2005-10-31 07:25:02 -07:00
|
|
|
/*
|
|
|
|
* linux/arch/arm/mach-realview/core.c
|
|
|
|
*
|
|
|
|
* Copyright (C) 1999 - 2003 ARM Limited
|
|
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
#include <linux/init.h>
|
2005-10-31 09:57:06 -07:00
|
|
|
#include <linux/platform_device.h>
|
2005-10-31 07:25:02 -07:00
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <linux/sysdev.h>
|
|
|
|
#include <linux/interrupt.h>
|
2006-01-07 06:52:45 -07:00
|
|
|
#include <linux/amba/bus.h>
|
|
|
|
#include <linux/amba/clcd.h>
|
2005-10-31 07:25:02 -07:00
|
|
|
|
|
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/hardware.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/leds.h>
|
|
|
|
#include <asm/hardware/arm_timer.h>
|
|
|
|
#include <asm/hardware/icst307.h>
|
|
|
|
|
|
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <asm/mach/time.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <asm/mach/mmc.h>
|
|
|
|
|
|
|
|
#include <asm/hardware/gic.h>
|
|
|
|
|
|
|
|
#include "core.h"
|
|
|
|
#include "clock.h"
|
|
|
|
|
|
|
|
#define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This is the RealView sched_clock implementation. This has
|
|
|
|
* a resolution of 41.7ns, and a maximum value of about 179s.
|
|
|
|
*/
|
|
|
|
unsigned long long sched_clock(void)
|
|
|
|
{
|
|
|
|
unsigned long long v;
|
|
|
|
|
|
|
|
v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
|
|
|
|
do_div(v, 3);
|
|
|
|
|
|
|
|
return v;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
|
|
|
|
|
|
|
|
static int realview_flash_init(void)
|
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = __raw_readl(REALVIEW_FLASHCTRL);
|
|
|
|
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
|
|
|
|
__raw_writel(val, REALVIEW_FLASHCTRL);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void realview_flash_exit(void)
|
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = __raw_readl(REALVIEW_FLASHCTRL);
|
|
|
|
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
|
|
|
|
__raw_writel(val, REALVIEW_FLASHCTRL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void realview_flash_set_vpp(int on)
|
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = __raw_readl(REALVIEW_FLASHCTRL);
|
|
|
|
if (on)
|
|
|
|
val |= REALVIEW_FLASHPROG_FLVPPEN;
|
|
|
|
else
|
|
|
|
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
|
|
|
|
__raw_writel(val, REALVIEW_FLASHCTRL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct flash_platform_data realview_flash_data = {
|
|
|
|
.map_name = "cfi_probe",
|
|
|
|
.width = 4,
|
|
|
|
.init = realview_flash_init,
|
|
|
|
.exit = realview_flash_exit,
|
|
|
|
.set_vpp = realview_flash_set_vpp,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct resource realview_flash_resource = {
|
|
|
|
.start = REALVIEW_FLASH_BASE,
|
|
|
|
.end = REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE,
|
|
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct platform_device realview_flash_device = {
|
|
|
|
.name = "armflash",
|
|
|
|
.id = 0,
|
|
|
|
.dev = {
|
|
|
|
.platform_data = &realview_flash_data,
|
|
|
|
},
|
|
|
|
.num_resources = 1,
|
|
|
|
.resource = &realview_flash_resource,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct resource realview_smc91x_resources[] = {
|
|
|
|
[0] = {
|
|
|
|
.start = REALVIEW_ETH_BASE,
|
|
|
|
.end = REALVIEW_ETH_BASE + SZ_64K - 1,
|
|
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
},
|
|
|
|
[1] = {
|
|
|
|
.start = IRQ_ETH,
|
|
|
|
.end = IRQ_ETH,
|
|
|
|
