kevin/linux
1
Fork 0
Code
bbba11c35b
linux/arch/i386/Makefile.cpu

48 lines
2.1 KiB
Makefile
Raw Normal View History

[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:07 -07:00
# CPU tuning section - shared with UML.
# Must change only cflags-y (or [yn]), not CFLAGS! That makes a difference for UML.
[PATCH] remove gcc-2 checks Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:04:09 -07:00
#-mtune exists since gcc 3.4
[PATCH] i386: use -mcpu, not -mtune, for GCCs older than 3.4 I just noted that -mtune is used, which is only supported on recent GCCs; by reading http://gcc.gnu.org/gcc-3.4/changes.html, you see "-mcpu has been renamed to -mtune.", so for GCC < 3.4 we're not using any specific tuning in the appropriate cases. However -mcpu is deprecated, so use -mtune when possible. This was introduced by commit e9d4dce954a60dc23dd1d967766ca2347b780e54 of the old tree (between 2.6.10-rc3 and 2.6.10) by Linus Torvalds, to remove the use of -march, since that could trigger gcc using SSE on its own. But no attention was used about using -mcpu vs. -mtune. And btw, the old 2.6.4 code (for instance) was: cflags-$(CONFIG_MPENTIUMII) += $(call check_gcc,-march=pentium2,-march=i686) cflags-$(CONFIG_MPENTIUMIII) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUMM) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUM4) += $(call check_gcc,-march=pentium4,-march=i686) Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:09 -07:00
HAS_MTUNE := $(call cc-option-yn, -mtune=i386)
ifeq ($(HAS_MTUNE),y)
[PATCH] i386: Fix usage of -mtune when X86_GENERIC=y or CONFIG_MCORE2=y Hi! I sent this simple patch to lkml about two weeks ago and also cc'ed to Linus, but seems that the patch got ignored. I decided to write to you, because you have modified the relevant file most recently. Below is a copy of the mail that is also available at <http://lkml.org/lkml/2007/2/28/230>. Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 10:27:06 -07:00
tune = $(call cc-option,-mtune=$(1),$(2))
[PATCH] i386: use -mcpu, not -mtune, for GCCs older than 3.4 I just noted that -mtune is used, which is only supported on recent GCCs; by reading http://gcc.gnu.org/gcc-3.4/changes.html, you see "-mcpu has been renamed to -mtune.", so for GCC < 3.4 we're not using any specific tuning in the appropriate cases. However -mcpu is deprecated, so use -mtune when possible. This was introduced by commit e9d4dce954a60dc23dd1d967766ca2347b780e54 of the old tree (between 2.6.10-rc3 and 2.6.10) by Linus Torvalds, to remove the use of -march, since that could trigger gcc using SSE on its own. But no attention was used about using -mcpu vs. -mtune. And btw, the old 2.6.4 code (for instance) was: cflags-$(CONFIG_MPENTIUMII) += $(call check_gcc,-march=pentium2,-march=i686) cflags-$(CONFIG_MPENTIUMIII) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUMM) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUM4) += $(call check_gcc,-march=pentium4,-march=i686) Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:09 -07:00
else
[PATCH] i386: Fix usage of -mtune when X86_GENERIC=y or CONFIG_MCORE2=y Hi! I sent this simple patch to lkml about two weeks ago and also cc'ed to Linus, but seems that the patch got ignored. I decided to write to you, because you have modified the relevant file most recently. Below is a copy of the mail that is also available at <http://lkml.org/lkml/2007/2/28/230>. Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 10:27:06 -07:00
tune = $(call cc-option,-mcpu=$(1),$(2))
[PATCH] i386: use -mcpu, not -mtune, for GCCs older than 3.4 I just noted that -mtune is used, which is only supported on recent GCCs; by reading http://gcc.gnu.org/gcc-3.4/changes.html, you see "-mcpu has been renamed to -mtune.", so for GCC < 3.4 we're not using any specific tuning in the appropriate cases. However -mcpu is deprecated, so use -mtune when possible. This was introduced by commit e9d4dce954a60dc23dd1d967766ca2347b780e54 of the old tree (between 2.6.10-rc3 and 2.6.10) by Linus Torvalds, to remove the use of -march, since that could trigger gcc using SSE on its own. But no attention was used about using -mcpu vs. -mtune. And btw, the old 2.6.4 code (for instance) was: cflags-$(CONFIG_MPENTIUMII) += $(call check_gcc,-march=pentium2,-march=i686) cflags-$(CONFIG_MPENTIUMIII) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUMM) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUM4) += $(call check_gcc,-march=pentium4,-march=i686) Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:09 -07:00
endif
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:07 -07:00
align := $(cc-option-align)
cflags-$(CONFIG_M386) += -march=i386
cflags-$(CONFIG_M486) += -march=i486
cflags-$(CONFIG_M586) += -march=i586
cflags-$(CONFIG_M586TSC) += -march=i586
[PATCH] remove gcc-2 checks Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:04:09 -07:00
cflags-$(CONFIG_M586MMX) += -march=pentium-mmx
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:07 -07:00
cflags-$(CONFIG_M686) += -march=i686
[PATCH] i386: use -mcpu, not -mtune, for GCCs older than 3.4 I just noted that -mtune is used, which is only supported on recent GCCs; by reading http://gcc.gnu.org/gcc-3.4/changes.html, you see "-mcpu has been renamed to -mtune.", so for GCC < 3.4 we're not using any specific tuning in the appropriate cases. However -mcpu is deprecated, so use -mtune when possible. This was introduced by commit e9d4dce954a60dc23dd1d967766ca2347b780e54 of the old tree (between 2.6.10-rc3 and 2.6.10) by Linus Torvalds, to remove the use of -march, since that could trigger gcc using SSE on its own. But no attention was used about using -mcpu vs. -mtune. And btw, the old 2.6.4 code (for instance) was: cflags-$(CONFIG_MPENTIUMII) += $(call check_gcc,-march=pentium2,-march=i686) cflags-$(CONFIG_MPENTIUMIII) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUMM) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUM4) += $(call check_gcc,-march=pentium4,-march=i686) Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:09 -07:00
cflags-$(CONFIG_MPENTIUMII) += -march=i686 $(call tune,pentium2)
cflags-$(CONFIG_MPENTIUMIII) += -march=i686 $(call tune,pentium3)
cflags-$(CONFIG_MPENTIUMM) += -march=i686 $(call tune,pentium3)
cflags-$(CONFIG_MPENTIUM4) += -march=i686 $(call tune,pentium4)
