1
linux/drivers/md/linear.c

384 lines
9.2 KiB
C
Raw Normal View History

/*
linear.c : Multiple Devices driver for Linux
Copyright (C) 1994-96 Marc ZYNGIER
<zyngier@ufr-info-p7.ibp.fr> or
<maz@gloups.fdn.fr>
Linear mode management functions.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
You should have received a copy of the GNU General Public License
(for example /usr/src/linux/COPYING); if not, write to the Free
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/blkdev.h>
#include <linux/raid/md_u.h>
#include <linux/seq_file.h>
#include "md.h"
#include "linear.h"
/*
* find which device holds a particular offset
*/
static inline dev_info_t *which_dev(mddev_t *mddev, sector_t sector)
{
int lo, mid, hi;
linear_conf_t *conf;
lo = 0;
hi = mddev->raid_disks - 1;
conf = rcu_dereference(mddev->private);
/*
* Binary Search
*/
while (hi > lo) {
mid = (hi + lo) / 2;
if (sector < conf->disks[mid].end_sector)
hi = mid;
else
lo = mid + 1;
}
return conf->disks + lo;
}
/**
* linear_mergeable_bvec -- tell bio layer if two requests can be merged
* @q: request queue
* @bvm: properties of new bio
* @biovec: the request that could be merged to it.
*
* Return amount of bytes we can take at this offset
*/
static int linear_mergeable_bvec(struct request_queue *q,
struct bvec_merge_data *bvm,
struct bio_vec *biovec)
{
mddev_t *mddev = q->queuedata;
dev_info_t *dev0;
unsigned long maxsectors, bio_sectors = bvm->bi_size >> 9;
sector_t sector = bvm->bi_sector + get_start_sect(bvm->bi_bdev);
rcu_read_lock();
dev0 = which_dev(mddev, sector);
maxsectors = dev0->end_sector - sector;
rcu_read_unlock();
if (maxsectors < bio_sectors)
maxsectors = 0;
else
maxsectors -= bio_sectors;
if (maxsectors <= (PAGE_SIZE >> 9 ) && bio_sectors == 0)
return biovec->bv_len;
/* The bytes available at this offset could be really big,
* so we cap at 2^31 to avoid overflow */
if (maxsectors > (1 << (31-9)))
return 1<<31;
return maxsectors << 9;
}
static void linear_unplug(struct request_queue *q)
{
mddev_t *mddev = q->queuedata;
linear_conf_t *conf;
int i;
rcu_read_lock();
conf = rcu_dereference(mddev->private);
for (i=0; i < mddev->raid_disks; i++) {
struct request_queue *r_queue = bdev_get_queue(conf->disks[i].rdev->bdev);
blk_unplug(r_queue);
}
rcu_read_unlock();
}
static int linear_congested(void *data, int bits)
{
mddev_t *mddev = data;
linear_conf_t *conf;
int i, ret = 0;
if (mddev_congested(mddev, bits))
return 1;
rcu_read_lock();
conf = rcu_dereference(mddev->private);
for (i = 0; i < mddev->raid_disks && !ret ; i++) {
struct request_queue *q = bdev_get_queue(conf->disks[i].rdev->bdev);
ret |= bdi_congested(&q->backing_dev_info, bits);
}
rcu_read_unlock();
return ret;
}
static sector_t linear_size(mddev_t *mddev, sector_t sectors, int raid_disks)
{
linear_conf_t *conf;
sector_t array_sectors;
rcu_read_lock();
conf = rcu_dereference(mddev->private);
WARN_ONCE(sectors || raid_disks,
"%s does not support generic reshape\n", __func__);
array_sectors = conf->array_sectors;
rcu_read_unlock();
return array_sectors;
}
static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
{
linear_conf_t *conf;
mdk_rdev_t *rdev;
int i, cnt;
conf = kzalloc (sizeof (*conf) + raid_disks*sizeof(dev_info_t),
GFP_KERNEL);
if (!conf)
return NULL;
cnt = 0;
conf->array_sectors = 0;
list_for_each_entry(rdev, &mddev->disks, same_set) {
int j = rdev->raid_disk;
dev_info_t *disk = conf->disks + j;
sector_t sectors;
if (j < 0 || j >= raid_disks || disk->rdev) {
printk("linear: disk numbering problem. Aborting!\n");
goto out;
}
disk->rdev = rdev;
if (mddev->chunk_sectors) {
sectors = rdev->sectors;
sector_div(sectors, mddev->chunk_sectors);
rdev->sectors = sectors * mddev->chunk_sectors;
}
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit max_segments to 1 lying within
* a single page.
*/
if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
blk_queue_max_segments(mddev->queue, 1);
blk_queue_segment_boundary(mddev->queue,
PAGE_CACHE_SIZE - 1);
}
conf->array_sectors += rdev->sectors;
cnt++;
}
if (cnt != raid_disks) {
printk("linear: not enough drives present. Aborting!\n");
goto out;
}
/*
* Here we calculate the device offsets.
*/
conf->disks[0].end_sector = conf->disks[0].rdev->sectors;
for (i = 1; i < raid_disks; i++)
conf->disks[i].end_sector =
conf->disks[i-1].end_sector +
conf->disks[i].rdev->sectors;
return conf;
out:
kfree(conf);
return NULL;
}
static int linear_run (mddev_t *mddev)
{
linear_conf_t *conf;
if (md_check_no_bitmap(mddev))
return -EINVAL;
mddev->queue->queue_lock = &mddev->queue->__queue_lock;
conf = linear_conf(mddev, mddev->raid_disks);
if (!conf)
return 1;
mddev->private = conf;
md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
blk_queue_merge_bvec(mddev->queue, linear_mergeable_bvec);
mddev->queue->unplug_fn = linear_unplug;
mddev->queue->backing_dev_info.congested_fn = linear_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
md_integrity_register(mddev);
return 0;
}
static void free_conf(struct rcu_head *head)
{
linear_conf_t *conf = container_of(head, linear_conf_t, rcu);
kfree(conf);
}
static int linear_add(mddev_t *mddev, mdk_rdev_t *rdev)
{
/* Adding a drive to a linear array allows the array to grow.
