1
linux/net/8021q/vlan.c

728 lines
17 KiB
C
Raw Normal View History

/*
* INET 802.1Q VLAN
* Ethernet-type device handling.
*
* Authors: Ben Greear <greearb@candelatech.com>
* Please send support related email to: netdev@vger.kernel.org
* VLAN Home Page: http://www.candelatech.com/~greear/vlan.html
*
* Fixes:
* Fix for packet capture - Nick Eggleston <nick@dccinc.com>;
* Add HW acceleration hooks - David S. Miller <davem@redhat.com>;
* Correct all the locking - David S. Miller <davem@redhat.com>;
* Use hash table for VLAN groups - David S. Miller <davem@redhat.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/capability.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 01:04:11 -07:00
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/rculist.h>
#include <net/p8022.h>
#include <net/arp.h>
#include <linux/rtnetlink.h>
#include <linux/notifier.h>
#include <net/rtnetlink.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <asm/uaccess.h>
#include <linux/if_vlan.h>
#include "vlan.h"
#include "vlanproc.h"
#define DRV_VERSION "1.8"
/* Global VLAN variables */
int vlan_net_id __read_mostly;
const char vlan_fullname[] = "802.1Q VLAN Support";
const char vlan_version[] = DRV_VERSION;
static const char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>";
static const char vlan_buggyright[] = "David S. Miller <davem@redhat.com>";
static struct packet_type vlan_packet_type __read_mostly = {
.type = cpu_to_be16(ETH_P_8021Q),
.func = vlan_skb_recv, /* VLAN receive method */
};
/* End of global variables definitions. */
static void vlan_group_free(struct vlan_group *grp)
{
int i;
for (i = 0; i < VLAN_GROUP_ARRAY_SPLIT_PARTS; i++)
kfree(grp->vlan_devices_arrays[i]);
kfree(grp);
}
static struct vlan_group *vlan_group_alloc(struct net_device *real_dev)
{
struct vlan_group *grp;
grp = kzalloc(sizeof(struct vlan_group), GFP_KERNEL);
if (!grp)
return NULL;
grp->real_dev = real_dev;
return grp;
}
static int vlan_group_prealloc_vid(struct vlan_group *vg, u16 vlan_id)
{
struct net_device **array;
unsigned int size;
ASSERT_RTNL();
array = vg->vlan_devices_arrays[vlan_id / VLAN_GROUP_ARRAY_PART_LEN];
if (array != NULL)
return 0;
size = sizeof(struct net_device *) * VLAN_GROUP_ARRAY_PART_LEN;
array = kzalloc(size, GFP_KERNEL);
if (array == NULL)
return -ENOBUFS;
vg->vlan_devices_arrays[vlan_id / VLAN_GROUP_ARRAY_PART_LEN] = array;
return 0;
}
static void vlan_rcu_free(struct rcu_head *rcu)
{
vlan_group_free(container_of(rcu, struct vlan_group, rcu));
}
void unregister_vlan_dev(struct net_device *dev, struct list_head *head)
{
struct vlan_dev_info *vlan = vlan_dev_info(dev);
struct net_device *real_dev = vlan->real_dev;
const struct net_device_ops *ops = real_dev->netdev_ops;
struct vlan_group *grp;
u16 vlan_id = vlan->vlan_id;
ASSERT_RTNL();
grp = rtnl_dereference(real_dev->vlgrp);
BUG_ON(!grp);
/* Take it out of our own structures, but be sure to interlock with
* HW accelerating devices or SW vlan input packet processing if
* VLAN is not 0 (leave it there for 802.1p).
