.dev, "write wait timeout\n");
 		ret = -EIO;
 	}
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@ -304,13 +304,12 @@ static void mpc_i2c_setup_512x(struct device_node *node,
 					 struct mpc_i2c *i2c,
 					 u32 clock)
 {
-	struct device_node *node_ctrl;
 	void __iomem *ctrl;
 	u32 idx;

 	/* Enable I2C interrupts for mpc5121 */
-	node_ctrl = of_find_compatible_node(NULL, NULL,
-					    "fsl,mpc5121-i2c-ctrl");
+	struct device_node *node_ctrl __free(device_node) =
+		of_find_compatible_node(NULL, NULL, "fsl,mpc5121-i2c-ctrl");
 	if (node_ctrl) {
 		ctrl = of_iomap(node_ctrl, 0);
 		if (ctrl) {
@ -321,7 +320,6 @@ static void mpc_i2c_setup_512x(struct device_node *node,
 			setbits32(ctrl, 1 << (24 + idx * 2));
 			iounmap(ctrl);
 		}
-		of_node_put(node_ctrl);
 	}

 	/* The clock setup for the 52xx works also fine for the 512x */
@ -358,11 +356,11 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {

 static u32 mpc_i2c_get_sec_cfg_8xxx(void)
 {
-	struct device_node *node;
 	u32 __iomem *reg;
 	u32 val = 0;

-	node = of_find_node_by_name(NULL, "global-utilities");
+	struct device_node *node __free(device_node) =
+		of_find_node_by_name(NULL, "global-utilities");
 	if (node) {
 		const u32 *prop = of_get_property(node, "reg", NULL);
 		if (prop) {
@ -383,7 +381,6 @@ static u32 mpc_i2c_get_sec_cfg_8xxx(void)
 			iounmap(reg);
 		}
 	}
-	of_node_put(node);

 	return val;
 }
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@ -542,12 +542,9 @@ static int read_i2c(struct nmk_i2c_dev *priv, u16 flags)

 	xfer_done = nmk_i2c_wait_xfer_done(priv);

-	if (!xfer_done) {
-		/* Controller timed out */
-		dev_err(&priv->adev->dev, "read from slave 0x%x timed out\n",
-			priv->cli.slave_adr);
+	if (!xfer_done)
 		status = -ETIMEDOUT;
-	}
+
 	return status;
 }

--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@ -32,7 +32,6 @@
 */
 struct ocores_i2c {
 	void __iomem *base;
-	int iobase;
 	u32 reg_shift;
 	u32 reg_io_width;
 	unsigned long flags;
@ -136,16 +135,6 @@ static inline u8 oc_getreg_32be(struct ocores_i2c *i2c, int reg)
 	return ioread32be(i2c->base + (reg << i2c->reg_shift));
 }

-static void oc_setreg_io_8(struct ocores_i2c *i2c, int reg, u8 value)
-{
-	outb(value, i2c->iobase + reg);
-}
-
-static inline u8 oc_getreg_io_8(struct ocores_i2c *i2c, int reg)
-{
-	return inb(i2c->iobase + reg);
-}
-
 static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
 {
 	i2c->setreg(i2c, reg, value);
@ -618,15 +607,19 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 		res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 		if (!res)
 			return -EINVAL;
-		i2c->iobase = res->start;
 		if (!devm_request_region(&pdev->dev, res->start,
 					 resource_size(res),
 					 pdev->name)) {
 			dev_err(&pdev->dev, "Can't get I/O resource.\n");
 			return -EBUSY;
 		}
-		i2c->setreg = oc_setreg_io_8;
-		i2c->getreg = oc_getreg_io_8;
+		i2c->base = devm_ioport_map(&pdev->dev, res->start,
+					    resource_size(res));
+		if (!i2c->base) {
+			dev_err(&pdev->dev, "Can't map I/O resource.\n");
+			return -EBUSY;
+		}
+		i2c->reg_io_width = 1;
 	}

 	pdata = dev_get_platdata(&pdev->dev);
--- a/drivers/i2c/busses/i2c-octeon-core.c
+++ b/drivers/i2c/busses/i2c-octeon-core.c
@ -17,9 +17,14 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/pci.h>

 #include "i2c-octeon-core.h"

+#define INITIAL_DELTA_HZ		1000000
+#define TWSI_MASTER_CLK_REG_DEF_VAL	0x18
+#define TWSI_MASTER_CLK_REG_OTX2_VAL	0x3
+
 /* interrupt service routine */
 irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
 {
@ -80,7 +85,7 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)

 static bool octeon_i2c_hlc_test_valid(struct octeon_i2c *i2c)
 {
-	return (__raw_readq(i2c->twsi_base + SW_TWSI(i2c)) & SW_TWSI_V) == 0;
+	return (__raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c)) & SW_TWSI_V) == 0;
 }

 static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c)
@ -177,13 +182,14 @@ static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
 static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
 {
 	u8 stat;
+	u64 mode;

 	/*
 	 * This is ugly... in HLC mode the status is not in the status register
-	 * but in the lower 8 bits of SW_TWSI.
+	 * but in the lower 8 bits of OCTEON_REG_SW_TWSI.
 	 */
 	if (i2c->hlc_enabled)
-		stat = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+		stat = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
 	else
 		stat = octeon_i2c_stat_read(i2c);

@ -239,6 +245,13 @@ static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
 	case STAT_RXADDR_NAK:
 	case STAT_AD2W_NAK:
 		return -ENXIO;
+
+	case STAT_WDOG_TOUT:
+		mode = __raw_readq(i2c->twsi_base + OCTEON_REG_MODE(i2c));
+		/* Set BUS_MON_RST to reset bus monitor */
+		mode |= BUS_MON_RST_MASK;
+		octeon_i2c_writeq_flush(mode, i2c->twsi_base + OCTEON_REG_MODE(i2c));
+		return -EIO;
 	default:
 		dev_err(i2c->dev, "unhandled state: %d\n", stat);
 		return -EIO;
@ -419,12 +432,12 @@ static int octeon_i2c_hlc_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
 	else
 		cmd |= SW_TWSI_OP_7;

-	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
 	ret = octeon_i2c_hlc_wait(i2c);
 	if (ret)
 		goto err;

-	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	cmd = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
 	if ((cmd & SW_TWSI_R) == 0)
 		return octeon_i2c_check_status(i2c, false);

@ -432,7 +445,7 @@ static int octeon_i2c_hlc_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
 		msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;

 	if (msgs[0].len > 4) {
-		cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT(i2c));
+		cmd = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI_EXT(i2c));
 		for (i = 0; i  < msgs[0].len - 4 && i < 4; i++, j--)
 			msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
 	}
@ -469,15 +482,15 @@ static int octeon_i2c_hlc_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)

 		for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
 			ext |= (u64)msgs[0].buf[j] << (8 * i);
-		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
+		octeon_i2c_writeq_flush(ext, i2c->twsi_base + OCTEON_REG_SW_TWSI_EXT(i2c));
 	}

-	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
 	ret = octeon_i2c_hlc_wait(i2c);
 	if (ret)
 		goto err;

-	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	cmd = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
 	if ((cmd & SW_TWSI_R) == 0)
 		return octeon_i2c_check_status(i2c, false);

@ -510,19 +523,19 @@ static int octeon_i2c_hlc_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs
 		cmd |= SW_TWSI_EIA;
 		ext = (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
 		cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
-		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
+		octeon_i2c_writeq_flush(ext, i2c->twsi_base + OCTEON_REG_SW_TWSI_EXT(i2c));
 	} else {
 		cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
 	}

 	octeon_i2c_hlc_int_clear(i2c);
-	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));

 	ret = octeon_i2c_hlc_wait(i2c);
 	if (ret)
 		goto err;

-	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	cmd = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
 	if ((cmd & SW_TWSI_R) == 0)
 		return octeon_i2c_check_status(i2c, false);

@ -530,7 +543,7 @@ static int octeon_i2c_hlc_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs
 		msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;

 	if (msgs[1].len > 4) {
-		cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT(i2c));
+		cmd = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI_EXT(i2c));
 		for (i = 0; i  < msgs[1].len - 4 && i < 4; i++, j--)
 			msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
 	}
@ -577,16 +590,16 @@ static int octeon_i2c_hlc_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msg
 		set_ext = true;
 	}
 	if (set_ext)
-		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
+		octeon_i2c_writeq_flush(ext, i2c->twsi_base + OCTEON_REG_SW_TWSI_EXT(i2c));

 	octeon_i2c_hlc_int_clear(i2c);
-	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));

 	ret = octeon_i2c_hlc_wait(i2c);
 	if (ret)
 		goto err;

-	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	cmd = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
 	if ((cmd & SW_TWSI_R) == 0)
 		return octeon_i2c_check_status(i2c, false);

@ -607,25 +620,27 @@ int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
 	int i, ret = 0;

-	if (num == 1) {
-		if (msgs[0].len > 0 && msgs[0].len <= 8) {
-			if (msgs[0].flags & I2C_M_RD)
-				ret = octeon_i2c_hlc_read(i2c, msgs);
-			else
-				ret = octeon_i2c_hlc_write(i2c, msgs);
-			goto out;
-		}
-	} else if (num == 2) {
-		if ((msgs[0].flags & I2C_M_RD) == 0 &&
-		    (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
-		    msgs[0].len > 0 && msgs[0].len <= 2 &&
-		    msgs[1].len > 0 && msgs[1].len <= 8 &&
-		    msgs[0].addr == msgs[1].addr) {
-			if (msgs[1].flags & I2C_M_RD)
-				ret = octeon_i2c_hlc_comp_read(i2c, msgs);
-			else
-				ret = octeon_i2c_hlc_comp_write(i2c, msgs);
-			goto out;
+	if (IS_LS_FREQ(i2c->twsi_freq)) {
+		if (num == 1) {
+			if (msgs[0].len > 0 && msgs[0].len <= 8) {
+				if (msgs[0].flags & I2C_M_RD)
+					ret = octeon_i2c_hlc_read(i2c, msgs);
+				else
+					ret = octeon_i2c_hlc_write(i2c, msgs);
+				goto out;
+			}
+		} else if (num == 2) {
+			if ((msgs[0].flags & I2C_M_RD) == 0 &&
+			    (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
+			    msgs[0].len > 0 && msgs[0].len <= 2 &&
+			    msgs[1].len > 0 && msgs[1].len <= 8 &&
+			    msgs[0].addr == msgs[1].addr) {
+				if (msgs[1].flags & I2C_M_RD)
+					ret = octeon_i2c_hlc_comp_read(i2c, msgs);
+				else
+					ret = octeon_i2c_hlc_comp_write(i2c, msgs);
+				goto out;
+			}
 		}
 	}

