kevin/linux
1
Fork 0
Code
d61b7a572b
linux/drivers/ata/libata.h

227 lines
9.1 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
[libata] license change, other bits - changes license of all code from OSL+GPL to plain ole GPL - except for NVIDIA, who hasn't yet responded about sata_nv - copyright holders were already contacted privately - adds info in each driver about where hardware/protocol docs may be obtained - where I have made major contributions, updated copyright dates
2005-08-28 17:18:39 -07:00
* libata.h - helper library for ATA
*
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
* Copyright 2003-2004 Jeff Garzik
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* libata documentation is available via 'make {ps|pdf}docs',
* as Documentation/DocBook/libata.*
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
#ifndef __LIBATA_H__
#define __LIBATA_H__
#define DRV_NAME "libata"
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 21:19:54 -07:00
#define DRV_VERSION "3.00" /* must be exactly four chars */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct ata_scsi_args {
[BLOCK] add FUA support to libata Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 01:56:18 -07:00
struct ata_device *dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
u16 *id;
struct scsi_cmnd *cmd;
void (*done)(struct scsi_cmnd *);
};
/* libata-core.c */
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 02:08:10 -07:00
enum {
/* flags for ata_dev_read_id() */
ATA_READID_POSTRESET = (1 << 0), /* reading ID after reset */
libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
/* selector for ata_down_xfermask_limit() */
ATA_DNXFER_PIO = 0, /* speed down PIO */
ATA_DNXFER_DMA = 1, /* speed down DMA */
ATA_DNXFER_40C = 2, /* apply 40c cable limit */
ATA_DNXFER_FORCE_PIO = 3, /* force PIO */
ATA_DNXFER_FORCE_PIO0 = 4, /* force PIO0 */
ATA_DNXFER_QUIET = (1 << 31),
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 02:08:10 -07:00
};
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 07:44:07 -07:00
extern unsigned int ata_print_id;
libata: add support for ATA_16 on ATAPI Add support for issuing ATA_16 passthru commands to ATAPI devices managed by libata. It requires the previous CDB length fix patch. A boot/module parameter, "atapi_passthru16=0" can be used to globally disable this feature, if ever desired. tj: restructured __ata_scsi_queuecmd() according to Jeff's suggestion. Signed-off-by: Mark Lord <liml@rtr.ca> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07 09:08:45 -07:00
extern int atapi_passthru16;
[libata] Disable FUA Until problems are sorted.
2006-02-27 20:31:19 -07:00
extern int libata_fua;
[libata] Disable ACPI by default; fix namespace problems Not yet ready to turn on ATA ACPI by default, for either PATA or SATA. Also, rename the global-scope module parameter variable 'noacpi' to something more libata-specific, reducing the potential for namespace collision. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-27 22:57:37 -07:00
extern int libata_noacpi;
libata: Disable ATA8-ACS proposed Trusted Computing features by default Historically word 48 in the identify data was used to mean 32bit I/O was supported for VLB IDE etc. ATA8 reassigns this word to the Trusted Computing Group, where it is used for TCG features. This means that an ATA8 TCG drive is going to trigger 32bit I/O on some systems which will be funny. Anyway we need to sort this out ready for ATA8 so: - Reorder the ata.h header a bit so the ata_version function occurs early in it - Make dword_io check the ATA version - Add an ATA8 version checking TCG presence test While we are at it the current drafts have a flaw where it may not be possible to disable TCG features at boot (and opt out of the trusted model) as TCG intends because it relies on presence of a different optional feature (DCS). Handle this in software by refusing the TCG commands if libata.allow_tpm is not set. (We must make it possible as some environments such as proprietary VDR devices will doubtless want to use it to lock up content) Finally as with CPRM print a warning so that the user knows they may not be able to full access and use the device. Signed-off-by: Alan Cox <alan@redhat.com>
2007-11-04 20:05:49 -07:00
extern int libata_allow_tpm;
ata: add ata port system PM callbacks Change ata_host_request_pm to ata_port_request_pm which performs port suspend/resume. Add ata port type driver which implements port PM callbacks. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-12-04 18:20:27 -07:00
extern struct device_type ata_port_type;
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 01:02:43 -07:00
extern struct ata_link *ata_dev_phys_link(struct ata_device *dev);
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
extern void ata_force_cbl(struct ata_port *ap);
libata: make ata_tf_to_lba[48]() generic ata_tf_to_lba[48]() currently return LBA in tf + 1 for ata_read_native_max_address(). Make them return LBA and make it global so that it can be used to read LBA off TF for other purposes. ata_read_native_max_address() now adds 1 itself. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-27 03:14:23 -07:00
extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axobe <jens.axboe@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-09 22:48:21 -07:00
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
[PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf() Separate out rw ATA taskfile building from ata_scsi_rw_xlat() into ata_build_rw_tf(). This will be used to improve media error handling. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:10 -07:00
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
[PATCH] libata: implement ata_tf_read_block() Implement ata_tf_read_block(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-14 06:37:35 -07:00
extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 04:57:53 -07:00
extern unsigned ata_exec_internal(struct ata_device *dev,
[PATCH] libata: make some libata-core routines extern Make libata-core routines which will be used by EH implementation extern. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 02:51:53 -07:00
struct ata_taskfile *tf, const u8 *cdb,
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-08 23:05:44 -07:00
int dma_dir, void *buf, unsigned int buflen,
unsigned long timeout);
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
extern unsigned ata_exec_internal_sg(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, struct scatterlist *sg,
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-08 23:05:44 -07:00
unsigned int n_elem, unsigned long timeout);
[PATCH] libata: make two functions global Make ata_do_simple_cmd() and ata_flush_cache() global. These will be used from libata-eh.c. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-24 04:30:19 -07:00
extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
libata: separate out ata_wait_ready() and implement ata_wait_after_reset() Factor out waiting logic (which is common to all ATA controllers) from ata_sff_wait_ready() into ata_wait_ready(). ata_wait_ready() takes @check_ready function pointer and uses it to poll for readiness. This allows non-SFF controllers to use ata_wait_ready() to wait for link readiness. This patch also implements ata_wait_after_reset() - generic version of ata_sff_wait_after_reset() - using ata_wait_ready(). ata_sff_wait_ready() is reimplemented using ata_wait_ready() and ata_sff_check_ready(). Functionality remains the same. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 06:47:19 -07:00
extern int ata_wait_ready(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link));
[PATCH] libata-hp-prep: make probing related functions global Hotplug will be implemented in libata-eh.c. Make ata_dev_read_id() and ata_dev_configure() global. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 02:27:44 -07:00
extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 02:08:10 -07:00
unsigned int flags, u16 *id);
libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 11:28:15 -07:00
extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
libata-pmp-prep: add @new_class to ata_dev_revalidate() Consider newly found class code while revalidating. PMP resetting always results in valid class code and issuing PMP commands to ATA/ATAPI device isn't very attractive. Add @new_class to ata_dev_revalidate() and check class code for revalidation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 21:14:12 -07:00
extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
unsigned int readid_flags);
[PATCH] libata: implement ATA_EHI_PRINTINFO Implement ehi flag ATA_EHI_PRINTINFO. This flag is set when device configuration needs to print out device info. This used to be handled by @print_info argument to ata_dev_configure() but LLDs also need to know about it in ->dev_config() callback. This patch replaces @print_info w/ ATA_EHI_PRINTINFO and make sata_sil print workaround messages only on the initial configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 02:38:52 -07:00
extern int ata_dev_configure(struct ata_device *dev);
libata: add @spd_limit to sata_down_spd_limit() Add @spd_limit to sata_down_spd_limit() so that the caller can specify the SPD limit it wants. This parameter doesn't get in the way even when it's too low. The closest possible limit is applied. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:33 -07:00
extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global Link power management is about to be reimplemented. Prepare for it. * Implement sata_link_scr_lpm(). * Drop static from ata_dev_set_feature() and make it available to other libata files. * Trivial whitespace adjustments. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-01 08:50:05 -07:00
extern unsigned int ata_dev_set_feature(struct ata_device *dev,
u8 enable, u8 feature);
[PATCH] libata: prepare ata_sg_clean() for invocation from EH Make ata_sg_clean() global and don't allow NCQ for internal commands. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:10 -07:00
extern void ata_sg_clean(struct ata_queued_cmd *qc);
libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axobe <jens.axboe@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-09 22:48:21 -07:00
extern void ata_qc_free(struct ata_queued_cmd *qc);
[PATCH] libata: make ata_qc_issue complete failed qcs There is no reason for the issuer to diddle with a failed qc as the issuer has complete control over when a qc gets freed (usually in ->complete_fn). Make ata_qc_issue() responsible for completing qcs which failed to issue. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 04:41:11 -07:00
extern void ata_qc_issue(struct ata_queued_cmd *qc);
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 04:58:05 -07:00
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
libata: don't check whether to use DMA or not for no data commands There's no reason to check whether to use DMA or not for no data commands. Don't do it. While at it, make local variable using_pio in atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename ata_check_atapi_dma() to atapi_check_dma() for consistency. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-16 20:36:26 -07:00
extern int atapi_check_dma(struct ata_queued_cmd *qc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 01:02:43 -07:00
extern bool ata_phys_link_online(struct ata_link *link);
extern bool ata_phys_link_offline(struct ata_link *link);
