kevin/linux
1
Fork 0
Code
fdaf8b3183
linux/drivers/usb/host/Makefile

40 lines
1.2 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#
[PATCH] USB: move handoff code This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-)
2005-09-23 17:14:37 -07:00
# Makefile for USB Host Controller Drivers
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 19:03:26 -07:00
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
[PATCH] USB: hcd uses EXTRA_CFLAGS for -DDEBUG This modifies the HCD builds to automatically "-DDEBUG" if CONFIG_USB_DEBUG is selected. It's just a minor source code cleanup, guaranteeing consistency. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-07 21:45:20 -07:00
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 19:03:26 -07:00
isp1760-y := isp1760-hcd.o isp1760-if.o
fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
usb/xhci: remove CONFIG_PCI in xhci.c's probe function This removes the need of ifdefs within the init function and with it the headache about the correct clean without bus X but with bus/platform Y & Z. xhci-pci is only compiled if CONFIG_PCI is selected which can be de-selected now without trouble. For now the result is kinda useless because we have no other glue code. However, since nobody is using USB_ARCH_HAS_XHCI then it should not be an issue :) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-23 14:20:02 -07:00
xhci-hcd-y := xhci.o xhci-mem.o
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 19:03:26 -07:00
xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
usb/xhci: remove CONFIG_PCI in xhci.c's probe function This removes the need of ifdefs within the init function and with it the headache about the correct clean without bus X but with bus/platform Y & Z. xhci-pci is only compiled if CONFIG_PCI is selected which can be de-selected now without trouble. For now the result is kinda useless because we have no other glue code. However, since nobody is using USB_ARCH_HAS_XHCI then it should not be an issue :) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-23 14:20:02 -07:00
xhci-hcd-$(CONFIG_PCI) += xhci-pci.o
USB: ISP1760 HCD driver This driver has been written from scratch and supports the ISP1760. ISP1761 might (should) work as well but the OTG isn't supported. Also ISO packets are not. However, it works on my little PowerPC board. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-23 15:37:04 -07:00
wusb: WHCI host controller driver A driver for Wireless USB host controllers that comply with the Wireless Host Controller Interface (HCI) specification as published by Intel. The latest publically available version of the specification (0.95) is supported (except for isochronous transfers). Build fixes by Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 08:34:28 -07:00
obj-$(CONFIG_USB_WHCI_HCD) += whci/
[PATCH] USB: move handoff code This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-)
2005-09-23 17:14:37 -07:00
obj-$(CONFIG_PCI) += pci-quirks.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
usb host: Oxford OXU210HP HCD driver. This driver implements the support for Oxford OXU210HP USB high-speed host, no peripheral nor OTG. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: Kan Liu <kan.k.liu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-23 01:08:07 -07:00
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
[PATCH] USB: Add isp116x-hcd USB host controller driver This patch provides an "isp116x-hcd" driver for Philips' ISP1160/ISP1161 USB host controllers. The driver: - is relatively small, meant for use on embedded platforms. - runs usbtests 1-14 without problems for days. - has been in use by 6-7 different people on ARM and PPC platforms, running a range of devices including USB hubs. - supports suspend/resume of both the platform device and the root hub; supports remote wakeup of the root hub (but NOT the platform device) by USB devices. - does NOT support ISO transfers (nobody has asked for them). - is PIO-only. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-09 12:57:39 -07:00
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
USB: NXP ISP1362 USB host driver Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-16 17:51:21 -07:00
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
USB: Driver for Freescale QUICC Engine USB Host Controller This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-09 19:03:21 -07:00
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
USB: xhci: rename driver to xhci_hcd Naming consistency with other USB HCDs. Signed-off-by: Alex Chiang <achiang@hp.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-16 13:48:45 -07:00
obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
[PATCH] USB: add sl811_cs support This adds support for a CF-card USB Host adapter, the Ratoc REX-CFU1U, by wrapping a PCMCIA driver around the existing "sl811-hcd" platform driver. This CF card is especially useful for PDAs, which currently tend to have no other solution for USB host capability. From: Botond Botyanszki <boti@rocketmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-26 05:55:55 -07:00
