1
linux/drivers/usb/musb/omap2430.c

325 lines
7.8 KiB
C
Raw Normal View History

/*
* Copyright (C) 2005-2007 by Texas Instruments
* Some code has been taken from tusb6010.c
* Copyrights for that are attributable to:
* Copyright (C) 2006 Nokia Corporation
* Jarkko Nikula <jarkko.nikula@nokia.com>
* Tony Lindgren <tony@atomide.com>
*
* This file is part of the Inventra Controller Driver for Linux.
*
* The Inventra Controller Driver for Linux is free software; you
* can redistribute it and/or modify it under the terms of the GNU
* General Public License version 2 as published by the Free Software
* Foundation.
*
* The Inventra Controller Driver for Linux is distributed in
* the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with The Inventra Controller Driver for Linux ; if not,
* write to the Free Software Foundation, Inc., 59 Temple Place,
* Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/arch/hardware.h>
#include <asm/arch/mux.h>
#include "musb_core.h"
#include "omap2430.h"
#ifdef CONFIG_ARCH_OMAP3430
#define get_cpu_rev() 2
#endif
#define MUSB_TIMEOUT_A_WAIT_BCON 1100
static struct timer_list musb_idle_timer;
static void musb_do_idle(unsigned long _musb)
{
struct musb *musb = (void *)_musb;
unsigned long flags;
u8 power;
u8 devctl;
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
spin_lock_irqsave(&musb->lock, flags);
switch (musb->xceiv.state) {
case OTG_STATE_A_WAIT_BCON:
devctl &= ~MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE) {
musb->xceiv.state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
} else {
musb->xceiv.state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
}
break;
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case OTG_STATE_A_SUSPEND:
/* finish RESUME signaling? */
if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
power = musb_readb(musb->mregs, MUSB_POWER);
power &= ~MUSB_POWER_RESUME;
DBG(1, "root port resume stopped, power %02x\n", power);
musb_writeb(musb->mregs, MUSB_POWER, power);
musb->is_active = 1;
musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
| MUSB_PORT_STAT_RESUME);
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
usb_hcd_poll_rh_status(musb_to_hcd(musb));
/* NOTE: it might really be A_WAIT_BCON ... */
musb->xceiv.state = OTG_STATE_A_HOST;
}
break;
#endif
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case OTG_STATE_A_HOST:
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE)
musb->xceiv.state = OTG_STATE_B_IDLE;
else
musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
#endif
default:
break;
}
spin_unlock_irqrestore(&musb->lock, flags);
}
void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
{
unsigned long default_timeout = jiffies + msecs_to_jiffies(3);
static unsigned long last_timer;
if (timeout == 0)
timeout = default_timeout;
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || ((musb->a_wait_bcon == 0)
&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
del_timer(&musb_idle_timer);
last_timer = jiffies;
return;
}
if (time_after(last_timer, timeout)) {
if (!timer_pending(&musb_idle_timer))
last_timer = timeout;
else {
DBG(4, "Longer idle timer already pending, ignoring\n");
return;
}
}
last_timer = timeout;
DBG(4, "%s inactive, for idle timer for %lu ms\n",
otg_state_string(musb),
(unsigned long)jiffies_to_msecs(timeout - jiffies));
mod_timer(&musb_idle_timer, timeout);
}
void musb_platform_enable(struct musb *musb)
{
}
void musb_platform_disable(struct musb *musb)
{
}
static void omap_vbus_power(struct musb *musb, int is_on, int sleeping)
{
}
static void omap_set_vbus(struct musb *musb, int is_on)
{
u8 devctl;
/* HDRC controls CPEN, but beware current surges during device
* connect. They can trigger transient overcurrent conditions
* that must be ignored.
*/
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (is_on) {
musb->is_active = 1;
musb->xceiv.default_a = 1;
musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
} else {
musb->is_active = 0;
/* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and
* jumping right to B_IDLE...