[PATCH] libata-hp-prep: implement ata_dev_init() Move initialization of struct ata_device into ata_dev_init() in preparation for hotplug. This patch calls ata_dev_init() from ata_host_init() and thus makes no functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 02:27:30 -07:00
extern void ata_dev_init(struct ata_device *dev);
libata-pmp-prep: make a number of functions global to libata Make a number of functions from libata-core.c and libata-eh.c global to libata (drivers/ata/libata.h). These will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 21:14:12 -07:00
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
extern int sata_link_init_spd(struct ata_link *link);
[libata] ATA passthru (arbitrary ATA command execution) Authors: Brett Russ <russb@emc.com> John W. Linville <linville@tuxdriver.com> Andy Warner <andyw@pobox.com>
2005-05-12 12:45:22 -07:00
extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 07:44:07 -07:00
extern struct ata_port *ata_port_alloc(struct ata_host *host);
[libata] Add ATA transport class This is a scheleton for libata transport class. All information is read only, exporting information from libata: - ata_port class: one per ATA port - ata_link class: one per ATA port or 15 for SATA Port Multiplier - ata_device class: up to 2 for PATA link, usually one for SATA. Signed-off-by: Gwendal Grignou <gwendal@google.com> Reviewed-by: Grant Grundler <grundler@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-25 12:31:38 -07:00
extern const char *sata_spd_string(unsigned int spd);
libata: plumb sas port scan into standard libata paths The function ata_sas_port_init() has always really done its own thing. However, as a precursor to moving to the libata new eh, it has to be properly using the standard libata scan paths. This means separating the current libata scan paths into pieces which can be shared with libsas and pieces which cant (really just the async call and the host scan). Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-23 07:28:33 -07:00
extern int ata_port_probe(struct ata_port *ap);
[SCSI] libsas: async ata scanning libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang <jack_wang@usish.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-18 21:47:01 -07:00
extern void __ata_port_probe(struct ata_port *ap);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] libata: ACPI and _GTF support _GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
2006-09-28 11:29:01 -07:00
/* libata-acpi.c */
libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/ ACPI applies to both SATA and PATA. Drop the 'S' from the config variable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-05 07:50:38 -07:00
#ifdef CONFIG_ATA_ACPI
libata: make gtf_filter per-dev Add ->gtf_filter to ata_device and set it to ata_acpi_gtf_filter when initializing ata_link. This is to allow quirks which apply different gtf filters. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-15 12:17:28 -07:00
extern unsigned int ata_acpi_gtf_filter;
libata-pmp: extend ACPI support to cover PMP Extend ata_acpi_associate_sata_port() such that it can handle PMP and call it when PMP is attached and detached. Build breakage when !CONFIG_ATA_ACPI was spotted and fixed by Petr Vandrovec. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 21:19:54 -07:00
extern void ata_acpi_associate_sata_port(struct ata_port *ap);
libata-acpi: implement ata_acpi_associate() * Add acpi_handle to ata_host and ata_port. Rename ata_device->obj_handle to ->acpi_handle and move it above such that it doesn't get cleared on reconfiguration. * Replace ACPI node association which ata_acpi_associate() which is called once during host initialization. Unlike the previous implementation, ata_acpi_associate() uses ATA_FLAG_ACPI_SATA to choose between IDE or SATA ACPI hierarchy and uses simple child look up instead of recursive walk to match the nodes. This is way safer and simpler. Please read the following message for more info. http://article.gmane.org/gmane.linux.ide/17554 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 11:28:16 -07:00
extern void ata_acpi_associate(struct ata_host *host);
libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable() Add two hooks - ata_acpi_dissociate() which is called during driver detach after the whole host is shutdown and ata_acpi_on_disable() which is called when a device is disabled. Signed-off-by: Tejun heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-14 23:05:01 -07:00
extern void ata_acpi_dissociate(struct ata_host *host);
libata-acpi: implement _GTM/_STM support Implement _GTM/_STM support. acpi_gtm is added to ata_port which stores _GTM parameters over suspend/resume cycle. A new hook ata_acpi_on_suspend() is responsible for storing _GTM parameters during suspend. _STM is executed in ata_acpi_on_resume(). With this change, invoking _GTF is safe on IDE hierarchy and acpi_sata check before _GTF is removed. ata_acpi_gtm() and ata_acpi_stm() implementation is taken from Alan Cox's pata_acpi implementation. ata_acpi_gtm() is fixed such that the result parameter is not shifted by sizeof(union acpi_object). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 11:28:16 -07:00
extern int ata_acpi_on_suspend(struct ata_port *ap);
