kevin/linux
1
Fork 0
Code
c289f4de8e
linux/drivers/thermal/k3_j72xx_bandgap.c

610 lines
15 KiB
C
Raw Normal View History

thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
// SPDX-License-Identifier: GPL-2.0
/*
* TI Bandgap temperature sensor driver for J72XX SoC Family
*
* Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
*/
#include <linux/math.h>
#include <linux/math64.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
thermal: Explicitly include correct DT includes The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-14 10:50:07 -07:00
#include <linux/platform_device.h>
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
#include <linux/pm_runtime.h>
#include <linux/err.h>
#include <linux/types.h>
#include <linux/io.h>
#include <linux/thermal.h>
#include <linux/of.h>
#include <linux/delay.h>
#include <linux/slab.h>
#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4
#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0
#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x300
#define K3_VTM_MISC_CTRL_OFFSET 0xc
#define K3_VTM_TMPSENS_STAT_OFFSET 0x8
#define K3_VTM_ANYMAXT_OUTRG_ALERT_EN 0x1
#define K3_VTM_MISC_CTRL2_OFFSET 0x10
#define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff
#define K3_VTM_MAX_NUM_TS 8
#define K3_VTM_TMPSENS_CTRL_SOC BIT(5)
#define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6)
#define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7)
#define K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN BIT(11)
#define K3_VTM_CORRECTION_TEMP_CNT 3
#define MINUS40CREF 5
#define PLUS30CREF 253
#define PLUS125CREF 730
#define PLUS150CREF 940
#define TABLE_SIZE 1024
#define MAX_TEMP 123000
#define COOL_DOWN_TEMP 105000
#define FACTORS_REDUCTION 13
static int *derived_table;
static int compute_value(int index, const s64 *factors, int nr_factors,
int reduction)
{
s64 value = 0;
int i;
for (i = 0; i < nr_factors; i++)
value += factors[i] * int_pow(index, i);
return (int)div64_s64(value, int_pow(10, reduction));
}
static void init_table(int factors_size, int *table, const s64 *factors)
{
int i;
for (i = 0; i < TABLE_SIZE; i++)
table[i] = compute_value(i, factors, factors_size,
FACTORS_REDUCTION);
}
/**
* struct err_values - structure containing error/reference values
* @refs: reference error values for -40C, 30C, 125C & 150C
* @errs: Actual error values for -40C, 30C, 125C & 150C read from the efuse
*/
struct err_values {
int refs[4];
int errs[4];
};
static void create_table_segments(struct err_values *err_vals, int seg,
int *ref_table)
{
int m = 0, c, num, den, i, err, idx1, idx2, err1, err2, ref1, ref2;
if (seg == 0)
idx1 = 0;
else
idx1 = err_vals->refs[seg];
idx2 = err_vals->refs[seg + 1];
err1 = err_vals->errs[seg];
err2 = err_vals->errs[seg + 1];
ref1 = err_vals->refs[seg];
ref2 = err_vals->refs[seg + 1];
/*
* Calculate the slope with adc values read from the register
* as the y-axis param and err in adc value as x-axis param
*/
num = ref2 - ref1;
den = err2 - err1;
if (den)
m = num / den;
c = ref2 - m * err2;
/*
* Take care of divide by zero error if error values are same
* Or when the slope is 0
*/
if (den != 0 && m != 0) {
for (i = idx1; i <= idx2; i++) {
err = (i - c) / m;
if (((i + err) < 0) || ((i + err) >= TABLE_SIZE))
continue;
derived_table[i] = ref_table[i + err];
}
} else { /* Constant error take care of divide by zero */
for (i = idx1; i <= idx2; i++) {
if (((i + err1) < 0) || ((i + err1) >= TABLE_SIZE))
continue;
derived_table[i] = ref_table[i + err1];
}
}
}
static int prep_lookup_table(struct err_values *err_vals, int *ref_table)
{
int inc, i, seg;
/*
* Fill up the lookup table under 3 segments
* region -40C to +30C
* region +30C to +125C
* region +125C to +150C
*/
for (seg = 0; seg < 3; seg++)
create_table_segments(err_vals, seg, ref_table);
/* Get to the first valid temperature */
i = 0;
while (!derived_table[i])
i++;
/*
* Get to the last zero index and back fill the temperature for
* sake of continuity
*/
if (i) {
/* 300 milli celsius steps */
while (i--)
derived_table[i] = derived_table[i + 1] - 300;
}
/*