*/
if (vlan_id && (real_dev->features & NETIF_F_HW_VLAN_FILTER))
ops->ndo_vlan_rx_kill_vid(real_dev, vlan_id);
grp->nr_vlans--;
vlan: fix GVRP at dismantle time ip link add link eth2 eth2.103 type vlan id 103 gvrp on loose_binding on ip link set eth2.103 up rmmod tg3 # driver providing eth2 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp] PGD 11d251067 PUD 11b9e0067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/net/eth2.104/ifindex CPU 0 Modules linked in: tg3(-) 8021q garp nfsd lockd auth_rpcgss sunrpc libphy sg [last unloaded: x_tables] Pid: 11494, comm: rmmod Tainted: G W 2.6.39-rc6-00261-gfd71257-dirty #580 HP ProLiant BL460c G6 RIP: 0010:[<ffffffffa0030c9e>] [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp] RSP: 0018:ffff88007a19bae8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88011b5e2000 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000175 RDI: ffffffffa0030d5b RBP: ffff88007a19bb18 R08: 0000000000000001 R09: ffff88011bd64a00 R10: ffff88011d34ec00 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88007a19bc48 R14: ffff88007a19bb88 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88011fc00000(0063) knlGS:00000000f77d76c0 CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000011a675000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 11494, threadinfo ffff88007a19a000, task ffff8800798595c0) Stack: ffff88007a19bb36 ffff88011c84b800 ffff88011b5e2000 ffff88007a19bc48 ffff88007a19bb88 0000000000000006 ffff88007a19bb38 ffffffffa003a5f6 ffff88007a19bb38 670088007a19bba8 ffff88007a19bb58 ffffffffa00397e7 Call Trace: [<ffffffffa003a5f6>] vlan_gvrp_request_leave+0x46/0x50 [8021q] [<ffffffffa00397e7>] vlan_dev_stop+0xb7/0xc0 [8021q] [<ffffffff8137e427>] __dev_close_many+0x87/0xe0 [<ffffffff8137e507>] dev_close_many+0x87/0x110 [<ffffffff8137e630>] rollback_registered_many+0xa0/0x240 [<ffffffff8137e7e9>] unregister_netdevice_many+0x19/0x60 [<ffffffffa00389eb>] vlan_device_event+0x53b/0x550 [8021q] [<ffffffff8143f448>] ? ip6mr_device_event+0xa8/0xd0 [<ffffffff81479d03>] notifier_call_chain+0x53/0x80 [<ffffffff81062539>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff81062551>] raw_notifier_call_chain+0x11/0x20 [<ffffffff8137df82>] call_netdevice_notifiers+0x32/0x60 [<ffffffff8137e69f>] rollback_registered_many+0x10f/0x240 [<ffffffff8137e85f>] rollback_registered+0x2f/0x40 [<ffffffff8137e8c8>] unregister_netdevice_queue+0x58/0x90 [<ffffffff8137e9eb>] unregister_netdev+0x1b/0x30 [<ffffffffa005d73f>] tg3_remove_one+0x6f/0x10b [tg3] We should call vlan_gvrp_request_leave() from unregister_vlan_dev(), not from vlan_dev_stop(), because vlan_gvrp_uninit_applicant() is called right after unregister_netdevice_queue(). In batch mode, unregister_netdevice_queue() doesn’t immediately call vlan_dev_stop(). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10 12:22:54 -07:00
if (vlan->flags & VLAN_FLAG_GVRP)
vlan_gvrp_request_leave(dev);
vlan_group_set_device(grp, vlan_id, NULL);
if (!grp->killall)
synchronize_net();
unregister_netdevice_queue(dev, head);
/* If the group is now empty, kill off the group. */
if (grp->nr_vlans == 0) {
vlan_gvrp_uninit_applicant(real_dev);
rcu_assign_pointer(real_dev->vlgrp, NULL);
vlan: Centralize handling of hardware acceleration. Currently each driver that is capable of vlan hardware acceleration must be aware of the vlan groups that are configured and then pass the stripped tag to a specialized receive function. This is different from other types of hardware offload in that it places a significant amount of knowledge in the driver itself rather keeping it in the networking core. This makes vlan offloading function more similarly to other forms of offloading (such as checksum offloading or TSO) by doing the following: * On receive, stripped vlans are passed directly to the network core, without attempting to check for vlan groups or reconstructing the header if no group * vlans are made less special by folding the logic into the main receive routines * On transmit, the device layer will add the vlan header in software if the hardware doesn't support it, instead of spreading that logic out in upper layers, such as bonding. There are a number of advantages to this: * Fixes all bugs with drivers incorrectly dropping vlan headers at once. * Avoids having to disable VLAN acceleration when in promiscuous mode (good for bridging since it always puts devices in promiscuous mode). * Keeps VLAN tag separate until given to ultimate consumer, which avoids needing to do header reconstruction as in tg3 unless absolutely necessary. * Consolidates common code in core networking. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 06:56:06 -07:00