.flags = IORESOURCE_IRQ,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
struct platform_device realview_smc91x_device = {
|
|
|
|
.name = "smc91x",
|
|
|
|
.id = 0,
|
|
|
|
.num_resources = ARRAY_SIZE(realview_smc91x_resources),
|
|
|
|
.resource = realview_smc91x_resources,
|
|
|
|
};
|
|
|
|
|
2006-12-10 13:21:32 -07:00
|
|
|
static struct resource realview_i2c_resource = {
|
|
|
|
.start = REALVIEW_I2C_BASE,
|
|
|
|
.end = REALVIEW_I2C_BASE + SZ_4K - 1,
|
|
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct platform_device realview_i2c_device = {
|
|
|
|
.name = "versatile-i2c",
|
|
|
|
.id = -1,
|
|
|
|
.num_resources = 1,
|
|
|
|
.resource = &realview_i2c_resource,
|
|
|
|
};
|
|
|
|
|
2005-10-31 07:25:02 -07:00
|
|
|
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
|
|
|
|
|
|
|
|
static unsigned int realview_mmc_status(struct device *dev)
|
|
|
|
{
|
|
|
|
struct amba_device *adev = container_of(dev, struct amba_device, dev);
|
|
|
|
u32 mask;
|
|
|
|
|
|
|
|
if (adev->res.start == REALVIEW_MMCI0_BASE)
|
|
|
|
mask = 1;
|
|
|
|
else
|
|
|
|
mask = 2;
|
|
|
|
|
|
|
|
return readl(REALVIEW_SYSMCI) & mask;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct mmc_platform_data realview_mmc0_plat_data = {
|
|
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
|
|
.status = realview_mmc_status,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct mmc_platform_data realview_mmc1_plat_data = {
|
|
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
|
|
.status = realview_mmc_status,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Clock handling
|
|
|
|
*/
|
|
|
|
static const struct icst307_params realview_oscvco_params = {
|
|
|
|
.ref = 24000,
|
|
|
|
.vco_max = 200000,
|
|
|
|
.vd_min = 4 + 8,
|
|
|
|
.vd_max = 511 + 8,
|
|
|
|
.rd_min = 1 + 2,
|
|
|
|
.rd_max = 127 + 2,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
|
|
|
|
{
|
|
|
|
void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
|
2006-02-08 14:19:39 -07:00
|
|
|
void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
|
2005-10-31 07:25:02 -07:00
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = readl(sys_osc) & ~0x7ffff;
|
|
|
|
val |= vco.v | (vco.r << 9) | (vco.s << 16);
|
|
|
|
|
|
|
|
writel(0xa05f, sys_lock);
|
|
|
|
writel(val, sys_osc);
|
|
|
|
writel(0, sys_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct clk realview_clcd_clk = {
|
|
|
|
.name = "CLCDCLK",
|
|
|
|
.params = &realview_oscvco_params,
|
|
|
|
.setvco = realview_oscvco_set,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* CLCD support.
|
|
|
|
*/
|
|
|
|
#define SYS_CLCD_NLCDIOON (1 << 2)
|
|
|
|
#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
|
|
|
|
#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
|
|
|
|
#define SYS_CLCD_ID_MASK (0x1f << 8)
|
|
|
|
#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
|
|
|
|
#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
|
|
|
|
#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
|
|
|
|
#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
|
|
|
|
#define SYS_CLCD_ID_VGA (0x1f << 8)
|
|
|
|
|
|
|
|
static struct clcd_panel vga = {
|
|
|
|
.mode = {
|
|
|
|
.name = "VGA",
|
|
|
|
.refresh = 60,
|
|
|
|
.xres = 640,
|
|
|
|
.yres = 480,
|
|
|
|
.pixclock = 39721,
|
|
|
|
.left_margin = 40,
|
|
|
|
.right_margin = 24,
|
|
|
|
.upper_margin = 32,
|
|
|
|
.lower_margin = 11,
|
|
|
|
.hsync_len = 96,
|
|
|
|
.vsync_len = 2,
|
|
|
|
.sync = 0,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