* Fill the last trailing 0s which are unfilled with increments of
* 100 milli celsius till 1023 code
*/
i = TABLE_SIZE - 1;
while (!derived_table[i])
i--;
i++;
inc = 1;
while (i < TABLE_SIZE) {
derived_table[i] = derived_table[i - 1] + inc * 100;
i++;
}
return 0;
}
struct k3_thermal_data;
struct k3_j72xx_bandgap {
struct device *dev;
void __iomem *base;
void __iomem *cfg2_base;
struct k3_thermal_data *ts_data[K3_VTM_MAX_NUM_TS];
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
int cnt;
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
};
/* common data structures */
struct k3_thermal_data {
struct k3_j72xx_bandgap *bgp;
u32 ctrl_offset;
u32 stat_offset;
};
static int two_cmp(int tmp, int mask)
{
tmp = ~(tmp);
tmp &= mask;
tmp += 1;
/* Return negative value */
return (0 - tmp);
}
static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
unsigned int s2)
{
int d01 = abs(s0 - s1);
int d02 = abs(s0 - s2);
int d12 = abs(s1 - s2);
if (d01 <= d02 && d01 <= d12)
return (s0 + s1) / 2;
if (d02 <= d01 && d02 <= d12)
return (s0 + s2) / 2;
return (s1 + s2) / 2;
}
static inline int k3_bgp_read_temp(struct k3_thermal_data *devdata,
int *temp)
{
struct k3_j72xx_bandgap *bgp;
unsigned int dtemp, s0, s1, s2;
bgp = devdata->bgp;
/*
* Errata is applicable for am654 pg 1.0 silicon/J7ES. There
* is a variation of the order for certain degree centigrade on AM654.
* Work around that by getting the average of two closest
* readings out of three readings everytime we want to
* report temperatures.
*
* Errata workaround.
*/
s0 = readl(bgp->base + devdata->stat_offset) &
K3_VTM_TS_STAT_DTEMP_MASK;
s1 = readl(bgp->base + devdata->stat_offset) &
K3_VTM_TS_STAT_DTEMP_MASK;
s2 = readl(bgp->base + devdata->stat_offset) &
K3_VTM_TS_STAT_DTEMP_MASK;
dtemp = vtm_get_best_value(s0, s1, s2);
if (dtemp < 0 || dtemp >= TABLE_SIZE)
return -EINVAL;
*temp = derived_table[dtemp];
return 0;
}
/* Get temperature callback function for thermal zone */
thermal/drivers/banggap: Switch to new of API The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Link: https://lore.kernel.org/r/20220804224349.1926752-22-daniel.lezcano@linexp.org Reviewed-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-08-04 15:43:37 -07:00
static int k3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
{
thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers The thermal zone device structure is exposed to the different drivers and obviously they access the internals while that should be restricted to the core thermal code. In order to self-encapsulate the thermal core code, we need to prevent the drivers accessing directly the thermal zone structure and provide accessor functions to deal with. Use the devdata accessor introduced in the previous patch. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062 Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> #spread Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-01 13:14:30 -07:00
return k3_bgp_read_temp(thermal_zone_device_priv(tz), temp);
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
}
thermal/drivers/banggap: Switch to new of API The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Link: https://lore.kernel.org/r/20220804224349.1926752-22-daniel.lezcano@linexp.org Reviewed-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-08-04 15:43:37 -07:00
static const struct thermal_zone_device_ops k3_of_thermal_ops = {
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
.get_temp = k3_thermal_get_temp,
};
static int k3_j72xx_bandgap_temp_to_adc_code(int temp)
{
int low = 0, high = TABLE_SIZE - 1, mid;
if (temp > 160000 || temp < -50000)
return -EINVAL;
/* Binary search to find the adc code */
while (low < (high - 1)) {
mid = (low + high) / 2;
if (temp <= derived_table[mid])
high = mid;
else
low = mid;
}
return mid;
}
static void get_efuse_values(int id, struct k3_thermal_data *data, int *err,
thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure 'fuse_base' is only needed during the initial probe function to provide data for a software trimming method for some of TI's devices affected by the i2128 erratum. The devices not affected will not use this region Remove fuse_base from the main k3_j72xx_bandgap structure Signed-off-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20221031232702.10339-4-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-10-31 16:26:54 -07:00
void __iomem *fuse_base)
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
{
int i, tmp, pow;
int ct_offsets[5][K3_VTM_CORRECTION_TEMP_CNT] = {
{ 0x0, 0x8, 0x4 },
{ 0x0, 0x8, 0x4 },
{ 0x0, -1, 0x4 },
{ 0x0, 0xC, -1 },
{ 0x0, 0xc, 0x8 }
};
int ct_bm[5][K3_VTM_CORRECTION_TEMP_CNT] = {
{ 0x3f, 0x1fe000, 0x1ff },
{ 0xfc0, 0x1fe000, 0x3fe00 },
{ 0x3f000, 0x7f800000, 0x7fc0000 },
{ 0xfc0000, 0x1fe0, 0x1f800000 },
{ 0x3f000000, 0x1fe000, 0x1ff0 }
};
for (i = 0; i < 3; i++) {
/* Extract the offset value using bit-mask */
if (ct_offsets[id][i] == -1 && i == 1) {
/* 25C offset Case of Sensor 2 split between 2 regs */
thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure 'fuse_base' is only needed during the initial probe function to provide data for a software trimming method for some of TI's devices affected by the i2128 erratum. The devices not affected will not use this region Remove fuse_base from the main k3_j72xx_bandgap structure Signed-off-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20221031232702.10339-4-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-10-31 16:26:54 -07:00
tmp = (readl(fuse_base + 0x8) & 0xE0000000) >> (29);
tmp |= ((readl(fuse_base + 0xC) & 0x1F) << 3);
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
pow = tmp & 0x80;
} else if (ct_offsets[id][i] == -1 && i == 2) {
/* 125C Case of Sensor 3 split between 2 regs */
thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure 'fuse_base' is only needed during the initial probe function to provide data for a software trimming method for some of TI's devices affected by the i2128 erratum. The devices not affected will not use this region Remove fuse_base from the main k3_j72xx_bandgap structure Signed-off-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20221031232702.10339-4-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-10-31 16:26:54 -07:00
tmp = (readl(fuse_base + 0x4) & 0xF8000000) >> (27);
tmp |= ((readl(fuse_base + 0x8) & 0xF) << 5);
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
pow = tmp & 0x100;
} else {
thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure 'fuse_base' is only needed during the initial probe function to provide data for a software trimming method for some of TI's devices affected by the i2128 erratum. The devices not affected will not use this region Remove fuse_base from the main k3_j72xx_bandgap structure Signed-off-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20221031232702.10339-4-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-10-31 16:26:54 -07:00
tmp = readl(fuse_base + ct_offsets[id][i]);
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
tmp &= ct_bm[id][i];
tmp = tmp >> __ffs(ct_bm[id][i]);
/* Obtain the sign bit pow*/
pow = ct_bm[id][i] >> __ffs(ct_bm[id][i]);
pow += 1;
pow /= 2;
}
/* Check for negative value */
if (tmp & pow) {
/* 2's complement value */
tmp = two_cmp(tmp, ct_bm[id][i] >> __ffs(ct_bm[id][i]));
}
err[i] = tmp;
}
/* Err value for 150C is set to 0 */
err[i] = 0;
}
static void print_look_up_table(struct device *dev, int *ref_table)
{
int i;
dev_dbg(dev, "The contents of derived array\n");
dev_dbg(dev, "Code Temperature\n");
for (i = 0; i < TABLE_SIZE; i++)
dev_dbg(dev, "%d %d %d\n", i, derived_table[i], ref_table[i]);
}
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
static void k3_j72xx_bandgap_init_hw(struct k3_j72xx_bandgap *bgp)
{
struct k3_thermal_data *data;
int id, high_max, low_temp;
u32 val;
for (id = 0; id < bgp->cnt; id++) {
data = bgp->ts_data[id];
val = readl(bgp->cfg2_base + data->ctrl_offset);
val |= (K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN |
K3_VTM_TMPSENS_CTRL_SOC |
K3_VTM_TMPSENS_CTRL_CLRZ | BIT(4));
writel(val, bgp->cfg2_base + data->ctrl_offset);
}
/*
* Program TSHUT thresholds
