1
linux/kernel/kexec_internal.h

43 lines
1.3 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 07:07:57 -07:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef LINUX_KEXEC_INTERNAL_H
#define LINUX_KEXEC_INTERNAL_H
#include <linux/kexec.h>
crash: remove dependency of FA_DUMP on CRASH_DUMP In kdump kernel, /proc/vmcore is an elf file mapping the crashed kernel's old memory content. Its elf header is constructed in 1st kernel and passed to kdump kernel via elfcorehdr_addr. Config CRASH_DUMP enables the code of 1st kernel's old memory accessing in different architectures. Currently, config FA_DUMP has dependency on CRASH_DUMP because fadump needs access global variable 'elfcorehdr_addr' to judge if it's in kdump kernel within function is_kdump_kernel(). In the current kernel/crash_dump.c, variable 'elfcorehdr_addr' is defined, and function setup_elfcorehdr() used to parse kernel parameter to fetch the passed value of elfcorehdr_addr. Only for accessing elfcorehdr_addr, FA_DUMP really doesn't have to depends on CRASH_DUMP. To remove the dependency of FA_DUMP on CRASH_DUMP to avoid confusion, rename kernel/crash_dump.c to kernel/elfcorehdr.c, and build it when CONFIG_VMCORE_INFO is ebabled. With this, FA_DUMP doesn't need to depend on CRASH_DUMP. [bhe@redhat.com: power/fadump: make FA_DUMP select CRASH_DUMP] Link: https://lkml.kernel.org/r/Zb8D1ASrgX0qVm9z@MiWiFi-R3L-srv Link: https://lkml.kernel.org/r/20240124051254.67105-4-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-23 22:12:43 -07:00
struct kexec_segment;
struct kimage *do_kimage_alloc_init(void);
int sanity_check_segment_list(struct kimage *image);
void kimage_free_page_list(struct list_head *list);
void kimage_free(struct kimage *image);
int kimage_load_segment(struct kimage *image, struct kexec_segment *segment);
void kimage_terminate(struct kimage *image);
int kimage_is_destination_range(struct kimage *image,
unsigned long start, unsigned long end);
panic, kexec: make __crash_kexec() NMI safe Attempting to get a crash dump out of a debug PREEMPT_RT kernel via an NMI panic() doesn't work. The cause of that lies in the PREEMPT_RT definition of mutex_trylock(): if (IS_ENABLED(CONFIG_DEBUG_RT_MUTEXES) && WARN_ON_ONCE(!in_task())) return 0; This prevents an nmi_panic() from executing the main body of __crash_kexec() which does the actual kexec into the kdump kernel. The warning and return are explained by: 6ce47fd961fa ("rtmutex: Warn if trylock is called from hard/softirq context") [...] The reasons for this are: 1) There is a potential deadlock in the slowpath 2) Another cpu which blocks on the rtmutex will boost the task which allegedly locked the rtmutex, but that cannot work because the hard/softirq context borrows the task context. Furthermore, grabbing the lock isn't NMI safe, so do away with kexec_mutex and replace it with an atomic variable. This is somewhat overzealous as *some* callsites could keep using a mutex (e.g. the sysfs-facing ones like crash_shrink_memory()), but this has the benefit of involving a single unified lock and preventing any future NMI-related surprises. Tested by triggering NMI panics via: $ echo 1 > /proc/sys/kernel/panic_on_unrecovered_nmi $ echo 1 > /proc/sys/kernel/unknown_nmi_panic $ echo 1 > /proc/sys/kernel/panic $ ipmitool power diag Link: https://lkml.kernel.org/r/20220630223258.4144112-3-vschneid@redhat.com Fixes: 6ce47fd961fa ("rtmutex: Warn if trylock is called from hard/softirq context") Signed-off-by: Valentin Schneider <vschneid@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baoquan He <bhe@redhat.com> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Juri Lelli <jlelli@redhat.com> Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-30 15:32:58 -07:00
/*
* Whatever is used to serialize accesses to the kexec_crash_image needs to be
* NMI safe, as __crash_kexec() can happen during nmi_panic(), so here we use a
* "simple" atomic variable that is acquired with a cmpxchg().