if (ops->ndo_vlan_rx_register)
ops->ndo_vlan_rx_register(real_dev, NULL);
/* Free the group, after all cpu's are done. */
call_rcu(&grp->rcu, vlan_rcu_free);
}
/* Get rid of the vlan's reference to real_dev */
dev_put(real_dev);
}
int vlan_check_real_dev(struct net_device *real_dev, u16 vlan_id)
{
const char *name = real_dev->name;
const struct net_device_ops *ops = real_dev->netdev_ops;
if (real_dev->features & NETIF_F_VLAN_CHALLENGED) {
pr_info("8021q: VLANs not supported on %s\n", name);
return -EOPNOTSUPP;
}
if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) &&
(!ops->ndo_vlan_rx_add_vid || !ops->ndo_vlan_rx_kill_vid)) {
pr_info("8021q: Device %s has buggy VLAN hw accel\n", name);
return -EOPNOTSUPP;
}
if (vlan_find_dev(real_dev, vlan_id) != NULL)
return -EEXIST;
return 0;
}
int register_vlan_dev(struct net_device *dev)
{
struct vlan_dev_info *vlan = vlan_dev_info(dev);
struct net_device *real_dev = vlan->real_dev;
const struct net_device_ops *ops = real_dev->netdev_ops;
u16 vlan_id = vlan->vlan_id;
struct vlan_group *grp, *ngrp = NULL;
int err;
grp = rtnl_dereference(real_dev->vlgrp);
if (!grp) {
ngrp = grp = vlan_group_alloc(real_dev);
if (!grp)
return -ENOBUFS;
err = vlan_gvrp_init_applicant(real_dev);
if (err < 0)
goto out_free_group;
}
err = vlan_group_prealloc_vid(grp, vlan_id);
if (err < 0)
goto out_uninit_applicant;
err = register_netdevice(dev);
if (err < 0)
goto out_uninit_applicant;
/* Account for reference in struct vlan_dev_info */
dev_hold(real_dev);
netif_stacked_transfer_operstate(real_dev, dev);
linkwatch_fire_event(dev); /* _MUST_ call rfc2863_policy() */
/* So, got the sucker initialized, now lets place
* it into our local structure.
*/
vlan_group_set_device(grp, vlan_id, dev);
grp->nr_vlans++;
if (ngrp) {
vlan: Centralize handling of hardware acceleration. Currently each driver that is capable of vlan hardware acceleration must be aware of the vlan groups that are configured and then pass the stripped tag to a specialized receive function. This is different from other types of hardware offload in that it places a significant amount of knowledge in the driver itself rather keeping it in the networking core. This makes vlan offloading function more similarly to other forms of offloading (such as checksum offloading or TSO) by doing the following: * On receive, stripped vlans are passed directly to the network core, without attempting to check for vlan groups or reconstructing the header if no group * vlans are made less special by folding the logic into the main receive routines * On transmit, the device layer will add the vlan header in software if the hardware doesn't support it, instead of spreading that logic out in upper layers, such as bonding. There are a number of advantages to this: * Fixes all bugs with drivers incorrectly dropping vlan headers at once. * Avoids having to disable VLAN acceleration when in promiscuous mode (good for bridging since it always puts devices in promiscuous mode). * Keeps VLAN tag separate until given to ultimate consumer, which avoids needing to do header reconstruction as in tg3 unless absolutely necessary. * Consolidates common code in core networking. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 06:56:06 -07:00
if (ops->ndo_vlan_rx_register)
ops->ndo_vlan_rx_register(real_dev, ngrp);
rcu_assign_pointer(real_dev->vlgrp, ngrp);
}
if (real_dev->features & NETIF_F_HW_VLAN_FILTER)
ops->ndo_vlan_rx_add_vid(real_dev, vlan_id);
return 0;
out_uninit_applicant:
if (ngrp)
vlan_gvrp_uninit_applicant(real_dev);
out_free_group:
if (ngrp) {
/* Free the group, after all cpu's are done. */
call_rcu(&ngrp->rcu, vlan_rcu_free);
}
return err;
}
/* Attach a VLAN device to a mac address (ie Ethernet Card).
* Returns 0 if the device was created or a negative error code otherwise.
