1
linux/include/acpi/actypes.h

1263 lines
37 KiB
C
Raw Normal View History

/******************************************************************************
*
* Name: actypes.h - Common data types for the entire ACPI subsystem
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef __ACTYPES_H__
#define __ACTYPES_H__
/*! [Begin] no source code translation (keep the typedefs) */
/*
* Data type ranges
* Note: These macros are designed to be compiler independent as well as
* working around problems that some 32-bit compilers have with 64-bit
* constants.
*/
#define ACPI_UINT8_MAX (UINT8) (~((UINT8) 0)) /* 0xFF */
#define ACPI_UINT16_MAX (UINT16)(~((UINT16) 0)) /* 0xFFFF */
#define ACPI_UINT32_MAX (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF */
#define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */
#define ACPI_ASCII_MAX 0x7F
#ifdef DEFINE_ALTERNATE_TYPES
/*
* Types used only in translated source, defined here to enable
* cross-platform compilation only.
*/
typedef int s32;
typedef unsigned char u8;
typedef unsigned short u16;
typedef unsigned int u32;
typedef COMPILER_DEPENDENT_UINT64 u64;
#endif
/*
* Data types - Fixed across all compilation models (16/32/64)
*
* BOOLEAN Logical Boolean.
* INT8 8-bit (1 byte) signed value
* UINT8 8-bit (1 byte) unsigned value
* INT16 16-bit (2 byte) signed value
* UINT16 16-bit (2 byte) unsigned value
* INT32 32-bit (4 byte) signed value
* UINT32 32-bit (4 byte) unsigned value
* INT64 64-bit (8 byte) signed value
* UINT64 64-bit (8 byte) unsigned value
* ACPI_NATIVE_UINT 32-bit on IA-32, 64-bit on x86_64/IA-64 unsigned value
*/
typedef unsigned long acpi_native_uint;
#ifndef ACPI_MACHINE_WIDTH
#error ACPI_MACHINE_WIDTH not defined
#endif
#if ACPI_MACHINE_WIDTH == 64
/*! [Begin] no source code translation (keep the typedefs) */
/*
* 64-bit type definitions
*/
typedef unsigned char UINT8;
typedef unsigned char BOOLEAN;
typedef unsigned short UINT16;
typedef int INT32;
typedef unsigned int UINT32;
typedef COMPILER_DEPENDENT_INT64 INT64;
typedef COMPILER_DEPENDENT_UINT64 UINT64;
/*! [End] no source code translation !*/
typedef u64 acpi_table_ptr;
typedef u64 acpi_io_address;
typedef u64 acpi_physical_address;
typedef u64 acpi_size;
#define ALIGNED_ADDRESS_BOUNDARY 0x00000008 /* No hardware alignment support in IA64 */
#define ACPI_USE_NATIVE_DIVIDE /* Native 64-bit integer support */
#define ACPI_MAX_PTR ACPI_UINT64_MAX
#define ACPI_SIZE_MAX ACPI_UINT64_MAX
/*
* In the case of the Itanium Processor Family (IPF), the hardware does not
* support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag
* to indicate that special precautions must be taken to avoid alignment faults.
* (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
*
* Note: Em64_t and other X86-64 processors do support misaligned transfers,
* so there is no need to define this flag.
*/
#if defined (__IA64__) || defined (__ia64__)
#define ACPI_MISALIGNMENT_NOT_SUPPORTED
#endif
#elif ACPI_MACHINE_WIDTH == 16
/*! [Begin] no source code translation (keep the typedefs as-is) */
/*
* 16-bit type definitions
*/
typedef unsigned char UINT8;
typedef unsigned char BOOLEAN;
typedef unsigned int UINT16;
typedef long INT32;
typedef int INT16;
typedef unsigned long UINT32;
struct {
UINT32 Lo;
UINT32 Hi;
};
/*! [End] no source code translation !*/
typedef u32 acpi_table_ptr;
typedef u32 acpi_io_address;
typedef char *acpi_physical_address;
typedef u16 acpi_size;
#define ALIGNED_ADDRESS_BOUNDARY 0x00000002
#define ACPI_USE_NATIVE_DIVIDE /* No 64-bit integers, ok to use native divide */
#define ACPI_MAX_PTR ACPI_UINT16_MAX
#define ACPI_SIZE_MAX ACPI_UINT16_MAX
/*
* (16-bit only) internal integers must be 32-bits, so
* 64-bit integers cannot be supported
*/
#define ACPI_NO_INTEGER64_SUPPORT
#elif ACPI_MACHINE_WIDTH == 32
/*! [Begin] no source code translation (keep the typedefs) */
/*
* 32-bit type definitions (default)
*/
typedef unsigned char UINT8;
typedef unsigned char BOOLEAN;
typedef unsigned short UINT16;
typedef int INT32;
typedef unsigned int UINT32;
typedef COMPILER_DEPENDENT_INT64 INT64;
typedef COMPILER_DEPENDENT_UINT64 UINT64;
/*! [End] no source code translation !*/
typedef u64 acpi_table_ptr;
typedef u32 acpi_io_address;
typedef u64 acpi_physical_address;
typedef u32 acpi_size;
#define ALIGNED_ADDRESS_BOUNDARY 0x00000004
#define ACPI_MAX_PTR ACPI_UINT32_MAX
#define ACPI_SIZE_MAX ACPI_UINT32_MAX
#else
#error unknown ACPI_MACHINE_WIDTH
#endif
/*
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-07 21:00:00 -07:00
* This type is used for bitfields in ACPI tables. The only type that is
* even remotely portable is u8. Anything else is not portable, so
* do not add any more bitfield types.