|
|
},
|
|
|
|
.width = -1,
|
|
|
|
.height = -1,
|
|
|
|
.tim2 = TIM2_BCD | TIM2_IPC,
|
|
|
|
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
|
|
|
|
.bpp = 16,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct clcd_panel sanyo_3_8_in = {
|
|
|
|
.mode = {
|
|
|
|
.name = "Sanyo QVGA",
|
|
|
|
.refresh = 116,
|
|
|
|
.xres = 320,
|
|
|
|
.yres = 240,
|
|
|
|
.pixclock = 100000,
|
|
|
|
.left_margin = 6,
|
|
|
|
.right_margin = 6,
|
|
|
|
.upper_margin = 5,
|
|
|
|
.lower_margin = 5,
|
|
|
|
.hsync_len = 6,
|
|
|
|
.vsync_len = 6,
|
|
|
|
.sync = 0,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
|
|
},
|
|
|
|
.width = -1,
|
|
|
|
.height = -1,
|
|
|
|
.tim2 = TIM2_BCD,
|
|
|
|
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
|
|
|
|
.bpp = 16,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct clcd_panel sanyo_2_5_in = {
|
|
|
|
.mode = {
|
|
|
|
.name = "Sanyo QVGA Portrait",
|
|
|
|
.refresh = 116,
|
|
|
|
.xres = 240,
|
|
|
|
.yres = 320,
|
|
|
|
.pixclock = 100000,
|
|
|
|
.left_margin = 20,
|
|
|
|
.right_margin = 10,
|
|
|
|
.upper_margin = 2,
|
|
|
|
.lower_margin = 2,
|
|
|
|
.hsync_len = 10,
|
|
|
|
.vsync_len = 2,
|
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
|
|
},
|
|
|
|
.width = -1,
|
|
|
|
.height = -1,
|
|
|
|
.tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC,
|
|
|
|
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
|
|
|
|
.bpp = 16,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct clcd_panel epson_2_2_in = {
|
|
|
|
.mode = {
|
|
|
|
.name = "Epson QCIF",
|
|
|
|
.refresh = 390,
|
|
|
|
.xres = 176,
|
|
|
|
.yres = 220,
|
|
|
|
.pixclock = 62500,
|
|
|
|
.left_margin = 3,
|
|
|
|
.right_margin = 2,
|
|
|
|
.upper_margin = 1,
|
|
|
|
.lower_margin = 0,
|
|
|
|
.hsync_len = 3,
|
|
|
|
.vsync_len = 2,
|
|
|
|
.sync = 0,
|
|
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
|
|
},
|
|
|
|
.width = -1,
|
|
|
|
.height = -1,
|
|
|
|
.tim2 = TIM2_BCD | TIM2_IPC,
|
|
|
|
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
|
|
|
|
.bpp = 16,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Detect which LCD panel is connected, and return the appropriate
|
|
|
|
* clcd_panel structure. Note: we do not have any information on
|
|
|
|
* the required timings for the 8.4in panel, so we presently assume
|
|
|
|
* VGA timings.
|
|
|
|
*/
|
|
|
|
static struct clcd_panel *realview_clcd_panel(void)
|
|
|
|
{
|
|
|
|
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
|
|
|
|
struct clcd_panel *panel = &vga;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
|
|
|
|
if (val == SYS_CLCD_ID_SANYO_3_8)
|
|
|
|
panel = &sanyo_3_8_in;
|
|
|
|
else if (val == SYS_CLCD_ID_SANYO_2_5)
|
|
|
|
panel = &sanyo_2_5_in;
|
|
|
|
else if (val == SYS_CLCD_ID_EPSON_2_2)
|
|
|
|
panel = &epson_2_2_in;
|
|
|
|
else if (val == SYS_CLCD_ID_VGA)
|
|
|
|
panel = &vga;
|
|
|
|
else {
|
|
|
|
printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
|
|
|
|
val);
|
|
|
|
panel = &vga;
|
|
|
|
}
|
|
|
|
|
|
|
|
return panel;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Disable all display connectors on the interface module.
|
|
|
|
*/
|
|
|
|
static void realview_clcd_disable(struct clcd_fb *fb)
|
|
|
|
{
|
|
|
|
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = readl(sys_clcd);
|
|
|
|
val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
|
|
|
|
writel(val, sys_clcd);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Enable the relevant connector on the interface module.