@ -658,31 +673,64 @@ out:
 void octeon_i2c_set_clock(struct octeon_i2c *i2c)
 {
 	int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
-	int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
+	bool is_plat_otx2;
+	/*
+	 * Find divisors to produce target frequency, start with large delta
+	 * to cover wider range of divisors, note thp = TCLK half period and
+	 * ds is OSCL output frequency divisor.
+	 */
+	unsigned int thp, mdiv_min, mdiv = 2, ndiv = 0, ds = 10;
+	unsigned int delta_hz = INITIAL_DELTA_HZ;
+
+	is_plat_otx2 = octeon_i2c_is_otx2(to_pci_dev(i2c->dev));
+
+	if (is_plat_otx2) {
+		thp = TWSI_MASTER_CLK_REG_OTX2_VAL;
+		mdiv_min = 0;
+		if (!IS_LS_FREQ(i2c->twsi_freq))
+			ds = 15;
+	} else {
+		thp = TWSI_MASTER_CLK_REG_DEF_VAL;
+		mdiv_min = 2;
+	}

 	for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
 		/*
 		 * An mdiv value of less than 2 seems to not work well
 		 * with ds1337 RTCs, so we constrain it to larger values.
 		 */
-		for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
+		for (mdiv_idx = 15; mdiv_idx >= mdiv_min && delta_hz != 0; mdiv_idx--) {
 			/*
 			 * For given ndiv and mdiv values check the
 			 * two closest thp values.
 			 */
-			tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
+			tclk = i2c->twsi_freq * (mdiv_idx + 1) * ds;
 			tclk *= (1 << ndiv_idx);
-			thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+			if (is_plat_otx2)
+				thp_base = (i2c->sys_freq / tclk) - 2;
+			else
+				thp_base = (i2c->sys_freq / (tclk * 2)) - 1;

 			for (inc = 0; inc <= 1; inc++) {
 				thp_idx = thp_base + inc;
 				if (thp_idx < 5 || thp_idx > 0xff)
 					continue;

-				foscl = i2c->sys_freq / (2 * (thp_idx + 1));
+				if (is_plat_otx2)
+					foscl = i2c->sys_freq / (thp_idx + 2);
+				else
+					foscl = i2c->sys_freq /
+						(2 * (thp_idx + 1));
 				foscl = foscl / (1 << ndiv_idx);
-				foscl = foscl / (mdiv_idx + 1) / 10;
+				foscl = foscl / (mdiv_idx + 1) / ds;
+				if (foscl > i2c->twsi_freq)
+					continue;
 				diff = abs(foscl - i2c->twsi_freq);
+				/*
+				 * Diff holds difference between calculated frequency
+				 * value vs desired frequency.
+				 * Delta_hz is updated with last minimum diff.
+				 */
 				if (diff < delta_hz) {
 					delta_hz = diff;
 					thp = thp_idx;
@ -694,6 +742,17 @@ void octeon_i2c_set_clock(struct octeon_i2c *i2c)
 	}
 	octeon_i2c_reg_write(i2c, SW_TWSI_OP_TWSI_CLK, thp);
 	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
+	if (is_plat_otx2) {
+		u64 mode;
+
+		mode = __raw_readq(i2c->twsi_base + OCTEON_REG_MODE(i2c));
+		/* Set REFCLK_SRC and HS_MODE in TWSX_MODE register */
+		if (!IS_LS_FREQ(i2c->twsi_freq))
+			mode |= TWSX_MODE_HS_MASK;
+		else
+			mode &= ~TWSX_MODE_HS_MASK;
+		octeon_i2c_writeq_flush(mode, i2c->twsi_base + OCTEON_REG_MODE(i2c));
+	}
 }

 int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
--- a/drivers/i2c/busses/i2c-octeon-core.h
+++ b/drivers/i2c/busses/i2c-octeon-core.h
@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/atomic.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
@ -7,6 +8,7 @@
 #include <linux/i2c-smbus.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/pci.h>

 /* Controller command patterns */
 #define SW_TWSI_V		BIT_ULL(63)	/* Valid bit */
@ -71,6 +73,7 @@
 #define STAT_SLAVE_ACK		0xC8
 #define STAT_AD2W_ACK		0xD0
 #define STAT_AD2W_NAK		0xD8
+#define STAT_WDOG_TOUT		0xF0
 #define STAT_IDLE		0xF8

 /* TWSI_INT values */
@ -92,11 +95,21 @@ struct octeon_i2c_reg_offset {
 	unsigned int sw_twsi;
 	unsigned int twsi_int;
 	unsigned int sw_twsi_ext;
+	unsigned int mode;
 };

-#define SW_TWSI(x)	(x->roff.sw_twsi)
-#define TWSI_INT(x)	(x->roff.twsi_int)
-#define SW_TWSI_EXT(x)	(x->roff.sw_twsi_ext)
+#define OCTEON_REG_SW_TWSI(x)		((x)->roff.sw_twsi)
+#define OCTEON_REG_TWSI_INT(x)		((x)->roff.twsi_int)
+#define OCTEON_REG_SW_TWSI_EXT(x)	((x)->roff.sw_twsi_ext)
+#define OCTEON_REG_MODE(x)		((x)->roff.mode)
+
+/* Set REFCLK_SRC and HS_MODE in TWSX_MODE register */
+#define TWSX_MODE_REFCLK_SRC	BIT(4)
+#define TWSX_MODE_HS_MODE	BIT(0)
+#define TWSX_MODE_HS_MASK	(TWSX_MODE_REFCLK_SRC | TWSX_MODE_HS_MODE)
+
+/* Set BUS_MON_RST to reset bus monitor */
+#define BUS_MON_RST_MASK	BIT(3)

 struct octeon_i2c {
 	wait_queue_head_t queue;
@ -134,16 +147,16 @@ static inline void octeon_i2c_writeq_flush(u64 val, void __iomem *addr)
 * @eop_reg: Register selector
 * @data: Value to be written
 *
- * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ * The I2C core registers are accessed indirectly via the OCTEON_REG_SW_TWSI CSR.
 */
 static inline void octeon_i2c_reg_write(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
 {
 	int tries = 1000;
 	u64 tmp;

-	__raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI(i2c));
+	__raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
 	do {
-		tmp = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+		tmp = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
 		if (--tries < 0)
 			return;
 	} while ((tmp & SW_TWSI_V) != 0);
@ -169,9 +182,9 @@ static inline int octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg,
 	int tries = 1000;
 	u64 tmp;

-	__raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI(i2c));
+	__raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
 	do {
-		tmp = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+		tmp = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
 		if (--tries < 0) {
 			/* signal that the returned data is invalid */
 			if (error)
@ -191,24 +204,40 @@ static inline int octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg,
 	octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_STAT, NULL)

 /**
- * octeon_i2c_read_int - read the TWSI_INT register
+ * octeon_i2c_read_int - read the OCTEON_REG_TWSI_INT register
 * @i2c: The struct octeon_i2c
 *
 * Returns the value of the register.
 */
 static inline u64 octeon_i2c_read_int(struct octeon_i2c *i2c)
 {
-	return __raw_readq(i2c->twsi_base + TWSI_INT(i2c));
+	return __raw_readq(i2c->twsi_base + OCTEON_REG_TWSI_INT(i2c));
 }

 /**
- * octeon_i2c_write_int - write the TWSI_INT register
+ * octeon_i2c_write_int - write the OCTEON_REG_TWSI_INT register
 * @i2c: The struct octeon_i2c
 * @data: Value to be written
 */
 static inline void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
 {
-	octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT(i2c));
+	octeon_i2c_writeq_flush(data, i2c->twsi_base + OCTEON_REG_TWSI_INT(i2c));
+}
+
+#define IS_LS_FREQ(twsi_freq)	((twsi_freq) <= 400000)
+#define PCI_SUBSYS_DEVID_9XXX	0xB
+#define PCI_SUBSYS_MASK		GENMASK(15, 12)
+/**
+ * octeon_i2c_is_otx2 - check for chip ID
+ * @pdev: PCI dev structure
+ *
+ * Returns true if the device is an OcteonTX2, false otherwise.
+ */
+static inline bool octeon_i2c_is_otx2(struct pci_dev *pdev)
+{
+	u32 chip_id = FIELD_GET(PCI_SUBSYS_MASK, pdev->subsystem_device);
+
+	return (chip_id == PCI_SUBSYS_DEVID_9XXX);
 }

 /* Prototypes */
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@ -660,7 +660,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 			     struct i2c_msg *msg, int stop, bool polling)
 {
 	struct omap_i2c_dev *omap = i2c_get_adapdata(adap);
-	unsigned long timeout;
+	unsigned long time_left;
 	u16 w;
 	int ret;

@ -740,19 +740,18 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	 * into arbitration and we're currently unable to recover from it.
 	 */
 	if (!polling) {
-		timeout = wait_for_completion_timeout(&omap->cmd_complete,
-						      OMAP_I2C_TIMEOUT);
+		time_left = wait_for_completion_timeout(&omap->cmd_complete,
+							OMAP_I2C_TIMEOUT);
 	} else {
 		do {
 			omap_i2c_wait(omap);
 			ret = omap_i2c_xfer_data(omap);
 		} while (ret == -EAGAIN);

-		timeout = !ret;
+		time_left = !ret;
 	}

-	if (timeout == 0) {
-		dev_err(omap->dev, "controller timed out\n");
+	if (time_left == 0) {
 		omap_i2c_reset(omap);
 		__omap_i2c_init(omap);
 		return -ETIMEDOUT;
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@ -826,7 +826,7 @@ static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c)
 static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c)
 {
 	u32 icr;
-	long timeout;
+	long time_left;

 	spin_lock_irq(&i2c->lock);
 	i2c->highmode_enter = true;
@ -837,12 +837,12 @@ static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c)
 	writel(icr, _ICR(i2c));

 	spin_unlock_irq(&i2c->lock);
-	timeout = wait_event_timeout(i2c->wait,
-			i2c->highmode_enter == false, HZ * 1);
+	time_left = wait_event_timeout(i2c->wait,
+				       i2c->highmode_enter == false, HZ * 1);

 	i2c->highmode_enter = false;

-	return (timeout == 0) ? I2C_RETRY : 0;
+	return (time_left == 0) ? I2C_RETRY : 0;
 }

 /*
@ -1050,7 +1050,7 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
 */
 static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
 {
-	long timeout;
+	long time_left;
 	int ret;

 	/*
@ -1095,7 +1095,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
 	/*
 	 * The rest of the processing occurs in the interrupt handler.
 	 */
-	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
+	time_left = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
 	i2c_pxa_stop_message(i2c);

 	/*
@ -1103,7 +1103,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
 	 */
 	ret = i2c->msg_idx;

-	if (!timeout && i2c->msg_num) {
+	if (!time_left && i2c->msg_num) {
 		i2c_pxa_scream_blue_murder(i2c, "timeout with active message");
 		i2c_recover_bus(&i2c->adap);
 		ret = I2C_RETRY;
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@ -586,7 +586,8 @@ static int geni_i2c_gpi_xfer(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], i
 {
 	struct dma_slave_config config = {};
 	struct gpi_i2c_config peripheral = {};
-	int i, ret = 0, timeout;
+	int i, ret = 0;
+	unsigned long time_left;
 	dma_addr_t tx_addr, rx_addr;
 	void *tx_buf = NULL, *rx_buf = NULL;
 	const struct geni_i2c_clk_fld *itr = gi2c->clk_fld;
@ -629,12 +630,9 @@ static int geni_i2c_gpi_xfer(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], i

 		dma_async_issue_pending(gi2c->tx_c);

-		timeout = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
-		if (!timeout) {
-			dev_err(gi2c->se.dev, "I2C timeout gpi flags:%d addr:0x%x\n",
-				gi2c->cur->flags, gi2c->cur->addr);
+		time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
+		if (!time_left)
 			gi2c->err = -ETIMEDOUT;
-		}

 		if (gi2c->err) {
 			ret = gi2c->err;
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@ -793,10 +793,8 @@ static int qup_i2c_bam_schedule_desc(struct qup_i2c_dev *qup)
 		dma_async_issue_pending(qup->brx.dma);
 	}