*/
typedef u8 UINT8_BIT;
typedef acpi_native_uint ACPI_PTRDIFF;
/*
* Pointer overlays to avoid lots of typecasting for
* code that accepts both physical and logical pointers.
*/
union acpi_pointers {
acpi_physical_address physical;
void *logical;
acpi_table_ptr value;
};
struct acpi_pointer {
u32 pointer_type;
union acpi_pointers pointer;
};
/* pointer_types for above */
#define ACPI_PHYSICAL_POINTER 0x01
#define ACPI_LOGICAL_POINTER 0x02
/* Processor mode */
#define ACPI_PHYSICAL_ADDRESSING 0x04
#define ACPI_LOGICAL_ADDRESSING 0x08
#define ACPI_MEMORY_MODE 0x0C
#define ACPI_PHYSMODE_PHYSPTR ACPI_PHYSICAL_ADDRESSING | ACPI_PHYSICAL_POINTER
#define ACPI_LOGMODE_PHYSPTR ACPI_LOGICAL_ADDRESSING | ACPI_PHYSICAL_POINTER
#define ACPI_LOGMODE_LOGPTR ACPI_LOGICAL_ADDRESSING | ACPI_LOGICAL_POINTER
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-07 21:00:00 -07:00
/*
* If acpi_cache_t was not defined in the OS-dependent header,
* define it now. This is typically the case where the local cache
* manager implementation is to be used (ACPI_USE_LOCAL_CACHE)
*/
#ifndef acpi_cache_t
#define acpi_cache_t struct acpi_memory_list
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 21:00:00 -07:00
#endif
/*
* Useful defines
*/
#ifdef FALSE
#undef FALSE
#endif
#define FALSE (1 == 0)
#ifdef TRUE
#undef TRUE
#endif
#define TRUE (1 == 1)
#ifndef NULL
#define NULL (void *) 0
#endif
/*
* Local datatypes
*/
typedef u32 acpi_status; /* All ACPI Exceptions */
typedef u32 acpi_name; /* 4-byte ACPI name */
typedef char *acpi_string; /* Null terminated ASCII string */
typedef void *acpi_handle; /* Actually a ptr to an Node */
struct uint64_struct {
u32 lo;
u32 hi;
};
union uint64_overlay {
u64 full;
struct uint64_struct part;
};
struct uint32_struct {
u32 lo;
u32 hi;
};
/*
* Acpi integer width. In ACPI version 1, integers are
* 32 bits. In ACPI version 2, integers are 64 bits.
* Note that this pertains to the ACPI integer type only, not
* other integers used in the implementation of the ACPI CA
* subsystem.
*/
#ifdef ACPI_NO_INTEGER64_SUPPORT
/* 32-bit integers only, no 64-bit support */
typedef u32 acpi_integer;
#define ACPI_INTEGER_MAX ACPI_UINT32_MAX
#define ACPI_INTEGER_BIT_SIZE 32
#define ACPI_MAX_DECIMAL_DIGITS 10 /* 2^32 = 4,294,967,296 */
#define ACPI_USE_NATIVE_DIVIDE /* Use compiler native 32-bit divide */
#else
/* 64-bit integers */
typedef u64 acpi_integer;
#define ACPI_INTEGER_MAX ACPI_UINT64_MAX
#define ACPI_INTEGER_BIT_SIZE 64
#define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */
#if ACPI_MACHINE_WIDTH == 64
#define ACPI_USE_NATIVE_DIVIDE /* Use compiler native 64-bit divide */
#endif
#endif
#define ACPI_MAX64_DECIMAL_DIGITS 20
#define ACPI_MAX32_DECIMAL_DIGITS 10
#define ACPI_MAX16_DECIMAL_DIGITS 5
#define ACPI_MAX8_DECIMAL_DIGITS 3
/*
* Constants with special meanings
*/
[ACPI] ACPICA 20051117 Fixed a problem in the AML parser where the method thread count could be decremented below zero if any errors occurred during the method parse phase. This should eliminate AE_AML_METHOD_LIMIT exceptions seen on some machines. This also fixed a related regression with the mechanism that detects and corrects methods that cannot properly handle reentrancy (related to the deployment of the new OwnerId mechanism.) Eliminated the pre-parsing of control methods (to detect errors) during table load. Related to the problem above, this was causing unwind issues if any errors occurred during the parse, and it seemed to be overkill. A table load should not be aborted if there are problems with any single control method, thus rendering this feature rather pointless. Fixed a problem with the new table-driven resource manager where an internal buffer overflow could occur for small resource templates. Implemented a new external interface, acpi_get_vendor_resource() This interface will find and return a vendor-defined resource descriptor within a _CRS or _PRS method via an ACPI 3.0 UUID match. (from Bjorn Helgaas) Removed the length limit (200) on string objects as per the upcoming ACPI 3.0A specification. This affects the following areas of the interpreter: 1) any implicit conversion of a Buffer to a String, 2) a String object result of the ASL Concatentate operator, 3) the String object result of the ASL ToString operator. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-11-17 11:07:00 -07:00
