2023-09-11 02:25:15 -07:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
#include <linux/memcontrol.h>
|
|
|
|
#include <linux/rwsem.h>
|
|
|
|
#include <linux/shrinker.h>
|
mm: shrinker: make global slab shrink lockless
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:41 -07:00
|
|
|
#include <linux/rculist.h>
|
2023-09-11 02:25:15 -07:00
|
|
|
#include <trace/events/vmscan.h>
|
|
|
|
|
|
|
|
#include "internal.h"
|
|
|
|
|
|
|
|
LIST_HEAD(shrinker_list);
|
2023-09-11 02:44:44 -07:00
|
|
|
DEFINE_MUTEX(shrinker_mutex);
|
2023-09-11 02:25:15 -07:00
|
|
|
|
|
|
|
#ifdef CONFIG_MEMCG
|
|
|
|
static int shrinker_nr_max;
|
|
|
|
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
static inline int shrinker_unit_size(int nr_items)
|
2023-09-11 02:25:15 -07:00
|
|
|
{
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
return (DIV_ROUND_UP(nr_items, SHRINKER_UNIT_BITS) * sizeof(struct shrinker_info_unit *));
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
|
|
|
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
static inline void shrinker_unit_free(struct shrinker_info *info, int start)
|
2023-09-11 02:25:15 -07:00
|
|
|
{
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
struct shrinker_info_unit **unit;
|
|
|
|
int nr, i;
|
|
|
|
|
|
|
|
if (!info)
|
|
|
|
return;
|
|
|
|
|
|
|
|
unit = info->unit;
|
|
|
|
nr = DIV_ROUND_UP(info->map_nr_max, SHRINKER_UNIT_BITS);
|
|
|
|
|
|
|
|
for (i = start; i < nr; i++) {
|
|
|
|
if (!unit[i])
|
|
|
|
break;
|
|
|
|
|
|
|
|
kfree(unit[i]);
|
|
|
|
unit[i] = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int shrinker_unit_alloc(struct shrinker_info *new,
|
|
|
|
struct shrinker_info *old, int nid)
|
|
|
|
{
|
|
|
|
struct shrinker_info_unit *unit;
|
|
|
|
int nr = DIV_ROUND_UP(new->map_nr_max, SHRINKER_UNIT_BITS);
|
|
|
|
int start = old ? DIV_ROUND_UP(old->map_nr_max, SHRINKER_UNIT_BITS) : 0;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = start; i < nr; i++) {
|
|
|
|
unit = kzalloc_node(sizeof(*unit), GFP_KERNEL, nid);
|
|
|
|
if (!unit) {
|
|
|
|
shrinker_unit_free(new, start);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
new->unit[i] = unit;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
void free_shrinker_info(struct mem_cgroup *memcg)
|
|
|
|
{
|
|
|
|
struct mem_cgroup_per_node *pn;
|
|
|
|
struct shrinker_info *info;
|
|
|
|
int nid;
|
|
|
|
|
|
|
|
for_each_node(nid) {
|
|
|
|
pn = memcg->nodeinfo[nid];
|
|
|
|
info = rcu_dereference_protected(pn->shrinker_info, true);
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
shrinker_unit_free(info, 0);
|
2023-09-11 02:25:15 -07:00
|
|
|
kvfree(info);
|
|
|
|
rcu_assign_pointer(pn->shrinker_info, NULL);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int alloc_shrinker_info(struct mem_cgroup *memcg)
|
|
|
|
{
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
int nid, ret = 0;
|
|
|
|
int array_size = 0;
|
2023-09-11 02:25:15 -07:00
|
|
|
|
2023-09-11 02:44:44 -07:00
|
|
|
mutex_lock(&shrinker_mutex);
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
array_size = shrinker_unit_size(shrinker_nr_max);
|
2023-09-11 02:25:15 -07:00
|
|
|
for_each_node(nid) {
|
2024-10-24 23:09:42 -07:00
|
|
|
struct shrinker_info *info = kvzalloc_node(sizeof(*info) + array_size,
|
|
|
|
GFP_KERNEL, nid);
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
if (!info)
|
|
|
|
goto err;
|
2023-09-11 02:25:15 -07:00
|
|
|
info->map_nr_max = shrinker_nr_max;
|
2024-10-24 23:09:42 -07:00
|
|
|
if (shrinker_unit_alloc(info, NULL, nid)) {
|
|
|
|
kvfree(info);
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
goto err;
|
2024-10-24 23:09:42 -07:00
|
|
|
}
|
2023-09-11 02:25:15 -07:00
|
|
|
rcu_assign_pointer(memcg->nodeinfo[nid]->shrinker_info, info);
|
|
|
|
}
|
2023-09-11 02:44:44 -07:00
|
|
|
mutex_unlock(&shrinker_mutex);
|
2023-09-11 02:25:15 -07:00
|
|
|
|
|
|
|
return ret;
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
|
|
|
|
err:
|
2023-09-11 02:44:44 -07:00
|
|
|
mutex_unlock(&shrinker_mutex);
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
free_shrinker_info(memcg);
|
|
|
|
return -ENOMEM;
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct shrinker_info *shrinker_info_protected(struct mem_cgroup *memcg,
|
|
|
|
int nid)
|
|
|
|
{
|
|
|
|
return rcu_dereference_protected(memcg->nodeinfo[nid]->shrinker_info,
|
2023-09-11 02:44:44 -07:00
|
|
|
lockdep_is_held(&shrinker_mutex));
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
|
|
|
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
static int expand_one_shrinker_info(struct mem_cgroup *memcg, int new_size,
|
|
|
|
int old_size, int new_nr_max)
|
2023-09-11 02:25:15 -07:00
|
|
|
{
|
|
|
|
struct shrinker_info *new, *old;
|
|
|
|
struct mem_cgroup_per_node *pn;
|
|
|
|
int nid;
|
|
|
|
|
|
|
|
for_each_node(nid) {
|
|
|
|
pn = memcg->nodeinfo[nid];
|
|
|
|
old = shrinker_info_protected(memcg, nid);
|
|
|
|
/* Not yet online memcg */
|
|
|
|
if (!old)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* Already expanded this shrinker_info */
|
|
|
|
if (new_nr_max <= old->map_nr_max)
|
|
|
|
continue;
|
|
|
|
|
2024-01-02 18:52:22 -07:00
|
|
|
new = kvzalloc_node(sizeof(*new) + new_size, GFP_KERNEL, nid);
|
2023-09-11 02:25:15 -07:00
|
|
|
if (!new)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
new->map_nr_max = new_nr_max;
|
|
|
|
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
memcpy(new->unit, old->unit, old_size);
|
|
|
|
if (shrinker_unit_alloc(new, old, nid)) {
|
|
|
|
kvfree(new);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
2023-09-11 02:25:15 -07:00
|
|
|
|
|
|
|
rcu_assign_pointer(pn->shrinker_info, new);
|
|
|
|
kvfree_rcu(old, rcu);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int expand_shrinker_info(int new_id)
|
|
|
|
{
|
|
|
|
int ret = 0;
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
int new_nr_max = round_up(new_id + 1, SHRINKER_UNIT_BITS);
|
|
|
|
int new_size, old_size = 0;
|
2023-09-11 02:25:15 -07:00
|
|
|
struct mem_cgroup *memcg;
|
|
|
|
|
|
|
|
if (!root_mem_cgroup)
|
|
|
|
goto out;
|
|
|
|
|
2023-09-11 02:44:44 -07:00
|
|
|
lockdep_assert_held(&shrinker_mutex);
|
2023-09-11 02:25:15 -07:00
|
|
|
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
new_size = shrinker_unit_size(new_nr_max);
|
|
|
|
old_size = shrinker_unit_size(shrinker_nr_max);
|
2023-09-11 02:25:15 -07:00
|
|
|
|
|
|
|
memcg = mem_cgroup_iter(NULL, NULL, NULL);
|
|
|
|
do {
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
ret = expand_one_shrinker_info(memcg, new_size, old_size,
|
2023-09-11 02:25:15 -07:00
|
|
|
new_nr_max);
|
|
|
|
if (ret) {
|
|
|
|
mem_cgroup_iter_break(NULL, memcg);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
} while ((memcg = mem_cgroup_iter(NULL, memcg, NULL)) != NULL);
|
|
|
|
out:
|
|
|
|
if (!ret)
|
|
|
|
shrinker_nr_max = new_nr_max;
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
static inline int shrinker_id_to_index(int shrinker_id)
|
|
|
|
{
|
|
|
|
return shrinker_id / SHRINKER_UNIT_BITS;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int shrinker_id_to_offset(int shrinker_id)
|
|
|
|
{
|
|
|
|
return shrinker_id % SHRINKER_UNIT_BITS;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int calc_shrinker_id(int index, int offset)
|
|
|
|
{
|
|
|
|
return index * SHRINKER_UNIT_BITS + offset;
|
|
|
|
}
|
|
|
|
|
2023-09-11 02:25:15 -07:00
|
|
|
void set_shrinker_bit(struct mem_cgroup *memcg, int nid, int shrinker_id)
|
|
|
|
{
|
|
|
|
if (shrinker_id >= 0 && memcg && !mem_cgroup_is_root(memcg)) {
|
|
|
|
struct shrinker_info *info;
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