*/
musb->xceiv.default_a = 0;
musb->xceiv.state = OTG_STATE_B_IDLE;
devctl &= ~MUSB_DEVCTL_SESSION;
MUSB_DEV_MODE(musb);
}
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
DBG(1, "VBUS %s, devctl %02x "
/* otg %3x conf %08x prcm %08x */ "\n",
otg_state_string(musb),
musb_readb(musb->mregs, MUSB_DEVCTL));
}
static int omap_set_power(struct otg_transceiver *x, unsigned mA)
{
return 0;
}
static int musb_platform_resume(struct musb *musb);
void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
{
u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
devctl |= MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
switch (musb_mode) {
case MUSB_HOST:
otg_set_host(&musb->xceiv, musb->xceiv.host);
break;
case MUSB_PERIPHERAL:
otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
break;
case MUSB_OTG:
break;
}
}
int __init musb_platform_init(struct musb *musb)
{
u32 l;
#if defined(CONFIG_ARCH_OMAP2430)
omap_cfg_reg(AE5_2430_USB0HS_STP);
#endif
musb_platform_resume(musb);
l = omap_readl(OTG_SYSCONFIG);
l &= ~ENABLEWAKEUP; /* disable wakeup */
l &= ~NOSTDBY; /* remove possible nostdby */
l |= SMARTSTDBY; /* enable smart standby */
l &= ~AUTOIDLE; /* disable auto idle */
l &= ~NOIDLE; /* remove possible noidle */
l |= SMARTIDLE; /* enable smart idle */
l |= AUTOIDLE; /* enable auto idle */
omap_writel(l, OTG_SYSCONFIG);
l = omap_readl(OTG_INTERFSEL);
l |= ULPI_12PIN;
omap_writel(l, OTG_INTERFSEL);
pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
"sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
omap_readl(OTG_REVISION), omap_readl(OTG_SYSCONFIG),
omap_readl(OTG_SYSSTATUS), omap_readl(OTG_INTERFSEL),
omap_readl(OTG_SIMENABLE));
omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
if (is_host_enabled(musb))
musb->board_set_vbus = omap_set_vbus;
if (is_peripheral_enabled(musb))
musb->xceiv.set_power = omap_set_power;
musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
return 0;
}
int musb_platform_suspend(struct musb *musb)
{
u32 l;
if (!musb->clock)
return 0;
/* in any role */
l = omap_readl(OTG_FORCESTDBY);
l |= ENABLEFORCE; /* enable MSTANDBY */
omap_writel(l, OTG_FORCESTDBY);
l = omap_readl(OTG_SYSCONFIG);
l |= ENABLEWAKEUP; /* enable wakeup */
omap_writel(l, OTG_SYSCONFIG);
if (musb->xceiv.set_suspend)
musb->xceiv.set_suspend(&musb->xceiv, 1);
if (musb->set_clock)
musb->set_clock(musb->clock, 0);
else
clk_disable(musb->clock);
return 0;
}
static int musb_platform_resume(struct musb *musb)
{
u32 l;
if (!musb->clock)
return 0;
if (musb->xceiv.set_suspend)
musb->xceiv.set_suspend(&musb->xceiv, 0);
if (musb->set_clock)
musb->set_clock(musb->clock, 1);
else
clk_enable(musb->clock);
l = omap_readl(OTG_SYSCONFIG);
l &= ~ENABLEWAKEUP; /* disable wakeup */
omap_writel(l, OTG_SYSCONFIG);
l = omap_readl(OTG_FORCESTDBY);
l &= ~ENABLEFORCE; /* disable MSTANDBY */
omap_writel(l, OTG_FORCESTDBY);
return 0;
}
int musb_platform_exit(struct musb *musb)
{
omap_vbus_power(musb, 0 /*off*/, 1);
musb_platform_suspend(musb);
clk_put(musb->clock);
musb->clock = 0;
return 0;
}