linux/drivers/net/sk98lin/Makefile

#
# Makefile for the SysKonnect SK-98xx device driver.
#


#
# Standalone driver params
# SKPARAM += -DSK_KERNEL_24
# SKPARAM += -DSK_KERNEL_24_26
# SKPARAM += -DSK_KERNEL_26
# SKPARAM += -DSK_KERNEL_22_24

obj-$(CONFIG_SK98LIN) += sk98lin.o
sk98lin-objs    :=	\
		skge.o		\
		skethtool.o	\
		skdim.o		\
		skaddr.o	\
		skgehwt.o	\
		skgeinit.o	\
		skgepnmi.o	\
		skgesirq.o	\
		ski2c.o		\
		sklm80.o	\
		skqueue.o	\
		skrlmt.o	\
		sktimer.o	\
		skvpd.o		\
		skxmac2.o

# DBGDEF =  \
# -DDEBUG

ifdef DEBUG
DBGDEF +=  \
-DSK_DEBUG_CHKMOD=0x00000000L \
-DSK_DEBUG_CHKCAT=0x00000000L
endif


# **** possible debug modules for SK_DEBUG_CHKMOD *****************
# SK_DBGMOD_MERR        0x00000001L     /* general module error indication */
# SK_DBGMOD_HWM         0x00000002L     /* Hardware init module */
# SK_DBGMOD_RLMT        0x00000004L     /* RLMT module */
# SK_DBGMOD_VPD         0x00000008L     /* VPD module */
# SK_DBGMOD_I2C         0x00000010L     /* I2C module */
# SK_DBGMOD_PNMI        0x00000020L     /* PNMI module */
# SK_DBGMOD_CSUM        0x00000040L     /* CSUM module */
# SK_DBGMOD_ADDR        0x00000080L     /* ADDR module */
# SK_DBGMOD_DRV         0x00010000L     /* DRV module */

# **** possible debug categories for SK_DEBUG_CHKCAT **************
# *** common modules ***
# SK_DBGCAT_INIT        0x00000001L     module/driver initialization
# SK_DBGCAT_CTRL        0x00000002L     controlling: add/rmv MCA/MAC and other controls (IOCTL)
# SK_DBGCAT_ERR         0x00000004L     error handling paths
# SK_DBGCAT_TX          0x00000008L     transmit path
# SK_DBGCAT_RX          0x00000010L     receive path
# SK_DBGCAT_IRQ         0x00000020L     general IRQ handling
# SK_DBGCAT_QUEUE       0x00000040L     any queue management
# SK_DBGCAT_DUMP        0x00000080L     large data output e.g. hex dump
# SK_DBGCAT_FATAL       0x00000100L     large data output e.g. hex dump

# *** driver (file skge.c) ***
# SK_DBGCAT_DRV_ENTRY           0x00010000      entry points
# SK_DBGCAT_DRV_???             0x00020000      not used
# SK_DBGCAT_DRV_MCA             0x00040000      multicast
# SK_DBGCAT_DRV_TX_PROGRESS     0x00080000      tx path
# SK_DBGCAT_DRV_RX_PROGRESS     0x00100000      rx path
# SK_DBGCAT_DRV_PROGRESS        0x00200000      general runtime
# SK_DBGCAT_DRV_???             0x00400000      not used
# SK_DBGCAT_DRV_PROM            0x00800000      promiscuous mode
# SK_DBGCAT_DRV_TX_FRAME        0x01000000      display tx frames
# SK_DBGCAT_DRV_ERROR           0x02000000      error conditions
# SK_DBGCAT_DRV_INT_SRC         0x04000000      interrupts sources
# SK_DBGCAT_DRV_EVENT           0x08000000      driver events

EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)

clean:
	rm -f core *.o *.a *.s