libata: reimplement ACPI invocation This patch reimplements ACPI invocation such that, instead of exporting ACPI details to the rest of libata, ACPI event handlers - ata_acpi_on_resume() and ata_acpi_on_devcfg() - are used. These two functions are responsible for determining whether specific ACPI method is used and when. On resume, _GTF is scheduled by setting ATA_DFLAG_ACPI_PENDING device flag. This is done this way to avoid performing the action on wrong device device (device swapping while suspended). On every ata_dev_configure(), ata_acpi_on_devcfg() is called, which performs _SDD and _GTF. _GTF is performed only after resuming and, if SATA, hardreset as the ACPI spec specifies. As _GTF may contain arbitrary commands, IDENTIFY page is re-read after _GTF taskfiles are executed. If one of ACPI methods fails, ata_acpi_on_devcfg() retries on the first failure. If it fails again on the second try, ACPI is disabled on the device. Note that successful configuration clears ACPI failed status. With all feature checks moved to the above two functions, do_drive_set_taskfiles() is trivial and thus collapsed into ata_acpi_exec_tfs(), which is now static and converted to return the number of executed taskfiles to be used by ata_acpi_on_resume(). As failures are handled properly, ata_acpi_push_id() now returns -errno on errors instead of unconditional zero. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 11:28:16 -07:00
extern void ata_acpi_on_resume(struct ata_port *ap);
libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable() Add two hooks - ata_acpi_dissociate() which is called during driver detach after the whole host is shutdown and ata_acpi_on_disable() which is called when a device is disabled. Signed-off-by: Tejun heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-14 23:05:01 -07:00
extern int ata_acpi_on_devcfg(struct ata_device *dev);
extern void ata_acpi_on_disable(struct ata_device *dev);
libata-acpi: add ACPI _PSx method ACPI spec (ver 3.0a, p289) requires IDE power on/off executes ACPI _PSx methods. As recently most PATA drivers use libata, this patch adds _PSx method support in libata. ACPI spec doesn't mention if SATA requires the same _PSx method. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-01 18:32:38 -07:00
extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
[PATCH] libata: ACPI and _GTF support _GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
2006-09-28 11:29:01 -07:00
#else
libata-pmp: extend ACPI support to cover PMP Extend ata_acpi_associate_sata_port() such that it can handle PMP and call it when PMP is attached and detached. Build breakage when !CONFIG_ATA_ACPI was spotted and fixed by Petr Vandrovec. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 21:19:54 -07:00
static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { }
libata-acpi: implement ata_acpi_associate() * Add acpi_handle to ata_host and ata_port. Rename ata_device->obj_handle to ->acpi_handle and move it above such that it doesn't get cleared on reconfiguration. * Replace ACPI node association which ata_acpi_associate() which is called once during host initialization. Unlike the previous implementation, ata_acpi_associate() uses ATA_FLAG_ACPI_SATA to choose between IDE or SATA ACPI hierarchy and uses simple child look up instead of recursive walk to match the nodes. This is way safer and simpler. Please read the following message for more info. http://article.gmane.org/gmane.linux.ide/17554 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 11:28:16 -07:00
static inline void ata_acpi_associate(struct ata_host *host) { }
libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable() Add two hooks - ata_acpi_dissociate() which is called during driver detach after the whole host is shutdown and ata_acpi_on_disable() which is called when a device is disabled. Signed-off-by: Tejun heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-14 23:05:01 -07:00
static inline void ata_acpi_dissociate(struct ata_host *host) { }
libata-acpi: implement _GTM/_STM support Implement _GTM/_STM support. acpi_gtm is added to ata_port which stores _GTM parameters over suspend/resume cycle. A new hook ata_acpi_on_suspend() is responsible for storing _GTM parameters during suspend. _STM is executed in ata_acpi_on_resume(). With this change, invoking _GTF is safe on IDE hierarchy and acpi_sata check before _GTF is removed. ata_acpi_gtm() and ata_acpi_stm() implementation is taken from Alan Cox's pata_acpi implementation. ata_acpi_gtm() is fixed such that the result parameter is not shifted by sizeof(union acpi_object). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 11:28:16 -07:00
static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
libata: reimplement ACPI invocation This patch reimplements ACPI invocation such that, instead of exporting ACPI details to the rest of libata, ACPI event handlers - ata_acpi_on_resume() and ata_acpi_on_devcfg() - are used. These two functions are responsible for determining whether specific ACPI method is used and when. On resume, _GTF is scheduled by setting ATA_DFLAG_ACPI_PENDING device flag. This is done this way to avoid performing the action on wrong device device (device swapping while suspended). On every ata_dev_configure(), ata_acpi_on_devcfg() is called, which performs _SDD and _GTF. _GTF is performed only after resuming and, if SATA, hardreset as the ACPI spec specifies. As _GTF may contain arbitrary commands, IDENTIFY page is re-read after _GTF taskfiles are executed. If one of ACPI methods fails, ata_acpi_on_devcfg() retries on the first failure. If it fails again on the second try, ACPI is disabled on the device. Note that successful configuration clears ACPI failed status. With all feature checks moved to the above two functions, do_drive_set_taskfiles() is trivial and thus collapsed into ata_acpi_exec_tfs(), which is now static and converted to return the number of executed taskfiles to be used by ata_acpi_on_resume(). As failures are handled properly, ata_acpi_push_id() now returns -errno on errors instead of unconditional zero. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 11:28:16 -07:00
static inline void ata_acpi_on_resume(struct ata_port *ap) { }
libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable() Add two hooks - ata_acpi_dissociate() which is called during driver detach after the whole host is shutdown and ata_acpi_on_disable() which is called when a device is disabled. Signed-off-by: Tejun heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-14 23:05:01 -07:00