#define ACPI_ROOT_OBJECT ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR)
/*
* Initialization sequence
*/
#define ACPI_FULL_INITIALIZATION 0x00
#define ACPI_NO_ADDRESS_SPACE_INIT 0x01
#define ACPI_NO_HARDWARE_INIT 0x02
#define ACPI_NO_EVENT_INIT 0x04
#define ACPI_NO_HANDLER_INIT 0x08
#define ACPI_NO_ACPI_ENABLE 0x10
#define ACPI_NO_DEVICE_INIT 0x20
#define ACPI_NO_OBJECT_INIT 0x40
/*
* Initialization state
*/
#define ACPI_INITIALIZED_OK 0x01
/*
* Power state values
*/
#define ACPI_STATE_UNKNOWN (u8) 0xFF
#define ACPI_STATE_S0 (u8) 0
#define ACPI_STATE_S1 (u8) 1
#define ACPI_STATE_S2 (u8) 2
#define ACPI_STATE_S3 (u8) 3
#define ACPI_STATE_S4 (u8) 4
#define ACPI_STATE_S5 (u8) 5
#define ACPI_S_STATES_MAX ACPI_STATE_S5
#define ACPI_S_STATE_COUNT 6
#define ACPI_STATE_D0 (u8) 0
#define ACPI_STATE_D1 (u8) 1
#define ACPI_STATE_D2 (u8) 2
#define ACPI_STATE_D3 (u8) 3
#define ACPI_D_STATES_MAX ACPI_STATE_D3
#define ACPI_D_STATE_COUNT 4
#define ACPI_STATE_C0 (u8) 0
#define ACPI_STATE_C1 (u8) 1
#define ACPI_STATE_C2 (u8) 2
#define ACPI_STATE_C3 (u8) 3
#define ACPI_C_STATES_MAX ACPI_STATE_C3
#define ACPI_C_STATE_COUNT 4
/*
* Sleep type invalid value
*/
#define ACPI_SLEEP_TYPE_MAX 0x7
#define ACPI_SLEEP_TYPE_INVALID 0xFF
/*
* Standard notify values
*/
#define ACPI_NOTIFY_BUS_CHECK (u8) 0
#define ACPI_NOTIFY_DEVICE_CHECK (u8) 1
#define ACPI_NOTIFY_DEVICE_WAKE (u8) 2
#define ACPI_NOTIFY_EJECT_REQUEST (u8) 3
#define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 4
#define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 5
#define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 6
#define ACPI_NOTIFY_POWER_FAULT (u8) 7
/*
* Table types. These values are passed to the table related APIs
*/
typedef u32 acpi_table_type;
#define ACPI_TABLE_RSDP (acpi_table_type) 0
#define ACPI_TABLE_DSDT (acpi_table_type) 1
#define ACPI_TABLE_FADT (acpi_table_type) 2
#define ACPI_TABLE_FACS (acpi_table_type) 3
#define ACPI_TABLE_PSDT (acpi_table_type) 4
#define ACPI_TABLE_SSDT (acpi_table_type) 5
#define ACPI_TABLE_XSDT (acpi_table_type) 6
#define ACPI_TABLE_MAX 6
#define NUM_ACPI_TABLE_TYPES (ACPI_TABLE_MAX+1)
/*
* Types associated with ACPI names and objects. The first group of
* values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
* of the ACPI object_type() operator (See the ACPI Spec). Therefore,
* only add to the first group if the spec changes.
*
* NOTE: Types must be kept in sync with the global acpi_ns_properties
* and acpi_ns_type_names arrays.
*/
typedef u32 acpi_object_type;
#define ACPI_TYPE_ANY 0x00
#define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */
#define ACPI_TYPE_STRING 0x02
#define ACPI_TYPE_BUFFER 0x03
#define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */
#define ACPI_TYPE_FIELD_UNIT 0x05
#define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */
#define ACPI_TYPE_EVENT 0x07
#define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */
#define ACPI_TYPE_MUTEX 0x09
#define ACPI_TYPE_REGION 0x0A
#define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */
#define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */
#define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */
#define ACPI_TYPE_BUFFER_FIELD 0x0E
#define ACPI_TYPE_DDB_HANDLE 0x0F
#define ACPI_TYPE_DEBUG_OBJECT 0x10
#define ACPI_TYPE_EXTERNAL_MAX 0x10
/*
* These are object types that do not map directly to the ACPI
* object_type() operator. They are used for various internal purposes only.
* If new predefined ACPI_TYPEs are added (via the ACPI specification), these
* internal types must move upwards. (There is code that depends on these
* values being contiguous with the external types above.)