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:07 -07:00
cflags-$(CONFIG_MK6) += -march=k6
# Please note, that patches that add -march=athlon-xp and friends are pointless.
# They make zero difference whatsosever to performance at this time.
[PATCH] remove gcc-2 checks Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:04:09 -07:00
cflags-$(CONFIG_MK7) += -march=athlon
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8,-march=athlon)
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:07 -07:00
cflags-$(CONFIG_MCRUSOE) += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
[PATCH] i386: use -mcpu, not -mtune, for GCCs older than 3.4 I just noted that -mtune is used, which is only supported on recent GCCs; by reading http://gcc.gnu.org/gcc-3.4/changes.html, you see "-mcpu has been renamed to -mtune.", so for GCC < 3.4 we're not using any specific tuning in the appropriate cases. However -mcpu is deprecated, so use -mtune when possible. This was introduced by commit e9d4dce954a60dc23dd1d967766ca2347b780e54 of the old tree (between 2.6.10-rc3 and 2.6.10) by Linus Torvalds, to remove the use of -march, since that could trigger gcc using SSE on its own. But no attention was used about using -mcpu vs. -mtune. And btw, the old 2.6.4 code (for instance) was: cflags-$(CONFIG_MPENTIUMII) += $(call check_gcc,-march=pentium2,-march=i686) cflags-$(CONFIG_MPENTIUMIII) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUMM) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUM4) += $(call check_gcc,-march=pentium4,-march=i686) Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:09 -07:00
cflags-$(CONFIG_MEFFICEON) += -march=i686 $(call tune,pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:07 -07:00
cflags-$(CONFIG_MWINCHIPC6) += $(call cc-option,-march=winchip-c6,-march=i586)
cflags-$(CONFIG_MWINCHIP2) += $(call cc-option,-march=winchip2,-march=i586)
cflags-$(CONFIG_MWINCHIP3D) += $(call cc-option,-march=winchip2,-march=i586)
cflags-$(CONFIG_MCYRIXIII) += $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
cflags-$(CONFIG_MVIAC3_2) += $(call cc-option,-march=c3-2,-march=i686)
[PATCH] i386: Add an option for the VIA C7 which sets appropriate L1 cache The VIA C7 is a 686 (with TSC) that supports MMX, SSE and SSE2, it also has a cache line length of 64 according to http://www.digit-life.com/articles2/cpu/rmma-via-c7.html. This patch sets gcc to -march=686 and select s the correct cache shift. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 10:27:05 -07:00
cflags-$(CONFIG_MVIAC7) += -march=i686
[PATCH] i386: Fix usage of -mtune when X86_GENERIC=y or CONFIG_MCORE2=y Hi! I sent this simple patch to lkml about two weeks ago and also cc'ed to Linus, but seems that the patch got ignored. I decided to write to you, because you have modified the relevant file most recently. Below is a copy of the mail that is also available at <http://lkml.org/lkml/2007/2/28/230>. Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 10:27:06 -07:00
cflags-$(CONFIG_MCORE2) += -march=i686 $(call tune,core2)
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:07 -07:00
# AMD Elan support
cflags-$(CONFIG_X86_ELAN) += -march=i486
# Geode GX1 support
[PATCH] remove gcc-2 checks Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:04:09 -07:00
cflags-$(CONFIG_MGEODEGX1) += -march=pentium-mmx
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:00:07 -07:00
[PATCH] x86-64: Use -mtune=generic for generic kernels The upcomming gcc 4.2 got a new option -mtune=generic to tune code for both common AMD and Intel CPUs. Use this option when available for generic kernels. On x86-64 it is used with CONFIG_GENERIC_CPU. On i386 it is enabled with CONFIG_X86_GENERIC. It won't affect the base line CPU support in any ways and also not the minimum supported CPU. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:29:06 -07:00
# add at the end to overwrite eventual tuning options from earlier
# cpu entries
[PATCH] i386: Fix usage of -mtune when X86_GENERIC=y or CONFIG_MCORE2=y Hi! I sent this simple patch to lkml about two weeks ago and also cc'ed to Linus, but seems that the patch got ignored. I decided to write to you, because you have modified the relevant file most recently. Below is a copy of the mail that is also available at <http://lkml.org/lkml/2007/2/28/230>. Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 10:27:06 -07:00
cflags-$(CONFIG_X86_GENERIC) += $(call tune,generic,$(call tune,i686))
[PATCH] x86-64: Use -mtune=generic for generic kernels The upcomming gcc 4.2 got a new option -mtune=generic to tune code for both common AMD and Intel CPUs. Use this option when available for generic kernels. On x86-64 it is used with CONFIG_GENERIC_CPU. On i386 it is enabled with CONFIG_X86_GENERIC. It won't affect the base line CPU support in any ways and also not the minimum supported CPU. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:29:06 -07:00
Copy Permalink