kevin/linux
1
Fork 0
Code
d595d423d0
linux/drivers/edac/octeon_edac-lmc.c

324 lines
8.4 KiB
C
Raw Normal View History

MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2009 Wind River Systems,
* written by Ralf Baechle <ralf@linux-mips.org>
EDAC: Octeon: Add error injection support This adds an ad-hoc error injection method. Octeon II doesn't have hardware support for injection, so this simulates it. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: David Daney <david.daney@cavium.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-edac@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-20 15:46:41 -07:00
*
* Copyright (c) 2013 by Cisco Systems, Inc.
* All rights reserved.
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/edac.h>
EDAC: Octeon: Add error injection support This adds an ad-hoc error injection method. Octeon II doesn't have hardware support for injection, so this simulates it. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: David Daney <david.daney@cavium.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-edac@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-20 15:46:41 -07:00
#include <linux/ctype.h>
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-lmcx-defs.h>
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
#include "edac_module.h"
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
#define OCTEON_MAX_MC 4
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
EDAC: Octeon: Add error injection support This adds an ad-hoc error injection method. Octeon II doesn't have hardware support for injection, so this simulates it. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: David Daney <david.daney@cavium.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-edac@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-20 15:46:41 -07:00
#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
struct octeon_lmc_pvt {
unsigned long inject;
unsigned long error_type;
unsigned long dimm;
unsigned long rank;
unsigned long bank;
unsigned long row;
unsigned long col;
};
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
static void octeon_lmc_edac_poll(struct mem_ctl_info *mci)
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
{
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
union cvmx_lmcx_mem_cfg0 cfg0;
bool do_clear = false;
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
char msg[64];
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
cfg0.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(mci->mc_idx));
if (cfg0.s.sec_err || cfg0.s.ded_err) {
union cvmx_lmcx_fadr fadr;
fadr.u64 = cvmx_read_csr(CVMX_LMCX_FADR(mci->mc_idx));
snprintf(msg, sizeof(msg),
"DIMM %d rank %d bank %d row %d col %d",
fadr.cn30xx.fdimm, fadr.cn30xx.fbunk,
fadr.cn30xx.fbank, fadr.cn30xx.frow, fadr.cn30xx.fcol);
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
}
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
if (cfg0.s.sec_err) {
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0,
-1, -1, -1, msg, "");
cfg0.s.sec_err = -1; /* Done, re-arm */
do_clear = true;
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
}
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
if (cfg0.s.ded_err) {
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
-1, -1, -1, msg, "");
cfg0.s.ded_err = -1; /* Done, re-arm */
do_clear = true;
}
if (do_clear)
cvmx_write_csr(CVMX_LMCX_MEM_CFG0(mci->mc_idx), cfg0.u64);
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
}
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
static void octeon_lmc_edac_poll_o2(struct mem_ctl_info *mci)
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
{
EDAC: Octeon: Add error injection support This adds an ad-hoc error injection method. Octeon II doesn't have hardware support for injection, so this simulates it. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: David Daney <david.daney@cavium.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-edac@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-20 15:46:41 -07:00
struct octeon_lmc_pvt *pvt = mci->pvt_info;
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