static inline int ata_acpi_on_devcfg(struct ata_device *dev) { return 0; }
static inline void ata_acpi_on_disable(struct ata_device *dev) { }
libata-acpi: add ACPI _PSx method ACPI spec (ver 3.0a, p289) requires IDE power on/off executes ACPI _PSx methods. As recently most PATA drivers use libata, this patch adds _PSx method support in libata. ACPI spec doesn't mention if SATA requires the same _PSx method. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-01 18:32:38 -07:00
static inline void ata_acpi_set_state(struct ata_port *ap,
pm_message_t state) { }
[PATCH] libata: ACPI and _GTF support _GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
2006-09-28 11:29:01 -07:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* libata-scsi.c */
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 07:44:07 -07:00
extern int ata_scsi_add_hosts(struct ata_host *host,
struct scsi_host_template *sht);
libata: improve SCSI scan failure handling SCSI scan may fail due to memory allocation failure even if EH is not in progress. Due to use of GFP_ATOMIC in SCSI scan path, allocation failure isn't too rare especially while probing multiple devices at once which is the case when a bunch of devices are connected to PMP. This patch moves SCSI scan failure detetion logic from ata_scsi_hotplug() to ata_scsi_scan_host() and implement synchronous scan behavior. The synchronous path sleeps briefly and repeats SCSI scan if some devices aren't attached properly. It contains robust retry loop to minimize the chance of device misdetection during boot and falls back to async retry if everything fails. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 22:29:40 -07:00
extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
[PATCH] libata-hp: implement ata_eh_detach_dev() Implement ata_eh_detach_dev(). This function is responsible for detaching an ATA device and offlining the associated SCSI device atomically so that the detached device is not accessed after ATA detach is complete. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 02:28:01 -07:00
extern int ata_scsi_offline_dev(struct ata_device *dev);
libata-pmp-prep: implement sata_async_notification() AN serves multiple purposes. For ATAPI, it's used for media change notification. For PMP, for downstream PHY status change notification. Implement sata_async_notification() which demultiplexes AN. To avoid unnecessary port events, ATAPI AN is not enabled if PMP is attached but SNTF is not available. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 21:14:13 -07:00
extern void ata_scsi_media_change_notify(struct ata_device *dev);
WorkStruct: Pass the work_struct pointer instead of context data Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 07:55:48 -07:00
extern void ata_scsi_hotplug(struct work_struct *work);
[PATCH] libata-eh-fw: implement ata_port_schedule_eh() and ata_port_abort() ata_port_schedule_eh() directly schedules EH for @ap without associated qc. Once EH scheduled, no further qc is allowed and EH kicks in as soon as all currently active qc's are drained. ata_port_abort() schedules all currently active commands for EH by qc_completing them with ATA_QCFLAG_FAILED set. If ata_port_abort() doesn't find any qc to abort, it directly schedule EH using ata_port_schedule_eh(). These two functions provide ways to invoke EH for conditions which aren't directly related to any specfic qc. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 04:58:07 -07:00
extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
WorkStruct: Pass the work_struct pointer instead of context data Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 07:55:48 -07:00
extern void ata_scsi_dev_rescan(struct work_struct *work);
[PATCH] libata: Add support for SATA attachment to SAS adapters The following patch enhances libata to allow SAS device drivers to utilize libata to talk to SATA devices. It introduces some new APIs which allow libata to be used without allocating a virtual scsi host. New APIs: ata_sas_port_alloc - Allocate an ata_port ata_sas_port_init - Initialize an ata_port (probe device, etc) ata_sas_port_destroy - Free an ata_port allocated by ata_sas_port_alloc ata_sas_slave_configure - configure scsi device ata_sas_queuecmd - queue a scsi command, similar to ata_scsi_queuecomand These new APIs can be used either directly by a SAS LLDD or could be used by the SAS transport class. Possible usage for a SAS LLDD would be: scsi_scan_host target_alloc ata_sas_port_alloc slave_alloc ata_sas_port_init slave_configure ata_sas_slave_configure Commands received by the LLDD for SATA devices would call ata_sas_queuecmd. Device teardown would occur with: slave_destroy port_disable target_destroy ata_sas_port_destroy Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-07 12:27:31 -07:00
extern int ata_bus_probe(struct ata_port *ap);
[libata] Add ATA transport class This is a scheleton for libata transport class. All information is read only, exporting information from libata: - ata_port class: one per ATA port - ata_link class: one per ATA port or 15 for SATA Port Multiplier - ata_device class: up to 2 for PATA link, usually one for SATA. Signed-off-by: Gwendal Grignou <gwendal@google.com> Reviewed-by: Grant Grundler <grundler@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-25 12:31:38 -07:00
extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
unsigned int id, unsigned int lun);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] libata: separate out libata-eh.c A lot of EH codes are about to be added to libata. Separate out libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(), ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and ata_eh_qc_retry() are moved. No code is changed by this patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 02:51:53 -07:00
