1
linux/drivers/mmc/core/bus.c

295 lines
5.9 KiB
C
Raw Normal View History

/*
* linux/drivers/mmc/core/bus.c
*
* Copyright (C) 2003 Russell King, All Rights Reserved.
* Copyright (C) 2007 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* MMC card bus driver model
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include "core.h"
#include "sdio_cis.h"
#include "bus.h"
#define dev_to_mmc_card(d) container_of(d, struct mmc_card, dev)
#define to_mmc_driver(d) container_of(d, struct mmc_driver, drv)
static ssize_t mmc_type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct mmc_card *card = dev_to_mmc_card(dev);
switch (card->type) {
case MMC_TYPE_MMC:
return sprintf(buf, "MMC\n");
case MMC_TYPE_SD:
return sprintf(buf, "SD\n");
case MMC_TYPE_SDIO:
return sprintf(buf, "SDIO\n");
default:
return -EFAULT;
}
}
static struct device_attribute mmc_dev_attrs[] = {
__ATTR(type, S_IRUGO, mmc_type_show, NULL),
__ATTR_NULL,
};
/*
* This currently matches any MMC driver to any MMC card - drivers
* themselves make the decision whether to drive this card in their
* probe method.
*/
static int mmc_bus_match(struct device *dev, struct device_driver *drv)
{
return 1;
}
static int
mmc_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct mmc_card *card = dev_to_mmc_card(dev);
const char *type;
int retval = 0;
switch (card->type) {
case MMC_TYPE_MMC:
type = "MMC";
break;
case MMC_TYPE_SD:
type = "SD";
break;
case MMC_TYPE_SDIO:
type = "SDIO";
break;
default:
type = NULL;
}
if (type) {
retval = add_uevent_var(env, "MMC_TYPE=%s", type);
if (retval)
return retval;
}
retval = add_uevent_var(env, "MMC_NAME=%s", mmc_card_name(card));
if (retval)
return retval;
/*
* Request the mmc_block device. Note: that this is a direct request
* for the module it carries no information as to what is inserted.
*/
retval = add_uevent_var(env, "MODALIAS=mmc:block");
return retval;
}
static int mmc_bus_probe(struct device *dev)
{
struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = dev_to_mmc_card(dev);
return drv->probe(card);
}
static int mmc_bus_remove(struct device *dev)
{
struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = dev_to_mmc_card(dev);
drv->remove(card);
return 0;
}
static int mmc_bus_suspend(struct device *dev, pm_message_t state)
{
struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = dev_to_mmc_card(dev);
int ret = 0;
if (dev->driver && drv->suspend)
ret = drv->suspend(card, state);
return ret;
}
static int mmc_bus_resume(struct device *dev)
{
struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = dev_to_mmc_card(dev);
int ret = 0;
if (dev->driver && drv->resume)
ret = drv->resume(card);
return ret;
}
static struct bus_type mmc_bus_type = {
.name = "mmc",
.dev_attrs = mmc_dev_attrs,
.match = mmc_bus_match,
.uevent = mmc_bus_uevent,
.probe = mmc_bus_probe,
.remove = mmc_bus_remove,
.suspend = mmc_bus_suspend,
.resume = mmc_bus_resume,
};
int mmc_register_bus(void)
{
return bus_register(&mmc_bus_type);
}
void mmc_unregister_bus(void)
{
bus_unregister(&mmc_bus_type);
}
/**
* mmc_register_driver - register a media driver
* @drv: MMC media driver
*/
int mmc_register_driver(struct mmc_driver *drv)
{
drv->drv.bus = &mmc_bus_type;
return driver_register(&drv->drv);
}
EXPORT_SYMBOL(mmc_register_driver);
/**
* mmc_unregister_driver - unregister a media driver
* @drv: MMC media driver
*/
void mmc_unregister_driver(struct mmc_driver *drv)
{
drv->drv.bus = &mmc_bus_type;
driver_unregister(&drv->drv);
}
EXPORT_SYMBOL(mmc_unregister_driver);
static void mmc_release_card(struct device *dev)
{
struct mmc_card *card = dev_to_mmc_card(dev);
sdio_free_common_cis(card);
if (card->info)
kfree(card->info);
kfree(card);
}
/*
* Allocate and initialise a new MMC card structure.
*/
struct mmc_card *mmc_alloc_card(struct mmc_host *host, struct device_type *type)
{
struct mmc_card *card;
card = kzalloc(sizeof(struct mmc_card), GFP_KERNEL);
if (!card)
return ERR_PTR(-ENOMEM);
card->host = host;
device_initialize(&card->dev);
card->dev.parent = mmc_classdev(host);
card->dev.bus = &mmc_bus_type;
card->dev.release = mmc_release_card;
card->dev.type = type;
return card;
}
/*
* Register a new MMC card with the driver model.
*/
int mmc_add_card(struct mmc_card *card)
{
int ret;
const char *type;
dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card->host), card->rca);
switch (card->type) {
case MMC_TYPE_MMC:
type = "MMC";
break;
case MMC_TYPE_SD:
type = "SD";
if (mmc_card_blockaddr(card))
type = "SDHC";
break;
case MMC_TYPE_SDIO:
type = "SDIO";
break;
default:
type = "?";
break;
}
MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-08 09:11:32 -07:00
if (mmc_host_is_spi(card->host)) {
printk(KERN_INFO "%s: new %s%s card on SPI\n",
mmc_hostname(card->host),
mmc_card_highspeed(card) ? "high speed " : "",
type);
} else {
printk(KERN_INFO "%s: new %s%s card at address %04x\n",
mmc_hostname(card->host),
mmc_card_highspeed(card) ? "high speed " : "",
type, card->rca);
}
ret = device_add(&card->dev);
if (ret)
return ret;
#ifdef CONFIG_DEBUG_FS
mmc_add_card_debugfs(card);
#endif
mmc_card_set_present(card);
return 0;
}
/*
* Unregister a new MMC card with the driver model, and
* (eventually) free it.
*/
void mmc_remove_card(struct mmc_card *card)
{
#ifdef CONFIG_DEBUG_FS
mmc_remove_card_debugfs(card);
#endif
if (mmc_card_present(card)) {
MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-08 09:11:32 -07:00
if (mmc_host_is_spi(card->host)) {
printk(KERN_INFO "%s: SPI card removed\n",
mmc_hostname(card->host));
} else {
printk(KERN_INFO "%s: card %04x removed\n",
mmc_hostname(card->host), card->rca);
}
device_del(&card->dev);
}
put_device(&card->dev);
}