-	if (!wait_for_completion_timeout(&qup->xfer, qup->xfer_timeout)) {
-		dev_err(qup->dev, "normal trans timed out\n");
+	if (!wait_for_completion_timeout(&qup->xfer, qup->xfer_timeout))
 		ret = -ETIMEDOUT;
-	}

 	if (ret || qup->bus_err || qup->qup_err) {
 		reinit_completion(&qup->xfer);
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@ -46,18 +46,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>

-#define RIIC_ICCR1	0x00
-#define RIIC_ICCR2	0x04
-#define RIIC_ICMR1	0x08
-#define RIIC_ICMR3	0x10
-#define RIIC_ICSER	0x18
-#define RIIC_ICIER	0x1c
-#define RIIC_ICSR2	0x24
-#define RIIC_ICBRL	0x34
-#define RIIC_ICBRH	0x38
-#define RIIC_ICDRT	0x3c
-#define RIIC_ICDRR	0x40
-
 #define ICCR1_ICE	0x80
 #define ICCR1_IICRST	0x40
 #define ICCR1_SOWP	0x10
@ -87,6 +75,25 @@

 #define RIIC_INIT_MSG	-1

+enum riic_reg_list {
+	RIIC_ICCR1 = 0,
+	RIIC_ICCR2,
+	RIIC_ICMR1,
+	RIIC_ICMR3,
+	RIIC_ICSER,
+	RIIC_ICIER,
+	RIIC_ICSR2,
+	RIIC_ICBRL,
+	RIIC_ICBRH,
+	RIIC_ICDRT,
+	RIIC_ICDRR,
+	RIIC_REG_END,
+};
+
+struct riic_of_data {
+	u8 regs[RIIC_REG_END];
+};
+
 struct riic_dev {
 	void __iomem *base;
 	u8 *buf;
@ -94,6 +101,7 @@ struct riic_dev {
 	int bytes_left;
 	int err;
 	int is_last;
+	const struct riic_of_data *info;
 	struct completion msg_done;
 	struct i2c_adapter adapter;
 	struct clk *clk;
@ -105,9 +113,19 @@ struct riic_irq_desc {
 	char *name;
 };

+static inline void riic_writeb(struct riic_dev *riic, u8 val, u8 offset)
+{
+	writeb(val, riic->base + riic->info->regs[offset]);
+}
+
+static inline u8 riic_readb(struct riic_dev *riic, u8 offset)
+{
+	return readb(riic->base + riic->info->regs[offset]);
+}
+
 static inline void riic_clear_set_bit(struct riic_dev *riic, u8 clear, u8 set, u8 reg)
 {
-	writeb((readb(riic->base + reg) & ~clear) | set, riic->base + reg);
+	riic_writeb(riic, (riic_readb(riic, reg) & ~clear) | set, reg);
 }

 static int riic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@ -119,7 +137,7 @@ static int riic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)

 	pm_runtime_get_sync(adap->dev.parent);

-	if (readb(riic->base + RIIC_ICCR2) & ICCR2_BBSY) {
+	if (riic_readb(riic, RIIC_ICCR2) & ICCR2_BBSY) {
 		riic->err = -EBUSY;
 		goto out;
 	}
@ -127,7 +145,7 @@ static int riic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	reinit_completion(&riic->msg_done);
 	riic->err = 0;

-	writeb(0, riic->base + RIIC_ICSR2);
+	riic_writeb(riic, 0, RIIC_ICSR2);

 	for (i = 0, start_bit = ICCR2_ST; i < num; i++) {
 		riic->bytes_left = RIIC_INIT_MSG;
@ -135,9 +153,9 @@ static int riic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		riic->msg = &msgs[i];
 		riic->is_last = (i == num - 1);

-		writeb(ICIER_NAKIE | ICIER_TIE, riic->base + RIIC_ICIER);
+		riic_writeb(riic, ICIER_NAKIE | ICIER_TIE, RIIC_ICIER);

-		writeb(start_bit, riic->base + RIIC_ICCR2);
+		riic_writeb(riic, start_bit, RIIC_ICCR2);

 		time_left = wait_for_completion_timeout(&riic->msg_done, riic->adapter.timeout);
 		if (time_left == 0)
@ -191,7 +209,7 @@ static irqreturn_t riic_tdre_isr(int irq, void *data)
 	 * value could be moved to the shadow shift register right away. So
 	 * this must be after updates to ICIER (where we want to disable TIE)!
 	 */
-	writeb(val, riic->base + RIIC_ICDRT);
+	riic_writeb(riic, val, RIIC_ICDRT);

 	return IRQ_HANDLED;
 }
@ -200,9 +218,9 @@ static irqreturn_t riic_tend_isr(int irq, void *data)
 {
 	struct riic_dev *riic = data;

-	if (readb(riic->base + RIIC_ICSR2) & ICSR2_NACKF) {
+	if (riic_readb(riic, RIIC_ICSR2) & ICSR2_NACKF) {
 		/* We got a NACKIE */
-		readb(riic->base + RIIC_ICDRR);	/* dummy read */
+		riic_readb(riic, RIIC_ICDRR);	/* dummy read */
 		riic_clear_set_bit(riic, ICSR2_NACKF, 0, RIIC_ICSR2);
 		riic->err = -ENXIO;
 	} else if (riic->bytes_left) {
@ -211,7 +229,7 @@ static irqreturn_t riic_tend_isr(int irq, void *data)

 	if (riic->is_last || riic->err) {
 		riic_clear_set_bit(riic, ICIER_TEIE, ICIER_SPIE, RIIC_ICIER);
-		writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
+		riic_writeb(riic, ICCR2_SP, RIIC_ICCR2);
 	} else {
 		/* Transfer is complete, but do not send STOP */
 		riic_clear_set_bit(riic, ICIER_TEIE, 0, RIIC_ICIER);
@ -230,7 +248,7 @@ static irqreturn_t riic_rdrf_isr(int irq, void *data)

 	if (riic->bytes_left == RIIC_INIT_MSG) {
 		riic->bytes_left = riic->msg->len;
-		readb(riic->base + RIIC_ICDRR);	/* dummy read */
+		riic_readb(riic, RIIC_ICDRR);	/* dummy read */
 		return IRQ_HANDLED;
 	}

@ -238,7 +256,7 @@ static irqreturn_t riic_rdrf_isr(int irq, void *data)
 		/* STOP must come before we set ACKBT! */
 		if (riic->is_last) {
 			riic_clear_set_bit(riic, 0, ICIER_SPIE, RIIC_ICIER);
-			writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
+			riic_writeb(riic, ICCR2_SP, RIIC_ICCR2);
 		}

 		riic_clear_set_bit(riic, 0, ICMR3_ACKBT, RIIC_ICMR3);
@ -248,7 +266,7 @@ static irqreturn_t riic_rdrf_isr(int irq, void *data)
 	}

 	/* Reading acks the RIE interrupt */
-	*riic->buf = readb(riic->base + RIIC_ICDRR);
+	*riic->buf = riic_readb(riic, RIIC_ICDRR);
 	riic->buf++;
 	riic->bytes_left--;

@ -260,10 +278,10 @@ static irqreturn_t riic_stop_isr(int irq, void *data)
 	struct riic_dev *riic = data;

 	/* read back registers to confirm writes have fully propagated */
-	writeb(0, riic->base + RIIC_ICSR2);
-	readb(riic->base + RIIC_ICSR2);
-	writeb(0, riic->base + RIIC_ICIER);
-	readb(riic->base + RIIC_ICIER);
+	riic_writeb(riic, 0, RIIC_ICSR2);
+	riic_readb(riic, RIIC_ICSR2);
+	riic_writeb(riic, 0, RIIC_ICIER);
+	riic_readb(riic, RIIC_ICIER);

 	complete(&riic->msg_done);

@ -365,15 +383,15 @@ static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t)
 		 t->scl_rise_ns / (1000000000 / rate), cks, brl, brh);

 	/* Changing the order of accessing IICRST and ICE may break things! */
-	writeb(ICCR1_IICRST | ICCR1_SOWP, riic->base + RIIC_ICCR1);
+	riic_writeb(riic, ICCR1_IICRST | ICCR1_SOWP, RIIC_ICCR1);
 	riic_clear_set_bit(riic, 0, ICCR1_ICE, RIIC_ICCR1);

-	writeb(ICMR1_CKS(cks), riic->base + RIIC_ICMR1);
-	writeb(brh | ICBR_RESERVED, riic->base + RIIC_ICBRH);
-	writeb(brl | ICBR_RESERVED, riic->base + RIIC_ICBRL);
+	riic_writeb(riic, ICMR1_CKS(cks), RIIC_ICMR1);
+	riic_writeb(riic, brh | ICBR_RESERVED, RIIC_ICBRH);
+	riic_writeb(riic, brl | ICBR_RESERVED, RIIC_ICBRL);

-	writeb(0, riic->base + RIIC_ICSER);
-	writeb(ICMR3_ACKWP | ICMR3_RDRFS, riic->base + RIIC_ICMR3);
+	riic_writeb(riic, 0, RIIC_ICSER);
+	riic_writeb(riic, ICMR3_ACKWP | ICMR3_RDRFS, RIIC_ICMR3);

 	riic_clear_set_bit(riic, ICCR1_IICRST, 0, RIIC_ICCR1);

@ -443,6 +461,8 @@ static int riic_i2c_probe(struct platform_device *pdev)
 		}
 	}

+	riic->info = of_device_get_match_data(&pdev->dev);
+
 	adap = &riic->adapter;
 	i2c_set_adapdata(adap, riic);
 	strscpy(adap->name, "Renesas RIIC adapter", sizeof(adap->name));
@ -481,14 +501,47 @@ static void riic_i2c_remove(struct platform_device *pdev)
 	struct riic_dev *riic = platform_get_drvdata(pdev);

 	pm_runtime_get_sync(&pdev->dev);
-	writeb(0, riic->base + RIIC_ICIER);
+	riic_writeb(riic, 0, RIIC_ICIER);
 	pm_runtime_put(&pdev->dev);
 	i2c_del_adapter(&riic->adapter);
 	pm_runtime_disable(&pdev->dev);
 }

+static const struct riic_of_data riic_rz_a_info = {
+	.regs = {
+		[RIIC_ICCR1] = 0x00,
+		[RIIC_ICCR2] = 0x04,
+		[RIIC_ICMR1] = 0x08,
+		[RIIC_ICMR3] = 0x10,
+		[RIIC_ICSER] = 0x18,
+		[RIIC_ICIER] = 0x1c,
+		[RIIC_ICSR2] = 0x24,
+		[RIIC_ICBRL] = 0x34,
+		[RIIC_ICBRH] = 0x38,
+		[RIIC_ICDRT] = 0x3c,
+		[RIIC_ICDRR] = 0x40,
+	},
+};
+
+static const struct riic_of_data riic_rz_v2h_info = {
+	.regs = {
+		[RIIC_ICCR1] = 0x00,
+		[RIIC_ICCR2] = 0x01,
+		[RIIC_ICMR1] = 0x02,
+		[RIIC_ICMR3] = 0x04,
+		[RIIC_ICSER] = 0x06,
+		[RIIC_ICIER] = 0x07,
+		[RIIC_ICSR2] = 0x09,
+		[RIIC_ICBRL] = 0x10,
+		[RIIC_ICBRH] = 0x11,
+		[RIIC_ICDRT] = 0x12,
+		[RIIC_ICDRR] = 0x13,
+	},
+};
+
 static const struct of_device_id riic_i2c_dt_ids[] = {
-	{ .compatible = "renesas,riic-rz", },
+	{ .compatible = "renesas,riic-rz", .data = &riic_rz_a_info },
+	{ .compatible = "renesas,riic-r9a09g057", .data = &riic_rz_v2h_info },
 	{ /* Sentinel */ },
 };