struct shrinker_info_unit *unit;
|
2023-09-11 02:25:15 -07:00
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
info = rcu_dereference(memcg->nodeinfo[nid]->shrinker_info);
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
unit = info->unit[shrinker_id_to_index(shrinker_id)];
|
2023-09-11 02:25:15 -07:00
|
|
|
if (!WARN_ON_ONCE(shrinker_id >= info->map_nr_max)) {
|
|
|
|
/* Pairs with smp mb in shrink_slab() */
|
|
|
|
smp_mb__before_atomic();
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
set_bit(shrinker_id_to_offset(shrinker_id), unit->map);
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
|
|
|
rcu_read_unlock();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static DEFINE_IDR(shrinker_idr);
|
|
|
|
|
2023-09-11 02:44:40 -07:00
|
|
|
static int shrinker_memcg_alloc(struct shrinker *shrinker)
|
2023-09-11 02:25:15 -07:00
|
|
|
{
|
|
|
|
int id, ret = -ENOMEM;
|
|
|
|
|
|
|
|
if (mem_cgroup_disabled())
|
|
|
|
return -ENOSYS;
|
|
|
|
|
2023-09-11 02:44:44 -07:00
|
|
|
mutex_lock(&shrinker_mutex);
|
2023-09-11 02:25:15 -07:00
|
|
|
id = idr_alloc(&shrinker_idr, shrinker, 0, 0, GFP_KERNEL);
|
|
|
|
if (id < 0)
|
|
|
|
goto unlock;
|
|
|
|
|
|
|
|
if (id >= shrinker_nr_max) {
|
|
|
|
if (expand_shrinker_info(id)) {
|
|
|
|
idr_remove(&shrinker_idr, id);
|
|
|
|
goto unlock;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
shrinker->id = id;
|
|
|
|
ret = 0;
|
|
|
|
unlock:
|
2023-09-11 02:44:44 -07:00
|
|
|
mutex_unlock(&shrinker_mutex);
|
2023-09-11 02:25:15 -07:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2023-09-11 02:44:40 -07:00
|
|
|
static void shrinker_memcg_remove(struct shrinker *shrinker)
|
2023-09-11 02:25:15 -07:00
|
|
|
{
|
|
|
|
int id = shrinker->id;
|
|
|
|
|
|
|
|
BUG_ON(id < 0);
|
|
|
|
|
2023-09-11 02:44:44 -07:00
|
|
|
lockdep_assert_held(&shrinker_mutex);
|
2023-09-11 02:25:15 -07:00
|
|
|
|
|
|
|
idr_remove(&shrinker_idr, id);
|
|
|
|
}
|
|
|
|
|
|
|
|
static long xchg_nr_deferred_memcg(int nid, struct shrinker *shrinker,
|
|
|
|
struct mem_cgroup *memcg)
|
|
|
|
{
|
|
|
|
struct shrinker_info *info;
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
struct shrinker_info_unit *unit;
|
2023-09-11 02:44:42 -07:00
|
|
|
long nr_deferred;
|
2023-09-11 02:25:15 -07:00
|
|
|
|
2023-09-11 02:44:42 -07:00
|
|
|
rcu_read_lock();
|
|
|
|
info = rcu_dereference(memcg->nodeinfo[nid]->shrinker_info);
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
unit = info->unit[shrinker_id_to_index(shrinker->id)];
|
2023-09-11 02:44:42 -07:00
|
|
|
nr_deferred = atomic_long_xchg(&unit->nr_deferred[shrinker_id_to_offset(shrinker->id)], 0);
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
|
|
|
return nr_deferred;
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
static long add_nr_deferred_memcg(long nr, int nid, struct shrinker *shrinker,
|
|
|
|
struct mem_cgroup *memcg)
|
|
|
|
{
|
|
|
|
struct shrinker_info *info;
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
struct shrinker_info_unit *unit;
|
2023-09-11 02:44:42 -07:00
|
|
|
long nr_deferred;
|
2023-09-11 02:25:15 -07:00
|
|
|
|
2023-09-11 02:44:42 -07:00
|
|
|
rcu_read_lock();
|
|
|
|
info = rcu_dereference(memcg->nodeinfo[nid]->shrinker_info);
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
unit = info->unit[shrinker_id_to_index(shrinker->id)];
|
2023-09-11 02:44:42 -07:00
|
|
|
nr_deferred =
|
|
|
|
atomic_long_add_return(nr, &unit->nr_deferred[shrinker_id_to_offset(shrinker->id)]);
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
|
|
|
return nr_deferred;
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
void reparent_shrinker_deferred(struct mem_cgroup *memcg)
|
|
|
|
{
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
int nid, index, offset;
|
2023-09-11 02:25:15 -07:00
|
|
|
long nr;
|
|
|
|
struct mem_cgroup *parent;
|
|
|
|
struct shrinker_info *child_info, *parent_info;
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
struct shrinker_info_unit *child_unit, *parent_unit;
|
2023-09-11 02:25:15 -07:00
|
|
|
|
|
|
|
parent = parent_mem_cgroup(memcg);
|
|
|
|
if (!parent)
|
|
|
|
parent = root_mem_cgroup;
|
|
|
|
|
|
|
|
/* Prevent from concurrent shrinker_info expand */
|
2023-09-11 02:44:44 -07:00
|
|
|
mutex_lock(&shrinker_mutex);
|
2023-09-11 02:25:15 -07:00
|
|
|
for_each_node(nid) {
|
|
|
|
child_info = shrinker_info_protected(memcg, nid);
|
|
|
|
parent_info = shrinker_info_protected(parent, nid);
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
for (index = 0; index < shrinker_id_to_index(child_info->map_nr_max); index++) {
|
|
|
|
child_unit = child_info->unit[index];
|
|
|
|
parent_unit = parent_info->unit[index];
|
|
|
|
for (offset = 0; offset < SHRINKER_UNIT_BITS; offset++) {
|
|
|
|
nr = atomic_long_read(&child_unit->nr_deferred[offset]);
|
|
|
|
atomic_long_add(nr, &parent_unit->nr_deferred[offset]);
|
|
|
|
}
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
|
|
|
}
|
2023-09-11 02:44:44 -07:00
|
|
|
mutex_unlock(&shrinker_mutex);
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
|
|
|
#else
|
2023-09-11 02:44:40 -07:00
|
|
|
static int shrinker_memcg_alloc(struct shrinker *shrinker)
|
2023-09-11 02:25:15 -07:00
|
|
|
{
|
|
|
|
return -ENOSYS;
|
|
|
|
}
|
|
|
|
|
2023-09-11 02:44:40 -07:00
|
|
|
static void shrinker_memcg_remove(struct shrinker *shrinker)
|
2023-09-11 02:25:15 -07:00
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static long xchg_nr_deferred_memcg(int nid, struct shrinker *shrinker,
|
|
|
|
struct mem_cgroup *memcg)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static long add_nr_deferred_memcg(long nr, int nid, struct shrinker *shrinker,
|
|
|
|
struct mem_cgroup *memcg)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_MEMCG */
|
|
|
|
|
|
|
|
static long xchg_nr_deferred(struct shrinker *shrinker,
|
|
|
|
struct shrink_control *sc)
|
|
|
|
{
|
|
|
|
int nid = sc->nid;
|
|
|
|
|
|
|
|
if (!(shrinker->flags & SHRINKER_NUMA_AWARE))
|
|
|
|
nid = 0;
|
|
|
|
|
|
|
|
if (sc->memcg &&
|
|
|
|
(shrinker->flags & SHRINKER_MEMCG_AWARE))
|
|
|
|
return xchg_nr_deferred_memcg(nid, shrinker,
|
|
|
|
sc->memcg);
|
|
|
|
|
|
|
|
return atomic_long_xchg(&shrinker->nr_deferred[nid], 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static long add_nr_deferred(long nr, struct shrinker *shrinker,
|
|
|
|
struct shrink_control *sc)
|
|
|
|
{
|
|
|
|
int nid = sc->nid;
|
|
|
|
|
|
|
|
if (!(shrinker->flags & SHRINKER_NUMA_AWARE))
|
|
|
|
nid = 0;
|
|
|
|
|
|
|
|
if (sc->memcg &&
|
|
|
|
(shrinker->flags & SHRINKER_MEMCG_AWARE))
|
|
|
|
return add_nr_deferred_memcg(nr, nid, shrinker,
|
|
|
|
sc->memcg);
|
|
|
|
|
|
|
|
return atomic_long_add_return(nr, &shrinker->nr_deferred[nid]);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define SHRINK_BATCH 128
|
|
|
|
|
|
|
|
static unsigned long do_shrink_slab(struct shrink_control *shrinkctl,
|
|
|
|
struct shrinker *shrinker, int priority)
|
|
|
|
{
|
|
|
|
unsigned long freed = 0;
|
|
|
|
unsigned long long delta;
|
|
|
|
long total_scan;
|
|
|
|
long freeable;
|
|
|
|
long nr;
|
|
|
|
long new_nr;
|
|
|
|
long batch_size = shrinker->batch ? shrinker->batch
|
|
|
|
: SHRINK_BATCH;
|
|
|
|
long scanned = 0, next_deferred;
|
|
|
|
|
|
|
|
freeable = shrinker->count_objects(shrinker, shrinkctl);
|
|
|
|
if (freeable == 0 || freeable == SHRINK_EMPTY)
|
|
|
|
return freeable;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* copy the current shrinker scan count into a local variable
|
|
|
|
* and zero it so that other concurrent shrinker invocations
|
|
|
|
* don't also do this scanning work.