* Step 1: set the thresholds to ~123C and 105C WKUP_VTM_MISC_CTRL2
* Step 2: WKUP_VTM_TMPSENS_CTRL_j set the MAXT_OUTRG_EN bit
* This is already taken care as per of init
* Step 3: WKUP_VTM_MISC_CTRL set the ANYMAXT_OUTRG_ALERT_EN bit
*/
high_max = k3_j72xx_bandgap_temp_to_adc_code(MAX_TEMP);
low_temp = k3_j72xx_bandgap_temp_to_adc_code(COOL_DOWN_TEMP);
writel((low_temp << 16) | high_max, bgp->cfg2_base + K3_VTM_MISC_CTRL2_OFFSET);
writel(K3_VTM_ANYMAXT_OUTRG_ALERT_EN, bgp->cfg2_base + K3_VTM_MISC_CTRL_OFFSET);
}
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
struct k3_j72xx_bandgap_data {
thermal/drivers/k3_j72xx_bandgap: Use bool for i2128 erratum flag Some of TI's J721E SoCs require a software trimming method to report temperatures accurately. Currently we are using a few different data types to indicate when we should apply the erratum. Change the 'workaround_needed' variable's data type to a bool to align with how we are using this variable currently. Signed-off-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20221031232702.10339-3-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-10-31 16:26:53 -07:00
const bool has_errata_i2128;
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
};
static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
{
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
const struct k3_j72xx_bandgap_data *driver_data;
struct thermal_zone_device *ti_thermal;
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
struct device *dev = &pdev->dev;
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
bool workaround_needed = false;
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
struct k3_j72xx_bandgap *bgp;
struct k3_thermal_data *data;
struct err_values err_vals;
thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure 'fuse_base' is only needed during the initial probe function to provide data for a software trimming method for some of TI's devices affected by the i2128 erratum. The devices not affected will not use this region Remove fuse_base from the main k3_j72xx_bandgap structure Signed-off-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20221031232702.10339-4-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-10-31 16:26:54 -07:00
void __iomem *fuse_base;
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
int ret = 0, val, id;
struct resource *res;
int *ref_table;
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
const s64 golden_factors[] = {
-490019999999999936,
3251200000000000,
-1705800000000,
603730000,
-92627,
};
const s64 pvt_wa_factors[] = {
-415230000000000000,
3126600000000000,
-1157800000000,
};
bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
if (!bgp)
return -ENOMEM;
bgp->dev = dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
bgp->base = devm_ioremap_resource(dev, res);
if (IS_ERR(bgp->base))
return PTR_ERR(bgp->base);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
bgp->cfg2_base = devm_ioremap_resource(dev, res);
if (IS_ERR(bgp->cfg2_base))
return PTR_ERR(bgp->cfg2_base);
driver_data = of_device_get_match_data(dev);
if (driver_data)
workaround_needed = driver_data->has_errata_i2128;
thermal/drivers/k3_j72xx_bandgap: Map fuse_base only for erratum workaround Some of TI's J721E SoCs require a software trimming procedure for the temperature monitors to function properly. To determine if a particular J721E is not affected by this erratum, both bits in the WKUP_SPARE_FUSE0 region must be set. Other SoCs, not affected by this erratum, will not need this region. Map the 'fuse_base' region only when the erratum fix is needed. Signed-off-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20221031232702.10339-5-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-10-31 16:26:55 -07:00
/*
* Some of TI's J721E SoCs require a software trimming procedure
* for the temperature monitors to function properly. To determine
* if this particular SoC is NOT affected, both bits in the
* WKUP_SPARE_FUSE0[31:30] will be set (0xC0000000) indicating
* when software trimming should NOT be applied.
