1

dt-bindings: usb: Add binding for TI USB8020B hub controller

The TI USB8020B is a USB 3.0 hub controller with 2 ports.

This initial version of the binding only describes USB related aspects
of the USB8020B, it does not cover the option of connecting the controller
as an i2c slave.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20240227090228.22156-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Macpaul Lin 2024-02-27 17:02:27 +08:00 committed by Greg Kroah-Hartman
parent 2e02117928
commit 0842b8feb4

View File

@ -0,0 +1,69 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI USB8020B USB 3.0 hub controller
maintainers:
- Macpaul Lin <macpaul.lin@mediatek.com>
allOf:
- $ref: usb-device.yaml#
properties:
compatible:
enum:
- usb451,8025
- usb451,8027
reg: true
reset-gpios:
items:
- description: GPIO specifier for GRST# pin.
vdd-supply:
description:
VDD power supply to the hub
peer-hub:
$ref: /schemas/types.yaml#/definitions/phandle
description:
phandle to the peer hub on the controller.
required:
- compatible
- reg
- peer-hub
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
usb {
dr_mode = "host";
#address-cells = <1>;
#size-cells = <0>;
/* 2.0 hub on port 1 */
hub_2_0: hub@1 {
compatible = "usb451,8027";
reg = <1>;
peer-hub = <&hub_3_0>;
reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
vdd-supply = <&usb_hub_fixed_3v3>;
};
/* 3.0 hub on port 2 */
hub_3_0: hub@2 {
compatible = "usb451,8025";
reg = <2>;
peer-hub = <&hub_2_0>;
reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
vdd-supply = <&usb_hub_fixed_3v3>;
};
};