|
|
|
|
*/
|
|
|
|
nr = xchg_nr_deferred(shrinker, shrinkctl);
|
|
|
|
|
|
|
|
if (shrinker->seeks) {
|
|
|
|
delta = freeable >> priority;
|
|
|
|
delta *= 4;
|
|
|
|
do_div(delta, shrinker->seeks);
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* These objects don't require any IO to create. Trim
|
|
|
|
* them aggressively under memory pressure to keep
|
|
|
|
* them from causing refetches in the IO caches.
|
|
|
|
*/
|
|
|
|
delta = freeable / 2;
|
|
|
|
}
|
|
|
|
|
|
|
|
total_scan = nr >> priority;
|
|
|
|
total_scan += delta;
|
|
|
|
total_scan = min(total_scan, (2 * freeable));
|
|
|
|
|
|
|
|
trace_mm_shrink_slab_start(shrinker, shrinkctl, nr,
|
|
|
|
freeable, delta, total_scan, priority);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Normally, we should not scan less than batch_size objects in one
|
|
|
|
* pass to avoid too frequent shrinker calls, but if the slab has less
|
|
|
|
* than batch_size objects in total and we are really tight on memory,
|
|
|
|
* we will try to reclaim all available objects, otherwise we can end
|
|
|
|
* up failing allocations although there are plenty of reclaimable
|
|
|
|
* objects spread over several slabs with usage less than the
|
|
|
|
* batch_size.
|
|
|
|
*
|
|
|
|
* We detect the "tight on memory" situations by looking at the total
|
|
|
|
* number of objects we want to scan (total_scan). If it is greater
|
|
|
|
* than the total number of objects on slab (freeable), we must be
|
|
|
|
* scanning at high prio and therefore should try to reclaim as much as
|
|
|
|
* possible.
|
|
|
|
*/
|
|
|
|
while (total_scan >= batch_size ||
|
|
|
|
total_scan >= freeable) {
|
|
|
|
unsigned long ret;
|
|
|
|
unsigned long nr_to_scan = min(batch_size, total_scan);
|
|
|
|
|
|
|
|
shrinkctl->nr_to_scan = nr_to_scan;
|
|
|
|
shrinkctl->nr_scanned = nr_to_scan;
|
|
|
|
ret = shrinker->scan_objects(shrinker, shrinkctl);
|
|
|
|
if (ret == SHRINK_STOP)
|
|
|
|
break;
|
|
|
|
freed += ret;
|
|
|
|
|
|
|
|
count_vm_events(SLABS_SCANNED, shrinkctl->nr_scanned);
|
|
|
|
total_scan -= shrinkctl->nr_scanned;
|
|
|
|
scanned += shrinkctl->nr_scanned;
|
|
|
|
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The deferred work is increased by any new work (delta) that wasn't
|
|
|
|
* done, decreased by old deferred work that was done now.
|
|
|
|
*
|
|
|
|
* And it is capped to two times of the freeable items.
|
|
|
|
*/
|
|
|
|
next_deferred = max_t(long, (nr + delta - scanned), 0);
|
|
|
|
next_deferred = min(next_deferred, (2 * freeable));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* move the unused scan count back into the shrinker in a
|
|
|
|
* manner that handles concurrent updates.
|
|
|
|
*/
|
|
|
|
new_nr = add_nr_deferred(next_deferred, shrinker, shrinkctl);
|
|
|
|
|
|
|
|
trace_mm_shrink_slab_end(shrinker, shrinkctl->nid, freed, nr, new_nr, total_scan);
|
|
|
|
return freed;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_MEMCG
|
|
|
|
static unsigned long shrink_slab_memcg(gfp_t gfp_mask, int nid,
|
|
|
|
struct mem_cgroup *memcg, int priority)
|
|
|
|
{
|
|
|
|
struct shrinker_info *info;
|
|
|
|
unsigned long ret, freed = 0;
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
int offset, index = 0;
|
2023-09-11 02:25:15 -07:00
|
|
|
|
|
|
|
if (!mem_cgroup_online(memcg))
|
|
|
|
return 0;
|
|
|
|
|
2023-09-11 02:44:42 -07:00
|
|
|
/*
|
|
|
|
* lockless algorithm of memcg shrink.
|
|
|
|
*
|
|
|
|
* The shrinker_info may be freed asynchronously via RCU in the
|
|
|
|
* expand_one_shrinker_info(), so the rcu_read_lock() needs to be used
|
|
|
|
* to ensure the existence of the shrinker_info.
|
|
|
|
*
|
|
|
|
* The shrinker_info_unit is never freed unless its corresponding memcg
|
|
|
|
* is destroyed. Here we already hold the refcount of memcg, so the
|
|
|
|
* memcg will not be destroyed, and of course shrinker_info_unit will
|
|
|
|
* not be freed.
|
|
|
|
*
|
|
|
|
* So in the memcg shrink:
|
|
|
|
* step 1: use rcu_read_lock() to guarantee existence of the
|
|
|
|
* shrinker_info.
|
|
|
|
* step 2: after getting shrinker_info_unit we can safely release the
|
|
|
|
* RCU lock.
|
|
|
|
* step 3: traverse the bitmap and calculate shrinker_id
|
|
|
|
* step 4: use rcu_read_lock() to guarantee existence of the shrinker.
|
|
|
|
* step 5: use shrinker_id to find the shrinker, then use
|
|
|
|
* shrinker_try_get() to guarantee existence of the shrinker,
|
|
|
|
* then we can release the RCU lock to do do_shrink_slab() that
|
|
|
|
* may sleep.
|
|
|
|
* step 6: do shrinker_put() paired with step 5 to put the refcount,
|
|
|
|
* if the refcount reaches 0, then wake up the waiter in
|
|
|
|
* shrinker_free() by calling complete().
|
|
|
|
* Note: here is different from the global shrink, we don't
|
|
|
|
* need to acquire the RCU lock to guarantee existence of
|
|
|
|
* the shrinker, because we don't need to use this
|
|
|
|
* shrinker to traverse the next shrinker in the bitmap.
|
|
|
|
* step 7: we have already exited the read-side of rcu critical section
|
|
|
|
* before calling do_shrink_slab(), the shrinker_info may be
|
|
|
|
* released in expand_one_shrinker_info(), so go back to step 1
|
|
|
|
* to reacquire the shrinker_info.
|
|
|
|
*/
|
|
|
|
again:
|
|
|
|
rcu_read_lock();
|
|
|
|
info = rcu_dereference(memcg->nodeinfo[nid]->shrinker_info);
|
2023-09-11 02:25:15 -07:00
|
|
|
if (unlikely(!info))
|
|
|
|
goto unlock;
|
|
|
|
|
2023-09-11 02:44:42 -07:00
|
|
|
if (index < shrinker_id_to_index(info->map_nr_max)) {
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
struct shrinker_info_unit *unit;
|
2023-09-11 02:25:15 -07:00
|
|
|
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
unit = info->unit[index];
|
2023-09-11 02:25:15 -07:00
|
|
|
|
2023-09-11 02:44:42 -07:00
|
|
|
rcu_read_unlock();
|
|
|
|
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
for_each_set_bit(offset, unit->map, SHRINKER_UNIT_BITS) {
|
|
|
|
struct shrink_control sc = {
|
|
|
|
.gfp_mask = gfp_mask,
|
|
|
|
.nid = nid,
|
|
|
|
.memcg = memcg,
|
|
|
|
};
|
|
|
|
struct shrinker *shrinker;
|
|
|
|
int shrinker_id = calc_shrinker_id(index, offset);
|
2023-09-11 02:25:15 -07:00
|
|
|
|
2023-09-11 02:44:42 -07:00
|
|
|
rcu_read_lock();
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
shrinker = idr_find(&shrinker_idr, shrinker_id);
|
2023-09-11 02:44:42 -07:00
|
|
|
if (unlikely(!shrinker || !shrinker_try_get(shrinker))) {
|
|
|
|
clear_bit(offset, unit->map);
|
|
|
|
rcu_read_unlock();
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
continue;
|
|
|
|
}
|
2023-09-11 02:44:42 -07:00
|
|
|
rcu_read_unlock();
|
mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:39 -07:00
|
|
|
|
|
|
|
/* Call non-slab shrinkers even though kmem is disabled */
|
|
|
|
if (!memcg_kmem_online() &&
|
|
|
|
!(shrinker->flags & SHRINKER_NONSLAB))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
ret = do_shrink_slab(&sc, shrinker, priority);
|
|
|
|
if (ret == SHRINK_EMPTY) {
|
|
|
|
clear_bit(offset, unit->map);
|
|
|
|
/*
|
|
|
|
* After the shrinker reported that it had no objects to
|
|
|
|
* free, but before we cleared the corresponding bit in
|
|
|
|
* the memcg shrinker map, a new object might have been
|
|
|
|
* added. To make sure, we have the bit set in this
|
|
|
|
* case, we invoke the shrinker one more time and reset
|
|
|
|
* the bit if it reports that it is not empty anymore.