*/
extern atomic_t __kexec_lock;
static inline bool kexec_trylock(void)
{
int old = 0;
return atomic_try_cmpxchg_acquire(&__kexec_lock, &old, 1);
panic, kexec: make __crash_kexec() NMI safe Attempting to get a crash dump out of a debug PREEMPT_RT kernel via an NMI panic() doesn't work. The cause of that lies in the PREEMPT_RT definition of mutex_trylock(): if (IS_ENABLED(CONFIG_DEBUG_RT_MUTEXES) && WARN_ON_ONCE(!in_task())) return 0; This prevents an nmi_panic() from executing the main body of __crash_kexec() which does the actual kexec into the kdump kernel. The warning and return are explained by: 6ce47fd961fa ("rtmutex: Warn if trylock is called from hard/softirq context") [...] The reasons for this are: 1) There is a potential deadlock in the slowpath 2) Another cpu which blocks on the rtmutex will boost the task which allegedly locked the rtmutex, but that cannot work because the hard/softirq context borrows the task context. Furthermore, grabbing the lock isn't NMI safe, so do away with kexec_mutex and replace it with an atomic variable. This is somewhat overzealous as *some* callsites could keep using a mutex (e.g. the sysfs-facing ones like crash_shrink_memory()), but this has the benefit of involving a single unified lock and preventing any future NMI-related surprises. Tested by triggering NMI panics via: $ echo 1 > /proc/sys/kernel/panic_on_unrecovered_nmi $ echo 1 > /proc/sys/kernel/unknown_nmi_panic $ echo 1 > /proc/sys/kernel/panic $ ipmitool power diag Link: https://lkml.kernel.org/r/20220630223258.4144112-3-vschneid@redhat.com Fixes: 6ce47fd961fa ("rtmutex: Warn if trylock is called from hard/softirq context") Signed-off-by: Valentin Schneider <vschneid@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baoquan He <bhe@redhat.com> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Juri Lelli <jlelli@redhat.com> Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-30 15:32:58 -07:00
}
static inline void kexec_unlock(void)
{
atomic_set_release(&__kexec_lock, 0);
}
#ifdef CONFIG_KEXEC_FILE
kexec, x86/purgatory: Unbreak it and clean it up The purgatory code defines global variables which are referenced via a symbol lookup in the kexec code (core and arch). A recent commit addressing sparse warnings made these static and thereby broke kexec_file. Why did this happen? Simply because the whole machinery is undocumented and lacks any form of forward declarations. The variable names are unspecific and lack a prefix, so adding forward declarations creates shadow variables in the core code. Aside of that the code relies on magic constants and duplicate struct definitions with no way to ensure that these things stay in sync. The section placement of the purgatory variables happened by chance and not by design. Unbreak kexec and cleanup the mess: - Add proper forward declarations and document the usage - Use common struct definition - Use the proper common defines instead of magic constants - Add a purgatory_ prefix to have a proper name space - Use ARRAY_SIZE() instead of a homebrewn reimplementation - Add proper sections to the purgatory variables [ From Mike ] Fixes: 72042a8c7b01 ("x86/purgatory: Make functions and variables static") Reported-by: Mike Galbraith <<efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Tobin C. Harding" <me@tobin.cc> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703101315140.3681@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-10 05:17:18 -07:00
#include <linux/purgatory.h>
void kimage_file_post_load_cleanup(struct kimage *image);
extern char kexec_purgatory[];
extern size_t kexec_purgatory_size;
#else /* CONFIG_KEXEC_FILE */
static inline void kimage_file_post_load_cleanup(struct kimage *image) { }
#endif /* CONFIG_KEXEC_FILE */
#endif /* LINUX_KEXEC_INTERNAL_H */