|
|
|
|
*/
|
|
|
|
static void realview_clcd_enable(struct clcd_fb *fb)
|
|
|
|
{
|
|
|
|
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
/*
|
2006-03-16 07:10:20 -07:00
|
|
|
* Enable the PSUs
|
2005-10-31 07:25:02 -07:00
|
|
|
*/
|
2006-03-16 07:10:20 -07:00
|
|
|
val = readl(sys_clcd);
|
2005-10-31 07:25:02 -07:00
|
|
|
val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
|
|
|
|
writel(val, sys_clcd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long framesize = SZ_1M;
|
|
|
|
|
|
|
|
static int realview_clcd_setup(struct clcd_fb *fb)
|
|
|
|
{
|
|
|
|
dma_addr_t dma;
|
|
|
|
|
|
|
|
fb->panel = realview_clcd_panel();
|
|
|
|
|
|
|
|
fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
|
|
|
|
&dma, GFP_KERNEL);
|
|
|
|
if (!fb->fb.screen_base) {
|
|
|
|
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
fb->fb.fix.smem_start = dma;
|
|
|
|
fb->fb.fix.smem_len = framesize;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
return dma_mmap_writecombine(&fb->dev->dev, vma,
|
|
|
|
fb->fb.screen_base,
|
|
|
|
fb->fb.fix.smem_start,
|
|
|
|
fb->fb.fix.smem_len);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void realview_clcd_remove(struct clcd_fb *fb)
|
|
|
|
{
|
|
|
|
dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
|
|
|
|
fb->fb.screen_base, fb->fb.fix.smem_start);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct clcd_board clcd_plat_data = {
|
|
|
|
.name = "RealView",
|
|
|
|
.check = clcdfb_check,
|
|
|
|
.decode = clcdfb_decode,
|
|
|
|
.disable = realview_clcd_disable,
|
|
|
|
.enable = realview_clcd_enable,
|
|
|
|
.setup = realview_clcd_setup,
|
|
|
|
.mmap = realview_clcd_mmap,
|
|
|
|
.remove = realview_clcd_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
#ifdef CONFIG_LEDS
|
|
|
|
#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
|
|
|
|
|
|
|
|
void realview_leds_event(led_event_t ledevt)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
val = readl(VA_LEDS_BASE);
|
|
|
|
|
|
|
|
switch (ledevt) {
|
|
|
|
case led_idle_start:
|
|
|
|
val = val & ~REALVIEW_SYS_LED0;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case led_idle_end:
|
|
|
|
val = val | REALVIEW_SYS_LED0;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case led_timer:
|
|
|
|
val = val ^ REALVIEW_SYS_LED1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case led_halted:
|
|
|
|
val = 0;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
writel(val, VA_LEDS_BASE);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_LEDS */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Where is the timer (VA)?
|
|
|
|
*/
|
|
|
|
#define TIMER0_VA_BASE __io_address(REALVIEW_TIMER0_1_BASE)
|
|
|
|
#define TIMER1_VA_BASE (__io_address(REALVIEW_TIMER0_1_BASE) + 0x20)
|
|
|
|
#define TIMER2_VA_BASE __io_address(REALVIEW_TIMER2_3_BASE)
|
|
|
|
#define TIMER3_VA_BASE (__io_address(REALVIEW_TIMER2_3_BASE) + 0x20)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* How long is the timer interval?