--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@ -1060,7 +1060,8 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
 				struct i2c_msg *msgs, int num, bool polling)
 {
 	struct rk3x_i2c *i2c = (struct rk3x_i2c *)adap->algo_data;
-	unsigned long timeout, flags;
+	unsigned long flags;
+	long time_left;
 	u32 val;
 	int ret = 0;
 	int i;
@ -1092,23 +1093,20 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
 		if (!polling) {
 			rk3x_i2c_start(i2c);

-			timeout = wait_event_timeout(i2c->wait, !i2c->busy,
-						     msecs_to_jiffies(WAIT_TIMEOUT));
+			time_left = wait_event_timeout(i2c->wait, !i2c->busy,
+						       msecs_to_jiffies(WAIT_TIMEOUT));
 		} else {
 			disable_irq(i2c->irq);
 			rk3x_i2c_start(i2c);

-			timeout = rk3x_i2c_wait_xfer_poll(i2c);
+			time_left = rk3x_i2c_wait_xfer_poll(i2c);

 			enable_irq(i2c->irq);
 		}

 		spin_lock_irqsave(&i2c->lock, flags);

-		if (timeout == 0) {
-			dev_err(i2c->dev, "timeout, ipd: 0x%02x, state: %d\n",
-				i2c_readl(i2c, REG_IPD), i2c->state);
-
+		if (time_left == 0) {
 			/* Force a STOP condition without interrupt */
 			i2c_writel(i2c, 0, REG_IEN);
 			val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@ -685,7 +685,7 @@ static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c)
 static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 			      struct i2c_msg *msgs, int num)
 {
-	unsigned long timeout = 0;
+	long time_left = 0;
 	int ret;

 	ret = s3c24xx_i2c_set_master(i2c);
@ -715,7 +715,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 				dev_err(i2c->dev, "deal with arbitration loss\n");
 		}
 	} else {
-		timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
+		time_left = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
 	}

 	ret = i2c->msg_idx;
@ -724,7 +724,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 	 * Having these next two as dev_err() makes life very
 	 * noisy when doing an i2cdetect
 	 */
-	if (timeout == 0)
+	if (time_left == 0)
 		dev_dbg(i2c->dev, "timeout\n");
 	else if (ret != num)
 		dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@ -688,7 +688,6 @@ static int sh_mobile_xfer(struct sh_mobile_i2c_data *pd,
 		}

 		if (!time_left) {
-			dev_err(pd->dev, "Transfer request timed out\n");
 			if (pd->dma_direction != DMA_NONE)
 				sh_mobile_i2c_cleanup_dma(pd, true);

--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@ -647,7 +647,7 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
 {
 	struct st_i2c_client *c = &i2c_dev->client;
 	u32 ctl, i2c, it;
-	unsigned long timeout;
+	unsigned long time_left;
 	int ret;

 	c->addr		= i2c_8bit_addr_from_msg(msg);
@ -685,15 +685,12 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
 		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STRTG);
 	}

-	timeout = wait_for_completion_timeout(&i2c_dev->complete,
-			i2c_dev->adap.timeout);
+	time_left = wait_for_completion_timeout(&i2c_dev->complete,
+						i2c_dev->adap.timeout);
 	ret = c->result;

-	if (!timeout) {
-		dev_err(i2c_dev->dev, "Write to slave 0x%x timed out\n",
-				c->addr);
+	if (!time_left)
 		ret = -ETIMEDOUT;
-	}

 	i2c = SSC_I2C_STOPG | SSC_I2C_REPSTRTG;
 	st_i2c_clr_bits(i2c_dev->base + SSC_I2C, i2c);
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@ -681,7 +681,7 @@ static int stm32f4_i2c_xfer_msg(struct stm32f4_i2c_dev *i2c_dev,
 {
 	struct stm32f4_i2c_msg *f4_msg = &i2c_dev->msg;
 	void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1;
-	unsigned long timeout;
+	unsigned long time_left;
 	u32 mask;
 	int ret;

@ -706,11 +706,11 @@ static int stm32f4_i2c_xfer_msg(struct stm32f4_i2c_dev *i2c_dev,
 		stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
 	}

-	timeout = wait_for_completion_timeout(&i2c_dev->complete,
-					      i2c_dev->adap.timeout);
+	time_left = wait_for_completion_timeout(&i2c_dev->complete,
+						i2c_dev->adap.timeout);
 	ret = f4_msg->result;

-	if (!timeout)
+	if (!time_left)
 		ret = -ETIMEDOUT;

 	return ret;
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@ -1789,7 +1789,7 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
 	struct stm32_i2c_dma *dma = i2c_dev->dma;
 	struct device *dev = i2c_dev->dev;
-	unsigned long timeout;
+	unsigned long time_left;
 	int i, ret;

 	f7_msg->addr = addr;
@ -1809,8 +1809,8 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 	if (ret)
 		goto pm_free;

-	timeout = wait_for_completion_timeout(&i2c_dev->complete,
-					      i2c_dev->adap.timeout);
+	time_left = wait_for_completion_timeout(&i2c_dev->complete,
+						i2c_dev->adap.timeout);
 	ret = f7_msg->result;
 	if (ret) {
 		if (i2c_dev->use_dma)
@ -1826,7 +1826,7 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 		goto pm_free;
 	}

-	if (!timeout) {
+	if (!time_left) {
 		dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);
 		if (i2c_dev->use_dma)
 			dmaengine_terminate_sync(dma->chan_using);
--- a/drivers/i2c/busses/i2c-synquacer.c
+++ b/drivers/i2c/busses/i2c-synquacer.c
@ -311,7 +311,7 @@ static int synquacer_i2c_doxfer(struct synquacer_i2c *i2c,
 				struct i2c_msg *msgs, int num)
 {
 	unsigned char bsr;
-	unsigned long timeout;
+	unsigned long time_left;
 	int ret;

 	synquacer_i2c_hw_init(i2c);
@ -335,9 +335,9 @@ static int synquacer_i2c_doxfer(struct synquacer_i2c *i2c,
 		return ret;
 	}

-	timeout = wait_for_completion_timeout(&i2c->completion,
-					msecs_to_jiffies(i2c->timeout_ms));
-	if (timeout == 0) {
+	time_left = wait_for_completion_timeout(&i2c->completion,
+						msecs_to_jiffies(i2c->timeout_ms));
+	if (time_left == 0) {
 		dev_dbg(i2c->dev, "timeout\n");
 		return -EAGAIN;
 	}
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@ -1331,7 +1331,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		dmaengine_terminate_sync(i2c_dev->dma_chan);

 		if (!time_left && !completion_done(&i2c_dev->dma_complete)) {
-			dev_err(i2c_dev->dev, "DMA transfer timed out\n");
 			tegra_i2c_init(i2c_dev);
 			return -ETIMEDOUT;
 		}
@ -1351,7 +1350,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	tegra_i2c_mask_irq(i2c_dev, int_mask);

 	if (time_left == 0) {
-		dev_err(i2c_dev->dev, "I2C transfer timed out\n");
 		tegra_i2c_init(i2c_dev);
 		return -ETIMEDOUT;
 	}
--- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@ -27,7 +27,8 @@

 #define PCI_DEVICE_ID_THUNDER_TWSI	0xa012

-#define SYS_FREQ_DEFAULT		700000000
+#define SYS_FREQ_DEFAULT		800000000
+#define OTX2_REF_FREQ_DEFAULT		100000000

 #define TWSI_INT_ENA_W1C		0x1028
 #define TWSI_INT_ENA_W1S		0x1030
@ -99,7 +100,8 @@ static void thunder_i2c_clock_enable(struct device *dev, struct octeon_i2c *i2c)
 		i2c->sys_freq = clk_get_rate(i2c->clk);
 	} else {
 		/* ACPI */
-		device_property_read_u32(dev, "sclk", &i2c->sys_freq);
+		if (device_property_read_u32(dev, "sclk", &i2c->sys_freq))
+			device_property_read_u32(dev, "ioclk", &i2c->sys_freq);
 	}

 skip:
@ -165,6 +167,7 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 	i2c->roff.sw_twsi = 0x1000;
 	i2c->roff.twsi_int = 0x1010;
 	i2c->roff.sw_twsi_ext = 0x1018;
+	i2c->roff.mode = 0x1038;

 	i2c->dev = dev;
 	pci_set_drvdata(pdev, i2c);
@ -205,6 +208,12 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 	if (ret)
 		goto error;

+	/*
+	 * For OcteonTX2 chips, set reference frequency to 100MHz
+	 * as refclk_src in TWSI_MODE register defaults to 100MHz.
+	 */
+	if (octeon_i2c_is_otx2(pdev) && IS_LS_FREQ(i2c->twsi_freq))
+		i2c->sys_freq = OTX2_REF_FREQ_DEFAULT;
 	octeon_i2c_set_clock(i2c);

 	i2c->adap = thunderx_i2c_ops;
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@ -358,7 +358,6 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
 	spin_unlock_irqrestore(&priv->lock, flags);

 	if (!time_left) {
-		dev_err(&adap->dev, "transaction timeout.\n");
 		uniphier_fi2c_recover(priv);
 		return -ETIMEDOUT;
 	}
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@ -71,10 +71,8 @@ static int uniphier_i2c_xfer_byte(struct i2c_adapter *adap, u32 txdata,
 	writel(txdata, priv->membase + UNIPHIER_I2C_DTRM);

 	time_left = wait_for_completion_timeout(&priv->comp, adap->timeout);
-	if (unlikely(!time_left)) {
-		dev_err(&adap->dev, "transaction timeout\n");
+	if (unlikely(!time_left))
 		return -ETIMEDOUT;
-	}