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
USB: u132-hcd: host controller driver for ELAN U132 adapter This "u132-hcd" module is one half of the "driver" for ELAN's U132 which is a USB to CardBus OHCI controller adapter. This module needs the "ftdi-elan" module in order to communicate to CardBus OHCI controller inserted into the U132 adapter. When the "ftdi-elan" module detects a supported CardBus OHCI controller in the U132 adapter it loads this "u132-hcd" module. Upon a successful device probe() the single workqueue is started up which does all the processing of commands from the USB core that implement the host controller. The workqueue maintains the urb queues and issues commands via the functions exported by the "ftdi-elan" module. Each such command will result in a callback. Note that the "ftdi-elan" module is a USB client driver. Note that this "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-13 03:27:35 -07:00
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
USB: r8a66597-hcd: host controller driver for R8A66597 I would like to submit Renesas R8A66597 USB HCD driver. R8A66597 is Renesas USB 2.0 host and peripheral combined controller device originally designed for embedded products. As a limitation of this device, it does not support externel hub more than 2 tier, and cannot communicate with a USB device more than 10. Then this device is not compatible with EHCI and/or OHCI, I wrote driver support patch based on sl811 code. This driver has the following unique specifications: - Implement transfer timeout to share one pipe with plural endpoint. - Detach detection of a USB device connected to externel hub. The driver has been tested external hub, usb-hdd, usb-cdrom, usb-speaker, mice, keyboard, and usbtest driver. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-09 21:18:19 -07:00
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
USB: ISP1760 HCD driver This driver has been written from scratch and supports the ISP1760. ISP1761 might (should) work as well but the OTG isn't supported. Also ISO packets are not. However, it works on my little PowerPC board. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-23 15:37:04 -07:00
obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
wusb: add HWA host controller driver Add a driver for Wireless USB host controllers connected via USB (a Host Wire Adapter or HWA). Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 08:34:30 -07:00
obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
USB: MXC: Add i.MX21 specific USB host controller driver. This driver is a Full / Low speed only USB host for the i.MX21. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-21 04:14:48 -07:00
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
USB: add platform glue driver for FSL USB DR controller Replace FSL USB platform code by simple platform driver for creation of FSL USB platform devices. The driver creates platform devices based on the information from USB nodes in the flat device tree. This is the replacement for old arch fsl_soc usb code removed by this patch. The driver uses usual of-style binding, available EHCI-HCD and UDC drivers can be bound to the created devices. The new of-style driver additionaly instantiates USB OTG platform device, as the appropriate USB OTG driver will be added soon. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-28 11:55:20 -07:00
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
USB: Add EHCI and OHCH glue for OCTEON II SOCs. The OCTEON II SOC has USB EHCI and OHCI controllers connected directly to the internal I/O bus. This patch adds the necessary 'glue' logic to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II. The OCTEON normally runs big-endian, and the ehci/ohci internal registers have host endianness, so we need to select USB_EHCI_BIG_ENDIAN_MMIO. The ehci and ohci blocks share a common clocking and PHY infrastructure. Initialization of the host controller and PHY clocks is common between the two and is factored out into the octeon2-common.c file. Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in arch/mips/Kconfig in a following patch. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-usb@vger.kernel.org To: dbrownell@users.sourceforge.net Patchwork: http://patchwork.linux-mips.org/patch/1675/ Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-08 14:47:52 -07:00
obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
MIPS: Alchemy: abstract USB block control register access Alchemy chips have one or more registers which control access to the usb blocks as well as PHY configuration. I don't want the OHCI/EHCI glues to know about the different registers and bits; new code hides the gory details of USB configuration from them. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Patchwork: https://patchwork.linux-mips.org/patch/2709/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 drivers/usb/host/alchemy-common.c
2011-08-12 11:12:33 -07:00
obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
Copy Permalink