*
* https://www.ti.com/lit/er/sprz455c/sprz455c.pdf
*/
if (workaround_needed) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
fuse_base = devm_ioremap_resource(dev, res);
if (IS_ERR(fuse_base))
return PTR_ERR(fuse_base);
if ((readl(fuse_base) & 0xc0000000) == 0xc0000000)
workaround_needed = false;
}
dev_dbg(bgp->dev, "Work around %sneeded\n",
workaround_needed ? "" : "not ");
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
pm_runtime_enable(dev);
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
pm_runtime_put_noidle(dev);
pm_runtime_disable(dev);
return ret;
}
/* Get the sensor count in the VTM */
val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
bgp->cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
bgp->cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
data = devm_kcalloc(bgp->dev, bgp->cnt, sizeof(*data), GFP_KERNEL);
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
if (!data) {
ret = -ENOMEM;
goto err_alloc;
}
ref_table = kzalloc(sizeof(*ref_table) * TABLE_SIZE, GFP_KERNEL);
if (!ref_table) {
ret = -ENOMEM;
goto err_alloc;
}
derived_table = devm_kzalloc(bgp->dev, sizeof(*derived_table) * TABLE_SIZE,
GFP_KERNEL);
if (!derived_table) {
ret = -ENOMEM;
thermal/drivers/k3_j72xx_bandgap: Fix ref_table memory leak during probe If an error occurs in the k3_j72xx_bandgap_probe() function the memory allocated to the 'ref_table' will not be released. Add a err_free_ref_table step to the error path to free 'ref_table' Fixes: 72b3fc61c752 ("thermal: k3_j72xx_bandgap: Add the bandgap driver support") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220525213617.30002-1-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-25 14:36:17 -07:00
goto err_free_ref_table;
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
}
if (!workaround_needed)
init_table(5, ref_table, golden_factors);
else
init_table(3, ref_table, pvt_wa_factors);
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
/* Precompute the derived table & fill each thermal sensor struct */
for (id = 0; id < bgp->cnt; id++) {
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
data[id].bgp = bgp;
data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + id * 0x20;
data[id].stat_offset = data[id].ctrl_offset +
K3_VTM_TMPSENS_STAT_OFFSET;
if (workaround_needed) {
/* ref adc values for -40C, 30C & 125C respectively */
err_vals.refs[0] = MINUS40CREF;
err_vals.refs[1] = PLUS30CREF;
err_vals.refs[2] = PLUS125CREF;
err_vals.refs[3] = PLUS150CREF;
thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure 'fuse_base' is only needed during the initial probe function to provide data for a software trimming method for some of TI's devices affected by the i2128 erratum. The devices not affected will not use this region Remove fuse_base from the main k3_j72xx_bandgap structure Signed-off-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20221031232702.10339-4-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-10-31 16:26:54 -07:00
get_efuse_values(id, &data[id], err_vals.errs, fuse_base);
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
}
if (id == 0 && workaround_needed)
prep_lookup_table(&err_vals, ref_table);
else if (id == 0 && !workaround_needed)
memcpy(derived_table, ref_table, TABLE_SIZE * 4);
bgp->ts_data[id] = &data[id];
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
}
k3_j72xx_bandgap_init_hw(bgp);
/* Register the thermal sensors */
for (id = 0; id < bgp->cnt; id++) {
thermal/drivers/banggap: Switch to new of API The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Link: https://lore.kernel.org/r/20220804224349.1926752-22-daniel.lezcano@linexp.org Reviewed-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-08-04 15:43:37 -07:00
ti_thermal = devm_thermal_of_zone_register(bgp->dev, id, &data[id],
&k3_of_thermal_ops);
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
if (IS_ERR(ti_thermal)) {
dev_err(bgp->dev, "thermal zone device is NULL\n");
ret = PTR_ERR(ti_thermal);
thermal/drivers/k3_j72xx_bandgap: Fix ref_table memory leak during probe If an error occurs in the k3_j72xx_bandgap_probe() function the memory allocated to the 'ref_table' will not be released. Add a err_free_ref_table step to the error path to free 'ref_table' Fixes: 72b3fc61c752 ("thermal: k3_j72xx_bandgap: Add the bandgap driver support") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220525213617.30002-1-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-25 14:36:17 -07:00
goto err_free_ref_table;
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
}
}
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
platform_set_drvdata(pdev, bgp);
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
print_look_up_table(dev, ref_table);
/*
* Now that the derived_table has the appropriate look up values
* Free up the ref_table
*/
kfree(ref_table);
return 0;
thermal/drivers/k3_j72xx_bandgap: Fix ref_table memory leak during probe If an error occurs in the k3_j72xx_bandgap_probe() function the memory allocated to the 'ref_table' will not be released. Add a err_free_ref_table step to the error path to free 'ref_table' Fixes: 72b3fc61c752 ("thermal: k3_j72xx_bandgap: Add the bandgap driver support") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220525213617.30002-1-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-25 14:36:17 -07:00
err_free_ref_table:
kfree(ref_table);
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
err_alloc:
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
thermal: k3_j72xx_bandgap: Convert to platform remove callback returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-27 12:37:21 -07:00
