1
linux/fs/ioprio.c

236 lines
4.8 KiB
C
Raw Normal View History

/*
* fs/ioprio.c
*
* Copyright (C) 2004 Jens Axboe <axboe@kernel.dk>
*
* Helper functions for setting/querying io priorities of processes. The
* system calls closely mimmick getpriority/setpriority, see the man page for
* those. The prio argument is a composite of prio class and prio data, where
* the data argument has meaning within that class. The standard scheduling
* classes have 8 distinct prio levels, with 0 being the highest prio and 7
* being the lowest.
*
* IOW, setting BE scheduling class with prio 2 is done ala:
*
* unsigned int prio = (IOPRIO_CLASS_BE << IOPRIO_CLASS_SHIFT) | 2;
*
* ioprio_set(PRIO_PROCESS, pid, prio);
*
* See also Documentation/block/ioprio.txt
*
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 01:04:11 -07:00
#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/ioprio.h>
#include <linux/blkdev.h>
#include <linux/capability.h>
#include <linux/syscalls.h>
#include <linux/security.h>
#include <linux/pid_namespace.h>
int set_task_ioprio(struct task_struct *task, int ioprio)
{
int err;
struct io_context *ioc;
const struct cred *cred = current_cred(), *tcred;
rcu_read_lock();
tcred = __task_cred(task);
if (tcred->uid != cred->euid &&
tcred->uid != cred->uid && !capable(CAP_SYS_NICE)) {
rcu_read_unlock();
return -EPERM;
}
rcu_read_unlock();
err = security_task_setioprio(task, ioprio);
if (err)
return err;
block: make ioc get/put interface more conventional and fix race on alloction Ignoring copy_io() during fork, io_context can be allocated from two places - current_io_context() and set_task_ioprio(). The former is always called from local task while the latter can be called from different task. The synchornization between them are peculiar and dubious. * current_io_context() doesn't grab task_lock() and assumes that if it saw %NULL ->io_context, it would stay that way until allocation and assignment is complete. It has smp_wmb() between alloc/init and assignment. * set_task_ioprio() grabs task_lock() for assignment and does smp_read_barrier_depends() between "ioc = task->io_context" and "if (ioc)". Unfortunately, this doesn't achieve anything - the latter is not a dependent load of the former. ie, if ioc itself were being dereferenced "ioc->xxx", it would mean something (not sure what tho) but as the code currently stands, the dependent read barrier is noop. As only one of the the two test-assignment sequences is task_lock() protected, the task_lock() can't do much about race between the two. Nothing prevents current_io_context() and set_task_ioprio() allocating its own ioc for the same task and overwriting the other's. Also, set_task_ioprio() can race with exiting task and create a new ioc after exit_io_context() is finished. ioc get/put doesn't have any reason to be complex. The only hot path is accessing the existing ioc of %current, which is simple to achieve given that ->io_context is never destroyed as long as the task is alive. All other paths can happily go through task_lock() like all other task sub structures without impacting anything. This patch updates ioc get/put so that it becomes more conventional. * alloc_io_context() is replaced with get_task_io_context(). This is the only interface which can acquire access to ioc of another task. On return, the caller has an explicit reference to the object which should be put using put_io_context() afterwards. * The functionality of current_io_context() remains the same but when creating a new ioc, it shares the code path with get_task_io_context() and always goes through task_lock(). * get_io_context() now means incrementing ref on an ioc which the caller already has access to (be that an explicit refcnt or implicit %current one). * PF_EXITING inhibits