*/
#define ACPI_TYPE_LOCAL_REGION_FIELD 0x11
#define ACPI_TYPE_LOCAL_BANK_FIELD 0x12
#define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13
#define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */
#define ACPI_TYPE_LOCAL_ALIAS 0x15
#define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16
#define ACPI_TYPE_LOCAL_NOTIFY 0x17
#define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
#define ACPI_TYPE_LOCAL_RESOURCE 0x19
#define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A
#define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */
#define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */
/*
* These are special object types that never appear in
* a Namespace node, only in an union acpi_operand_object
*/
#define ACPI_TYPE_LOCAL_EXTRA 0x1C
#define ACPI_TYPE_LOCAL_DATA 0x1D
#define ACPI_TYPE_LOCAL_MAX 0x1D
/* All types above here are invalid */
#define ACPI_TYPE_INVALID 0x1E
#define ACPI_TYPE_NOT_FOUND 0xFF
/*
* Bitmapped ACPI types. Used internally only
*/
#define ACPI_BTYPE_ANY 0x00000000
#define ACPI_BTYPE_INTEGER 0x00000001
#define ACPI_BTYPE_STRING 0x00000002
#define ACPI_BTYPE_BUFFER 0x00000004
#define ACPI_BTYPE_PACKAGE 0x00000008
#define ACPI_BTYPE_FIELD_UNIT 0x00000010
#define ACPI_BTYPE_DEVICE 0x00000020
#define ACPI_BTYPE_EVENT 0x00000040
#define ACPI_BTYPE_METHOD 0x00000080
#define ACPI_BTYPE_MUTEX 0x00000100
#define ACPI_BTYPE_REGION 0x00000200
#define ACPI_BTYPE_POWER 0x00000400
#define ACPI_BTYPE_PROCESSOR 0x00000800
#define ACPI_BTYPE_THERMAL 0x00001000
#define ACPI_BTYPE_BUFFER_FIELD 0x00002000
#define ACPI_BTYPE_DDB_HANDLE 0x00004000
#define ACPI_BTYPE_DEBUG_OBJECT 0x00008000
#define ACPI_BTYPE_REFERENCE 0x00010000
#define ACPI_BTYPE_RESOURCE 0x00020000
#define ACPI_BTYPE_COMPUTE_DATA (ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_BUFFER)
#define ACPI_BTYPE_DATA (ACPI_BTYPE_COMPUTE_DATA | ACPI_BTYPE_PACKAGE)
#define ACPI_BTYPE_DATA_REFERENCE (ACPI_BTYPE_DATA | ACPI_BTYPE_REFERENCE | ACPI_BTYPE_DDB_HANDLE)
#define ACPI_BTYPE_DEVICE_OBJECTS (ACPI_BTYPE_DEVICE | ACPI_BTYPE_THERMAL | ACPI_BTYPE_PROCESSOR)
#define ACPI_BTYPE_OBJECTS_AND_REFS 0x0001FFFF /* ARG or LOCAL */
#define ACPI_BTYPE_ALL_OBJECTS 0x0000FFFF
/*
* All I/O
*/
#define ACPI_READ 0
#define ACPI_WRITE 1
#define ACPI_IO_MASK 1
/*
* Event Types: Fixed & General Purpose
*/
typedef u32 acpi_event_type;
/*
* Fixed events
*/
#define ACPI_EVENT_PMTIMER 0
#define ACPI_EVENT_GLOBAL 1
#define ACPI_EVENT_POWER_BUTTON 2
#define ACPI_EVENT_SLEEP_BUTTON 3
#define ACPI_EVENT_RTC 4
#define ACPI_EVENT_MAX 4
#define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1
/*
* Event Status - Per event
* -------------
* The encoding of acpi_event_status is illustrated below.
* Note that a set bit (1) indicates the property is TRUE
* (e.g. if bit 0 is set then the event is enabled).
* +-------------+-+-+-+
* | Bits 31:3 |2|1|0|
* +-------------+-+-+-+
* | | | |
* | | | +- Enabled?
* | | +--- Enabled for wake?
* | +----- Set?
* +----------- <Reserved>
*/
typedef u32 acpi_event_status;
#define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00
#define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01
#define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02
#define ACPI_EVENT_FLAG_SET (acpi_event_status) 0x04
/*
* General Purpose Events (GPE)
*/
#define ACPI_GPE_INVALID 0xFF
#define ACPI_GPE_MAX 0xFF
#define ACPI_NUM_GPE 256
#define ACPI_GPE_ENABLE 0
#define ACPI_GPE_DISABLE 1
/*
* GPE info flags - Per GPE
* +-+-+-+---+---+-+
* |7|6|5|4:3|2:1|0|
* +-+-+-+---+---+-+
* | | | | | |
* | | | | | +--- Interrupt type: Edge or Level Triggered
* | | | | +--- Type: Wake-only, Runtime-only, or wake/runtime
* | | | +--- Type of dispatch -- to method, handler, or none
* | | +--- Enabled for runtime?
* | +--- Enabled for wake?
* +--- System state when GPE ocurred (running/waking)
*/
#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01
#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x01
#define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00
#define ACPI_GPE_TYPE_MASK (u8) 0x06
#define ACPI_GPE_TYPE_WAKE_RUN (u8) 0x06
#define ACPI_GPE_TYPE_WAKE (u8) 0x02
#define ACPI_GPE_TYPE_RUNTIME (u8) 0x04 /* Default */
#define ACPI_GPE_DISPATCH_MASK (u8) 0x18
#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x08
#define ACPI_GPE_DISPATCH_METHOD (u8) 0x10
#define ACPI_GPE_DISPATCH_NOT_USED (u8) 0x00 /* Default */
#define ACPI_GPE_RUN_ENABLE_MASK (u8) 0x20
#define ACPI_GPE_RUN_ENABLED (u8) 0x20
#define ACPI_GPE_RUN_DISABLED (u8) 0x00 /* Default */
#define ACPI_GPE_WAKE_ENABLE_MASK (u8) 0x40
#define ACPI_GPE_WAKE_ENABLED (u8) 0x40
#define ACPI_GPE_WAKE_DISABLED (u8) 0x00 /* Default */
#define ACPI_GPE_ENABLE_MASK (u8) 0x60 /* Both run/wake */
#define ACPI_GPE_SYSTEM_MASK (u8) 0x80
#define ACPI_GPE_SYSTEM_RUNNING (u8) 0x80
#define ACPI_GPE_SYSTEM_WAKING (u8) 0x00
/*
* Flags for GPE and Lock interfaces
*/
#define ACPI_EVENT_WAKE_ENABLE 0x2 /* acpi_gpe_enable */
#define ACPI_EVENT_WAKE_DISABLE 0x2 /* acpi_gpe_disable */
#define ACPI_NOT_ISR 0x1
#define ACPI_ISR 0x0
/* Notify types */
#define ACPI_SYSTEM_NOTIFY 0x1
#define ACPI_DEVICE_NOTIFY 0x2
#define ACPI_ALL_NOTIFY 0x3