|
|
|
|
* The memory barrier here pairs with the barrier in
|
|
|
|
* set_shrinker_bit():
|
|
|
|
*
|
|
|
|
* list_lru_add() shrink_slab_memcg()
|
|
|
|
* list_add_tail() clear_bit()
|
|
|
|
* <MB> <MB>
|
|
|
|
* set_bit() do_shrink_slab()
|
|
|
|
*/
|
|
|
|
smp_mb__after_atomic();
|
|
|
|
ret = do_shrink_slab(&sc, shrinker, priority);
|
|
|
|
if (ret == SHRINK_EMPTY)
|
|
|
|
ret = 0;
|
|
|
|
else
|
|
|
|
set_shrinker_bit(memcg, nid, shrinker_id);
|
|
|
|
}
|
|
|
|
freed += ret;
|
2023-09-11 02:44:42 -07:00
|
|
|
shrinker_put(shrinker);
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
2023-09-11 02:44:42 -07:00
|
|
|
|
|
|
|
index++;
|
|
|
|
goto again;
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
|
|
|
unlock:
|
2023-09-11 02:44:42 -07:00
|
|
|
rcu_read_unlock();
|
2023-09-11 02:25:15 -07:00
|
|
|
return freed;
|
|
|
|
}
|
|
|
|
#else /* !CONFIG_MEMCG */
|
|
|
|
static unsigned long shrink_slab_memcg(gfp_t gfp_mask, int nid,
|
|
|
|
struct mem_cgroup *memcg, int priority)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_MEMCG */
|
|
|
|
|
|
|
|
/**
|
|
|
|
* shrink_slab - shrink slab caches
|
|
|
|
* @gfp_mask: allocation context
|
|
|
|
* @nid: node whose slab caches to target
|
|
|
|
* @memcg: memory cgroup whose slab caches to target
|
|
|
|
* @priority: the reclaim priority
|
|
|
|
*
|
|
|
|
* Call the shrink functions to age shrinkable caches.
|
|
|
|
*
|
|
|
|
* @nid is passed along to shrinkers with SHRINKER_NUMA_AWARE set,
|
|
|
|
* unaware shrinkers will receive a node id of 0 instead.
|
|
|
|
*
|
|
|
|
* @memcg specifies the memory cgroup to target. Unaware shrinkers
|
|
|
|
* are called only if it is the root cgroup.
|
|
|
|
*
|
|
|
|
* @priority is sc->priority, we take the number of objects and >> by priority
|
|
|
|
* in order to get the scan target.
|
|
|
|
*
|
|
|
|
* Returns the number of reclaimed slab objects.
|
|
|
|
*/
|
|
|
|
unsigned long shrink_slab(gfp_t gfp_mask, int nid, struct mem_cgroup *memcg,
|
|
|
|
int priority)
|
|
|
|
{
|
|
|
|
unsigned long ret, freed = 0;
|
|
|
|
struct shrinker *shrinker;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The root memcg might be allocated even though memcg is disabled
|
|
|
|
* via "cgroup_disable=memory" boot parameter. This could make
|
|
|
|
* mem_cgroup_is_root() return false, then just run memcg slab
|
|
|
|
* shrink, but skip global shrink. This may result in premature
|
|
|
|
* oom.
|
|
|
|
*/
|
|
|
|
if (!mem_cgroup_disabled() && !mem_cgroup_is_root(memcg))
|
|
|
|
return shrink_slab_memcg(gfp_mask, nid, memcg, priority);
|
|
|
|
|
mm: shrinker: make global slab shrink lockless
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:41 -07:00
|
|
|
/*
|
|
|
|
* lockless algorithm of global shrink.
|
|
|
|
*
|
|
|
|
* In the unregistration setp, the shrinker will be freed asynchronously
|
|
|
|
* via RCU after its refcount reaches 0. So both rcu_read_lock() and
|
|
|
|
* shrinker_try_get() can be used to ensure the existence of the shrinker.
|
|
|
|
*
|
|
|
|
* So in the global shrink:
|
|
|
|
* step 1: use rcu_read_lock() to guarantee existence of the shrinker
|
|
|
|
* and the validity of the shrinker_list walk.
|
|
|
|
* step 2: use shrinker_try_get() to try get the refcount, if successful,
|
|
|
|
* then the existence of the shrinker can also be guaranteed,
|
|
|
|
* so we can release the RCU lock to do do_shrink_slab() that
|
|
|
|
* may sleep.
|
|
|
|
* step 3: *MUST* to reacquire the RCU lock before calling shrinker_put(),
|
|
|
|
* which ensures that neither this shrinker nor the next shrinker
|
|
|
|
* will be freed in the next traversal operation.
|
|
|
|
* step 4: do shrinker_put() paired with step 2 to put the refcount,
|
|
|
|
* if the refcount reaches 0, then wake up the waiter in
|
|
|
|
* shrinker_free() by calling complete().
|
|
|
|
*/
|
|
|
|
rcu_read_lock();
|
|
|
|
list_for_each_entry_rcu(shrinker, &shrinker_list, list) {
|
2023-09-11 02:25:15 -07:00
|
|
|
struct shrink_control sc = {
|
|
|
|
.gfp_mask = gfp_mask,
|
|
|
|
.nid = nid,
|
|
|
|
.memcg = memcg,
|
|
|
|
};
|
|
|
|
|
mm: shrinker: make global slab shrink lockless
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:41 -07:00
|
|
|
if (!shrinker_try_get(shrinker))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
2023-09-11 02:25:15 -07:00
|
|
|
ret = do_shrink_slab(&sc, shrinker, priority);
|
|
|
|
if (ret == SHRINK_EMPTY)
|
|
|
|
ret = 0;
|
|
|
|
freed += ret;
|
mm: shrinker: make global slab shrink lockless
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:41 -07:00
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
shrinker_put(shrinker);
|
2023-09-11 02:25:15 -07:00
|
|
|
}
|
|
|
|
|
mm: shrinker: make global slab shrink lockless
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:41 -07:00
|
|
|
rcu_read_unlock();
|
2023-09-11 02:25:15 -07:00
|
|
|
cond_resched();
|
|
|
|
return freed;
|
|
|
|
}
|
|
|
|
|
mm: shrinker: add infrastructure for dynamically allocating shrinker
Patch series "use refcount+RCU method to implement lockless slab shrink",
v6.
1. Background
=============
We used to implement the lockless slab shrink with SRCU [1], but then kernel
test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test
case [2], so we reverted it [3].
This patch series aims to re-implement the lockless slab shrink using the
refcount+RCU method proposed by Dave Chinner [4].
[1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
2. Implementation
=================
Currently, the shrinker instances can be divided into the following three types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such as
mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b, the
memory of shrinker instance will be freed after synchronize_rcu() when the
module is unloaded. For case c, the memory of shrinker instance will be freed
along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to dynamically
allocate those shrinker instances in case c, then the memory can be dynamically
freed alone by calling kfree_rcu().
This patchset adds the following new APIs for dynamically allocating shrinker,
and add a private_data field to struct shrinker to record and get the original
embedded structure.
1. shrinker_alloc()
2. shrinker_register()
3. shrinker_free()
In order to simplify shrinker-related APIs and make shrinker more independent of
other kernel mechanisms, this patchset uses the above APIs to convert all
shrinkers (including case a and b) to dynamically allocated, and then remove all
existing APIs. This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing out of tree
code and third party modules using the old API and will no longer work with a
kernel using lockless slab shrinkers. They need to break (both at the source and
binary levels) to stop bad things from happening due to using uncoverted
shrinkers in the new setup.