|
|
|
|
*/
|
|
|
|
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
|
|
|
|
#if TIMER_INTERVAL >= 0x100000
|
|
|
|
#define TIMER_RELOAD (TIMER_INTERVAL >> 8)
|
|
|
|
#define TIMER_DIVISOR (TIMER_CTRL_DIV256)
|
|
|
|
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
|
|
|
|
#elif TIMER_INTERVAL >= 0x10000
|
|
|
|
#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
|
|
|
|
#define TIMER_DIVISOR (TIMER_CTRL_DIV16)
|
|
|
|
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
|
|
|
|
#else
|
|
|
|
#define TIMER_RELOAD (TIMER_INTERVAL)
|
|
|
|
#define TIMER_DIVISOR (TIMER_CTRL_DIV1)
|
|
|
|
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Returns number of ms since last clock interrupt. Note that interrupts
|
|
|
|
* will have been disabled by do_gettimeoffset()
|
|
|
|
*/
|
|
|
|
static unsigned long realview_gettimeoffset(void)
|
|
|
|
{
|
|
|
|
unsigned long ticks1, ticks2, status;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get the current number of ticks. Note that there is a race
|
|
|
|
* condition between us reading the timer and checking for
|
|
|
|
* an interrupt. We get around this by ensuring that the
|
|
|
|
* counter has not reloaded between our two reads.
|
|
|
|
*/
|
|
|
|
ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
|
|
|
|
do {
|
|
|
|
ticks1 = ticks2;
|
|
|
|
status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET)
|
|
|
|
+ ((IRQ_TIMERINT0_1 >> 5) << 2));
|
|
|
|
ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
|
|
|
|
} while (ticks2 > ticks1);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Number of ticks since last interrupt.
|
|
|
|
*/
|
|
|
|
ticks1 = TIMER_RELOAD - ticks2;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Interrupt pending? If so, we've reloaded once already.
|
|
|
|
*
|
|
|
|
* FIXME: Need to check this is effectively timer 0 that expires
|
|
|
|
*/
|
|
|
|
if (status & IRQMASK_TIMERINT0_1)
|
|
|
|
ticks1 += TIMER_RELOAD;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Convert the ticks to usecs
|
|
|
|
*/
|
|
|
|
return TICKS2USECS(ticks1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IRQ handler for the timer
|
|
|
|
*/
|
2006-10-06 10:53:39 -07:00
|
|
|
static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
|
2005-10-31 07:25:02 -07:00
|
|
|
{
|
|
|
|
// ...clear the interrupt
|
|
|
|
writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
|
|
|
|
|
2006-10-06 10:53:39 -07:00
|
|
|
timer_tick();
|
2005-10-31 07:25:02 -07:00
|
|
|
|
2005-11-09 03:50:29 -07:00
|
|
|
#if defined(CONFIG_SMP) && !defined(CONFIG_LOCAL_TIMERS)
|
2005-11-08 03:40:10 -07:00
|
|
|
smp_send_timer();
|
2006-10-06 10:53:39 -07:00
|
|
|
update_process_times(user_mode(get_irq_regs()));
|
2005-11-08 03:40:10 -07:00
|
|
|
#endif
|
|
|
|
|
2005-10-31 07:25:02 -07:00
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct irqaction realview_timer_irq = {
|
|
|
|
.name = "RealView Timer Tick",
|
2007-05-08 00:35:39 -07:00
|
|
|
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
2005-10-31 07:25:02 -07:00
|
|
|
.handler = realview_timer_interrupt,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set up timer interrupt, and return the current time in seconds.
|
|
|
|
*/
|
|
|
|
static void __init realview_timer_init(void)
|
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* set clock frequency:
|
|
|
|
* REALVIEW_REFCLK is 32KHz
|
|
|
|
* REALVIEW_TIMCLK is 1MHz
|
|
|
|
*/
|
|
|
|
val = readl(__io_address(REALVIEW_SCTL_BASE));
|
|
|
|
writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
|
|
|
|
(REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) |
|
|
|
|
(REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
|
|
|
|
(REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
|
|
|
|
__io_address(REALVIEW_SCTL_BASE));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialise to a known state (all timers off)
|
|
|
|
*/
|
|
|
|
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
|
|
|
|
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
|
|
|
|
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
|
|
|
|
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
|
|
|
|
|
|
|
|
writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
|
|
|
|
writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
|
|
|
|
writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
|
|
|
|
TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Make irqs happen for the system timer
|
|
|
|
*/
|
|
|
|
setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct sys_timer realview_timer = {
|
|
|
|
.init = realview_timer_init,
|
|
|
|
.offset = realview_gettimeoffset,
|
|
|
|
};
|