1
linux/drivers/pwm/pwm-stm32-lp.c

262 lines
6.3 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* STM32 Low-Power Timer PWM driver
*
* Copyright (C) STMicroelectronics 2017
*
* Author: Gerald Baeza <gerald.baeza@st.com>
*
* Inspired by Gerald Baeza's pwm-stm32 driver
*/
#include <linux/bitfield.h>
#include <linux/mfd/stm32-lptimer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
struct stm32_pwm_lp {
struct clk *clk;
struct regmap *regmap;
};
static inline struct stm32_pwm_lp *to_stm32_pwm_lp(struct pwm_chip *chip)
{
return pwmchip_get_drvdata(chip);
}
/* STM32 Low-Power Timer is preceded by a configurable power-of-2 prescaler */
#define STM32_LPTIM_MAX_PRESCALER 128
static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
unsigned long long prd, div, dty;
struct pwm_state cstate;
u32 val, mask, cfgr, presc = 0;
bool reenable;
int ret;
pwm_get_state(pwm, &cstate);
reenable = !cstate.enabled;
if (!state->enabled) {
if (cstate.enabled) {
/* Disable LP timer */
ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
if (ret)
return ret;
/* disable clock to PWM counter */
clk_disable(priv->clk);
}
return 0;
}
/* Calculate the period and prescaler value */
div = (unsigned long long)clk_get_rate(priv->clk) * state->period;
do_div(div, NSEC_PER_SEC);
if (!div) {
/* Clock is too slow to achieve requested period. */
dev_dbg(pwmchip_parent(chip), "Can't reach %llu ns\n", state->period);
return -EINVAL;
}
prd = div;
while (div > STM32_LPTIM_MAX_ARR) {
presc++;
if ((1 << presc) > STM32_LPTIM_MAX_PRESCALER) {
dev_err(pwmchip_parent(chip), "max prescaler exceeded\n");
return -EINVAL;
}
div = prd >> presc;
}
prd = div;
/* Calculate the duty cycle */
dty = prd * state->duty_cycle;
do_div(dty, state->period);
if (!cstate.enabled) {
/* enable clock to drive PWM counter */
ret = clk_enable(priv->clk);
if (ret)
return ret;
}
ret = regmap_read(priv->regmap, STM32_LPTIM_CFGR, &cfgr);
if (ret)
goto err;
if ((FIELD_GET(STM32_LPTIM_PRESC, cfgr) != presc) ||
(FIELD_GET(STM32_LPTIM_WAVPOL, cfgr) != state->polarity)) {
val = FIELD_PREP(STM32_LPTIM_PRESC, presc);
val |= FIELD_PREP(STM32_LPTIM_WAVPOL, state->polarity);
mask = STM32_LPTIM_PRESC | STM32_LPTIM_WAVPOL;
/* Must disable LP timer to modify CFGR */
reenable = true;
ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
if (ret)
goto err;
ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask,
val);
if (ret)
goto err;
}
if (reenable) {
/* Must (re)enable LP timer to modify CMP & ARR */
ret = regmap_write(priv->regmap, STM32_LPTIM_CR,
STM32_LPTIM_ENABLE);
if (ret)
goto err;
}
ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, prd - 1);
if (ret)
goto err;
ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, prd - (1 + dty));
if (ret)
goto err;
/* ensure CMP & ARR registers are properly written */
ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
(val & STM32_LPTIM_CMPOK_ARROK) == STM32_LPTIM_CMPOK_ARROK,
100, 1000);
if (ret) {
dev_err(pwmchip_parent(chip), "ARR/CMP registers write issue\n");
goto err;
}
ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
STM32_LPTIM_CMPOKCF_ARROKCF);
if (ret)
goto err;
if (reenable) {
/* Start LP timer in continuous mode */
ret = regmap_set_bits(priv->regmap, STM32_LPTIM_CR,
STM32_LPTIM_CNTSTRT);
if (ret) {
regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
goto err;
}
}
return 0;
err:
if (!cstate.enabled)
clk_disable(priv->clk);
return ret;
}
pwm: Make .get_state() callback return an error code .get_state() might fail in some cases. To make it possible that a driver signals such a failure change the prototype of .get_state() to return an error code. This patch was created using coccinelle and the following semantic patch: @p1@ identifier getstatefunc; identifier driver; @@ struct pwm_ops driver = { ..., .get_state = getstatefunc ,... }; @p2@ identifier p1.getstatefunc; identifier chip, pwm, state; @@ -void +int getstatefunc(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state) { ... - return; + return 0; ... } plus the actual change of the prototype in include/linux/pwm.h (plus some manual fixing of indentions and empty lines). So for now all drivers return success unconditionally. They are adapted in the following patches to make the changes easier reviewable. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Douglas Anderson <dianders@chromium.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221130152148.2769768-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-12-02 11:35:26 -07:00