#define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3
#define ACPI_MAX_SYS_NOTIFY 0x7f
/* Address Space (Operation Region) Types */
typedef u8 acpi_adr_space_type;
#define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0
#define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1
#define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2
#define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3
#define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4
#define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5
#define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6
#define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 7
#define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 127
/*
* bit_register IDs
* These are bitfields defined within the full ACPI registers
*/
#define ACPI_BITREG_TIMER_STATUS 0x00
#define ACPI_BITREG_BUS_MASTER_STATUS 0x01
#define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02
#define ACPI_BITREG_POWER_BUTTON_STATUS 0x03
#define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04
#define ACPI_BITREG_RT_CLOCK_STATUS 0x05
#define ACPI_BITREG_WAKE_STATUS 0x06
#define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07
#define ACPI_BITREG_TIMER_ENABLE 0x08
#define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09
#define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A
#define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B
#define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C
#define ACPI_BITREG_WAKE_ENABLE 0x0D
#define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0E
#define ACPI_BITREG_SCI_ENABLE 0x0F
#define ACPI_BITREG_BUS_MASTER_RLD 0x10
#define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x11
#define ACPI_BITREG_SLEEP_TYPE_A 0x12
#define ACPI_BITREG_SLEEP_TYPE_B 0x13
#define ACPI_BITREG_SLEEP_ENABLE 0x14
#define ACPI_BITREG_ARB_DISABLE 0x15
#define ACPI_BITREG_MAX 0x15
#define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1
/*
* External ACPI object definition
*/
union acpi_object {
acpi_object_type type; /* See definition of acpi_ns_type for values */
struct {
acpi_object_type type;
acpi_integer value; /* The actual number */
} integer;
struct {
acpi_object_type type;
u32 length; /* # of bytes in string, excluding trailing null */
char *pointer; /* points to the string value */
} string;
struct {
acpi_object_type type;
u32 length; /* # of bytes in buffer */
u8 *pointer; /* points to the buffer */
} buffer;
struct {
acpi_object_type type;
u32 fill1;
acpi_handle handle; /* object reference */
} reference;
struct {
acpi_object_type type;
u32 count; /* # of elements in package */
union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */
} package;
struct {
acpi_object_type type;
u32 proc_id;
acpi_io_address pblk_address;
u32 pblk_length;
} processor;
struct {
acpi_object_type type;
u32 system_level;
u32 resource_order;
} power_resource;
};
/*
* List of objects, used as a parameter list for control method evaluation
*/
struct acpi_object_list {
u32 count;
union acpi_object *pointer;
};
/*
* Miscellaneous common Data Structures used by the interfaces
*/
#define ACPI_NO_BUFFER 0
#define ACPI_ALLOCATE_BUFFER (acpi_size) (-1)
#define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2)
struct acpi_buffer {
acpi_size length; /* Length in bytes of the buffer */
void *pointer; /* pointer to buffer */
};
/*
* name_type for acpi_get_name
*/
#define ACPI_FULL_PATHNAME 0
#define ACPI_SINGLE_NAME 1
#define ACPI_NAME_TYPE_MAX 1
/*
* Structure and flags for acpi_get_system_info
*/
#define ACPI_SYS_MODE_UNKNOWN 0x0000
#define ACPI_SYS_MODE_ACPI 0x0001
#define ACPI_SYS_MODE_LEGACY 0x0002
#define ACPI_SYS_MODES_MASK 0x0003
/*
* ACPI Table Info. One per ACPI table _type_
*/
struct acpi_table_info {
u32 count;
};
/*
* System info returned by acpi_get_system_info()
*/
struct acpi_system_info {
u32 acpi_ca_version;
u32 flags;
u32 timer_resolution;
u32 reserved1;
u32 reserved2;
u32 debug_level;
u32 debug_layer;
u32 num_table_types;
struct acpi_table_info table_info[NUM_ACPI_TABLE_TYPES];
};
/*
* Types specific to the OS service interfaces
*/
typedef u32(ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
typedef void
(ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
/*
* Various handlers and callback procedures
*/
typedef u32(*acpi_event_handler) (void *context);
typedef
void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context);
typedef
void (*acpi_object_handler) (acpi_handle object, u32 function, void *data);
typedef acpi_status(*acpi_init_handler) (acpi_handle object, u32 function);
#define ACPI_INIT_DEVICE_INI 1
typedef
acpi_status(*acpi_exception_handler) (acpi_status aml_status,
acpi_name name,
u16 opcode,
u32 aml_offset, void *context);
/* Address Spaces (For Operation Regions) */
typedef
acpi_status(*acpi_adr_space_handler) (u32 function,
acpi_physical_address address,
u32 bit_width,
acpi_integer * value,
void *handler_context,
void *region_context);
#define ACPI_DEFAULT_HANDLER NULL
typedef
acpi_status(*acpi_adr_space_setup) (acpi_handle region_handle,
u32 function,
void *handler_context,
void **region_context);
#define ACPI_REGION_ACTIVATE 0