 	rxdata = readl(priv->membase + UNIPHIER_I2C_DREC);
 	if (rxdatap)
--- a/drivers/i2c/busses/i2c-viai2c-common.c
+++ b/drivers/i2c/busses/i2c-viai2c-common.c
@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include <linux/of_irq.h>
+#include "i2c-viai2c-common.h"
+
+int viai2c_wait_bus_not_busy(struct viai2c *i2c)
+{
+	unsigned long timeout;
+
+	timeout = jiffies + VIAI2C_TIMEOUT;
+	while (!(readw(i2c->base + VIAI2C_REG_CSR) & VIAI2C_CSR_READY_MASK)) {
+		if (time_after(jiffies, timeout)) {
+			dev_warn(i2c->dev, "timeout waiting for bus ready\n");
+			return -EBUSY;
+		}
+		msleep(20);
+	}
+
+	return 0;
+}
+
+static int viai2c_write(struct viai2c *i2c, struct i2c_msg *pmsg, int last)
+{
+	u16 val, tcr_val = i2c->tcr;
+
+	i2c->last = last;
+
+	if (pmsg->len == 0) {
+		/*
+		 * We still need to run through the while (..) once, so
+		 * start at -1 and break out early from the loop
+		 */
+		i2c->xfered_len = -1;
+		writew(0, i2c->base + VIAI2C_REG_CDR);
+	} else {
+		writew(pmsg->buf[0] & 0xFF, i2c->base + VIAI2C_REG_CDR);
+	}
+
+	if (i2c->platform == VIAI2C_PLAT_WMT && !(pmsg->flags & I2C_M_NOSTART)) {
+		val = readw(i2c->base + VIAI2C_REG_CR);
+		val &= ~VIAI2C_CR_TX_END;
+		val |= VIAI2C_CR_CPU_RDY;
+		writew(val, i2c->base + VIAI2C_REG_CR);
+	}
+
+	reinit_completion(&i2c->complete);
+
+	tcr_val |= pmsg->addr & VIAI2C_TCR_ADDR_MASK;
+
+	writew(tcr_val, i2c->base + VIAI2C_REG_TCR);
+
+	if (i2c->platform == VIAI2C_PLAT_WMT && pmsg->flags & I2C_M_NOSTART) {
+		val = readw(i2c->base + VIAI2C_REG_CR);
+		val |= VIAI2C_CR_CPU_RDY;
+		writew(val, i2c->base + VIAI2C_REG_CR);
+	}
+
+	if (!wait_for_completion_timeout(&i2c->complete, VIAI2C_TIMEOUT))
+		return -ETIMEDOUT;
+
+	return i2c->ret;
+}
+
+static int viai2c_read(struct viai2c *i2c, struct i2c_msg *pmsg, bool first)
+{
+	u16 val, tcr_val = i2c->tcr;
+
+	val = readw(i2c->base + VIAI2C_REG_CR);
+	val &= ~(VIAI2C_CR_TX_END | VIAI2C_CR_RX_END);
+
+	if (i2c->platform == VIAI2C_PLAT_WMT && !(pmsg->flags & I2C_M_NOSTART))
+		val |= VIAI2C_CR_CPU_RDY;
+
+	if (pmsg->len == 1)
+		val |= VIAI2C_CR_RX_END;
+
+	writew(val, i2c->base + VIAI2C_REG_CR);
+
+	reinit_completion(&i2c->complete);
+
+	tcr_val |= VIAI2C_TCR_READ | (pmsg->addr & VIAI2C_TCR_ADDR_MASK);
+
+	writew(tcr_val, i2c->base + VIAI2C_REG_TCR);
+
+	if ((i2c->platform == VIAI2C_PLAT_WMT && (pmsg->flags & I2C_M_NOSTART)) ||
+	    (i2c->platform == VIAI2C_PLAT_ZHAOXIN && !first)) {
+		val = readw(i2c->base + VIAI2C_REG_CR);
+		val |= VIAI2C_CR_CPU_RDY;
+		writew(val, i2c->base + VIAI2C_REG_CR);
+	}
+
+	if (!wait_for_completion_timeout(&i2c->complete, VIAI2C_TIMEOUT))
+		return -ETIMEDOUT;
+
+	return i2c->ret;
+}
+
+int viai2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct i2c_msg *pmsg;
+	int i;
+	int ret = 0;
+	struct viai2c *i2c = i2c_get_adapdata(adap);
+
+	i2c->mode = VIAI2C_BYTE_MODE;
+	for (i = 0; ret >= 0 && i < num; i++) {
+		pmsg = &msgs[i];
+		if (i2c->platform == VIAI2C_PLAT_WMT && !(pmsg->flags & I2C_M_NOSTART)) {
+			ret = viai2c_wait_bus_not_busy(i2c);
+			if (ret < 0)
+				return ret;
+		}
+
+		i2c->msg = pmsg;
+		i2c->xfered_len = 0;
+
+		if (pmsg->flags & I2C_M_RD)
+			ret = viai2c_read(i2c, pmsg, i == 0);
+		else
+			ret = viai2c_write(i2c, pmsg, (i + 1) == num);
+	}
+
+	return (ret < 0) ? ret : i;
+}
+
+/*
+ * Main process of the byte mode xfer
+ *
+ * Return value indicates whether the transfer is complete
+ *  1: all the data has been successfully transferred
+ *  0: there is still data that needs to be transferred
+ *  -EIO: error occurred
+ */
+static int viai2c_irq_xfer(struct viai2c *i2c)
+{
+	u16 val;
+	struct i2c_msg *msg = i2c->msg;
+	u8 read = msg->flags & I2C_M_RD;
+	void __iomem *base = i2c->base;
+
+	if (read) {
+		msg->buf[i2c->xfered_len] = readw(base + VIAI2C_REG_CDR) >> 8;
+
+		val = readw(base + VIAI2C_REG_CR) | VIAI2C_CR_CPU_RDY;
+		if (i2c->xfered_len == msg->len - 2)
+			val |= VIAI2C_CR_RX_END;
+		writew(val, base + VIAI2C_REG_CR);
+	} else {
+		val = readw(base + VIAI2C_REG_CSR);
+		if (val & VIAI2C_CSR_RCV_NOT_ACK)
+			return -EIO;
+
+		/* I2C_SMBUS_QUICK */
+		if (msg->len == 0) {
+			val = VIAI2C_CR_TX_END | VIAI2C_CR_CPU_RDY | VIAI2C_CR_ENABLE;
+			writew(val, base + VIAI2C_REG_CR);
+			return 1;
+		}
+
+		if ((i2c->xfered_len + 1) == msg->len) {
+			if (i2c->platform == VIAI2C_PLAT_WMT && !i2c->last)
+				writew(VIAI2C_CR_ENABLE, base + VIAI2C_REG_CR);
+			else if (i2c->platform == VIAI2C_PLAT_ZHAOXIN && i2c->last)
+				writeb(VIAI2C_CR_TX_END, base + VIAI2C_REG_CR);
+		} else {
+			writew(msg->buf[i2c->xfered_len + 1] & 0xFF, base + VIAI2C_REG_CDR);
+			writew(VIAI2C_CR_CPU_RDY | VIAI2C_CR_ENABLE, base + VIAI2C_REG_CR);
+		}
+	}
+
+	i2c->xfered_len++;
+
+	return i2c->xfered_len == msg->len;
+}
+
+int __weak viai2c_fifo_irq_xfer(struct viai2c *i2c, bool irq)
+{
+	return 0;
+}
+
+static irqreturn_t viai2c_isr(int irq, void *data)
+{
+	struct viai2c *i2c = data;
+	u8 status;
+
+	/* save the status and write-clear it */
+	status = readw(i2c->base + VIAI2C_REG_ISR);
+	if (!status && i2c->platform == VIAI2C_PLAT_ZHAOXIN)
+		return IRQ_NONE;
+
+	writew(status, i2c->base + VIAI2C_REG_ISR);
+
+	i2c->ret = 0;
+	if (status & VIAI2C_ISR_NACK_ADDR)
+		i2c->ret = -EIO;
+
+	if (i2c->platform == VIAI2C_PLAT_WMT && (status & VIAI2C_ISR_SCL_TIMEOUT))
+		i2c->ret = -ETIMEDOUT;
+
+	if (!i2c->ret) {
+		if (i2c->mode == VIAI2C_BYTE_MODE)
+			i2c->ret = viai2c_irq_xfer(i2c);
+		else
+			i2c->ret = viai2c_fifo_irq_xfer(i2c, true);
+	}
+
+	/* All the data has been successfully transferred or error occurred */
+	if (i2c->ret)
+		complete(&i2c->complete);
+
+	return IRQ_HANDLED;
+}
+
+int viai2c_init(struct platform_device *pdev, struct viai2c **pi2c, int plat)
+{
+	int err;
+	int irq_flags;
+	struct viai2c *i2c;
+	struct device_node *np = pdev->dev.of_node;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(i2c->base))
+		return PTR_ERR(i2c->base);
+
+	if (plat == VIAI2C_PLAT_WMT) {
+		irq_flags = 0;
+		i2c->irq = irq_of_parse_and_map(np, 0);
+		if (!i2c->irq)
+			return -EINVAL;
+	} else if (plat == VIAI2C_PLAT_ZHAOXIN) {
+		irq_flags = IRQF_SHARED;
+		i2c->irq = platform_get_irq(pdev, 0);
+		if (i2c->irq < 0)
+			return i2c->irq;
+	} else {
+		return dev_err_probe(&pdev->dev, -EINVAL, "wrong platform type\n");
+	}
+
+	i2c->platform = plat;
+
+	err = devm_request_irq(&pdev->dev, i2c->irq, viai2c_isr,
+			       irq_flags, pdev->name, i2c);
+	if (err)
+		return dev_err_probe(&pdev->dev, err,
+				"failed to request irq %i\n", i2c->irq);
+
+	i2c->dev = &pdev->dev;
+	init_completion(&i2c->complete);
+	platform_set_drvdata(pdev, i2c);
+
+	*pi2c = i2c;
+	return 0;
+}
--- a/drivers/i2c/busses/i2c-viai2c-common.h
+++ b/drivers/i2c/busses/i2c-viai2c-common.h
@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __I2C_VIAI2C_COMMON_H_
+#define __I2C_VIAI2C_COMMON_H_
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
+/* REG_CR Bit fields */
