1
linux/drivers/misc/hmc6352.c

144 lines
3.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* hmc6352.c - Honeywell Compass Driver
*
* Copyright (C) 2009 Intel Corp
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/sysfs.h>
#include <linux/nospec.h>
static DEFINE_MUTEX(compass_mutex);
static int compass_command(struct i2c_client *c, u8 cmd)
{
int ret = i2c_master_send(c, &cmd, 1);
if (ret < 0)
dev_warn(&c->dev, "command '%c' failed.\n", cmd);
return ret;
}
static int compass_store(struct device *dev, const char *buf, size_t count,
const char *map)
{
struct i2c_client *c = to_i2c_client(dev);
int ret;
unsigned long val;
ret = kstrtoul(buf, 10, &val);
if (ret)
return ret;
if (val >= strlen(map))
return -EINVAL;
val = array_index_nospec(val, strlen(map));
mutex_lock(&compass_mutex);
ret = compass_command(c, map[val]);
mutex_unlock(&compass_mutex);
if (ret < 0)
return ret;
return count;
}
static ssize_t compass_calibration_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
return compass_store(dev, buf, count, "EC");
}
static ssize_t compass_power_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
return compass_store(dev, buf, count, "SW");
}
static ssize_t compass_heading_data_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
unsigned char i2c_data[2];
int ret;
mutex_lock(&compass_mutex);
ret = compass_command(client, 'A');
if (ret != 1) {
mutex_unlock(&compass_mutex);
return ret;
}
msleep(10); /* sending 'A' cmd we need to wait for 7-10 millisecs */
ret = i2c_master_recv(client, i2c_data, 2);
mutex_unlock(&compass_mutex);
if (ret < 0) {
dev_warn(dev, "i2c read data cmd failed\n");
return ret;
}
ret = (i2c_data[0] << 8) | i2c_data[1];
return sprintf(buf, "%d.%d\n", ret/10, ret%10);
}
static DEVICE_ATTR(heading0_input, S_IRUGO, compass_heading_data_show, NULL);
static DEVICE_ATTR(calibration, S_IWUSR, NULL, compass_calibration_store);
static DEVICE_ATTR(power_state, S_IWUSR, NULL, compass_power_mode_store);
static struct attribute *mid_att_compass[] = {
&dev_attr_heading0_input.attr,
&dev_attr_calibration.attr,
&dev_attr_power_state.attr,
NULL
};
static const struct attribute_group m_compass_gr = {
.name = "hmc6352",
.attrs = mid_att_compass
};
static int hmc6352_probe(struct i2c_client *client)
{
int res;
res = sysfs_create_group(&client->dev.kobj, &m_compass_gr);
if (res) {
dev_err(&client->dev, "device_create_file failed\n");
return res;
}
dev_info(&client->dev, "%s HMC6352 compass chip found\n",
client->name);
return 0;
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 01:02:30 -07:00
static void hmc6352_remove(struct i2c_client *client)
{
sysfs_remove_group(&client->dev.kobj, &m_compass_gr);
}
static const struct i2c_device_id hmc6352_id[] = {
{ "hmc6352" },
{ }
};
MODULE_DEVICE_TABLE(i2c, hmc6352_id);
static struct i2c_driver hmc6352_driver = {
.driver = {
.name = "hmc6352",
},
.probe = hmc6352_probe,
.remove = hmc6352_remove,
.id_table = hmc6352_id,
};
module_i2c_driver(hmc6352_driver);
MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com");
MODULE_DESCRIPTION("hmc6352 Compass Driver");
MODULE_LICENSE("GPL v2");