*/
static int register_vlan_device(struct net_device *real_dev, u16 vlan_id)
{
struct net_device *new_dev;
struct net *net = dev_net(real_dev);
struct vlan_net *vn = net_generic(net, vlan_net_id);
char name[IFNAMSIZ];
int err;
if (vlan_id >= VLAN_VID_MASK)
return -ERANGE;
err = vlan_check_real_dev(real_dev, vlan_id);
if (err < 0)
return err;
/* Gotta set up the fields for the device. */
switch (vn->name_type) {
case VLAN_NAME_TYPE_RAW_PLUS_VID:
/* name will look like: eth1.0005 */
snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, vlan_id);
break;
case VLAN_NAME_TYPE_PLUS_VID_NO_PAD:
/* Put our vlan.VID in the name.
* Name will look like: vlan5
*/
snprintf(name, IFNAMSIZ, "vlan%i", vlan_id);
break;
case VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD:
/* Put our vlan.VID in the name.
* Name will look like: eth0.5
*/
snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, vlan_id);
break;
case VLAN_NAME_TYPE_PLUS_VID:
/* Put our vlan.VID in the name.
* Name will look like: vlan0005
*/
default:
snprintf(name, IFNAMSIZ, "vlan%.4i", vlan_id);
}
new_dev = alloc_netdev(sizeof(struct vlan_dev_info), name, vlan_setup);
if (new_dev == NULL)
return -ENOBUFS;
dev_net_set(new_dev, net);
/* need 4 bytes for extra VLAN header info,
* hope the underlying device can handle it.
*/
new_dev->mtu = real_dev->mtu;
vlan_dev_info(new_dev)->vlan_id = vlan_id;
vlan_dev_info(new_dev)->real_dev = real_dev;
vlan_dev_info(new_dev)->dent = NULL;
vlan_dev_info(new_dev)->flags = VLAN_FLAG_REORDER_HDR;
new_dev->rtnl_link_ops = &vlan_link_ops;
err = register_vlan_dev(new_dev);
if (err < 0)
goto out_free_newdev;
return 0;
out_free_newdev:
free_netdev(new_dev);
return err;
}
static void vlan_sync_address(struct net_device *dev,
struct net_device *vlandev)
{
struct vlan_dev_info *vlan = vlan_dev_info(vlandev);
/* May be called without an actual change */
if (!compare_ether_addr(vlan->real_dev_addr, dev->dev_addr))
return;
/* vlan address was different from the old address and is equal to
* the new address */
if (compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
!compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
dev_uc_del(dev, vlandev->dev_addr);
/* vlan address was equal to the old address and is different from
* the new address */
if (!compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
dev_uc_add(dev, vlandev->dev_addr);
memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
}
static void vlan_transfer_features(struct net_device *dev,
struct net_device *vlandev)
{
u32 old_features = vlandev->features;
vlandev->features &= ~dev->vlan_features;
vlandev->features |= dev->features & dev->vlan_features;
vlandev->gso_max_size = dev->gso_max_size;
if (dev->features & NETIF_F_HW_VLAN_TX)
vlandev->hard_header_len = dev->hard_header_len;
else
vlandev->hard_header_len = dev->hard_header_len + VLAN_HLEN;
#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
vlandev->fcoe_ddp_xid = dev->fcoe_ddp_xid;
#endif
if (old_features != vlandev->features)
netdev_features_change(vlandev);
}
static void __vlan_device_event(struct net_device *dev, unsigned long event)
{
switch (event) {
case NETDEV_CHANGENAME:
vlan_proc_rem_dev(dev);
if (vlan_proc_add_dev(dev) < 0)
pr_warning("8021q: failed to change proc name for %s\n",
dev->name);
break;
case NETDEV_REGISTER:
if (vlan_proc_add_dev(dev) < 0)
pr_warning("8021q: failed to add proc entry for %s\n",
dev->name);
break;
case NETDEV_UNREGISTER:
vlan_proc_rem_dev(dev);
break;
}
}
static int vlan_device_event(struct notifier_block *unused, unsigned long event,
void *ptr)
{
struct net_device *dev = ptr;
struct vlan_group *grp;
int i, flgs;
struct net_device *vlandev;
struct vlan_dev_info *vlan;
LIST_HEAD(list);
if (is_vlan_dev(dev))
__vlan_device_event(dev, event);
if ((event == NETDEV_UP) &&
(dev->features & NETIF_F_HW_VLAN_FILTER) &&
dev->netdev_ops->ndo_vlan_rx_add_vid) {
pr_info("8021q: adding VLAN 0 to HW filter on device %s\n",
dev->name);
dev->netdev_ops->ndo_vlan_rx_add_vid(dev, 0);
}
grp = rtnl_dereference(dev->vlgrp);
if (!grp)
goto out;
/* It is OK that we do not hold the group lock right now,
* as we run under the RTNL lock.