#define ACPI_REGION_DEACTIVATE 1
typedef
acpi_status(*acpi_walk_callback) (acpi_handle obj_handle,
u32 nesting_level,
void *context, void **return_value);
/* Interrupt handler return values */
#define ACPI_INTERRUPT_NOT_HANDLED 0x00
#define ACPI_INTERRUPT_HANDLED 0x01
/* Common string version of device HIDs and UIDs */
struct acpi_device_id {
char value[ACPI_DEVICE_ID_LENGTH];
};
/* Common string version of device CIDs */
struct acpi_compatible_id {
char value[ACPI_MAX_CID_LENGTH];
};
struct acpi_compatible_id_list {
u32 count;
u32 size;
struct acpi_compatible_id id[1];
};
/* Structure and flags for acpi_get_object_info */
#define ACPI_VALID_STA 0x0001
#define ACPI_VALID_ADR 0x0002
#define ACPI_VALID_HID 0x0004
#define ACPI_VALID_UID 0x0008
#define ACPI_VALID_CID 0x0010
#define ACPI_VALID_SXDS 0x0020
#define ACPI_COMMON_OBJ_INFO \
acpi_object_type type; /* ACPI object type */ \
acpi_name name /* ACPI object Name */
struct acpi_obj_info_header {
ACPI_COMMON_OBJ_INFO;
};
/* Structure returned from Get Object Info */
struct acpi_device_info {
ACPI_COMMON_OBJ_INFO;
u32 valid; /* Indicates which fields below are valid */
u32 current_status; /* _STA value */
acpi_integer address; /* _ADR value if any */
struct acpi_device_id hardware_id; /* _HID value if any */
struct acpi_device_id unique_id; /* _UID value if any */
u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
struct acpi_compatible_id_list compatibility_id; /* List of _CIDs if any */
};
/* Context structs for address space handlers */
struct acpi_pci_id {
u16 segment;
u16 bus;
u16 device;
u16 function;
};
struct acpi_mem_space_context {
u32 length;
acpi_physical_address address;
acpi_physical_address mapped_physical_address;
u8 *mapped_logical_address;
acpi_size mapped_length;
};
/*
* Definitions for Resource Attributes
*/
typedef u16 acpi_rs_length; /* Resource Length field is fixed at 16 bits */
typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (length+3) = (64_k-1)+3 */
/*
* Memory Attributes
*/
#define ACPI_READ_ONLY_MEMORY (u8) 0x00
#define ACPI_READ_WRITE_MEMORY (u8) 0x01
#define ACPI_NON_CACHEABLE_MEMORY (u8) 0x00
#define ACPI_CACHABLE_MEMORY (u8) 0x01
#define ACPI_WRITE_COMBINING_MEMORY (u8) 0x02
#define ACPI_PREFETCHABLE_MEMORY (u8) 0x03
/*
* IO Attributes
* The ISA Io ranges are: n000-n0_ffh, n400-n4_ffh, n800-n8_ffh, n_c00-n_cFFh.
* The non-ISA Io ranges are: n100-n3_ffh, n500-n7_ffh, n900-n_bFfh, n_cd0-n_fFFh.
*/
#define ACPI_NON_ISA_ONLY_RANGES (u8) 0x01
#define ACPI_ISA_ONLY_RANGES (u8) 0x02
#define ACPI_ENTIRE_RANGE (ACPI_NON_ISA_ONLY_RANGES | ACPI_ISA_ONLY_RANGES)
#define ACPI_SPARSE_TRANSLATION (u8) 0x03
/*
* IO Port Descriptor Decode
*/
#define ACPI_DECODE_10 (u8) 0x00 /* 10-bit IO address decode */
#define ACPI_DECODE_16 (u8) 0x01 /* 16-bit IO address decode */
/*
* IRQ Attributes
*/
#define ACPI_LEVEL_SENSITIVE (u8) 0x00
#define ACPI_EDGE_SENSITIVE (u8) 0x01
#define ACPI_ACTIVE_HIGH (u8) 0x00
#define ACPI_ACTIVE_LOW (u8) 0x01
#define ACPI_EXCLUSIVE (u8) 0x00
#define ACPI_SHARED (u8) 0x01
/*
* DMA Attributes
*/
#define ACPI_COMPATIBILITY (u8) 0x00
#define ACPI_TYPE_A (u8) 0x01
#define ACPI_TYPE_B (u8) 0x02
#define ACPI_TYPE_F (u8) 0x03
#define ACPI_NOT_BUS_MASTER (u8) 0x00
#define ACPI_BUS_MASTER (u8) 0x01
#define ACPI_TRANSFER_8 (u8) 0x00
#define ACPI_TRANSFER_8_16 (u8) 0x01
#define ACPI_TRANSFER_16 (u8) 0x02
/*
* Start Dependent Functions Priority definitions
*/
#define ACPI_GOOD_CONFIGURATION (u8) 0x00
#define ACPI_ACCEPTABLE_CONFIGURATION (u8) 0x01
#define ACPI_SUB_OPTIMAL_CONFIGURATION (u8) 0x02
/*
* 16, 32 and 64-bit Address Descriptor resource types
*/
#define ACPI_MEMORY_RANGE (u8) 0x00
#define ACPI_IO_RANGE (u8) 0x01
#define ACPI_BUS_NUMBER_RANGE (u8) 0x02
#define ACPI_ADDRESS_NOT_FIXED (u8) 0x00
#define ACPI_ADDRESS_FIXED (u8) 0x01
#define ACPI_POS_DECODE (u8) 0x00
#define ACPI_SUB_DECODE (u8) 0x01
#define ACPI_PRODUCER (u8) 0x00
#define ACPI_CONSUMER (u8) 0x01
/*
* If possible, pack the following structures to byte alignment
*/
#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
#pragma pack(1)
#endif
[ACPI] ACPICA 20051117 Fixed a problem in the AML parser where the method thread count could be decremented below zero if any errors occurred during the method parse phase. This should eliminate AE_AML_METHOD_LIMIT exceptions seen on some machines. This also fixed a related regression with the mechanism that detects and corrects methods that cannot properly handle reentrancy (related to the deployment of the new OwnerId mechanism.) Eliminated the pre-parsing of control methods (to detect errors) during table load. Related to the problem above, this was causing unwind issues if any errors occurred during the parse, and it seemed to be overkill. A table load should not be aborted if there are problems with any single control method, thus rendering this feature rather pointless. Fixed a problem with the new table-driven resource manager where an internal buffer overflow could occur for small resource templates. Implemented a new external interface, acpi_get_vendor_resource() This interface will find and return a vendor-defined resource descriptor within a _CRS or _PRS method via an ACPI 3.0 UUID match. (from Bjorn Helgaas) Removed the length limit (200) on string objects as per the upcoming ACPI 3.0A specification. This affects the following areas of the interpreter: 1) any implicit conversion of a Buffer to a String, 2) a String object result of the ASL Concatentate operator, 3) the String object result of the ASL ToString operator. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-11-17 11:07:00 -07:00