+#define VIAI2C_REG_CR		0x00
+#define VIAI2C_CR_ENABLE		BIT(0)
+#define VIAI2C_CR_RX_END		BIT(1)
+#define VIAI2C_CR_TX_END		BIT(2)
+#define VIAI2C_CR_CPU_RDY		BIT(3)
+#define VIAI2C_CR_END_MASK		GENMASK(2, 1)
+
+/* REG_TCR Bit fields */
+#define VIAI2C_REG_TCR		0x02
+#define VIAI2C_TCR_HS_MODE		BIT(13)
+#define VIAI2C_TCR_READ			BIT(14)
+#define VIAI2C_TCR_FAST			BIT(15)
+#define VIAI2C_TCR_ADDR_MASK		GENMASK(6, 0)
+
+/* REG_CSR Bit fields */
+#define VIAI2C_REG_CSR		0x04
+#define VIAI2C_CSR_RCV_NOT_ACK		BIT(0)
+#define VIAI2C_CSR_RCV_ACK_MASK		BIT(0)
+#define VIAI2C_CSR_READY_MASK		BIT(1)
+
+/* REG_ISR Bit fields */
+#define VIAI2C_REG_ISR		0x06
+#define VIAI2C_ISR_NACK_ADDR		BIT(0)
+#define VIAI2C_ISR_BYTE_END		BIT(1)
+#define VIAI2C_ISR_SCL_TIMEOUT		BIT(2)
+#define VIAI2C_ISR_MASK_ALL		GENMASK(2, 0)
+
+/* REG_IMR Bit fields */
+#define VIAI2C_REG_IMR		0x08
+#define VIAI2C_IMR_BYTE			BIT(1)
+#define VIAI2C_IMR_ENABLE_ALL		GENMASK(2, 0)
+
+#define VIAI2C_REG_CDR		0x0A
+#define VIAI2C_REG_TR		0x0C
+#define VIAI2C_REG_MCR		0x0E
+
+#define VIAI2C_TIMEOUT		(msecs_to_jiffies(1000))
+
+enum {
+	VIAI2C_PLAT_WMT,
+	VIAI2C_PLAT_ZHAOXIN
+};
+
+enum {
+	VIAI2C_BYTE_MODE,
+	VIAI2C_FIFO_MODE
+};
+
+struct viai2c {
+	struct i2c_adapter	adapter;
+	struct completion	complete;
+	struct device		*dev;
+	void __iomem		*base;
+	struct clk		*clk;
+	u16			tcr;
+	int			irq;
+	u16			xfered_len;
+	struct i2c_msg		*msg;
+	int			ret;
+	bool			last;
+	unsigned int		mode;
+	unsigned int		platform;
+	void			*pltfm_priv;
+};
+
+int viai2c_wait_bus_not_busy(struct viai2c *i2c);
+int viai2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num);
+int viai2c_init(struct platform_device *pdev, struct viai2c **pi2c, int plat);
+int viai2c_fifo_irq_xfer(struct viai2c *i2c, bool irq);
+
+#endif
--- a/drivers/i2c/busses/i2c-viai2c-wmt.c
+++ b/drivers/i2c/busses/i2c-viai2c-wmt.c
@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Wondermedia I2C Master Mode Driver
+ *
+ *  Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ *  Derived from GPLv2+ licensed source:
+ *  - Copyright (C) 2008 WonderMedia Technologies, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include "i2c-viai2c-common.h"
+
+#define REG_SLAVE_CR	0x10
+#define REG_SLAVE_SR	0x12
+#define REG_SLAVE_ISR	0x14
+#define REG_SLAVE_IMR	0x16
+#define REG_SLAVE_DR	0x18
+#define REG_SLAVE_TR	0x1A
+
+/* REG_TR */
+#define SCL_TIMEOUT(x)		(((x) & 0xFF) << 8)
+#define TR_STD			0x0064
+#define TR_HS			0x0019
+
+/* REG_MCR */
+#define MCR_APB_96M		7
+#define MCR_APB_166M		12
+
+static u32 wmt_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm wmt_i2c_algo = {
+	.master_xfer	= viai2c_xfer,
+	.functionality	= wmt_i2c_func,
+};
+
+static int wmt_i2c_reset_hardware(struct viai2c *i2c)
+{
+	int err;
+
+	err = clk_prepare_enable(i2c->clk);
+	if (err) {
+		dev_err(i2c->dev, "failed to enable clock\n");
+		return err;
+	}
+
+	err = clk_set_rate(i2c->clk, 20000000);
+	if (err) {
+		dev_err(i2c->dev, "failed to set clock = 20Mhz\n");
+		clk_disable_unprepare(i2c->clk);
+		return err;
+	}
+
+	writew(0, i2c->base + VIAI2C_REG_CR);
+	writew(MCR_APB_166M, i2c->base + VIAI2C_REG_MCR);
+	writew(VIAI2C_ISR_MASK_ALL, i2c->base + VIAI2C_REG_ISR);
+	writew(VIAI2C_IMR_ENABLE_ALL, i2c->base + VIAI2C_REG_IMR);
+	writew(VIAI2C_CR_ENABLE, i2c->base + VIAI2C_REG_CR);
+	readw(i2c->base + VIAI2C_REG_CSR);		/* read clear */
+	writew(VIAI2C_ISR_MASK_ALL, i2c->base + VIAI2C_REG_ISR);
+
+	if (i2c->tcr == VIAI2C_TCR_FAST)
+		writew(SCL_TIMEOUT(128) | TR_HS, i2c->base + VIAI2C_REG_TR);
+	else
+		writew(SCL_TIMEOUT(128) | TR_STD, i2c->base + VIAI2C_REG_TR);
+
+	return 0;
+}
+
+static int wmt_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct viai2c *i2c;
+	struct i2c_adapter *adap;
+	int err;
+	u32 clk_rate;
+
+	err = viai2c_init(pdev, &i2c, VIAI2C_PLAT_WMT);
+	if (err)
+		return err;
+
+	i2c->clk = of_clk_get(np, 0);
+	if (IS_ERR(i2c->clk)) {
+		dev_err(&pdev->dev, "unable to request clock\n");
+		return PTR_ERR(i2c->clk);
+	}
+
+	err = of_property_read_u32(np, "clock-frequency", &clk_rate);
+	if (!err && clk_rate == I2C_MAX_FAST_MODE_FREQ)
+		i2c->tcr = VIAI2C_TCR_FAST;
+
+	adap = &i2c->adapter;
+	i2c_set_adapdata(adap, i2c);
+	strscpy(adap->name, "WMT I2C adapter", sizeof(adap->name));
+	adap->owner = THIS_MODULE;
+	adap->algo = &wmt_i2c_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	err = wmt_i2c_reset_hardware(i2c);
+	if (err) {
+		dev_err(&pdev->dev, "error initializing hardware\n");
+		return err;
+	}
+
+	err = i2c_add_adapter(adap);
+	if (err)
+		/* wmt_i2c_reset_hardware() enables i2c_dev->clk */
+		clk_disable_unprepare(i2c->clk);
+
+	return err;
+}
+
+static void wmt_i2c_remove(struct platform_device *pdev)
+{
+	struct viai2c *i2c = platform_get_drvdata(pdev);
+
+	/* Disable interrupts, clock and delete adapter */
+	writew(0, i2c->base + VIAI2C_REG_IMR);
+	clk_disable_unprepare(i2c->clk);
+	i2c_del_adapter(&i2c->adapter);
+}
+
+static const struct of_device_id wmt_i2c_dt_ids[] = {
+	{ .compatible = "wm,wm8505-i2c" },
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver wmt_i2c_driver = {
+	.probe		= wmt_i2c_probe,
+	.remove_new	= wmt_i2c_remove,
+	.driver		= {
+		.name	= "wmt-i2c",
+		.of_match_table = wmt_i2c_dt_ids,
+	},
+};
+
+module_platform_driver(wmt_i2c_driver);
+
+MODULE_DESCRIPTION("Wondermedia I2C master-mode bus adapter");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, wmt_i2c_dt_ids);
--- a/drivers/i2c/busses/i2c-viai2c-zhaoxin.c
+++ b/drivers/i2c/busses/i2c-viai2c-zhaoxin.c
@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright(c) 2024 Shanghai Zhaoxin Semiconductor Corporation.
+ *                    All rights reserved.
+ */
+
+#include <linux/acpi.h>
+#include "i2c-viai2c-common.h"
+
+/*
+ * registers
+ */
+/* Zhaoxin specific register bit fields */
+/* REG_CR Bit fields */
+#define   ZXI2C_CR_MST_RST		BIT(7)
+#define   ZXI2C_CR_FIFO_MODE		BIT(14)
+/* REG_ISR/IMR Bit fields */
+#define   ZXI2C_IRQ_FIFONACK		BIT(4)
+#define   ZXI2C_IRQ_FIFOEND		BIT(3)
+#define   ZXI2C_IRQ_MASK		(VIAI2C_ISR_MASK_ALL \
+					| ZXI2C_IRQ_FIFOEND \
+					| ZXI2C_IRQ_FIFONACK)
+/* Zhaoxin specific registers */
+#define ZXI2C_REG_CLK		0x10
+#define   ZXI2C_CLK_50M			BIT(0)
+#define ZXI2C_REG_REV		0x11
+#define ZXI2C_REG_HCR		0x12
+#define   ZXI2C_HCR_RST_FIFO		GENMASK(1, 0)
+#define ZXI2C_REG_HTDR		0x13
+#define ZXI2C_REG_HRDR		0x14
+#define ZXI2C_REG_HTLR		0x15
+#define ZXI2C_REG_HRLR		0x16
+#define ZXI2C_REG_HWCNTR	0x18
+#define ZXI2C_REG_HRCNTR	0x19
+
+/* parameters Constants */
+#define ZXI2C_GOLD_FSTP_100K	0xF3
+#define ZXI2C_GOLD_FSTP_400K	0x38
+#define ZXI2C_GOLD_FSTP_1M	0x13
+#define ZXI2C_GOLD_FSTP_3400K	0x37
+#define ZXI2C_HS_MASTER_CODE	(0x08 << 8)
+
+#define ZXI2C_FIFO_SIZE		32
+
+struct viai2c_zhaoxin {
+	u8			hrv;
+	u16			tr;
+	u16			mcr;
+	u16			xfer_len;
+};
+
+/* 'irq == true' means in interrupt context */