union cvmx_lmcx_int int_reg;
bool do_clear = false;
char msg[64];
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
EDAC: Octeon: Add error injection support This adds an ad-hoc error injection method. Octeon II doesn't have hardware support for injection, so this simulates it. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: David Daney <david.daney@cavium.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-edac@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-20 15:46:41 -07:00
if (!pvt->inject)
int_reg.u64 = cvmx_read_csr(CVMX_LMCX_INT(mci->mc_idx));
else {
if (pvt->error_type == 1)
int_reg.s.sec_err = 1;
if (pvt->error_type == 2)
int_reg.s.ded_err = 1;
}
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
if (int_reg.s.sec_err || int_reg.s.ded_err) {
union cvmx_lmcx_fadr fadr;
EDAC: Octeon: Add error injection support This adds an ad-hoc error injection method. Octeon II doesn't have hardware support for injection, so this simulates it. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: David Daney <david.daney@cavium.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-edac@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-20 15:46:41 -07:00
if (likely(!pvt->inject))
fadr.u64 = cvmx_read_csr(CVMX_LMCX_FADR(mci->mc_idx));
else {
fadr.cn61xx.fdimm = pvt->dimm;
fadr.cn61xx.fbunk = pvt->rank;
fadr.cn61xx.fbank = pvt->bank;
fadr.cn61xx.frow = pvt->row;
fadr.cn61xx.fcol = pvt->col;
}
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
snprintf(msg, sizeof(msg),
"DIMM %d rank %d bank %d row %d col %d",
fadr.cn61xx.fdimm, fadr.cn61xx.fbunk,
fadr.cn61xx.fbank, fadr.cn61xx.frow, fadr.cn61xx.fcol);
}
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
if (int_reg.s.sec_err) {
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0,
-1, -1, -1, msg, "");
int_reg.s.sec_err = -1; /* Done, re-arm */
do_clear = true;
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
}
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
if (int_reg.s.ded_err) {
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
-1, -1, -1, msg, "");
int_reg.s.ded_err = -1; /* Done, re-arm */
do_clear = true;
}
EDAC: Octeon: Add error injection support This adds an ad-hoc error injection method. Octeon II doesn't have hardware support for injection, so this simulates it. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: David Daney <david.daney@cavium.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-edac@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-20 15:46:41 -07:00
if (do_clear) {
if (likely(!pvt->inject))
cvmx_write_csr(CVMX_LMCX_INT(mci->mc_idx), int_reg.u64);
else
pvt->inject = 0;
}
}
/************************ MC SYSFS parts ***********************************/
/* Only a couple naming differences per template, so very similar */
#define TEMPLATE_SHOW(reg) \
static ssize_t octeon_mc_inject_##reg##_show(struct device *dev, \
struct device_attribute *attr, \
char *data) \
{ \
struct mem_ctl_info *mci = to_mci(dev); \
struct octeon_lmc_pvt *pvt = mci->pvt_info; \
return sprintf(data, "%016llu\n", (u64)pvt->reg); \
}
#define TEMPLATE_STORE(reg) \
static ssize_t octeon_mc_inject_##reg##_store(struct device *dev, \
struct device_attribute *attr, \
const char *data, size_t count) \
{ \
struct mem_ctl_info *mci = to_mci(dev); \
struct octeon_lmc_pvt *pvt = mci->pvt_info; \
if (isdigit(*data)) { \
if (!kstrtoul(data, 0, &pvt->reg)) \
return count; \
} \
return 0; \
}
TEMPLATE_SHOW(inject);
TEMPLATE_STORE(inject);
TEMPLATE_SHOW(dimm);
TEMPLATE_STORE(dimm);
TEMPLATE_SHOW(bank);
TEMPLATE_STORE(bank);
TEMPLATE_SHOW(rank);
TEMPLATE_STORE(rank);
TEMPLATE_SHOW(row);
TEMPLATE_STORE(row);
TEMPLATE_SHOW(col);
TEMPLATE_STORE(col);
static ssize_t octeon_mc_inject_error_type_store(struct device *dev,
struct device_attribute *attr,
const char *data,
size_t count)
{
struct mem_ctl_info *mci = to_mci(dev);
struct octeon_lmc_pvt *pvt = mci->pvt_info;
if (!strncmp(data, "single", 6))
pvt->error_type = 1;
else if (!strncmp(data, "double", 6))
pvt->error_type = 2;
return count;
}
static ssize_t octeon_mc_inject_error_type_show(struct device *dev,