creation of new io_context and once exit_io_context() is finished, it's guaranteed that both ioc acquisition functions return %NULL. * All users are updated. Most are trivial but smp_read_barrier_depends() removal from cfq_get_io_context() needs a bit of explanation. I suppose the original intention was to ensure ioc->ioprio is visible when set_task_ioprio() allocates new io_context and installs it; however, this wouldn't have worked because set_task_ioprio() doesn't have wmb between init and install. There are other problems with this which will be fixed in another patch. * While at it, use NUMA_NO_NODE instead of -1 for wildcard node specification. -v2: Vivek spotted contamination from debug patch. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-13 16:33:38 -07:00
ioc = get_task_io_context(task, GFP_ATOMIC, NUMA_NO_NODE);
if (ioc) {
ioc_ioprio_changed(ioc, ioprio);
block: make ioc get/put interface more conventional and fix race on alloction Ignoring copy_io() during fork, io_context can be allocated from two places - current_io_context() and set_task_ioprio(). The former is always called from local task while the latter can be called from different task. The synchornization between them are peculiar and dubious. * current_io_context() doesn't grab task_lock() and assumes that if it saw %NULL ->io_context, it would stay that way until allocation and assignment is complete. It has smp_wmb() between alloc/init and assignment. * set_task_ioprio() grabs task_lock() for assignment and does smp_read_barrier_depends() between "ioc = task->io_context" and "if (ioc)". Unfortunately, this doesn't achieve anything - the latter is not a dependent load of the former. ie, if ioc itself were being dereferenced "ioc->xxx", it would mean something (not sure what tho) but as the code currently stands, the dependent read barrier is noop. As only one of the the two test-assignment sequences is task_lock() protected, the task_lock() can't do much about race between the two. Nothing prevents current_io_context() and set_task_ioprio() allocating its own ioc for the same task and overwriting the other's. Also, set_task_ioprio() can race with exiting task and create a new ioc after exit_io_context() is finished. ioc get/put doesn't have any reason to be complex. The only hot path is accessing the existing ioc of %current, which is simple to achieve given that ->io_context is never destroyed as long as the task is alive. All other paths can happily go through task_lock() like all other task sub structures without impacting anything. This patch updates ioc get/put so that it becomes more conventional. * alloc_io_context() is replaced with get_task_io_context(). This is the only interface which can acquire access to ioc of another task. On return, the caller has an explicit reference to the object which should be put using put_io_context() afterwards. * The functionality of current_io_context() remains the same but when creating a new ioc, it shares the code path with get_task_io_context() and always goes through task_lock(). * get_io_context() now means incrementing ref on an ioc which the caller already has access to (be that an explicit refcnt or implicit %current one). * PF_EXITING inhibits creation of new io_context and once exit_io_context() is finished, it's guaranteed that both ioc acquisition functions return %NULL. * All users are updated. Most are trivial but smp_read_barrier_depends() removal from cfq_get_io_context() needs a bit of explanation. I suppose the original intention was to ensure ioc->ioprio is visible when set_task_ioprio() allocates new io_context and installs it; however, this wouldn't have worked because set_task_ioprio() doesn't have wmb between init and install. There are other problems with this which will be fixed in another patch. * While at it, use NUMA_NO_NODE instead of -1 for wildcard node specification. -v2: Vivek spotted contamination from debug patch. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-13 16:33:38 -07:00