/* libata-eh.c */
libata: improve EH internal command timeout handling ATA_TMOUT_INTERNAL which was 30secs were used for all internal commands which is way too long when something goes wrong. This patch implements command type based stepped timeouts. Different command types can use different timeouts and each command type can use different timeout values after timeouts. ie. the initial timeout is set to a value which should cover most of the cases but not too long so that run away cases don't delay things too much. After the first try times out, the second try can use longer timeout and if that one times out too, it can go for full 30sec timeout. IDENTIFYs use 5s - 10s - 30s timeout and all other commands use 5s - 10s timeouts. This patch significantly cuts down the needed time to handle failure cases while still allowing libata to work with nut job devices through retries. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 10:17:54 -07:00
extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd);
extern void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd);
libata: implement cross-port EH exclusion In libata, the non-EH code paths should always take and release ap->lock explicitly when accessing hardware or shared data structures. However, once EH is active, it's assumed that the port is owned by EH and EH methods don't explicitly take ap->lock unless race from irq handler or other code paths are expected. However, libata EH didn't guarantee exclusion among EHs for ports of the same host. IOW, multiple EHs may execute in parallel on multiple ports of the same controller. In many cases, especially in SATA, the ports are completely independent of each other and this doesn't cause problems; however, there are cases where different ports share the same resource, which lead to obscure timing related bugs such as the one fixed by commit 213373cf (ata_piix: fix locking around SIDPR access). This patch implements exclusion among EHs of the same host. When EH begins, it acquires per-host EH ownership by calling ata_eh_acquire(). When EH finishes, the ownership is released by calling ata_eh_release(). EH ownership is also released whenever the EH thread goes to sleep from ata_msleep() or explicitly and reacquired after waking up. This ensures that while EH is actively accessing the hardware, it has exclusive access to it while allowing EHs to interleave and progress in parallel as they hit waiting stages, which dominate the time spent in EH. This achieves cross-port EH exclusion without pervasive and fragile changes while still allowing parallel EH for the most part. This was first reported by yuanding02@gmail.com more than three years ago in the following bugzilla. :-) https://bugzilla.kernel.org/show_bug.cgi?id=8223 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Reported-by: yuanding02@gmail.com Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-06 08:57:14 -07:00
extern void ata_eh_acquire(struct ata_port *ap);
extern void ata_eh_release(struct ata_port *ap);
block: unify request timeout handling Right now SCSI and others do their own command timeout handling. Move those bits to the block layer. Instead of having a timer per command, we try to be a bit more clever and simply have one per-queue. This avoids the overhead of having to tear down and setup a timer for each command, so it will result in a lot less timer fiddling. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-14 05:55:09 -07:00
extern enum blk_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
libata: Fix EH merge difference between this branch and upstream.
2006-04-11 10:04:39 -07:00
extern void ata_scsi_error(struct Scsi_Host *host);
libata: implement EH fast drain In most cases, when EH is scheduled, all in-flight commands are aborted causing EH to kick in immediately. However, in some cases (especially with PMP), it's unclear which commands are affected by the error condition and although aborting all in-flight commands work, it isn't optimal and may cause unnecessary disruption. On the other hand, waiting for in-flight commands to drain themselves can take up to 30seconds. This patch implements EH fast drain to handle such situations. It gives in-flight commands some time to finish up but doesn't wait for too long. After EH is scheduled, fast drain timer is started and if no other completion occurs in ATA_EH_FASTDRAIN_INTERVAL all in-flight commands are aborted. If any completion occurred in the interval, the port is given another interval to finish up itself. Currently ATA_EH_FASTDRAIN_INTERVAL is 3 secs which should be enough for finishing up most commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 22:29:41 -07:00
extern void ata_eh_fastdrain_timerfn(unsigned long arg);
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 04:58:05 -07:00
extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
libata: move ata_dev_disable() to libata-eh.c ata_dev_disable() is about to be more tightly integrated into EH logic. Move it to libata-eh.c. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:30 -07:00
extern void ata_dev_disable(struct ata_device *dev);
libata-pmp-prep: make a number of functions global to libata Make a number of functions from libata-core.c and libata-eh.c global to libata (drivers/ata/libata.h). These will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 21:14:12 -07:00
extern void ata_eh_detach_dev(struct ata_device *dev);
extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
unsigned int action);
extern void ata_eh_done(struct ata_link *link, struct ata_device *dev,
unsigned int action);