/* UUID data structures for use in vendor-defined resource descriptors */
struct acpi_uuid {
u8 data[ACPI_UUID_LENGTH];
};
struct acpi_vendor_uuid {
u8 subtype;
u8 data[ACPI_UUID_LENGTH];
};
/*
* Structures used to describe device resources
*/
struct acpi_resource_irq {
u8 triggering;
u8 polarity;
u8 sharable;
u8 interrupt_count;
u8 interrupts[1];
};
struct acpi_resource_dma {
u8 type;
u8 bus_master;
u8 transfer;
u8 channel_count;
u8 channels[1];
};
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
struct acpi_resource_start_dependent {
u8 compatibility_priority;
u8 performance_robustness;
};
/*
* END_DEPENDENT_FUNCTIONS_RESOURCE struct is not
* needed because it has no fields
*/
struct acpi_resource_io {
u8 io_decode;
u8 alignment;
u8 address_length;
u16 minimum;
u16 maximum;
};
struct acpi_resource_fixed_io {
u16 address;
u8 address_length;
};
struct acpi_resource_vendor {
u16 byte_length;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
u8 byte_data[1];
};
[ACPI] ACPICA 20051117 Fixed a problem in the AML parser where the method thread count could be decremented below zero if any errors occurred during the method parse phase. This should eliminate AE_AML_METHOD_LIMIT exceptions seen on some machines. This also fixed a related regression with the mechanism that detects and corrects methods that cannot properly handle reentrancy (related to the deployment of the new OwnerId mechanism.) Eliminated the pre-parsing of control methods (to detect errors) during table load. Related to the problem above, this was causing unwind issues if any errors occurred during the parse, and it seemed to be overkill. A table load should not be aborted if there are problems with any single control method, thus rendering this feature rather pointless. Fixed a problem with the new table-driven resource manager where an internal buffer overflow could occur for small resource templates. Implemented a new external interface, acpi_get_vendor_resource() This interface will find and return a vendor-defined resource descriptor within a _CRS or _PRS method via an ACPI 3.0 UUID match. (from Bjorn Helgaas) Removed the length limit (200) on string objects as per the upcoming ACPI 3.0A specification. This affects the following areas of the interpreter: 1) any implicit conversion of a Buffer to a String, 2) a String object result of the ASL Concatentate operator, 3) the String object result of the ASL ToString operator. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-11-17 11:07:00 -07:00
/* Vendor resource with UUID info (introduced in ACPI 3.0) */
struct acpi_resource_vendor_typed {
u16 byte_length;
u8 uuid_subtype;
u8 uuid[ACPI_UUID_LENGTH];
u8 byte_data[1];
};
struct acpi_resource_end_tag {
u8 checksum;
};
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
struct acpi_resource_memory24 {
u8 write_protect;
u16 minimum;
u16 maximum;
u16 alignment;
u16 address_length;
};
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
struct acpi_resource_memory32 {
u8 write_protect;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
u32 minimum;
u32 maximum;
u32 alignment;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
u32 address_length;
};
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
struct acpi_resource_fixed_memory32 {
u8 write_protect;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
u32 address;
u32 address_length;
};
struct acpi_memory_attribute {
u8 write_protect;
u8 caching;
u8 range_type;
u8 translation;
};
struct acpi_io_attribute {
u8 range_type;
u8 translation;
u8 translation_type;
u8 reserved1;
};
union acpi_resource_attribute {
struct acpi_memory_attribute mem;
struct acpi_io_attribute io;
/* Used for the *word_space macros */
u8 type_specific;
};
struct acpi_resource_source {
u8 index;
u16 string_length;
char *string_ptr;
};
/* Fields common to all address descriptors, 16/32/64 bit */
#define ACPI_RESOURCE_ADDRESS_COMMON \
u8 resource_type; \
u8 producer_consumer; \
u8 decode; \
u8 min_address_fixed; \
u8 max_address_fixed; \
union acpi_resource_attribute info;
struct acpi_resource_address {
ACPI_RESOURCE_ADDRESS_COMMON};
struct acpi_resource_address16 {
ACPI_RESOURCE_ADDRESS_COMMON u16 granularity;
u16 minimum;
u16 maximum;
u16 translation_offset;
u16 address_length;
struct acpi_resource_source resource_source;
};
struct acpi_resource_address32 {
ACPI_RESOURCE_ADDRESS_COMMON u32 granularity;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
u32 minimum;
u32 maximum;
u32 translation_offset;
u32 address_length;
struct acpi_resource_source resource_source;
};
struct acpi_resource_address64 {
ACPI_RESOURCE_ADDRESS_COMMON u64 granularity;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
u64 minimum;
u64 maximum;