*/
switch (event) {
case NETDEV_CHANGE:
/* Propagate real device state to vlan devices */
for (i = 0; i < VLAN_N_VID; i++) {
vlandev = vlan_group_get_device(grp, i);
if (!vlandev)
continue;
netif_stacked_transfer_operstate(dev, vlandev);
}
break;
case NETDEV_CHANGEADDR:
/* Adjust unicast filters on underlying device */
for (i = 0; i < VLAN_N_VID; i++) {
vlandev = vlan_group_get_device(grp, i);
if (!vlandev)
continue;
flgs = vlandev->flags;
if (!(flgs & IFF_UP))
continue;
vlan_sync_address(dev, vlandev);
}
break;
case NETDEV_CHANGEMTU:
for (i = 0; i < VLAN_N_VID; i++) {
vlandev = vlan_group_get_device(grp, i);
if (!vlandev)
continue;
if (vlandev->mtu <= dev->mtu)
continue;
dev_set_mtu(vlandev, dev->mtu);
}
break;
case NETDEV_FEAT_CHANGE:
/* Propagate device features to underlying device */
for (i = 0; i < VLAN_N_VID; i++) {
vlandev = vlan_group_get_device(grp, i);
if (!vlandev)
continue;
vlan_transfer_features(dev, vlandev);
}
break;
case NETDEV_DOWN:
/* Put all VLANs for this dev in the down state too. */
for (i = 0; i < VLAN_N_VID; i++) {
vlandev = vlan_group_get_device(grp, i);
if (!vlandev)
continue;
flgs = vlandev->flags;
if (!(flgs & IFF_UP))
continue;
vlan = vlan_dev_info(vlandev);
if (!(vlan->flags & VLAN_FLAG_LOOSE_BINDING))
dev_change_flags(vlandev, flgs & ~IFF_UP);
netif_stacked_transfer_operstate(dev, vlandev);
}
break;
case NETDEV_UP:
/* Put all VLANs for this dev in the up state too. */
for (i = 0; i < VLAN_N_VID; i++) {
vlandev = vlan_group_get_device(grp, i);
if (!vlandev)
continue;
flgs = vlandev->flags;
if (flgs & IFF_UP)
continue;
vlan = vlan_dev_info(vlandev);
if (!(vlan->flags & VLAN_FLAG_LOOSE_BINDING))
dev_change_flags(vlandev, flgs | IFF_UP);
netif_stacked_transfer_operstate(dev, vlandev);
}
break;
case NETDEV_UNREGISTER:
/* twiddle thumbs on netns device moves */
if (dev->reg_state != NETREG_UNREGISTERING)
break;
/* Delete all VLANs for this dev. */
grp->killall = 1;
for (i = 0; i < VLAN_N_VID; i++) {
vlandev = vlan_group_get_device(grp, i);
if (!vlandev)
continue;
/* unregistration of last vlan destroys group, abort
* afterwards */
if (grp->nr_vlans == 1)
i = VLAN_N_VID;
unregister_vlan_dev(vlandev, &list);
}
unregister_netdevice_many(&list);
break;
case NETDEV_PRE_TYPE_CHANGE:
/* Forbid underlaying device to change its type. */
return NOTIFY_BAD;
}
out:
return NOTIFY_DONE;
}
static struct notifier_block vlan_notifier_block __read_mostly = {
.notifier_call = vlan_device_event,
};
/*
* VLAN IOCTL handler.
* o execute requested action or pass command to the device driver
* arg is really a struct vlan_ioctl_args __user *.