extern void ata_eh_autopsy(struct ata_port *ap);
libata: add command name parsing for error output This patch improve libata's output for error/notification messages to allow easier comprehension and debugging: When ATAPI commands issued through the SCSI layer fail, use SCSI functions to print the CDB in human-readable form instead of just dumping out the CDB in hex. Print out the name of the failed command (as defined by the ATA specification) in error handling output along with the raw register contents. When reporting status of ACPI taskfile commands executed on resume, also output the names of the commands being executed (or not) in readable form. Since the extra data for printing command names increases kernel size slightly, a config option has been added to allow disabling command name output (as well as some of the error register parsing) for those highly sensitive to kernel text size. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-14 19:43:39 -07:00
const char *ata_get_cmd_descript(u8 command);
libata-pmp-prep: make a number of functions global to libata Make a number of functions from libata-core.c and libata-eh.c global to libata (drivers/ata/libata.h). These will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 21:14:12 -07:00
extern void ata_eh_report(struct ata_port *ap);
extern int ata_eh_reset(struct ata_link *link, int classify,
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset);
libata: move ata_set_mode() to libata-eh.c Move ata_set_mode() to libata-eh.c. ata_set_mode() is surely an EH action and will be more tightly coupled with the rest of error handling. Move it to libata-eh.c. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:28:55 -07:00
extern int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
libata-pmp-prep: make a number of functions global to libata Make a number of functions from libata-core.c and libata-eh.c global to libata (drivers/ata/libata.h). These will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 21:14:12 -07:00
extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset,
struct ata_link **r_failed_disk);
extern void ata_eh_finish(struct ata_port *ap);
[libata] Add ATA transport class This is a scheleton for libata transport class. All information is read only, exporting information from libata: - ata_port class: one per ATA port - ata_link class: one per ATA port or 15 for SATA Port Multiplier - ata_device class: up to 2 for PATA link, usually one for SATA. Signed-off-by: Gwendal Grignou <gwendal@google.com> Reviewed-by: Grant Grundler <grundler@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-25 12:31:38 -07:00
extern int ata_ering_map(struct ata_ering *ering,
int (*map_fn)(struct ata_ering_entry *, void *),
void *arg);
[PATCH] libata: separate out libata-eh.c A lot of EH codes are about to be added to libata. Separate out libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(), ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and ata_eh_qc_retry() are moved. No code is changed by this patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 02:51:53 -07:00
libata: separate PMP support code from core code Most of PMP support code is already in libata-pmp.c. All that are in libata-core.c are sata_pmp_port_ops and EXPORTs. Move them to libata-pmp.c. Also, collect PMP related prototypes and declarations in header files and move them right above of SFF stuff. This change is to make PMP support optional. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 06:47:21 -07:00
/* libata-pmp.c */
libata: make PMP support optional Make PMP support optional by adding CONFIG_SATA_PMP and leaving out libata-pmp.c if it isn't set. PMP helpers return constant values if PMP support is not enabled and PMP declarations alias non-PMP counterparts. This makes the compiler to leave out PMP related part out and LLDs to use non-PMP counterparts automatically. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 06:47:22 -07:00
#ifdef CONFIG_SATA_PMP
libata: separate PMP support code from core code Most of PMP support code is already in libata-pmp.c. All that are in libata-core.c are sata_pmp_port_ops and EXPORTs. Move them to libata-pmp.c. Also, collect PMP related prototypes and declarations in header files and move them right above of SFF stuff. This change is to make PMP support optional. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 06:47:21 -07:00
extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val);
extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val);
libata: implement LPM support for port multipliers Port multipliers can do DIPM on fan-out links fine. Implement support for it. Tested w/ SIMG 57xx and marvell PMPs. Both the host and fan-out links enter power save modes nicely. SIMG 37xx and 47xx report link offline on SStatus causing EH to detach the devices. Blacklisted. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-01 08:50:07 -07:00
extern int sata_pmp_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
unsigned hints);
libata: separate PMP support code from core code Most of PMP support code is already in libata-pmp.c. All that are in libata-core.c are sata_pmp_port_ops and EXPORTs. Move them to libata-pmp.c. Also, collect PMP related prototypes and declarations in header files and move them right above of SFF stuff. This change is to make PMP support optional. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 06:47:21 -07:00
extern int sata_pmp_attach(struct ata_device *dev);
libata: make PMP support optional Make PMP support optional by adding CONFIG_SATA_PMP and leaving out libata-pmp.c if it isn't set. PMP helpers return constant values if PMP support is not enabled and PMP declarations alias non-PMP counterparts. This makes the compiler to leave out PMP related part out and LLDs to use non-PMP counterparts automatically. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 06:47:22 -07:00