put_io_context(ioc);
}
return err;
}
EXPORT_SYMBOL_GPL(set_task_ioprio);
SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio)
{
int class = IOPRIO_PRIO_CLASS(ioprio);
int data = IOPRIO_PRIO_DATA(ioprio);
struct task_struct *p, *g;
struct user_struct *user;
struct pid *pgrp;
int ret;
switch (class) {
case IOPRIO_CLASS_RT:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
/* fall through, rt has prio field too */
case IOPRIO_CLASS_BE:
if (data >= IOPRIO_BE_NR || data < 0)
return -EINVAL;
break;
case IOPRIO_CLASS_IDLE:
break;
case IOPRIO_CLASS_NONE:
if (data)
return -EINVAL;
break;
default:
return -EINVAL;
}
ret = -ESRCH;
ioprio: grab rcu_read_lock in sys_ioprio_{set,get}() Using: - CONFIG_LOCKUP_DETECTOR=y - CONFIG_PREEMPT=y - CONFIG_LOCKDEP=y - CONFIG_PROVE_LOCKING=y - CONFIG_PROVE_RCU=y found a missing rcu lock during boot on a 512 MiB x86_64 ubuntu vm: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/pid.c:419 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by ureadahead/1355: #0: (tasklist_lock){.+.+..}, at: [<ffffffff8115bc09>] sys_ioprio_set+0x7f/0x29e stack backtrace: Pid: 1355, comm: ureadahead Not tainted 2.6.37-dbg-DEV #1 Call Trace: [<ffffffff8109c10c>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffff81088cbf>] find_task_by_pid_ns+0x44/0x5d [<ffffffff81088cfa>] find_task_by_vpid+0x22/0x24 [<ffffffff8115bc3e>] sys_ioprio_set+0xb4/0x29e [<ffffffff8147cf21>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8105c409>] sysenter_dispatch+0x7/0x2c [<ffffffff8147cee2>] ? trace_hardirqs_on_thunk+0x3a/0x3f The fix is to: a) grab rcu lock in sys_ioprio_{set,get}() and b) avoid grabbing tasklist_lock. Discussion in: http://marc.info/?l=linux-kernel&m=128951324702889 Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Modified by Jens to remove the now redundant inner rcu lock and unlock since they are now protected by the outer lock. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-15 02:20:52 -07:00
rcu_read_lock();
switch (which) {
case IOPRIO_WHO_PROCESS:
if (!who)
p = current;
else
p = find_task_by_vpid(who);
if (p)
ret = set_task_ioprio(p, ioprio);
break;
case IOPRIO_WHO_PGRP:
if (!who)
pgrp = task_pgrp(current);
else
pgrp = find_vpid(who);
do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
ret = set_task_ioprio(p, ioprio);
if (ret)
break;
} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
break;
case IOPRIO_WHO_USER:
if (!who)
user = current_user();
else
user = find_user(who);
if (!user)
break;
do_each_thread(g, p) {
ioprio: grab rcu_read_lock in sys_ioprio_{set,get}() Using: - CONFIG_LOCKUP_DETECTOR=y - CONFIG_PREEMPT=y - CONFIG_LOCKDEP=y - CONFIG_PROVE_LOCKING=y - CONFIG_PROVE_RCU=y found a missing rcu lock during boot on a 512 MiB x86_64 ubuntu vm: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/pid.c:419 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by ureadahead/1355: #0: (tasklist_lock){.+.+..}, at: [<ffffffff8115bc09>] sys_ioprio_set+0x7f/0x29e stack backtrace: Pid: 1355, comm: ureadahead Not tainted 2.6.37-dbg-DEV #1 Call Trace: [<ffffffff8109c10c>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffff81088cbf>] find_task_by_pid_ns+0x44/0x5d [<ffffffff81088cfa>] find_task_by_vpid+0x22/0x24 [<ffffffff8115bc3e>] sys_ioprio_set+0xb4/0x29e [<ffffffff8147cf21>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8105c409>] sysenter_dispatch+0x7/0x2c [<ffffffff8147cee2>] ? trace_hardirqs_on_thunk+0x3a/0x3f The fix is to: a) grab rcu lock in sys_ioprio_{set,get}() and b) avoid grabbing tasklist_lock. Discussion in: http://marc.info/?l=linux-kernel&m=128951324702889 Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Modified by Jens to remove the now redundant inner rcu lock and unlock since they are now protected by the outer lock. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-15 02:20:52 -07:00