* It is permitted if the new drive has a matching superblock
* already on it, with raid_disk equal to raid_disks.
* It is achieved by creating a new linear_private_data structure
* and swapping it in in-place of the current one.
* The current one is never freed until the array is stopped.
* This avoids races.
*/
linear_conf_t *newconf, *oldconf;
if (rdev->saved_raid_disk != mddev->raid_disks)
return -EINVAL;
rdev->raid_disk = rdev->saved_raid_disk;
newconf = linear_conf(mddev,mddev->raid_disks+1);
if (!newconf)
return -ENOMEM;
oldconf = rcu_dereference(mddev->private);
mddev->raid_disks++;
rcu_assign_pointer(mddev->private, newconf);
md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
set_capacity(mddev->gendisk, mddev->array_sectors);
revalidate_disk(mddev->gendisk);
call_rcu(&oldconf->rcu, free_conf);
return 0;
}
static int linear_stop (mddev_t *mddev)
{
linear_conf_t *conf = mddev->private;
/*
* We do not require rcu protection here since
* we hold reconfig_mutex for both linear_add and
* linear_stop, so they cannot race.
* We should make sure any old 'conf's are properly
* freed though.
*/
rcu_barrier();
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
kfree(conf);
mddev->private = NULL;
return 0;
}
static int linear_make_request (mddev_t *mddev, struct bio *bio)
{
dev_info_t *tmp_dev;
sector_t start_sector;
if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER))) {
md: support barrier requests on all personalities. Previously barriers were only supported on RAID1. This is because other levels requires synchronisation across all devices and so needed a different approach. Here is that approach. When a barrier arrives, we send a zero-length barrier to every active device. When that completes - and if the original request was not empty - we submit the barrier request itself (with the barrier flag cleared) and then submit a fresh load of zero length barriers. The barrier request itself is asynchronous, but any subsequent request will block until the barrier completes. The reason for clearing the barrier flag is that a barrier request is allowed to fail. If we pass a non-empty barrier through a striping raid level it is conceivable that part of it could succeed and part could fail. That would be way too hard to deal with. So if the first run of zero length barriers succeed, we assume all is sufficiently well that we send the request and ignore errors in the second run of barriers. RAID5 needs extra care as write requests may not have been submitted to the underlying devices yet. So we flush the stripe cache before proceeding with the barrier. Note that the second set of zero-length barriers are submitted immediately after the original request is submitted. Thus when a personality finds mddev->barrier to be set during make_request, it should not return from make_request until the corresponding per-device request(s) have been queued. That will be done in later patches. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-12-13 18:49:49 -07:00
md_barrier_request(mddev, bio);
return 0;
}
rcu_read_lock();
tmp_dev = which_dev(mddev, bio->bi_sector);
start_sector = tmp_dev->end_sector - tmp_dev->rdev->sectors;
if (unlikely(bio->bi_sector >= (tmp_dev->end_sector)
|| (bio->bi_sector < start_sector))) {
char b[BDEVNAME_SIZE];
printk("linear_make_request: Sector %llu out of bounds on "
"dev %s: %llu sectors, offset %llu\n",
(unsigned long long)bio->bi_sector,
bdevname(tmp_dev->rdev->bdev, b),
(unsigned long long)tmp_dev->rdev->sectors,
(unsigned long long)start_sector);
rcu_read_unlock();
bio_io_error(bio);
return 0;
}
if (unlikely(bio->bi_sector + (bio->bi_size >> 9) >
tmp_dev->end_sector)) {
/* This bio crosses a device boundary, so we have to
* split it.
*/
struct bio_pair *bp;
sector_t end_sector = tmp_dev->end_sector;
rcu_read_unlock();
bp = bio_split(bio, end_sector - bio->bi_sector);
if (linear_make_request(mddev, &bp->bio1))
generic_make_request(&bp->bio1);
if (linear_make_request(mddev, &bp->bio2))
generic_make_request(&bp->bio2);
bio_pair_release(bp);
return 0;
}
bio->bi_bdev = tmp_dev->rdev->bdev;
bio->bi_sector = bio->bi_sector - start_sector
+ tmp_dev->rdev->data_offset;
rcu_read_unlock();
return 1;
}
static void linear_status (struct seq_file *seq, mddev_t *mddev)
{
seq_printf(seq, " %dk rounding", mddev->chunk_sectors / 2);
}
static struct mdk_personality linear_personality =
{
.name = "linear",
.level = LEVEL_LINEAR,
.owner = THIS_MODULE,
.make_request = linear_make_request,
.run = linear_run,
.stop = linear_stop,
.status = linear_status,
.hot_add_disk = linear_add,
.size = linear_size,
};
static int __init linear_init (void)
{
return register_md_personality (&linear_personality);
}
static void linear_exit (void)
{
unregister_md_personality (&linear_personality);
}
module_init(linear_init);
module_exit(linear_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Linear device concatenation personality for MD");
MODULE_ALIAS("md-personality-1"); /* LINEAR - deprecated*/
MODULE_ALIAS("md-linear");
MODULE_ALIAS("md-level--1");