static void k3_j72xx_bandgap_remove(struct platform_device *pdev)
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
{
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
}
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
static int k3_j72xx_bandgap_suspend(struct device *dev)
{
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
return 0;
}
static int k3_j72xx_bandgap_resume(struct device *dev)
{
struct k3_j72xx_bandgap *bgp = dev_get_drvdata(dev);
int ret;
pm_runtime_enable(dev);
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
pm_runtime_put_noidle(dev);
pm_runtime_disable(dev);
return ret;
}
k3_j72xx_bandgap_init_hw(bgp);
return 0;
}
static DEFINE_SIMPLE_DEV_PM_OPS(k3_j72xx_bandgap_pm_ops,
k3_j72xx_bandgap_suspend,
k3_j72xx_bandgap_resume);
thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static Fix sparse warnings: drivers/thermal/k3_j72xx_bandgap.c:532:36: sparse: sparse: symbol 'k3_j72xx_bandgap_j721e_data' was not declared. Should it be static? drivers/thermal/k3_j72xx_bandgap.c:536:36: sparse: sparse: symbol 'k3_j72xx_bandgap_j7200_data' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jin Xiaoyun <jinxiaoyun2@huawei.com> Link: https://lore.kernel.org/r/20220613063111.654893-1-jinxiaoyun2@huawei.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-12 23:31:11 -07:00
static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j721e_data = {
thermal/drivers/k3_j72xx_bandgap: Use bool for i2128 erratum flag Some of TI's J721E SoCs require a software trimming method to report temperatures accurately. Currently we are using a few different data types to indicate when we should apply the erratum. Change the 'workaround_needed' variable's data type to a bool to align with how we are using this variable currently. Signed-off-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20221031232702.10339-3-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-10-31 16:26:53 -07:00
.has_errata_i2128 = true,
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
};
thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static Fix sparse warnings: drivers/thermal/k3_j72xx_bandgap.c:532:36: sparse: sparse: symbol 'k3_j72xx_bandgap_j721e_data' was not declared. Should it be static? drivers/thermal/k3_j72xx_bandgap.c:536:36: sparse: sparse: symbol 'k3_j72xx_bandgap_j7200_data' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jin Xiaoyun <jinxiaoyun2@huawei.com> Link: https://lore.kernel.org/r/20220613063111.654893-1-jinxiaoyun2@huawei.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-06-12 23:31:11 -07:00
static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j7200_data = {
thermal/drivers/k3_j72xx_bandgap: Use bool for i2128 erratum flag Some of TI's J721E SoCs require a software trimming method to report temperatures accurately. Currently we are using a few different data types to indicate when we should apply the erratum. Change the 'workaround_needed' variable's data type to a bool to align with how we are using this variable currently. Signed-off-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20221031232702.10339-3-bb@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-10-31 16:26:53 -07:00
.has_errata_i2128 = false,
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
};
static const struct of_device_id of_k3_j72xx_bandgap_match[] = {
{
.compatible = "ti,j721e-vtm",
.data = &k3_j72xx_bandgap_j721e_data,
},
{
.compatible = "ti,j7200-vtm",
.data = &k3_j72xx_bandgap_j7200_data,
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, of_k3_j72xx_bandgap_match);
static struct platform_driver k3_j72xx_bandgap_sensor_driver = {
.probe = k3_j72xx_bandgap_probe,
thermal: k3_j72xx_bandgap: Convert to platform remove callback returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-27 12:37:21 -07:00
.remove_new = k3_j72xx_bandgap_remove,
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
.driver = {
.name = "k3-j72xx-soc-thermal",
.of_match_table = of_k3_j72xx_bandgap_match,
thermal/drivers/k3_j72xx_bandgap: Implement suspend/resume support This add suspend-to-ram support. The derived_table is kept-as is, so the resume is only about pm_runtime_* calls and restoring the same registers as the probe. Extract the hardware initialization procedure to a function called at both probe-time & resume-time. The probe-time loop is split in two to ensure doing the hardware initialization before registering thermal zones. That ensures our callbacks cannot be called while in bad state. The 100ms delay in the hardware initialization sequence was removed. It was initially added to be sure the thresholds are programmed before enabling the interrupt, but in fact it's not needed (tested on J7200 platform). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-04-25 08:32:38 -07:00
.pm = pm_sleep_ptr(&k3_j72xx_bandgap_pm_ops),
thermal: k3_j72xx_bandgap: Add the bandgap driver support Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Currently reading temperatures only is supported. There are no active/passive cooling agent supported. J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455 The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values. It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis. -40C to 30C 30C to 125C 125C to 150C With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC. Tested temperature reading on J721e SoC & J7200 SoC. [daniel.lezcano@linaro.org: Generate look-up tables run-time] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-17 10:29:20 -07:00
},
};
module_platform_driver(k3_j72xx_bandgap_sensor_driver);
MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
Copy Permalink