```
Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}()
to ensure that the shrinker instance is valid. And the shrinker::refcount
mechanism ensures that the shrinker instance will not be run again after
unregistration. So the structure that records the pointer of shrinker instance
can be safely freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to be
blocked in unregister_shrinker() to wait RCU read-side critical section.
PATCH 1: introduce new APIs
PATCH 2~38: convert all shrinnkers to use new APIs
PATCH 39: remove old APIs
PATCH 40~41: some cleanups and preparations
PATCH 42-43: implement the lockless slab shrink
PATCH 44~45: convert shrinker_rwsem to mutex
3. Testing
==========
3.1 slab shrink stress test
---------------------------
We can reproduce the down_read_trylock() hotspot through the following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what we
expect.
3.2 registration and unregistration stress test
-----------------------------------------------
Run the command below to test:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
This patch (of 45):
Currently, the shrinker instances can be divided into the following three
types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such
as mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b,
the memory of shrinker instance will be freed after synchronize_rcu() when
the module is unloaded. For case c, the memory of shrinker instance will
be freed along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to
dynamically allocate those shrinker instances in case c, then the memory
can be dynamically freed alone by calling kfree_rcu().
So this commit adds the following new APIs for dynamically allocating
shrinker, and add a private_data field to struct shrinker to record and
get the original embedded structure.
1. shrinker_alloc()
Used to allocate shrinker instance itself and related memory, it will
return a pointer to the shrinker instance on success and NULL on failure.
2. shrinker_register()
Used to register the shrinker instance, which is same as the current
register_shrinker_prepared().
3. shrinker_free()
Used to unregister (if needed) and free the shrinker instance.
In order to simplify shrinker-related APIs and make shrinker more
independent of other kernel mechanisms, subsequent submissions will use
the above API to convert all shrinkers (including case a and b) to
dynamically allocated, and then remove all existing APIs.
This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing
out of tree code and third party modules using the old API and will
no longer work with a kernel using lockless slab shrinkers. They
need to break (both at the source and binary levels) to stop bad
things from happening due to using unconverted shrinkers in the new
setup.
```
[zhengqi.arch@bytedance.com: mm: shrinker: some cleanup]
Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:00 -07:00
|
|
|
struct shrinker *shrinker_alloc(unsigned int flags, const char *fmt, ...)
|
|
|
|
{
|
|
|
|
struct shrinker *shrinker;
|
|
|
|
unsigned int size;
|
|
|
|
va_list ap;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
shrinker = kzalloc(sizeof(struct shrinker), GFP_KERNEL);
|
|
|
|
if (!shrinker)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
va_start(ap, fmt);
|
|
|
|
err = shrinker_debugfs_name_alloc(shrinker, fmt, ap);
|
|
|
|
va_end(ap);
|
|
|
|
if (err)
|
|
|
|
goto err_name;
|
|
|
|
|
|
|
|
shrinker->flags = flags | SHRINKER_ALLOCATED;
|
|
|
|
shrinker->seeks = DEFAULT_SEEKS;
|
|
|
|
|
|
|
|
if (flags & SHRINKER_MEMCG_AWARE) {
|
2023-09-11 02:44:40 -07:00
|
|
|
err = shrinker_memcg_alloc(shrinker);
|
mm: shrinker: add infrastructure for dynamically allocating shrinker
Patch series "use refcount+RCU method to implement lockless slab shrink",
v6.
1. Background
=============
We used to implement the lockless slab shrink with SRCU [1], but then kernel
test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test
case [2], so we reverted it [3].
This patch series aims to re-implement the lockless slab shrink using the
refcount+RCU method proposed by Dave Chinner [4].
[1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
2. Implementation
=================
Currently, the shrinker instances can be divided into the following three types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such as
mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b, the
memory of shrinker instance will be freed after synchronize_rcu() when the
module is unloaded. For case c, the memory of shrinker instance will be freed
along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to dynamically
allocate those shrinker instances in case c, then the memory can be dynamically
freed alone by calling kfree_rcu().
This patchset adds the following new APIs for dynamically allocating shrinker,
and add a private_data field to struct shrinker to record and get the original
embedded structure.
1. shrinker_alloc()
2. shrinker_register()
3. shrinker_free()
In order to simplify shrinker-related APIs and make shrinker more independent of
other kernel mechanisms, this patchset uses the above APIs to convert all
shrinkers (including case a and b) to dynamically allocated, and then remove all
existing APIs. This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing out of tree
code and third party modules using the old API and will no longer work with a
kernel using lockless slab shrinkers. They need to break (both at the source and
binary levels) to stop bad things from happening due to using uncoverted
shrinkers in the new setup.
```
Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}()
to ensure that the shrinker instance is valid. And the shrinker::refcount
mechanism ensures that the shrinker instance will not be run again after
unregistration. So the structure that records the pointer of shrinker instance
can be safely freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to be
blocked in unregister_shrinker() to wait RCU read-side critical section.
PATCH 1: introduce new APIs
PATCH 2~38: convert all shrinnkers to use new APIs
PATCH 39: remove old APIs
PATCH 40~41: some cleanups and preparations
PATCH 42-43: implement the lockless slab shrink
PATCH 44~45: convert shrinker_rwsem to mutex
3. Testing
==========
3.1 slab shrink stress test
---------------------------
We can reproduce the down_read_trylock() hotspot through the following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what we
expect.
3.2 registration and unregistration stress test
-----------------------------------------------
Run the command below to test:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
This patch (of 45):
Currently, the shrinker instances can be divided into the following three
types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such
as mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b,
the memory of shrinker instance will be freed after synchronize_rcu() when
the module is unloaded. For case c, the memory of shrinker instance will
be freed along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to
dynamically allocate those shrinker instances in case c, then the memory
can be dynamically freed alone by calling kfree_rcu().
So this commit adds the following new APIs for dynamically allocating
shrinker, and add a private_data field to struct shrinker to record and
get the original embedded structure.
1. shrinker_alloc()
Used to allocate shrinker instance itself and related memory, it will
return a pointer to the shrinker instance on success and NULL on failure.
2. shrinker_register()
Used to register the shrinker instance, which is same as the current
register_shrinker_prepared().
3. shrinker_free()
Used to unregister (if needed) and free the shrinker instance.
In order to simplify shrinker-related APIs and make shrinker more
independent of other kernel mechanisms, subsequent submissions will use
the above API to convert all shrinkers (including case a and b) to
dynamically allocated, and then remove all existing APIs.
This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing
out of tree code and third party modules using the old API and will
no longer work with a kernel using lockless slab shrinkers. They
need to break (both at the source and binary levels) to stop bad
things from happening due to using unconverted shrinkers in the new
setup.
```
[zhengqi.arch@bytedance.com: mm: shrinker: some cleanup]
Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:00 -07:00
|
|
|
if (err == -ENOSYS) {
|
|
|
|
/* Memcg is not supported, fallback to non-memcg-aware shrinker. */
|
|
|
|
shrinker->flags &= ~SHRINKER_MEMCG_AWARE;
|
|
|
|
goto non_memcg;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
goto err_flags;
|
|
|
|
|
|
|
|
return shrinker;
|
|
|
|
}
|
|
|
|
|
|
|
|
non_memcg:
|
|
|
|
/*
|
|
|
|
* The nr_deferred is available on per memcg level for memcg aware
|
|
|
|
* shrinkers, so only allocate nr_deferred in the following cases:
|
|
|
|
* - non-memcg-aware shrinkers
|
|
|
|
* - !CONFIG_MEMCG
|
|
|
|
* - memcg is disabled by kernel command line
|
|
|
|
*/
|
|
|
|
size = sizeof(*shrinker->nr_deferred);
|
|
|
|
if (flags & SHRINKER_NUMA_AWARE)
|
|
|
|
size *= nr_node_ids;
|
|
|
|
|
|
|
|
shrinker->nr_deferred = kzalloc(size, GFP_KERNEL);
|
|
|
|
if (!shrinker->nr_deferred)
|
|
|
|
goto err_flags;
|
|
|
|
|
|
|
|
return shrinker;
|
|
|
|
|
|
|
|
err_flags:
|
|
|
|
shrinker_debugfs_name_free(shrinker);
|
|
|
|
err_name:
|
|
|
|
kfree(shrinker);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(shrinker_alloc);
|
|
|
|
|
|
|
|
void shrinker_register(struct shrinker *shrinker)
|
|
|
|
{
|
|
|
|
if (unlikely(!(shrinker->flags & SHRINKER_ALLOCATED))) {
|
|
|
|
pr_warn("Must use shrinker_alloc() to dynamically allocate the shrinker");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2023-09-11 02:44:44 -07:00
|
|
|
mutex_lock(&shrinker_mutex);
|
mm: shrinker: make global slab shrink lockless
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:41 -07:00
|
|
|
list_add_tail_rcu(&shrinker->list, &shrinker_list);
|
mm: shrinker: add infrastructure for dynamically allocating shrinker
Patch series "use refcount+RCU method to implement lockless slab shrink",
v6.
