kevin/linux
1
Fork 0
Code
da4d2904ab
linux/arch/arm/mach-omap2/clock2xxx.h

43 lines
1.5 KiB
C
Raw Normal View History

OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* The OMAP2 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the prcm_config data structures out into their own files, opp2xxx.h and opp24{2,3}0_data.c, and only build in the OPP tables for the target device. This should save some memory. In the long run, these prcm_config tables should be replaced with OPP code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Nishanth Menon <nm@ti.com>
2009-12-08 16:21:29 -07:00
/*
* OMAP2 clock function prototypes and macros
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
*/
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
unsigned long omap2_table_mpu_recalc(struct clk *clk);
int omap2_select_table_rate(struct clk *clk, unsigned long rate);
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c Move the sys_clk clock functions from clock2xxx.c to mach-omap2/clkt2xxx_sys.c. This is intended to make the clock code easier to understand, since all of the functions needed to manage the sys_clk are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for the sys_clk clock alone. This should reduce unnecessary console noise when debugging. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/ directory, rather than shared with other chip types that don't use this clock type. Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to improve the patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-26 20:13:08 -07:00
unsigned long omap2xxx_sys_clk_recalc(struct clk *clk);
OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* The OMAP2 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the prcm_config data structures out into their own files, opp2xxx.h and opp24{2,3}0_data.c, and only build in the OPP tables for the target device. This should save some memory. In the long run, these prcm_config tables should be replaced with OPP code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Nishanth Menon <nm@ti.com>
2009-12-08 16:21:29 -07:00
unsigned long omap2_osc_clk_recalc(struct clk *clk);
unsigned long omap2_dpllcore_recalc(struct clk *clk);
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
OMAP2xxx clock: move the APLL clock code into mach-omap2/clkt2xxx_apll.c Move the APLL-related clock functions from clock2xxx.c to mach-omap2/clkt2xxx_apll.c. This is intended to make the clock code easier to understand, since all of the functions needed to manage APLLs are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for APLL clocks alone. This should reduce unnecessary console noise when debugging. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/ directory, rather than shared with other chip types that don't use this clock type. Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to improve the patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-26 20:13:06 -07:00
u32 omap2xxx_get_apll_clkin(void);
OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c Move the osc_clk clock functions from clock2xxx.c to mach-omap2/clkt2xxx_osc. This is intended to make the clock code easier to understand, since all of the functions needed to manage the osc_clk are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for osc_clk clocks alone. This should reduce unnecessary console noise when debugging. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/ directory, rather than shared with other chip types that don't use this clock type. Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to improve the patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-26 20:13:07 -07:00
u32 omap2xxx_get_sysclkdiv(void);
OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* The OMAP2 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the prcm_config data structures out into their own files, opp2xxx.h and opp24{2,3}0_data.c, and only build in the OPP tables for the target device. This should save some memory. In the long run, these prcm_config tables should be replaced with OPP code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Nishanth Menon <nm@ti.com>
2009-12-08 16:21:29 -07:00
/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
#ifdef CONFIG_ARCH_OMAP2420
#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
#else
#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
#endif
extern void __iomem *prcm_clksrc_ctrl;
extern struct clk *dclk;
extern const struct clkops clkops_omap2430_i2chs_wait;
extern const struct clkops clkops_oscck;
extern const struct clkops clkops_apll96;
extern const struct clkops clkops_apll54;
#endif
Copy Permalink