#else /* CONFIG_SATA_PMP */
static inline int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val)
{
return -EINVAL;
}
static inline int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
{
return -EINVAL;
}
libata: implement LPM support for port multipliers Port multipliers can do DIPM on fan-out links fine. Implement support for it. Tested w/ SIMG 57xx and marvell PMPs. Both the host and fan-out links enter power save modes nicely. SIMG 37xx and 47xx report link offline on SStatus causing EH to detach the devices. Blacklisted. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-01 08:50:07 -07:00
static inline int sata_pmp_set_lpm(struct ata_link *link,
enum ata_lpm_policy policy, unsigned hints)
{
return -EINVAL;
}
libata: make PMP support optional Make PMP support optional by adding CONFIG_SATA_PMP and leaving out libata-pmp.c if it isn't set. PMP helpers return constant values if PMP support is not enabled and PMP declarations alias non-PMP counterparts. This makes the compiler to leave out PMP related part out and LLDs to use non-PMP counterparts automatically. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 06:47:22 -07:00
static inline int sata_pmp_attach(struct ata_device *dev)
{
return -EINVAL;
}
#endif /* CONFIG_SATA_PMP */
libata: separate PMP support code from core code Most of PMP support code is already in libata-pmp.c. All that are in libata-core.c are sata_pmp_port_ops and EXPORTs. Move them to libata-pmp.c. Also, collect PMP related prototypes and declarations in header files and move them right above of SFF stuff. This change is to make PMP support optional. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 06:47:21 -07:00
[PATCH] libata: move ata_irq_on() into libata-sff.c ata_irq_on() isn't used outside of libata core layer. The function is TF/SFF interface specific but currently used by core path with some hack too. Move it from include/linux/libata.h to drivers/ata/libata-sff.c. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-08 19:10:26 -07:00
/* libata-sff.c */
libata: make SFF support optional Now that SFF support is completely separated out from the core layer, it can be made optional. Add CONFIG_ATA_SFF and let SFF drivers depend on it. If CONFIG_ATA_SFF isn't set, all codes in libata-sff.c and data structures for SFF support are disabled. This saves good number of bytes for small systems. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 06:47:21 -07:00
#ifdef CONFIG_ATA_SFF
libata-sff: port_task is SFF specific port_task is tightly bound to the standard SFF PIO HSM implementation. Using it for any other purpose would be error-prone and there's no such user and if some drivers need such feature, it would be much better off using its own. Move it inside CONFIG_ATA_SFF and rename it to sff_pio_task. The only function which is exposed to the core layer is ata_sff_flush_pio_task() which is renamed from ata_port_flush_task() and now also takes care of resetting hsm_task_state to HSM_ST_IDLE, which is possible as it's now specific to PIO HSM. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-10 12:41:38 -07:00
extern void ata_sff_flush_pio_task(struct ata_port *ap);
libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init() In preparation of proper SFF/BMDMA separation, introduce ata_sff_init/exit() and ata_sff_port_init(). These functions currently don't do anything. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-10 12:41:35 -07:00
extern void ata_sff_port_init(struct ata_port *ap);
extern int ata_sff_init(void);
extern void ata_sff_exit(void);
#else /* CONFIG_ATA_SFF */
libata-sff: port_task is SFF specific port_task is tightly bound to the standard SFF PIO HSM implementation. Using it for any other purpose would be error-prone and there's no such user and if some drivers need such feature, it would be much better off using its own. Move it inside CONFIG_ATA_SFF and rename it to sff_pio_task. The only function which is exposed to the core layer is ata_sff_flush_pio_task() which is renamed from ata_port_flush_task() and now also takes care of resetting hsm_task_state to HSM_ST_IDLE, which is possible as it's now specific to PIO HSM. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-10 12:41:38 -07:00
static inline void ata_sff_flush_pio_task(struct ata_port *ap)
{ }
libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init() In preparation of proper SFF/BMDMA separation, introduce ata_sff_init/exit() and ata_sff_port_init(). These functions currently don't do anything. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-10 12:41:35 -07:00
static inline void ata_sff_port_init(struct ata_port *ap)
{ }
static inline int ata_sff_init(void)
{ return 0; }
static inline void ata_sff_exit(void)
{ }
libata: make SFF support optional Now that SFF support is completely separated out from the core layer, it can be made optional. Add CONFIG_ATA_SFF and let SFF drivers depend on it. If CONFIG_ATA_SFF isn't set, all codes in libata-sff.c and data structures for SFF support are disabled. This saves good number of bytes for small systems. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 06:47:21 -07:00
#endif /* CONFIG_ATA_SFF */
fix CONFIG_SATA_SIS=y compile error Static code shouldn't be used from other modules. drivers/built-in.o: In function `sis_init_one': sata_sis.c:(.text+0x7634cd): undefined reference to `sis_info133' sata_sis.c:(.text+0x7634d6): undefined reference to `sis_info133' While I was at it, I also moved the prototype of this struct to a header file. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30 01:59:17 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#endif /* __LIBATA_H__ */
Copy Permalink