static int stm32_pwm_lp_get_state(struct pwm_chip *chip,
struct pwm_device *pwm,
struct pwm_state *state)
{
struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
unsigned long rate = clk_get_rate(priv->clk);
u32 val, presc, prd;
u64 tmp;
regmap_read(priv->regmap, STM32_LPTIM_CR, &val);
state->enabled = !!FIELD_GET(STM32_LPTIM_ENABLE, val);
/* Keep PWM counter clock refcount in sync with PWM initial state */
if (state->enabled)
clk_enable(priv->clk);
regmap_read(priv->regmap, STM32_LPTIM_CFGR, &val);
presc = FIELD_GET(STM32_LPTIM_PRESC, val);
state->polarity = FIELD_GET(STM32_LPTIM_WAVPOL, val);
regmap_read(priv->regmap, STM32_LPTIM_ARR, &prd);
tmp = prd + 1;
tmp = (tmp << presc) * NSEC_PER_SEC;
state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
regmap_read(priv->regmap, STM32_LPTIM_CMP, &val);
tmp = prd - val;
tmp = (tmp << presc) * NSEC_PER_SEC;
state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
pwm: Make .get_state() callback return an error code .get_state() might fail in some cases. To make it possible that a driver signals such a failure change the prototype of .get_state() to return an error code. This patch was created using coccinelle and the following semantic patch: @p1@ identifier getstatefunc; identifier driver; @@ struct pwm_ops driver = { ..., .get_state = getstatefunc ,... }; @p2@ identifier p1.getstatefunc; identifier chip, pwm, state; @@ -void +int getstatefunc(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state) { ... - return; + return 0; ... } plus the actual change of the prototype in include/linux/pwm.h (plus some manual fixing of indentions and empty lines). So for now all drivers return success unconditionally. They are adapted in the following patches to make the changes easier reviewable. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Douglas Anderson <dianders@chromium.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221130152148.2769768-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-12-02 11:35:26 -07:00
return 0;
}
static const struct pwm_ops stm32_pwm_lp_ops = {
.apply = stm32_pwm_lp_apply,
.get_state = stm32_pwm_lp_get_state,
};
static int stm32_pwm_lp_probe(struct platform_device *pdev)
{
struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
struct stm32_pwm_lp *priv;
struct pwm_chip *chip;
int ret;
chip = devm_pwmchip_alloc(&pdev->dev, 1, sizeof(*priv));
if (IS_ERR(chip))
return PTR_ERR(chip);
priv = to_stm32_pwm_lp(chip);
priv->regmap = ddata->regmap;
priv->clk = ddata->clk;
chip->ops = &stm32_pwm_lp_ops;
ret = devm_pwmchip_add(&pdev->dev, chip);
if (ret < 0)
return ret;
platform_set_drvdata(pdev, chip);
return 0;
}
static int stm32_pwm_lp_suspend(struct device *dev)
{
struct pwm_chip *chip = dev_get_drvdata(dev);
struct pwm_state state;
pwm_get_state(&chip->pwms[0], &state);
if (state.enabled) {
dev_err(dev, "The consumer didn't stop us (%s)\n",
chip->pwms[0].label);
return -EBUSY;
}
return pinctrl_pm_select_sleep_state(dev);
}
static int stm32_pwm_lp_resume(struct device *dev)
{
return pinctrl_pm_select_default_state(dev);
}
static DEFINE_SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend,
stm32_pwm_lp_resume);
static const struct of_device_id stm32_pwm_lp_of_match[] = {
{ .compatible = "st,stm32-pwm-lp", },
{},
};
MODULE_DEVICE_TABLE(of, stm32_pwm_lp_of_match);
static struct platform_driver stm32_pwm_lp_driver = {
.probe = stm32_pwm_lp_probe,
.driver = {
.name = "stm32-pwm-lp",
.of_match_table = stm32_pwm_lp_of_match,
.pm = pm_ptr(&stm32_pwm_lp_pm_ops),
},
};
module_platform_driver(stm32_pwm_lp_driver);
MODULE_ALIAS("platform:stm32-pwm-lp");
MODULE_DESCRIPTION("STMicroelectronics STM32 PWM LP driver");
MODULE_LICENSE("GPL v2");