u64 translation_offset;
u64 address_length;
struct acpi_resource_source resource_source;
};
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
struct acpi_resource_extended_address64 {
ACPI_RESOURCE_ADDRESS_COMMON u8 revision_iD;
u64 granularity;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
u64 minimum;
u64 maximum;
u64 translation_offset;
u64 address_length;
u64 type_specific;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
};
struct acpi_resource_extended_irq {
u8 producer_consumer;
u8 triggering;
u8 polarity;
u8 sharable;
u8 interrupt_count;
struct acpi_resource_source resource_source;
u32 interrupts[1];
};
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
struct acpi_resource_generic_register {
u8 space_id;
u8 bit_width;
u8 bit_offset;
u8 access_size;
u64 address;
};
/* ACPI_RESOURCE_TYPEs */
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
#define ACPI_RESOURCE_TYPE_IRQ 0
#define ACPI_RESOURCE_TYPE_DMA 1
#define ACPI_RESOURCE_TYPE_START_DEPENDENT 2
#define ACPI_RESOURCE_TYPE_END_DEPENDENT 3
#define ACPI_RESOURCE_TYPE_IO 4
#define ACPI_RESOURCE_TYPE_FIXED_IO 5
#define ACPI_RESOURCE_TYPE_VENDOR 6
#define ACPI_RESOURCE_TYPE_END_TAG 7
#define ACPI_RESOURCE_TYPE_MEMORY24 8
#define ACPI_RESOURCE_TYPE_MEMORY32 9
#define ACPI_RESOURCE_TYPE_FIXED_MEMORY32 10
#define ACPI_RESOURCE_TYPE_ADDRESS16 11
#define ACPI_RESOURCE_TYPE_ADDRESS32 12
#define ACPI_RESOURCE_TYPE_ADDRESS64 13
#define ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 14 /* ACPI 3.0 */
#define ACPI_RESOURCE_TYPE_EXTENDED_IRQ 15
#define ACPI_RESOURCE_TYPE_GENERIC_REGISTER 16
#define ACPI_RESOURCE_TYPE_MAX 16
union acpi_resource_data {
struct acpi_resource_irq irq;
struct acpi_resource_dma dma;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
struct acpi_resource_start_dependent start_dpf;
struct acpi_resource_io io;
struct acpi_resource_fixed_io fixed_io;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
struct acpi_resource_vendor vendor;
[ACPI] ACPICA 20051117 Fixed a problem in the AML parser where the method thread count could be decremented below zero if any errors occurred during the method parse phase. This should eliminate AE_AML_METHOD_LIMIT exceptions seen on some machines. This also fixed a related regression with the mechanism that detects and corrects methods that cannot properly handle reentrancy (related to the deployment of the new OwnerId mechanism.) Eliminated the pre-parsing of control methods (to detect errors) during table load. Related to the problem above, this was causing unwind issues if any errors occurred during the parse, and it seemed to be overkill. A table load should not be aborted if there are problems with any single control method, thus rendering this feature rather pointless. Fixed a problem with the new table-driven resource manager where an internal buffer overflow could occur for small resource templates. Implemented a new external interface, acpi_get_vendor_resource() This interface will find and return a vendor-defined resource descriptor within a _CRS or _PRS method via an ACPI 3.0 UUID match. (from Bjorn Helgaas) Removed the length limit (200) on string objects as per the upcoming ACPI 3.0A specification. This affects the following areas of the interpreter: 1) any implicit conversion of a Buffer to a String, 2) a String object result of the ASL Concatentate operator, 3) the String object result of the ASL ToString operator. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-11-17 11:07:00 -07:00
struct acpi_resource_vendor_typed vendor_typed;
struct acpi_resource_end_tag end_tag;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
struct acpi_resource_memory24 memory24;
struct acpi_resource_memory32 memory32;
struct acpi_resource_fixed_memory32 fixed_memory32;
struct acpi_resource_address16 address16;
struct acpi_resource_address32 address32;
struct acpi_resource_address64 address64;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
struct acpi_resource_extended_address64 ext_address64;
struct acpi_resource_extended_irq extended_irq;
struct acpi_resource_generic_register generic_reg;
/* Common fields */
struct acpi_resource_address address; /* Common 16/32/64 address fields */
};
struct acpi_resource {
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 16:03:00 -07:00
u32 type;
u32 length;
union acpi_resource_data data;
};
/* restore default alignment */
#pragma pack()
#define ACPI_RS_SIZE_MIN 12
#define ACPI_RS_SIZE_NO_DATA 8 /* Id + Length fields */
#define ACPI_RS_SIZE(type) (u32) (ACPI_RS_SIZE_NO_DATA + sizeof (type))
#define ACPI_NEXT_RESOURCE(res) (struct acpi_resource *)((u8 *) res + res->length)
#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
#define ACPI_ALIGN_RESOURCE_SIZE(length) (length)
#else
#define ACPI_ALIGN_RESOURCE_SIZE(length) ACPI_ROUND_UP_TO_NATIVE_WORD(length)
#endif
/*
* END: of definitions for Resource Attributes
*/
struct acpi_pci_routing_table {
u32 length;
u32 pin;
acpi_integer address; /* here for 64-bit alignment */
u32 source_index;
char source[4]; /* pad to 64 bits so sizeof() works in all cases */
};
/*
* END: of definitions for PCI Routing tables
*/
#endif /* __ACTYPES_H__ */