kevin/linux
1
Fork 0
Code
c289f4de8e
linux/drivers/usb/fotg210/Kconfig

39 lines
1.2 KiB
Plaintext
Raw Normal View History

usb: fotg210: Collect pieces of dual mode controller The Faraday FOTG210 is a dual-mode OTG USB controller that can act as host, peripheral or both. To be able to probe from one hardware description and to follow the pattern of other dual- mode controllers such as MUSB or MTU3 we need to collect the two, currently completely separate drivers in the same directory. After this, users need to select the main symbol USB_FOTG210 and then each respective subdriver. We pave the road to compile both drivers into the same kernel and select the one we want to use at probe() time, and possibly add OTG support in the end. This patch doesn't do much more than create the new symbol and collect the drivers in one place. We also add a comment for the section of dual-mode controllers in the Kconfig file so people can see what these selections are about. Also add myself as maintainer as there has been little response on my patches to these drivers. Cc: Fabian Vogt <fabian@ritter-vogt.de> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221023144708.3596563-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23 07:47:06 -07:00
# SPDX-License-Identifier: GPL-2.0
config USB_FOTG210
tristate "Faraday FOTG210 USB2 Dual Role controller"
depends on USB || USB_GADGET
depends on HAS_DMA && HAS_IOMEM
usb: USB_FOTG210 should depend on ARCH_GEMINI The Faraday Technology FOTG210 USB2 Dual Role Controller is only present on Cortina Systems Gemini SoCs. Hence add a dependency on ARCH_GEMINI, to prevent asking the user about its drivers when configuring a kernel without Cortina Systems Gemini SoC support. Fixes: 1dd33a9f1b95ab59 ("usb: fotg210: Collect pieces of dual mode controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/a989b3b798ecaf3b45f35160e30e605636d66a77.1669044086.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-21 08:22:19 -07:00
depends on ARCH_GEMINI || COMPILE_TEST
usb: fotg210: Collect pieces of dual mode controller The Faraday FOTG210 is a dual-mode OTG USB controller that can act as host, peripheral or both. To be able to probe from one hardware description and to follow the pattern of other dual- mode controllers such as MUSB or MTU3 we need to collect the two, currently completely separate drivers in the same directory. After this, users need to select the main symbol USB_FOTG210 and then each respective subdriver. We pave the road to compile both drivers into the same kernel and select the one we want to use at probe() time, and possibly add OTG support in the end. This patch doesn't do much more than create the new symbol and collect the drivers in one place. We also add a comment for the section of dual-mode controllers in the Kconfig file so people can see what these selections are about. Also add myself as maintainer as there has been little response on my patches to these drivers. Cc: Fabian Vogt <fabian@ritter-vogt.de> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221023144708.3596563-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23 07:47:06 -07:00
default ARCH_GEMINI
usb: fotg2: add Gemini-specific handling The Cortina Systems Gemini has bolted on a PHY inside the silicon that can be handled by six bits in a MISC register in the system controller. If we are running on Gemini, look up a syscon regmap through a phandle and enable VBUS and optionally the Mini-B connector. If the device is flagged as "wakeup-source" using the standard DT bindings, we also enable this in the global controller for respective port. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221109200554.1957185-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09 13:05:54 -07:00
select MFD_SYSCON
usb: fotg210: Collect pieces of dual mode controller The Faraday FOTG210 is a dual-mode OTG USB controller that can act as host, peripheral or both. To be able to probe from one hardware description and to follow the pattern of other dual- mode controllers such as MUSB or MTU3 we need to collect the two, currently completely separate drivers in the same directory. After this, users need to select the main symbol USB_FOTG210 and then each respective subdriver. We pave the road to compile both drivers into the same kernel and select the one we want to use at probe() time, and possibly add OTG support in the end. This patch doesn't do much more than create the new symbol and collect the drivers in one place. We also add a comment for the section of dual-mode controllers in the Kconfig file so people can see what these selections are about. Also add myself as maintainer as there has been little response on my patches to these drivers. Cc: Fabian Vogt <fabian@ritter-vogt.de> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221023144708.3596563-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23 07:47:06 -07:00
help
Faraday FOTG210 is a dual-mode USB controller that can act
in both host controller and peripheral controller mode.