+int viai2c_fifo_irq_xfer(struct viai2c *i2c, bool irq)
+{
+	u16 i;
+	u8 tmp;
+	struct i2c_msg *msg = i2c->msg;
+	void __iomem *base = i2c->base;
+	bool read = !!(msg->flags & I2C_M_RD);
+	struct viai2c_zhaoxin *priv = i2c->pltfm_priv;
+
+	if (irq) {
+		/* get the received data */
+		if (read)
+			for (i = 0; i < priv->xfer_len; i++)
+				msg->buf[i2c->xfered_len + i] = ioread8(base + ZXI2C_REG_HRDR);
+
+		i2c->xfered_len += priv->xfer_len;
+		if (i2c->xfered_len == msg->len)
+			return 1;
+	}
+
+	/* reset fifo buffer */
+	tmp = ioread8(base + ZXI2C_REG_HCR);
+	iowrite8(tmp | ZXI2C_HCR_RST_FIFO, base + ZXI2C_REG_HCR);
+
+	/* set xfer len */
+	priv->xfer_len = min_t(u16, msg->len - i2c->xfered_len, ZXI2C_FIFO_SIZE);
+	if (read) {
+		iowrite8(priv->xfer_len - 1, base + ZXI2C_REG_HRLR);
+	} else {
+		iowrite8(priv->xfer_len - 1, base + ZXI2C_REG_HTLR);
+		/* set write data */
+		for (i = 0; i < priv->xfer_len; i++)
+			iowrite8(msg->buf[i2c->xfered_len + i], base + ZXI2C_REG_HTDR);
+	}
+
+	/* prepare to stop transmission */
+	if (priv->hrv && msg->len == (i2c->xfered_len + priv->xfer_len)) {
+		tmp = ioread8(base + VIAI2C_REG_CR);
+		tmp |= read ? VIAI2C_CR_RX_END : VIAI2C_CR_TX_END;
+		iowrite8(tmp, base + VIAI2C_REG_CR);
+	}
+
+	if (irq) {
+		/* continue transmission */
+		tmp = ioread8(base + VIAI2C_REG_CR);
+		iowrite8(tmp |= VIAI2C_CR_CPU_RDY, base + VIAI2C_REG_CR);
+	} else {
+		u16 tcr_val = i2c->tcr;
+
+		/* start transmission */
+		tcr_val |= read ? VIAI2C_TCR_READ : 0;
+		writew(tcr_val | msg->addr, base + VIAI2C_REG_TCR);
+	}
+
+	return 0;
+}
+
+static int zxi2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	u8 tmp;
+	int ret;
+	struct viai2c *i2c = (struct viai2c *)i2c_get_adapdata(adap);
+	struct viai2c_zhaoxin *priv = i2c->pltfm_priv;
+	void __iomem *base = i2c->base;
+
+	ret = viai2c_wait_bus_not_busy(i2c);
+	if (ret)
+		return ret;
+
+	tmp = ioread8(base + VIAI2C_REG_CR);
+	tmp &= ~(VIAI2C_CR_RX_END | VIAI2C_CR_TX_END);
+
+	if (num == 1 && msgs->len >= 2 && (priv->hrv || msgs->len <= ZXI2C_FIFO_SIZE)) {
+		/* enable fifo mode */
+		iowrite16(ZXI2C_CR_FIFO_MODE | tmp, base + VIAI2C_REG_CR);
+		/* clear irq status */
+		iowrite8(ZXI2C_IRQ_MASK, base + VIAI2C_REG_ISR);
+		/* enable fifo irq */
+		iowrite8(VIAI2C_ISR_NACK_ADDR | ZXI2C_IRQ_FIFOEND, base + VIAI2C_REG_IMR);
+
+		i2c->msg = msgs;
+		i2c->mode = VIAI2C_FIFO_MODE;
+		priv->xfer_len = 0;
+		i2c->xfered_len = 0;
+
+		viai2c_fifo_irq_xfer(i2c, 0);
+
+		if (!wait_for_completion_timeout(&i2c->complete, VIAI2C_TIMEOUT))
+			return -ETIMEDOUT;
+
+		ret = i2c->ret;
+	} else {
+		/* enable byte mode */
+		iowrite16(tmp, base + VIAI2C_REG_CR);
+		/* clear irq status */
+		iowrite8(ZXI2C_IRQ_MASK, base + VIAI2C_REG_ISR);
+		/* enable byte irq */
+		iowrite8(VIAI2C_ISR_NACK_ADDR | VIAI2C_IMR_BYTE, base + VIAI2C_REG_IMR);
+
+		ret = viai2c_xfer(adap, msgs, num);
+		if (ret == -ETIMEDOUT)
+			iowrite16(tmp | VIAI2C_CR_END_MASK, base + VIAI2C_REG_CR);
+	}
+	/* dis interrupt */
+	iowrite8(0, base + VIAI2C_REG_IMR);
+
+	return ret;
+}
+
+static u32 zxi2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm zxi2c_algorithm = {
+	.master_xfer	= zxi2c_master_xfer,
+	.functionality	= zxi2c_func,
+};
+
+static const struct i2c_adapter_quirks zxi2c_quirks = {
+	.flags = I2C_AQ_NO_ZERO_LEN | I2C_AQ_COMB_WRITE_THEN_READ,
+};
+
+static const u32 zxi2c_speed_params_table[][3] = {
+	/* speed, ZXI2C_TCR, ZXI2C_FSTP */
+	{ I2C_MAX_STANDARD_MODE_FREQ, 0, ZXI2C_GOLD_FSTP_100K },
+	{ I2C_MAX_FAST_MODE_FREQ, VIAI2C_TCR_FAST, ZXI2C_GOLD_FSTP_400K },
+	{ I2C_MAX_FAST_MODE_PLUS_FREQ, VIAI2C_TCR_FAST, ZXI2C_GOLD_FSTP_1M },
+	{ I2C_MAX_HIGH_SPEED_MODE_FREQ, VIAI2C_TCR_HS_MODE | VIAI2C_TCR_FAST,
+	  ZXI2C_GOLD_FSTP_3400K },
+};
+
+static void zxi2c_set_bus_speed(struct viai2c *i2c)
+{
+	struct viai2c_zhaoxin *priv = i2c->pltfm_priv;
+
+	iowrite16(priv->tr, i2c->base + VIAI2C_REG_TR);
+	iowrite8(ZXI2C_CLK_50M, i2c->base + ZXI2C_REG_CLK);
+	iowrite16(priv->mcr, i2c->base + VIAI2C_REG_MCR);
+}
+
+static void zxi2c_get_bus_speed(struct viai2c *i2c)
+{
+	u8 i, count;
+	u8 fstp;
+	const u32 *params;
+	struct viai2c_zhaoxin *priv = i2c->pltfm_priv;
+	u32 acpi_speed = i2c_acpi_find_bus_speed(i2c->dev);
+
+	count = ARRAY_SIZE(zxi2c_speed_params_table);
+	for (i = 0; i < count; i++)
+		if (acpi_speed == zxi2c_speed_params_table[i][0])
+			break;
+	/* if not found, use 400k as default */
+	i = i < count ? i : 1;
+
+	params = zxi2c_speed_params_table[i];
+	fstp = ioread8(i2c->base + VIAI2C_REG_TR);
+	if (abs(fstp - params[2]) > 0x10) {
+		/*
+		 * if BIOS setting value far from golden value,
+		 * use golden value and warn user
+		 */
+		dev_warn(i2c->dev, "FW FSTP[%x] might cause wrong timings, dropped\n", fstp);
+		priv->tr = params[2] | 0xff00;
+	} else {
+		priv->tr = fstp | 0xff00;
+	}
+
+	i2c->tcr = params[1];
+	priv->mcr = ioread16(i2c->base + VIAI2C_REG_MCR);
+	/* for Hs-mode, use 0x80 as master code */
+	if (params[0] == I2C_MAX_HIGH_SPEED_MODE_FREQ)
+		priv->mcr |= ZXI2C_HS_MASTER_CODE;
+
+	dev_info(i2c->dev, "speed mode is %s\n", i2c_freq_mode_string(params[0]));
+}
+
+static int zxi2c_probe(struct platform_device *pdev)
+{
+	int error;
+	struct viai2c *i2c;
+	struct i2c_adapter *adap;
+	struct viai2c_zhaoxin *priv;
+
+	error = viai2c_init(pdev, &i2c, VIAI2C_PLAT_ZHAOXIN);
+	if (error)
+		return error;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	i2c->pltfm_priv = priv;
+
+	zxi2c_get_bus_speed(i2c);
+	zxi2c_set_bus_speed(i2c);
+
+	priv->hrv = ioread8(i2c->base + ZXI2C_REG_REV);
+
+	adap = &i2c->adapter;
+	adap->owner = THIS_MODULE;
+	adap->algo = &zxi2c_algorithm;
+	adap->quirks = &zxi2c_quirks;
+	adap->dev.parent = &pdev->dev;
+	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
+	snprintf(adap->name, sizeof(adap->name), "zhaoxin-%s-%s",
+		 dev_name(pdev->dev.parent), dev_name(i2c->dev));
+	i2c_set_adapdata(adap, i2c);
+
+	return devm_i2c_add_adapter(&pdev->dev, adap);
+}
+
+static int __maybe_unused zxi2c_resume(struct device *dev)
+{
+	struct viai2c *i2c = dev_get_drvdata(dev);
+
+	iowrite8(ZXI2C_CR_MST_RST, i2c->base + VIAI2C_REG_CR);
+	zxi2c_set_bus_speed(i2c);
+
+	return 0;
+}
+
+static const struct dev_pm_ops zxi2c_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(NULL, zxi2c_resume)
+};
+
+static const struct acpi_device_id zxi2c_acpi_match[] = {
+	{"IIC1D17", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, zxi2c_acpi_match);
+
+static struct platform_driver zxi2c_driver = {
+	.probe = zxi2c_probe,
+	.driver = {
+		.name = "i2c_zhaoxin",
+		.acpi_match_table = zxi2c_acpi_match,
+		.pm = &zxi2c_pm,
+	},
+};
+
+module_platform_driver(zxi2c_driver);
+
+MODULE_AUTHOR("HansHu@zhaoxin.com");
+MODULE_DESCRIPTION("Shanghai Zhaoxin IIC driver");
+MODULE_LICENSE("GPL");
--- a/drivers/i2c/busses/i2c-viperboard.c
+++ b/drivers/i2c/busses/i2c-viperboard.c
@ -416,7 +416,6 @@ static void vprbrd_i2c_remove(struct platform_device *pdev)