struct device_attribute *attr,
char *data)
{
struct mem_ctl_info *mci = to_mci(dev);
struct octeon_lmc_pvt *pvt = mci->pvt_info;
if (pvt->error_type == 1)
return sprintf(data, "single");
else if (pvt->error_type == 2)
return sprintf(data, "double");
return 0;
}
static DEVICE_ATTR(inject, S_IRUGO | S_IWUSR,
octeon_mc_inject_inject_show, octeon_mc_inject_inject_store);
static DEVICE_ATTR(error_type, S_IRUGO | S_IWUSR,
octeon_mc_inject_error_type_show, octeon_mc_inject_error_type_store);
static DEVICE_ATTR(dimm, S_IRUGO | S_IWUSR,
octeon_mc_inject_dimm_show, octeon_mc_inject_dimm_store);
static DEVICE_ATTR(rank, S_IRUGO | S_IWUSR,
octeon_mc_inject_rank_show, octeon_mc_inject_rank_store);
static DEVICE_ATTR(bank, S_IRUGO | S_IWUSR,
octeon_mc_inject_bank_show, octeon_mc_inject_bank_store);
static DEVICE_ATTR(row, S_IRUGO | S_IWUSR,
octeon_mc_inject_row_show, octeon_mc_inject_row_store);
static DEVICE_ATTR(col, S_IRUGO | S_IWUSR,
octeon_mc_inject_col_show, octeon_mc_inject_col_store);
EDAC: octeon: Use static attribute groups for sysfs entries ... instead of manual device_create_file() and device_remove_file() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: http://lkml.kernel.org/r/1423046938-18111-8-git-send-email-tiwai@suse.de Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-04 03:48:57 -07:00
static struct attribute *octeon_dev_attrs[] = {
&dev_attr_inject.attr,
&dev_attr_error_type.attr,
&dev_attr_dimm.attr,
&dev_attr_rank.attr,
&dev_attr_bank.attr,
&dev_attr_row.attr,
&dev_attr_col.attr,
NULL
};
EDAC: Octeon: Add error injection support This adds an ad-hoc error injection method. Octeon II doesn't have hardware support for injection, so this simulates it. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: David Daney <david.daney@cavium.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-edac@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-20 15:46:41 -07:00
EDAC: octeon: Use static attribute groups for sysfs entries ... instead of manual device_create_file() and device_remove_file() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: http://lkml.kernel.org/r/1423046938-18111-8-git-send-email-tiwai@suse.de Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-04 03:48:57 -07:00
ATTRIBUTE_GROUPS(octeon_dev);
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
Drivers: edac: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Olof Johansson <olof@lixom.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-21 14:23:51 -07:00
static int octeon_lmc_edac_probe(struct platform_device *pdev)
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
{
struct mem_ctl_info *mci;
struct edac_mc_layer layers[1];
int mc = pdev->id;
EDAC: Octeon: Fix lack of opstate_init If the opstate_init() isn't called the driver won't start properly. I just added it in what appears to be an appropriate place. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: David Daney <david.daney@cavium.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-edac@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5872/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-20 15:46:40 -07:00
opstate_init();
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
layers[0].type = EDAC_MC_LAYER_CHANNEL;
layers[0].size = 1;
layers[0].is_virt_csrow = false;
EDAC, octeon: Fix broken build due to model helper renames Commit debe6a623d3c ("MIPS: OCTEON: Update octeon-model.h code for new SoCs.") renamed some SoC model helper functions, but forgot to update the EDAC drivers resulting in build failures. Fix that. Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: David Daney <david.daney@cavium.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/1435747132-10954-1-git-send-email-aaro.koskinen@nokia.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-07-01 03:38:52 -07:00
if (OCTEON_IS_OCTEON1PLUS()) {
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
union cvmx_lmcx_mem_cfg0 cfg0;
cfg0.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(0));
if (!cfg0.s.ecc_ena) {
dev_info(&pdev->dev, "Disabled (ECC not enabled)\n");
return 0;
}