1. Background
=============
We used to implement the lockless slab shrink with SRCU [1], but then kernel
test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test
case [2], so we reverted it [3].
This patch series aims to re-implement the lockless slab shrink using the
refcount+RCU method proposed by Dave Chinner [4].
[1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
2. Implementation
=================
Currently, the shrinker instances can be divided into the following three types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such as
mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b, the
memory of shrinker instance will be freed after synchronize_rcu() when the
module is unloaded. For case c, the memory of shrinker instance will be freed
along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to dynamically
allocate those shrinker instances in case c, then the memory can be dynamically
freed alone by calling kfree_rcu().
This patchset adds the following new APIs for dynamically allocating shrinker,
and add a private_data field to struct shrinker to record and get the original
embedded structure.
1. shrinker_alloc()
2. shrinker_register()
3. shrinker_free()
In order to simplify shrinker-related APIs and make shrinker more independent of
other kernel mechanisms, this patchset uses the above APIs to convert all
shrinkers (including case a and b) to dynamically allocated, and then remove all
existing APIs. This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing out of tree
code and third party modules using the old API and will no longer work with a
kernel using lockless slab shrinkers. They need to break (both at the source and
binary levels) to stop bad things from happening due to using uncoverted
shrinkers in the new setup.
```
Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}()
to ensure that the shrinker instance is valid. And the shrinker::refcount
mechanism ensures that the shrinker instance will not be run again after
unregistration. So the structure that records the pointer of shrinker instance
can be safely freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to be
blocked in unregister_shrinker() to wait RCU read-side critical section.
PATCH 1: introduce new APIs
PATCH 2~38: convert all shrinnkers to use new APIs
PATCH 39: remove old APIs
PATCH 40~41: some cleanups and preparations
PATCH 42-43: implement the lockless slab shrink
PATCH 44~45: convert shrinker_rwsem to mutex
3. Testing
==========
3.1 slab shrink stress test
---------------------------
We can reproduce the down_read_trylock() hotspot through the following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what we
expect.
3.2 registration and unregistration stress test
-----------------------------------------------
Run the command below to test:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
This patch (of 45):
Currently, the shrinker instances can be divided into the following three
types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such
as mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b,
the memory of shrinker instance will be freed after synchronize_rcu() when
the module is unloaded. For case c, the memory of shrinker instance will
be freed along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to
dynamically allocate those shrinker instances in case c, then the memory
can be dynamically freed alone by calling kfree_rcu().
So this commit adds the following new APIs for dynamically allocating
shrinker, and add a private_data field to struct shrinker to record and
get the original embedded structure.
1. shrinker_alloc()
Used to allocate shrinker instance itself and related memory, it will
return a pointer to the shrinker instance on success and NULL on failure.
2. shrinker_register()
Used to register the shrinker instance, which is same as the current
register_shrinker_prepared().
3. shrinker_free()
Used to unregister (if needed) and free the shrinker instance.
In order to simplify shrinker-related APIs and make shrinker more
independent of other kernel mechanisms, subsequent submissions will use
the above API to convert all shrinkers (including case a and b) to
dynamically allocated, and then remove all existing APIs.
This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing
out of tree code and third party modules using the old API and will
no longer work with a kernel using lockless slab shrinkers. They
need to break (both at the source and binary levels) to stop bad
things from happening due to using unconverted shrinkers in the new
setup.
```
[zhengqi.arch@bytedance.com: mm: shrinker: some cleanup]
Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:00 -07:00
|
|
|
shrinker->flags |= SHRINKER_REGISTERED;
|
|
|
|
shrinker_debugfs_add(shrinker);
|
2023-09-11 02:44:44 -07:00
|
|
|
mutex_unlock(&shrinker_mutex);
|
mm: shrinker: make global slab shrink lockless
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:41 -07:00
|
|
|
|
|
|
|
init_completion(&shrinker->done);
|
|
|
|
/*
|
|
|
|
* Now the shrinker is fully set up, take the first reference to it to
|
|
|
|
* indicate that lookup operations are now allowed to use it via
|
|
|
|
* shrinker_try_get().
|
|
|
|
*/
|
|
|
|
refcount_set(&shrinker->refcount, 1);
|
mm: shrinker: add infrastructure for dynamically allocating shrinker
Patch series "use refcount+RCU method to implement lockless slab shrink",
v6.
1. Background
=============
We used to implement the lockless slab shrink with SRCU [1], but then kernel
test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test
case [2], so we reverted it [3].
This patch series aims to re-implement the lockless slab shrink using the
refcount+RCU method proposed by Dave Chinner [4].
[1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
2. Implementation
=================
Currently, the shrinker instances can be divided into the following three types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such as
mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b, the
memory of shrinker instance will be freed after synchronize_rcu() when the
module is unloaded. For case c, the memory of shrinker instance will be freed
along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to dynamically
allocate those shrinker instances in case c, then the memory can be dynamically
freed alone by calling kfree_rcu().
This patchset adds the following new APIs for dynamically allocating shrinker,
and add a private_data field to struct shrinker to record and get the original
embedded structure.
1. shrinker_alloc()
2. shrinker_register()
3. shrinker_free()
In order to simplify shrinker-related APIs and make shrinker more independent of
other kernel mechanisms, this patchset uses the above APIs to convert all
shrinkers (including case a and b) to dynamically allocated, and then remove all
existing APIs. This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing out of tree
code and third party modules using the old API and will no longer work with a
kernel using lockless slab shrinkers. They need to break (both at the source and
binary levels) to stop bad things from happening due to using uncoverted
shrinkers in the new setup.
```
Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}()
to ensure that the shrinker instance is valid. And the shrinker::refcount
mechanism ensures that the shrinker instance will not be run again after
unregistration. So the structure that records the pointer of shrinker instance
can be safely freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to be
blocked in unregister_shrinker() to wait RCU read-side critical section.
PATCH 1: introduce new APIs
PATCH 2~38: convert all shrinnkers to use new APIs
PATCH 39: remove old APIs
PATCH 40~41: some cleanups and preparations
PATCH 42-43: implement the lockless slab shrink
PATCH 44~45: convert shrinker_rwsem to mutex
3. Testing
==========
3.1 slab shrink stress test
---------------------------
We can reproduce the down_read_trylock() hotspot through the following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what we
expect.
3.2 registration and unregistration stress test
-----------------------------------------------
Run the command below to test:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
This patch (of 45):
Currently, the shrinker instances can be divided into the following three
types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such
as mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b,
the memory of shrinker instance will be freed after synchronize_rcu() when
the module is unloaded. For case c, the memory of shrinker instance will
be freed along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to
dynamically allocate those shrinker instances in case c, then the memory
can be dynamically freed alone by calling kfree_rcu().
So this commit adds the following new APIs for dynamically allocating
shrinker, and add a private_data field to struct shrinker to record and
get the original embedded structure.
1. shrinker_alloc()
Used to allocate shrinker instance itself and related memory, it will
return a pointer to the shrinker instance on success and NULL on failure.
2. shrinker_register()
Used to register the shrinker instance, which is same as the current
register_shrinker_prepared().
3. shrinker_free()
Used to unregister (if needed) and free the shrinker instance.
In order to simplify shrinker-related APIs and make shrinker more
independent of other kernel mechanisms, subsequent submissions will use
the above API to convert all shrinkers (including case a and b) to
dynamically allocated, and then remove all existing APIs.
This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing
out of tree code and third party modules using the old API and will
no longer work with a kernel using lockless slab shrinkers. They
need to break (both at the source and binary levels) to stop bad
things from happening due to using unconverted shrinkers in the new
setup.
```
[zhengqi.arch@bytedance.com: mm: shrinker: some cleanup]
Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:00 -07:00
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(shrinker_register);
|
|
|
|
|
mm: shrinker: make global slab shrink lockless
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:41 -07:00
|
|
|
static void shrinker_free_rcu_cb(struct rcu_head *head)
|
|
|
|
{
|
|
|
|
struct shrinker *shrinker = container_of(head, struct shrinker, rcu);
|
|
|
|
|
|
|
|
kfree(shrinker->nr_deferred);
|
|
|
|
kfree(shrinker);
|
|
|
|
}
|
|
|
|
|
mm: shrinker: add infrastructure for dynamically allocating shrinker
Patch series "use refcount+RCU method to implement lockless slab shrink",
v6.
1. Background
=============
We used to implement the lockless slab shrink with SRCU [1], but then kernel
test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test
case [2], so we reverted it [3].
This patch series aims to re-implement the lockless slab shrink using the
refcount+RCU method proposed by Dave Chinner [4].
[1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
2. Implementation
=================
Currently, the shrinker instances can be divided into the following three types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such as
mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b, the
memory of shrinker instance will be freed after synchronize_rcu() when the
module is unloaded. For case c, the memory of shrinker instance will be freed
along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to dynamically
allocate those shrinker instances in case c, then the memory can be dynamically
freed alone by calling kfree_rcu().