if (__task_cred(p)->uid != who)
continue;
ret = set_task_ioprio(p, ioprio);
if (ret)
goto free_uid;
} while_each_thread(g, p);
free_uid:
if (who)
free_uid(user);
break;
default:
ret = -EINVAL;
}
ioprio: grab rcu_read_lock in sys_ioprio_{set,get}() Using: - CONFIG_LOCKUP_DETECTOR=y - CONFIG_PREEMPT=y - CONFIG_LOCKDEP=y - CONFIG_PROVE_LOCKING=y - CONFIG_PROVE_RCU=y found a missing rcu lock during boot on a 512 MiB x86_64 ubuntu vm: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/pid.c:419 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by ureadahead/1355: #0: (tasklist_lock){.+.+..}, at: [<ffffffff8115bc09>] sys_ioprio_set+0x7f/0x29e stack backtrace: Pid: 1355, comm: ureadahead Not tainted 2.6.37-dbg-DEV #1 Call Trace: [<ffffffff8109c10c>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffff81088cbf>] find_task_by_pid_ns+0x44/0x5d [<ffffffff81088cfa>] find_task_by_vpid+0x22/0x24 [<ffffffff8115bc3e>] sys_ioprio_set+0xb4/0x29e [<ffffffff8147cf21>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8105c409>] sysenter_dispatch+0x7/0x2c [<ffffffff8147cee2>] ? trace_hardirqs_on_thunk+0x3a/0x3f The fix is to: a) grab rcu lock in sys_ioprio_{set,get}() and b) avoid grabbing tasklist_lock. Discussion in: http://marc.info/?l=linux-kernel&m=128951324702889 Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Modified by Jens to remove the now redundant inner rcu lock and unlock since they are now protected by the outer lock. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-15 02:20:52 -07:00
rcu_read_unlock();
return ret;
}
static int get_task_ioprio(struct task_struct *p)
{
int ret;
ret = security_task_getioprio(p);
if (ret)
goto out;
ret = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_NONE, IOPRIO_NORM);
if (p->io_context)
ret = p->io_context->ioprio;
out:
return ret;
}
int ioprio_best(unsigned short aprio, unsigned short bprio)
{
unsigned short aclass = IOPRIO_PRIO_CLASS(aprio);
unsigned short bclass = IOPRIO_PRIO_CLASS(bprio);
if (aclass == IOPRIO_CLASS_NONE)
aclass = IOPRIO_CLASS_BE;
if (bclass == IOPRIO_CLASS_NONE)
bclass = IOPRIO_CLASS_BE;
if (aclass == bclass)
return min(aprio, bprio);
if (aclass > bclass)
return bprio;
else
return aprio;
}
SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
{
struct task_struct *g, *p;
struct user_struct *user;
struct pid *pgrp;
int ret = -ESRCH;
int tmpio;
ioprio: grab rcu_read_lock in sys_ioprio_{set,get}() Using: - CONFIG_LOCKUP_DETECTOR=y - CONFIG_PREEMPT=y - CONFIG_LOCKDEP=y - CONFIG_PROVE_LOCKING=y - CONFIG_PROVE_RCU=y found a missing rcu lock during boot on a 512 MiB x86_64 ubuntu vm: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/pid.c:419 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by ureadahead/1355: #0: (tasklist_lock){.+.+..}, at: [<ffffffff8115bc09>] sys_ioprio_set+0x7f/0x29e stack backtrace: Pid: 1355, comm: ureadahead Not tainted 2.6.37-dbg-DEV #1 Call Trace: [<ffffffff8109c10c>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffff81088cbf>] find_task_by_pid_ns+0x44/0x5d [<ffffffff81088cfa>] find_task_by_vpid+0x22/0x24 [<ffffffff8115bc3e>] sys_ioprio_set+0xb4/0x29e [<ffffffff8147cf21>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8105c409>] sysenter_dispatch+0x7/0x2c [<ffffffff8147cee2>] ? trace_hardirqs_on_thunk+0x3a/0x3f The fix is to: a) grab rcu lock in sys_ioprio_{set,get}() and b) avoid grabbing tasklist_lock. Discussion in: http://marc.info/?l=linux-kernel&m=128951324702889 Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Modified by Jens to remove the now redundant inner rcu lock and unlock since they are now protected by the outer lock. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-15 02:20:52 -07:00