 static struct platform_driver vprbrd_i2c_driver = {
 	.driver.name	= "viperboard-i2c",
-	.driver.owner	= THIS_MODULE,
 	.probe		= vprbrd_i2c_probe,
 	.remove_new	= vprbrd_i2c_remove,
 };
--- a/drivers/i2c/busses/i2c-wmt.c
+++ b/drivers/i2c/busses/i2c-wmt.c
@ -1,421 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Wondermedia I2C Master Mode Driver
- *
- *  Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- *  Derived from GPLv2+ licensed source:
- *  - Copyright (C) 2008 WonderMedia Technologies, Inc.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-
-#define REG_CR		0x00
-#define REG_TCR		0x02
-#define REG_CSR		0x04
-#define REG_ISR		0x06
-#define REG_IMR		0x08
-#define REG_CDR		0x0A
-#define REG_TR		0x0C
-#define REG_MCR		0x0E
-#define REG_SLAVE_CR	0x10
-#define REG_SLAVE_SR	0x12
-#define REG_SLAVE_ISR	0x14
-#define REG_SLAVE_IMR	0x16
-#define REG_SLAVE_DR	0x18
-#define REG_SLAVE_TR	0x1A
-
-/* REG_CR Bit fields */
-#define CR_TX_NEXT_ACK		0x0000
-#define CR_ENABLE		0x0001
-#define CR_TX_NEXT_NO_ACK	0x0002
-#define CR_TX_END		0x0004
-#define CR_CPU_RDY		0x0008
-#define SLAV_MODE_SEL		0x8000
-
-/* REG_TCR Bit fields */
-#define TCR_STANDARD_MODE	0x0000
-#define TCR_MASTER_WRITE	0x0000
-#define TCR_HS_MODE		0x2000
-#define TCR_MASTER_READ		0x4000
-#define TCR_FAST_MODE		0x8000
-#define TCR_SLAVE_ADDR_MASK	0x007F
-
-/* REG_ISR Bit fields */
-#define ISR_NACK_ADDR		0x0001
-#define ISR_BYTE_END		0x0002
-#define ISR_SCL_TIMEOUT		0x0004
-#define ISR_WRITE_ALL		0x0007
-
-/* REG_IMR Bit fields */
-#define IMR_ENABLE_ALL		0x0007
-
-/* REG_CSR Bit fields */
-#define CSR_RCV_NOT_ACK		0x0001
-#define CSR_RCV_ACK_MASK	0x0001
-#define CSR_READY_MASK		0x0002
-
-/* REG_TR */
-#define SCL_TIMEOUT(x)		(((x) & 0xFF) << 8)
-#define TR_STD			0x0064
-#define TR_HS			0x0019
-
-/* REG_MCR */
-#define MCR_APB_96M		7
-#define MCR_APB_166M		12
-
-#define WMT_I2C_TIMEOUT		(msecs_to_jiffies(1000))
-
-struct wmt_i2c_dev {
-	struct i2c_adapter	adapter;
-	struct completion	complete;
-	struct device		*dev;
-	void __iomem		*base;
-	struct clk		*clk;
-	u16			tcr;
-	int			irq;
-	u16			cmd_status;
-};
-
-static int wmt_i2c_wait_bus_not_busy(struct wmt_i2c_dev *i2c_dev)
-{
-	unsigned long timeout;
-
-	timeout = jiffies + WMT_I2C_TIMEOUT;
-	while (!(readw(i2c_dev->base + REG_CSR) & CSR_READY_MASK)) {
-		if (time_after(jiffies, timeout)) {
-			dev_warn(i2c_dev->dev, "timeout waiting for bus ready\n");
-			return -EBUSY;
-		}
-		msleep(20);
-	}
-
-	return 0;
-}
-
-static int wmt_check_status(struct wmt_i2c_dev *i2c_dev)
-{
-	int ret = 0;
-	unsigned long wait_result;
-
-	wait_result = wait_for_completion_timeout(&i2c_dev->complete,
-						msecs_to_jiffies(500));
-	if (!wait_result)
-		return -ETIMEDOUT;
-
-	if (i2c_dev->cmd_status & ISR_NACK_ADDR)
-		ret = -EIO;
-
-	if (i2c_dev->cmd_status & ISR_SCL_TIMEOUT)
-		ret = -ETIMEDOUT;
-
-	return ret;
-}
-
-static int wmt_i2c_write(struct wmt_i2c_dev *i2c_dev, struct i2c_msg *pmsg,
-			 int last)
-{
-	u16 val, tcr_val = i2c_dev->tcr;
-	int ret;
-	int xfer_len = 0;
-
-	if (pmsg->len == 0) {
-		/*
-		 * We still need to run through the while (..) once, so
-		 * start at -1 and break out early from the loop
-		 */
-		xfer_len = -1;
-		writew(0, i2c_dev->base + REG_CDR);
-	} else {
-		writew(pmsg->buf[0] & 0xFF, i2c_dev->base + REG_CDR);
-	}
-
-	if (!(pmsg->flags & I2C_M_NOSTART)) {
-		val = readw(i2c_dev->base + REG_CR);
-		val &= ~CR_TX_END;
-		val |= CR_CPU_RDY;
-		writew(val, i2c_dev->base + REG_CR);
-	}
-
-	reinit_completion(&i2c_dev->complete);
-
-	tcr_val |= (TCR_MASTER_WRITE | (pmsg->addr & TCR_SLAVE_ADDR_MASK));
-
-	writew(tcr_val, i2c_dev->base + REG_TCR);
-
-	if (pmsg->flags & I2C_M_NOSTART) {
-		val = readw(i2c_dev->base + REG_CR);
-		val |= CR_CPU_RDY;
-		writew(val, i2c_dev->base + REG_CR);
-	}
-
-	while (xfer_len < pmsg->len) {
-		ret = wmt_check_status(i2c_dev);
-		if (ret)
-			return ret;
-
-		xfer_len++;
-
-		val = readw(i2c_dev->base + REG_CSR);
-		if ((val & CSR_RCV_ACK_MASK) == CSR_RCV_NOT_ACK) {
-			dev_dbg(i2c_dev->dev, "write RCV NACK error\n");
-			return -EIO;
-		}
-
-		if (pmsg->len == 0) {
-			val = CR_TX_END | CR_CPU_RDY | CR_ENABLE;
-			writew(val, i2c_dev->base + REG_CR);
-			break;
-		}
-
-		if (xfer_len == pmsg->len) {
-			if (last != 1)
-				writew(CR_ENABLE, i2c_dev->base + REG_CR);
-		} else {
-			writew(pmsg->buf[xfer_len] & 0xFF, i2c_dev->base +
-								REG_CDR);
-			writew(CR_CPU_RDY | CR_ENABLE, i2c_dev->base + REG_CR);
-		}
-	}
-
-	return 0;
-}
-
-static int wmt_i2c_read(struct wmt_i2c_dev *i2c_dev, struct i2c_msg *pmsg)
-{
-	u16 val, tcr_val = i2c_dev->tcr;
-	int ret;
-	u32 xfer_len = 0;
-
-	val = readw(i2c_dev->base + REG_CR);
-	val &= ~(CR_TX_END | CR_TX_NEXT_NO_ACK);
-
-	if (!(pmsg->flags & I2C_M_NOSTART))
-		val |= CR_CPU_RDY;
-
-	if (pmsg->len == 1)
-		val |= CR_TX_NEXT_NO_ACK;
-
-	writew(val, i2c_dev->base + REG_CR);
-
-	reinit_completion(&i2c_dev->complete);
-
-	tcr_val |= TCR_MASTER_READ | (pmsg->addr & TCR_SLAVE_ADDR_MASK);
-
-	writew(tcr_val, i2c_dev->base + REG_TCR);
-
-	if (pmsg->flags & I2C_M_NOSTART) {
-		val = readw(i2c_dev->base + REG_CR);
-		val |= CR_CPU_RDY;
-		writew(val, i2c_dev->base + REG_CR);
-	}
-
-	while (xfer_len < pmsg->len) {
-		ret = wmt_check_status(i2c_dev);
-		if (ret)
-			return ret;
-
-		pmsg->buf[xfer_len] = readw(i2c_dev->base + REG_CDR) >> 8;
-		xfer_len++;
-
-		val = readw(i2c_dev->base + REG_CR) | CR_CPU_RDY;
-		if (xfer_len == pmsg->len - 1)
-			val |= CR_TX_NEXT_NO_ACK;
-		writew(val, i2c_dev->base + REG_CR);
-	}
-
-	return 0;
-}
-
-static int wmt_i2c_xfer(struct i2c_adapter *adap,
-			struct i2c_msg msgs[],
-			int num)
-{
-	struct i2c_msg *pmsg;
-	int i;
-	int ret = 0;
-	struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
-
-	for (i = 0; ret >= 0 && i < num; i++) {
-		pmsg = &msgs[i];
-		if (!(pmsg->flags & I2C_M_NOSTART)) {
-			ret = wmt_i2c_wait_bus_not_busy(i2c_dev);
-			if (ret < 0)
-				return ret;
-		}
-
-		if (pmsg->flags & I2C_M_RD)
-			ret = wmt_i2c_read(i2c_dev, pmsg);
-		else
-			ret = wmt_i2c_write(i2c_dev, pmsg, (i + 1) == num);
-	}
-
-	return (ret < 0) ? ret : i;
-}
-
-static u32 wmt_i2c_func(struct i2c_adapter *adap)
-{
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART;
-}
-
-static const struct i2c_algorithm wmt_i2c_algo = {
-	.master_xfer	= wmt_i2c_xfer,
-	.functionality	= wmt_i2c_func,
-};
-
-static irqreturn_t wmt_i2c_isr(int irq, void *data)
-{
-	struct wmt_i2c_dev *i2c_dev = data;
-
-	/* save the status and write-clear it */
-	i2c_dev->cmd_status = readw(i2c_dev->base + REG_ISR);
-	writew(i2c_dev->cmd_status, i2c_dev->base + REG_ISR);
-
-	complete(&i2c_dev->complete);
-
-	return IRQ_HANDLED;
-}
-
-static int wmt_i2c_reset_hardware(struct wmt_i2c_dev *i2c_dev)
-{
-	int err;
-
-	err = clk_prepare_enable(i2c_dev->clk);
-	if (err) {
-		dev_err(i2c_dev->dev, "failed to enable clock\n");
-		return err;
-	}
-
-	err = clk_set_rate(i2c_dev->clk, 20000000);
-	if (err) {
-		dev_err(i2c_dev->dev, "failed to set clock = 20Mhz\n");
-		clk_disable_unprepare(i2c_dev->clk);
-		return err;
-	}
-
-	writew(0, i2c_dev->base + REG_CR);
-	writew(MCR_APB_166M, i2c_dev->base + REG_MCR);
-	writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
-	writew(IMR_ENABLE_ALL, i2c_dev->base + REG_IMR);
-	writew(CR_ENABLE, i2c_dev->base + REG_CR);
-	readw(i2c_dev->base + REG_CSR);		/* read clear */
-	writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
-
-	if (i2c_dev->tcr == TCR_FAST_MODE)
-		writew(SCL_TIMEOUT(128) | TR_HS, i2c_dev->base + REG_TR);
-	else
-		writew(SCL_TIMEOUT(128) | TR_STD, i2c_dev->base + REG_TR);
-
-	return 0;
-}
-
-static int wmt_i2c_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	struct wmt_i2c_dev *i2c_dev;
-	struct i2c_adapter *adap;
-	int err;
-	u32 clk_rate;
-
-	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
-	if (!i2c_dev)
-		return -ENOMEM;
-
-	i2c_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
-	if (IS_ERR(i2c_dev->base))
-		return PTR_ERR(i2c_dev->base);
-
-	i2c_dev->irq = irq_of_parse_and_map(np, 0);
-	if (!i2c_dev->irq) {
-		dev_err(&pdev->dev, "irq missing or invalid\n");
-		return -EINVAL;
-	}
-
-	i2c_dev->clk = of_clk_get(np, 0);
-	if (IS_ERR(i2c_dev->clk)) {
-		dev_err(&pdev->dev, "unable to request clock\n");
-		return PTR_ERR(i2c_dev->clk);
-	}
-
-	err = of_property_read_u32(np, "clock-frequency", &clk_rate);
-	if (!err && (clk_rate == I2C_MAX_FAST_MODE_FREQ))
-		i2c_dev->tcr = TCR_FAST_MODE;
-
-	i2c_dev->dev = &pdev->dev;
-
-	err = devm_request_irq(&pdev->dev, i2c_dev->irq, wmt_i2c_isr, 0,
-							"i2c", i2c_dev);
-	if (err) {
-		dev_err(&pdev->dev, "failed to request irq %i\n", i2c_dev->irq);
-		return err;
-	}
-
-	adap = &i2c_dev->adapter;
-	i2c_set_adapdata(adap, i2c_dev);
-	strscpy(adap->name, "WMT I2C adapter", sizeof(adap->name));
-	adap->owner = THIS_MODULE;
-	adap->algo = &wmt_i2c_algo;
-	adap->dev.parent = &pdev->dev;
-	adap->dev.of_node = pdev->dev.of_node;
-
-	init_completion(&i2c_dev->complete);
-
-	err = wmt_i2c_reset_hardware(i2c_dev);
-	if (err) {
-		dev_err(&pdev->dev, "error initializing hardware\n");
-		return err;
-	}
-
-	err = i2c_add_adapter(adap);
-	if (err)
-		goto err_disable_clk;
-
-	platform_set_drvdata(pdev, i2c_dev);
-
-	return 0;
-
-err_disable_clk:
-	clk_disable_unprepare(i2c_dev->clk);
-	return err;
-}
-
-static void wmt_i2c_remove(struct platform_device *pdev)
-{
-	struct wmt_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
-
-	/* Disable interrupts, clock and delete adapter */
-	writew(0, i2c_dev->base + REG_IMR);
-	clk_disable_unprepare(i2c_dev->clk);
-	i2c_del_adapter(&i2c_dev->adapter);
-}
-
-static const struct of_device_id wmt_i2c_dt_ids[] = {
-	{ .compatible = "wm,wm8505-i2c" },
-	{ /* Sentinel */ },
-};
-
-static struct platform_driver wmt_i2c_driver = {
-	.probe		= wmt_i2c_probe,
-	.remove_new	= wmt_i2c_remove,
-	.driver		= {
-		.name	= "wmt-i2c",
-		.of_match_table = wmt_i2c_dt_ids,
-	},
-};
-
-module_platform_driver(wmt_i2c_driver);
-
-MODULE_DESCRIPTION("Wondermedia I2C master-mode bus adapter");
-MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(of, wmt_i2c_dt_ids);
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@ -206,9 +206,8 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)

 	for (i = 0; i < mux->data.n_values; i++) {
 		u32 nr = mux->data.base_nr ? (mux->data.base_nr + i) : 0;
-		unsigned int class = mux->data.classes ? mux->data.classes[i] : 0;

-		ret = i2c_mux_add_adapter(muxc, nr, mux->data.values[i], class);
+		ret = i2c_mux_add_adapter(muxc, nr, mux->data.values[i], 0);
 		if (ret)
 			goto add_adapter_failed;
 	}
--- a/include/linux/platform_data/i2c-mux-gpio.h
+++ b/include/linux/platform_data/i2c-mux-gpio.h
@ -18,7 +18,6 @@
 * @values: Array of bitmasks of GPIO settings (low/high) for each
 *	position
 * @n_values: Number of multiplexer positions (busses to instantiate)
- * @classes: Optional I2C auto-detection classes
 * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used
 */
 struct i2c_mux_gpio_platform_data {
@ -26,7 +25,6 @@ struct i2c_mux_gpio_platform_data {
 	int base_nr;
 	const unsigned *values;
 	int n_values;
-	const unsigned *classes;
 	unsigned idle;
 };