This patchset adds the following new APIs for dynamically allocating shrinker,
and add a private_data field to struct shrinker to record and get the original
embedded structure.
1. shrinker_alloc()
2. shrinker_register()
3. shrinker_free()
In order to simplify shrinker-related APIs and make shrinker more independent of
other kernel mechanisms, this patchset uses the above APIs to convert all
shrinkers (including case a and b) to dynamically allocated, and then remove all
existing APIs. This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing out of tree
code and third party modules using the old API and will no longer work with a
kernel using lockless slab shrinkers. They need to break (both at the source and
binary levels) to stop bad things from happening due to using uncoverted
shrinkers in the new setup.
```
Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}()
to ensure that the shrinker instance is valid. And the shrinker::refcount
mechanism ensures that the shrinker instance will not be run again after
unregistration. So the structure that records the pointer of shrinker instance
can be safely freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to be
blocked in unregister_shrinker() to wait RCU read-side critical section.
PATCH 1: introduce new APIs
PATCH 2~38: convert all shrinnkers to use new APIs
PATCH 39: remove old APIs
PATCH 40~41: some cleanups and preparations
PATCH 42-43: implement the lockless slab shrink
PATCH 44~45: convert shrinker_rwsem to mutex
3. Testing
==========
3.1 slab shrink stress test
---------------------------
We can reproduce the down_read_trylock() hotspot through the following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what we
expect.
3.2 registration and unregistration stress test
-----------------------------------------------
Run the command below to test:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
This patch (of 45):
Currently, the shrinker instances can be divided into the following three
types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such
as mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b,
the memory of shrinker instance will be freed after synchronize_rcu() when
the module is unloaded. For case c, the memory of shrinker instance will
be freed along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to
dynamically allocate those shrinker instances in case c, then the memory
can be dynamically freed alone by calling kfree_rcu().
So this commit adds the following new APIs for dynamically allocating
shrinker, and add a private_data field to struct shrinker to record and
get the original embedded structure.
1. shrinker_alloc()
Used to allocate shrinker instance itself and related memory, it will
return a pointer to the shrinker instance on success and NULL on failure.
2. shrinker_register()
Used to register the shrinker instance, which is same as the current
register_shrinker_prepared().
3. shrinker_free()
Used to unregister (if needed) and free the shrinker instance.
In order to simplify shrinker-related APIs and make shrinker more
independent of other kernel mechanisms, subsequent submissions will use
the above API to convert all shrinkers (including case a and b) to
dynamically allocated, and then remove all existing APIs.
This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing
out of tree code and third party modules using the old API and will
no longer work with a kernel using lockless slab shrinkers. They
need to break (both at the source and binary levels) to stop bad
things from happening due to using unconverted shrinkers in the new
setup.
```
[zhengqi.arch@bytedance.com: mm: shrinker: some cleanup]
Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:00 -07:00
|
|
|
void shrinker_free(struct shrinker *shrinker)
|
|
|
|
{
|
|
|
|
struct dentry *debugfs_entry = NULL;
|
|
|
|
int debugfs_id;
|
|
|
|
|
|
|
|
if (!shrinker)
|
|
|
|
return;
|
|
|
|
|
mm: shrinker: make global slab shrink lockless
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:41 -07:00
|
|
|
if (shrinker->flags & SHRINKER_REGISTERED) {
|
|
|
|
/* drop the initial refcount */
|
|
|
|
shrinker_put(shrinker);
|
|
|
|
/*
|
|
|
|
* Wait for all lookups of the shrinker to complete, after that,
|
|
|
|
* no shrinker is running or will run again, then we can safely
|
|
|
|
* free it asynchronously via RCU and safely free the structure
|
|
|
|
* where the shrinker is located, such as super_block etc.
|
|
|
|
*/
|
|
|
|
wait_for_completion(&shrinker->done);
|
|
|
|
}
|
|
|
|
|
2023-09-11 02:44:44 -07:00
|
|
|
mutex_lock(&shrinker_mutex);
|
mm: shrinker: add infrastructure for dynamically allocating shrinker
Patch series "use refcount+RCU method to implement lockless slab shrink",
v6.
1. Background
=============
We used to implement the lockless slab shrink with SRCU [1], but then kernel
test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test
case [2], so we reverted it [3].
This patch series aims to re-implement the lockless slab shrink using the
refcount+RCU method proposed by Dave Chinner [4].
[1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
2. Implementation
=================
Currently, the shrinker instances can be divided into the following three types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such as
mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b, the
memory of shrinker instance will be freed after synchronize_rcu() when the
module is unloaded. For case c, the memory of shrinker instance will be freed
along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to dynamically
allocate those shrinker instances in case c, then the memory can be dynamically
freed alone by calling kfree_rcu().
This patchset adds the following new APIs for dynamically allocating shrinker,
and add a private_data field to struct shrinker to record and get the original
embedded structure.
1. shrinker_alloc()
2. shrinker_register()
3. shrinker_free()
In order to simplify shrinker-related APIs and make shrinker more independent of
other kernel mechanisms, this patchset uses the above APIs to convert all
shrinkers (including case a and b) to dynamically allocated, and then remove all
existing APIs. This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing out of tree
code and third party modules using the old API and will no longer work with a
kernel using lockless slab shrinkers. They need to break (both at the source and
binary levels) to stop bad things from happening due to using uncoverted
shrinkers in the new setup.
```
Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}()
to ensure that the shrinker instance is valid. And the shrinker::refcount
mechanism ensures that the shrinker instance will not be run again after
unregistration. So the structure that records the pointer of shrinker instance
can be safely freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to be
blocked in unregister_shrinker() to wait RCU read-side critical section.
PATCH 1: introduce new APIs
PATCH 2~38: convert all shrinnkers to use new APIs
PATCH 39: remove old APIs
PATCH 40~41: some cleanups and preparations
PATCH 42-43: implement the lockless slab shrink
PATCH 44~45: convert shrinker_rwsem to mutex
3. Testing
==========
3.1 slab shrink stress test
---------------------------
We can reproduce the down_read_trylock() hotspot through the following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what we
expect.
3.2 registration and unregistration stress test
-----------------------------------------------
Run the command below to test:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
This patch (of 45):
Currently, the shrinker instances can be divided into the following three
types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such
as mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b,
the memory of shrinker instance will be freed after synchronize_rcu() when
the module is unloaded. For case c, the memory of shrinker instance will
be freed along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to
dynamically allocate those shrinker instances in case c, then the memory
can be dynamically freed alone by calling kfree_rcu().
So this commit adds the following new APIs for dynamically allocating
shrinker, and add a private_data field to struct shrinker to record and
get the original embedded structure.
1. shrinker_alloc()
Used to allocate shrinker instance itself and related memory, it will
return a pointer to the shrinker instance on success and NULL on failure.
2. shrinker_register()
Used to register the shrinker instance, which is same as the current
register_shrinker_prepared().
3. shrinker_free()
Used to unregister (if needed) and free the shrinker instance.
In order to simplify shrinker-related APIs and make shrinker more
independent of other kernel mechanisms, subsequent submissions will use
the above API to convert all shrinkers (including case a and b) to
dynamically allocated, and then remove all existing APIs.
This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing
out of tree code and third party modules using the old API and will
no longer work with a kernel using lockless slab shrinkers. They
need to break (both at the source and binary levels) to stop bad
things from happening due to using unconverted shrinkers in the new
setup.
```
[zhengqi.arch@bytedance.com: mm: shrinker: some cleanup]
Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:00 -07:00
|
|
|
if (shrinker->flags & SHRINKER_REGISTERED) {
|
mm: shrinker: make global slab shrink lockless
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:41 -07:00
|
|
|
/*
|
|
|
|
* Now we can safely remove it from the shrinker_list and then
|
|
|
|
* free it.
|
|
|
|
*/
|
|
|
|
list_del_rcu(&shrinker->list);
|
mm: shrinker: add infrastructure for dynamically allocating shrinker
Patch series "use refcount+RCU method to implement lockless slab shrink",
v6.
1. Background
=============
We used to implement the lockless slab shrink with SRCU [1], but then kernel
test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test
case [2], so we reverted it [3].
This patch series aims to re-implement the lockless slab shrink using the
refcount+RCU method proposed by Dave Chinner [4].
[1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
2. Implementation
=================
Currently, the shrinker instances can be divided into the following three types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such as
mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b, the
memory of shrinker instance will be freed after synchronize_rcu() when the
module is unloaded. For case c, the memory of shrinker instance will be freed
along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to dynamically
allocate those shrinker instances in case c, then the memory can be dynamically
freed alone by calling kfree_rcu().
This patchset adds the following new APIs for dynamically allocating shrinker,
and add a private_data field to struct shrinker to record and get the original
embedded structure.