if USB_FOTG210
config USB_FOTG210_HCD
usb: fotg210: Compile into one module It is since ages perfectly possible to compile both of these modules into the same kernel, which makes no sense since it is one piece of hardware. Compile one module named "fotg210.ko" for both HCD and UDC drivers by collecting the init calls into a fotg210-core.c file and start to centralize things handling one and the same piece of hardware. Stub out the initcalls if one or the other part of the driver was not selected. Tested by compiling one or the other or both of the drivers into the kernel and as modules. Cc: Fabian Vogt <fabian@ritter-vogt.de> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221023144708.3596563-2-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23 07:47:07 -07:00
bool "Faraday FOTG210 USB Host Controller support"
usb: fotg210: Fix Kconfig for USB host modules The kernel robot reports a link failure when activating the FOTG210 host subdriver with =y on a system where the USB host core is a module (CONFIG_USB=m). This is a bit of special case, so mimic the Kconfig incantations from DWC3: let the subdrivers for host or peripheral depend on the host or gadget support being =y or the same as the FOTG210 core itself. This should ensure that either: - The host (CONFIG_USB) or gadget (CONFIG_GADGET) is compiled in and then the FOTG210 can be either module or compiled in. - The host or gadget is modular, and then the FOTG210 module must be a module too, or we cannot resolve the symbols at link time. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-usb/202211112132.0BUPGKCd-lkp@intel.com/ Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221111144821.113665-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-11 07:48:21 -07:00
depends on USB=y || USB=USB_FOTG210
usb: fotg210: Collect pieces of dual mode controller The Faraday FOTG210 is a dual-mode OTG USB controller that can act as host, peripheral or both. To be able to probe from one hardware description and to follow the pattern of other dual- mode controllers such as MUSB or MTU3 we need to collect the two, currently completely separate drivers in the same directory. After this, users need to select the main symbol USB_FOTG210 and then each respective subdriver. We pave the road to compile both drivers into the same kernel and select the one we want to use at probe() time, and possibly add OTG support in the end. This patch doesn't do much more than create the new symbol and collect the drivers in one place. We also add a comment for the section of dual-mode controllers in the Kconfig file so people can see what these selections are about. Also add myself as maintainer as there has been little response on my patches to these drivers. Cc: Fabian Vogt <fabian@ritter-vogt.de> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221023144708.3596563-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23 07:47:06 -07:00
help
Faraday FOTG210 is an OTG controller which can be configured as
an USB2.0 host. It is designed to meet USB2.0 EHCI specification
with minor modification.
To compile this driver as a module, choose M here: the
module will be called fotg210-hcd.
config USB_FOTG210_UDC
usb: fotg210: Fix Kconfig for USB host modules The kernel robot reports a link failure when activating the FOTG210 host subdriver with =y on a system where the USB host core is a module (CONFIG_USB=m). This is a bit of special case, so mimic the Kconfig incantations from DWC3: let the subdrivers for host or peripheral depend on the host or gadget support being =y or the same as the FOTG210 core itself. This should ensure that either: - The host (CONFIG_USB) or gadget (CONFIG_GADGET) is compiled in and then the FOTG210 can be either module or compiled in. - The host or gadget is modular, and then the FOTG210 module must be a module too, or we cannot resolve the symbols at link time. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-usb/202211112132.0BUPGKCd-lkp@intel.com/ Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221111144821.113665-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-11 07:48:21 -07:00
depends on USB_GADGET=y || USB_GADGET=USB_FOTG210
usb: fotg210: Compile into one module It is since ages perfectly possible to compile both of these modules into the same kernel, which makes no sense since it is one piece of hardware. Compile one module named "fotg210.ko" for both HCD and UDC drivers by collecting the init calls into a fotg210-core.c file and start to centralize things handling one and the same piece of hardware. Stub out the initcalls if one or the other part of the driver was not selected. Tested by compiling one or the other or both of the drivers into the kernel and as modules. Cc: Fabian Vogt <fabian@ritter-vogt.de> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221023144708.3596563-2-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23 07:47:07 -07:00
bool "Faraday FOTG210 USB Peripheral Controller support"
usb: fotg210: Collect pieces of dual mode controller The Faraday FOTG210 is a dual-mode OTG USB controller that can act as host, peripheral or both. To be able to probe from one hardware description and to follow the pattern of other dual- mode controllers such as MUSB or MTU3 we need to collect the two, currently completely separate drivers in the same directory. After this, users need to select the main symbol USB_FOTG210 and then each respective subdriver. We pave the road to compile both drivers into the same kernel and select the one we want to use at probe() time, and possibly add OTG support in the end. This patch doesn't do much more than create the new symbol and collect the drivers in one place. We also add a comment for the section of dual-mode controllers in the Kconfig file so people can see what these selections are about. Also add myself as maintainer as there has been little response on my patches to these drivers. Cc: Fabian Vogt <fabian@ritter-vogt.de> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221023144708.3596563-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23 07:47:06 -07:00
help
Faraday USB2.0 OTG controller which can be configured as
usb: fotg210: fix a Kconfig spelling mistake Correct a spelling mistake (reported by codespell). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230124233511.23616-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24 16:35:11 -07:00
high speed or full speed USB device. This driver supports
usb: fotg210: Collect pieces of dual mode controller The Faraday FOTG210 is a dual-mode OTG USB controller that can act as host, peripheral or both. To be able to probe from one hardware description and to follow the pattern of other dual- mode controllers such as MUSB or MTU3 we need to collect the two, currently completely separate drivers in the same directory. After this, users need to select the main symbol USB_FOTG210 and then each respective subdriver. We pave the road to compile both drivers into the same kernel and select the one we want to use at probe() time, and possibly add OTG support in the end. This patch doesn't do much more than create the new symbol and collect the drivers in one place. We also add a comment for the section of dual-mode controllers in the Kconfig file so people can see what these selections are about. Also add myself as maintainer as there has been little response on my patches to these drivers. Cc: Fabian Vogt <fabian@ritter-vogt.de> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221023144708.3596563-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23 07:47:06 -07:00
Bulk Transfer so far.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "fotg210-udc".
endif
Copy Permalink