*/
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 11:56:21 -07:00
static int vlan_ioctl_handler(struct net *net, void __user *arg)
{
int err;
struct vlan_ioctl_args args;
struct net_device *dev = NULL;
if (copy_from_user(&args, arg, sizeof(struct vlan_ioctl_args)))
return -EFAULT;
/* Null terminate this sucker, just in case. */
args.device1[23] = 0;
args.u.device2[23] = 0;
rtnl_lock();
switch (args.cmd) {
case SET_VLAN_INGRESS_PRIORITY_CMD:
case SET_VLAN_EGRESS_PRIORITY_CMD:
case SET_VLAN_FLAG_CMD:
case ADD_VLAN_CMD:
case DEL_VLAN_CMD:
case GET_VLAN_REALDEV_NAME_CMD:
case GET_VLAN_VID_CMD:
err = -ENODEV;
dev = __dev_get_by_name(net, args.device1);
if (!dev)
goto out;
err = -EINVAL;
if (args.cmd != ADD_VLAN_CMD && !is_vlan_dev(dev))
goto out;
}
switch (args.cmd) {
case SET_VLAN_INGRESS_PRIORITY_CMD:
err = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
vlan_dev_set_ingress_priority(dev,
args.u.skb_priority,
args.vlan_qos);
err = 0;
break;
case SET_VLAN_EGRESS_PRIORITY_CMD:
err = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
err = vlan_dev_set_egress_priority(dev,
args.u.skb_priority,
args.vlan_qos);
break;
case SET_VLAN_FLAG_CMD:
err = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
err = vlan_dev_change_flags(dev,
args.vlan_qos ? args.u.flag : 0,
args.u.flag);
break;
case SET_VLAN_NAME_TYPE_CMD:
err = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
if ((args.u.name_type >= 0) &&
(args.u.name_type < VLAN_NAME_TYPE_HIGHEST)) {
struct vlan_net *vn;
vn = net_generic(net, vlan_net_id);
vn->name_type = args.u.name_type;
err = 0;
} else {
err = -EINVAL;
}
break;
case ADD_VLAN_CMD:
err = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
err = register_vlan_device(dev, args.u.VID);
break;
case DEL_VLAN_CMD:
err = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
unregister_vlan_dev(dev, NULL);
err = 0;
break;
case GET_VLAN_REALDEV_NAME_CMD:
err = 0;
vlan_dev_get_realdev_name(dev, args.u.device2);
if (copy_to_user(arg, &args,
sizeof(struct vlan_ioctl_args)))
err = -EFAULT;
break;
case GET_VLAN_VID_CMD:
err = 0;
args.u.VID = vlan_dev_vlan_id(dev);
if (copy_to_user(arg, &args,
sizeof(struct vlan_ioctl_args)))
err = -EFAULT;
break;
default:
err = -EOPNOTSUPP;
break;
}
out:
rtnl_unlock();
return err;
}
static int __net_init vlan_init_net(struct net *net)
{
struct vlan_net *vn = net_generic(net, vlan_net_id);
int err;
vn->name_type = VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD;
err = vlan_proc_init(net);
return err;
}
static void __net_exit vlan_exit_net(struct net *net)
{
vlan_proc_cleanup(net);
}
static struct pernet_operations vlan_net_ops = {
.init = vlan_init_net,
.exit = vlan_exit_net,
.id = &vlan_net_id,
.size = sizeof(struct vlan_net),
};
static int __init vlan_proto_init(void)
{
int err;
pr_info("%s v%s %s\n", vlan_fullname, vlan_version, vlan_copyright);
pr_info("All bugs added by %s\n", vlan_buggyright);
err = register_pernet_subsys(&vlan_net_ops);
if (err < 0)
goto err0;
err = register_netdevice_notifier(&vlan_notifier_block);
if (err < 0)
goto err2;
err = vlan_gvrp_init();
if (err < 0)
goto err3;
err = vlan_netlink_init();
if (err < 0)
goto err4;
dev_add_pack(&vlan_packet_type);
vlan_ioctl_set(vlan_ioctl_handler);
return 0;
err4:
vlan_gvrp_uninit();
err3:
unregister_netdevice_notifier(&vlan_notifier_block);
err2:
unregister_pernet_subsys(&vlan_net_ops);
err0:
return err;
}
static void __exit vlan_cleanup_module(void)
{
vlan_ioctl_set(NULL);
vlan_netlink_fini();
unregister_netdevice_notifier(&vlan_notifier_block);
dev_remove_pack(&vlan_packet_type);
unregister_pernet_subsys(&vlan_net_ops);
rcu_barrier(); /* Wait for completion of call_rcu()'s */
vlan_gvrp_uninit();
}
module_init(vlan_proto_init);
module_exit(vlan_cleanup_module);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);