EDAC: Octeon: Add error injection support This adds an ad-hoc error injection method. Octeon II doesn't have hardware support for injection, so this simulates it. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: David Daney <david.daney@cavium.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-edac@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-20 15:46:41 -07:00
mci = edac_mc_alloc(mc, ARRAY_SIZE(layers), layers, sizeof(struct octeon_lmc_pvt));
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
if (!mci)
return -ENXIO;
mci->pdev = &pdev->dev;
mci->dev_name = dev_name(&pdev->dev);
mci->mod_name = "octeon-lmc";
mci->ctl_name = "octeon-lmc-err";
mci->edac_check = octeon_lmc_edac_poll;
EDAC: octeon: Use static attribute groups for sysfs entries ... instead of manual device_create_file() and device_remove_file() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: http://lkml.kernel.org/r/1423046938-18111-8-git-send-email-tiwai@suse.de Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-04 03:48:57 -07:00
if (edac_mc_add_mc_with_groups(mci, octeon_dev_groups)) {
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
dev_err(&pdev->dev, "edac_mc_add_mc() failed\n");
edac_mc_free(mci);
return -ENXIO;
}
cfg0.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(mc));
cfg0.s.intr_ded_ena = 0; /* We poll */
cfg0.s.intr_sec_ena = 0;
cvmx_write_csr(CVMX_LMCX_MEM_CFG0(mc), cfg0.u64);
} else {
/* OCTEON II */
union cvmx_lmcx_int_en en;
union cvmx_lmcx_config config;
config.u64 = cvmx_read_csr(CVMX_LMCX_CONFIG(0));
if (!config.s.ecc_ena) {
dev_info(&pdev->dev, "Disabled (ECC not enabled)\n");
return 0;
}
EDAC: Octeon: Add error injection support This adds an ad-hoc error injection method. Octeon II doesn't have hardware support for injection, so this simulates it. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: David Daney <david.daney@cavium.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-edac@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-20 15:46:41 -07:00
mci = edac_mc_alloc(mc, ARRAY_SIZE(layers), layers, sizeof(struct octeon_lmc_pvt));
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
if (!mci)
return -ENXIO;
mci->pdev = &pdev->dev;
mci->dev_name = dev_name(&pdev->dev);
mci->mod_name = "octeon-lmc";
mci->ctl_name = "co_lmc_err";
mci->edac_check = octeon_lmc_edac_poll_o2;
EDAC: octeon: Use static attribute groups for sysfs entries ... instead of manual device_create_file() and device_remove_file() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: http://lkml.kernel.org/r/1423046938-18111-8-git-send-email-tiwai@suse.de Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-04 03:48:57 -07:00
if (edac_mc_add_mc_with_groups(mci, octeon_dev_groups)) {
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
dev_err(&pdev->dev, "edac_mc_add_mc() failed\n");
edac_mc_free(mci);
return -ENXIO;
}
en.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(mc));
en.s.intr_ded_ena = 0; /* We poll */
en.s.intr_sec_ena = 0;
cvmx_write_csr(CVMX_LMCX_MEM_CFG0(mc), en.u64);
}
platform_set_drvdata(pdev, mci);
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
return 0;
}
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
static int octeon_lmc_edac_remove(struct platform_device *pdev)
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
{
struct mem_ctl_info *mci = platform_get_drvdata(pdev);
edac_mc_del_mc(&pdev->dev);
edac_mc_free(mci);
return 0;
}
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
static struct platform_driver octeon_lmc_edac_driver = {
.probe = octeon_lmc_edac_probe,
.remove = octeon_lmc_edac_remove,
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
.driver = {
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
.name = "octeon_lmc_edac",
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
}
};
MIPS/EDAC: Improve OCTEON EDAC support. Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-11-15 14:58:59 -07:00
module_platform_driver(octeon_lmc_edac_driver);
MIPS: Cavium: Add EDAC support. Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-16 15:39:09 -07:00
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
Copy Permalink