rcu_read_lock();
switch (which) {
case IOPRIO_WHO_PROCESS:
if (!who)
p = current;
else
p = find_task_by_vpid(who);
if (p)
ret = get_task_ioprio(p);
break;
case IOPRIO_WHO_PGRP:
if (!who)
pgrp = task_pgrp(current);
else
pgrp = find_vpid(who);
do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
tmpio = get_task_ioprio(p);
if (tmpio < 0)
continue;
if (ret == -ESRCH)
ret = tmpio;
else
ret = ioprio_best(ret, tmpio);
} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
break;
case IOPRIO_WHO_USER:
if (!who)
user = current_user();
else
user = find_user(who);
if (!user)
break;
do_each_thread(g, p) {
ioprio: grab rcu_read_lock in sys_ioprio_{set,get}() Using: - CONFIG_LOCKUP_DETECTOR=y - CONFIG_PREEMPT=y - CONFIG_LOCKDEP=y - CONFIG_PROVE_LOCKING=y - CONFIG_PROVE_RCU=y found a missing rcu lock during boot on a 512 MiB x86_64 ubuntu vm: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/pid.c:419 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by ureadahead/1355: #0: (tasklist_lock){.+.+..}, at: [<ffffffff8115bc09>] sys_ioprio_set+0x7f/0x29e stack backtrace: Pid: 1355, comm: ureadahead Not tainted 2.6.37-dbg-DEV #1 Call Trace: [<ffffffff8109c10c>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffff81088cbf>] find_task_by_pid_ns+0x44/0x5d [<ffffffff81088cfa>] find_task_by_vpid+0x22/0x24 [<ffffffff8115bc3e>] sys_ioprio_set+0xb4/0x29e [<ffffffff8147cf21>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8105c409>] sysenter_dispatch+0x7/0x2c [<ffffffff8147cee2>] ? trace_hardirqs_on_thunk+0x3a/0x3f The fix is to: a) grab rcu lock in sys_ioprio_{set,get}() and b) avoid grabbing tasklist_lock. Discussion in: http://marc.info/?l=linux-kernel&m=128951324702889 Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Modified by Jens to remove the now redundant inner rcu lock and unlock since they are now protected by the outer lock. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-15 02:20:52 -07:00
if (__task_cred(p)->uid != user->uid)
continue;
tmpio = get_task_ioprio(p);
if (tmpio < 0)
continue;
if (ret == -ESRCH)
ret = tmpio;
else
ret = ioprio_best(ret, tmpio);
} while_each_thread(g, p);
if (who)
free_uid(user);
break;
default:
ret = -EINVAL;
}
ioprio: grab rcu_read_lock in sys_ioprio_{set,get}() Using: - CONFIG_LOCKUP_DETECTOR=y - CONFIG_PREEMPT=y - CONFIG_LOCKDEP=y - CONFIG_PROVE_LOCKING=y - CONFIG_PROVE_RCU=y found a missing rcu lock during boot on a 512 MiB x86_64 ubuntu vm: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/pid.c:419 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by ureadahead/1355: #0: (tasklist_lock){.+.+..}, at: [<ffffffff8115bc09>] sys_ioprio_set+0x7f/0x29e stack backtrace: Pid: 1355, comm: ureadahead Not tainted 2.6.37-dbg-DEV #1 Call Trace: [<ffffffff8109c10c>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffff81088cbf>] find_task_by_pid_ns+0x44/0x5d [<ffffffff81088cfa>] find_task_by_vpid+0x22/0x24 [<ffffffff8115bc3e>] sys_ioprio_set+0xb4/0x29e [<ffffffff8147cf21>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8105c409>] sysenter_dispatch+0x7/0x2c [<ffffffff8147cee2>] ? trace_hardirqs_on_thunk+0x3a/0x3f The fix is to: a) grab rcu lock in sys_ioprio_{set,get}() and b) avoid grabbing tasklist_lock. Discussion in: http://marc.info/?l=linux-kernel&m=128951324702889 Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Modified by Jens to remove the now redundant inner rcu lock and unlock since they are now protected by the outer lock. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-15 02:20:52 -07:00
rcu_read_unlock();
return ret;
}