1. shrinker_alloc()
2. shrinker_register()
3. shrinker_free()
In order to simplify shrinker-related APIs and make shrinker more independent of
other kernel mechanisms, this patchset uses the above APIs to convert all
shrinkers (including case a and b) to dynamically allocated, and then remove all
existing APIs. This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing out of tree
code and third party modules using the old API and will no longer work with a
kernel using lockless slab shrinkers. They need to break (both at the source and
binary levels) to stop bad things from happening due to using uncoverted
shrinkers in the new setup.
```
Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}()
to ensure that the shrinker instance is valid. And the shrinker::refcount
mechanism ensures that the shrinker instance will not be run again after
unregistration. So the structure that records the pointer of shrinker instance
can be safely freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to be
blocked in unregister_shrinker() to wait RCU read-side critical section.
PATCH 1: introduce new APIs
PATCH 2~38: convert all shrinnkers to use new APIs
PATCH 39: remove old APIs
PATCH 40~41: some cleanups and preparations
PATCH 42-43: implement the lockless slab shrink
PATCH 44~45: convert shrinker_rwsem to mutex
3. Testing
==========
3.1 slab shrink stress test
---------------------------
We can reproduce the down_read_trylock() hotspot through the following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what we
expect.
3.2 registration and unregistration stress test
-----------------------------------------------
Run the command below to test:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
This patch (of 45):
Currently, the shrinker instances can be divided into the following three
types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such
as mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b,
the memory of shrinker instance will be freed after synchronize_rcu() when
the module is unloaded. For case c, the memory of shrinker instance will
be freed along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to
dynamically allocate those shrinker instances in case c, then the memory
can be dynamically freed alone by calling kfree_rcu().
So this commit adds the following new APIs for dynamically allocating
shrinker, and add a private_data field to struct shrinker to record and
get the original embedded structure.
1. shrinker_alloc()
Used to allocate shrinker instance itself and related memory, it will
return a pointer to the shrinker instance on success and NULL on failure.
2. shrinker_register()
Used to register the shrinker instance, which is same as the current
register_shrinker_prepared().
3. shrinker_free()
Used to unregister (if needed) and free the shrinker instance.
In order to simplify shrinker-related APIs and make shrinker more
independent of other kernel mechanisms, subsequent submissions will use
the above API to convert all shrinkers (including case a and b) to
dynamically allocated, and then remove all existing APIs.
This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing
out of tree code and third party modules using the old API and will
no longer work with a kernel using lockless slab shrinkers. They
need to break (both at the source and binary levels) to stop bad
things from happening due to using unconverted shrinkers in the new
setup.
```
[zhengqi.arch@bytedance.com: mm: shrinker: some cleanup]
Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:00 -07:00
|
|
|
debugfs_entry = shrinker_debugfs_detach(shrinker, &debugfs_id);
|
|
|
|
shrinker->flags &= ~SHRINKER_REGISTERED;
|
|
|
|
}
|
|
|
|
|
|
|
|
shrinker_debugfs_name_free(shrinker);
|
|
|
|
|
|
|
|
if (shrinker->flags & SHRINKER_MEMCG_AWARE)
|
2023-09-11 02:44:40 -07:00
|
|
|
shrinker_memcg_remove(shrinker);
|
2023-09-11 02:44:44 -07:00
|
|
|
mutex_unlock(&shrinker_mutex);
|
mm: shrinker: add infrastructure for dynamically allocating shrinker
Patch series "use refcount+RCU method to implement lockless slab shrink",
v6.
1. Background
=============
We used to implement the lockless slab shrink with SRCU [1], but then kernel
test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test
case [2], so we reverted it [3].
This patch series aims to re-implement the lockless slab shrink using the
refcount+RCU method proposed by Dave Chinner [4].
[1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
2. Implementation
=================
Currently, the shrinker instances can be divided into the following three types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such as
mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b, the
memory of shrinker instance will be freed after synchronize_rcu() when the
module is unloaded. For case c, the memory of shrinker instance will be freed
along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to dynamically
allocate those shrinker instances in case c, then the memory can be dynamically
freed alone by calling kfree_rcu().
This patchset adds the following new APIs for dynamically allocating shrinker,
and add a private_data field to struct shrinker to record and get the original
embedded structure.
1. shrinker_alloc()
2. shrinker_register()
3. shrinker_free()
In order to simplify shrinker-related APIs and make shrinker more independent of
other kernel mechanisms, this patchset uses the above APIs to convert all
shrinkers (including case a and b) to dynamically allocated, and then remove all
existing APIs. This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing out of tree
code and third party modules using the old API and will no longer work with a
kernel using lockless slab shrinkers. They need to break (both at the source and
binary levels) to stop bad things from happening due to using uncoverted
shrinkers in the new setup.
```
Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}()
to ensure that the shrinker instance is valid. And the shrinker::refcount
mechanism ensures that the shrinker instance will not be run again after
unregistration. So the structure that records the pointer of shrinker instance
can be safely freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to be
blocked in unregister_shrinker() to wait RCU read-side critical section.
PATCH 1: introduce new APIs
PATCH 2~38: convert all shrinnkers to use new APIs
PATCH 39: remove old APIs
PATCH 40~41: some cleanups and preparations
PATCH 42-43: implement the lockless slab shrink
PATCH 44~45: convert shrinker_rwsem to mutex
3. Testing
==========
3.1 slab shrink stress test
---------------------------
We can reproduce the down_read_trylock() hotspot through the following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what we
expect.
3.2 registration and unregistration stress test
-----------------------------------------------
Run the command below to test:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
This patch (of 45):
Currently, the shrinker instances can be divided into the following three
types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such
as mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b,
the memory of shrinker instance will be freed after synchronize_rcu() when
the module is unloaded. For case c, the memory of shrinker instance will
be freed along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to
dynamically allocate those shrinker instances in case c, then the memory
can be dynamically freed alone by calling kfree_rcu().
So this commit adds the following new APIs for dynamically allocating
shrinker, and add a private_data field to struct shrinker to record and
get the original embedded structure.
1. shrinker_alloc()
Used to allocate shrinker instance itself and related memory, it will
return a pointer to the shrinker instance on success and NULL on failure.
2. shrinker_register()
Used to register the shrinker instance, which is same as the current
register_shrinker_prepared().
3. shrinker_free()
Used to unregister (if needed) and free the shrinker instance.
In order to simplify shrinker-related APIs and make shrinker more
independent of other kernel mechanisms, subsequent submissions will use
the above API to convert all shrinkers (including case a and b) to
dynamically allocated, and then remove all existing APIs.
This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing
out of tree code and third party modules using the old API and will
no longer work with a kernel using lockless slab shrinkers. They
need to break (both at the source and binary levels) to stop bad
things from happening due to using unconverted shrinkers in the new
setup.
```
[zhengqi.arch@bytedance.com: mm: shrinker: some cleanup]
Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:00 -07:00
|
|
|
|
|
|
|
if (debugfs_entry)
|
|
|
|
shrinker_debugfs_remove(debugfs_entry, debugfs_id);
|
|
|
|
|
mm: shrinker: make global slab shrink lockless
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:41 -07:00
|
|
|
call_rcu(&shrinker->rcu, shrinker_free_rcu_cb);
|
mm: shrinker: add infrastructure for dynamically allocating shrinker
Patch series "use refcount+RCU method to implement lockless slab shrink",
v6.
1. Background
=============
We used to implement the lockless slab shrink with SRCU [1], but then kernel
test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test
case [2], so we reverted it [3].
This patch series aims to re-implement the lockless slab shrink using the
refcount+RCU method proposed by Dave Chinner [4].
[1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
2. Implementation
=================
Currently, the shrinker instances can be divided into the following three types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such as
mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b, the
memory of shrinker instance will be freed after synchronize_rcu() when the
module is unloaded. For case c, the memory of shrinker instance will be freed
along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to dynamically
allocate those shrinker instances in case c, then the memory can be dynamically
freed alone by calling kfree_rcu().
This patchset adds the following new APIs for dynamically allocating shrinker,
and add a private_data field to struct shrinker to record and get the original
embedded structure.
1. shrinker_alloc()
2. shrinker_register()
3. shrinker_free()
In order to simplify shrinker-related APIs and make shrinker more independent of
other kernel mechanisms, this patchset uses the above APIs to convert all
shrinkers (including case a and b) to dynamically allocated, and then remove all
existing APIs. This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing out of tree
code and third party modules using the old API and will no longer work with a
kernel using lockless slab shrinkers. They need to break (both at the source and
binary levels) to stop bad things from happening due to using uncoverted
shrinkers in the new setup.
```
Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}()
to ensure that the shrinker instance is valid. And the shrinker::refcount
mechanism ensures that the shrinker instance will not be run again after
unregistration. So the structure that records the pointer of shrinker instance
can be safely freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to be
blocked in unregister_shrinker() to wait RCU read-side critical section.
PATCH 1: introduce new APIs
PATCH 2~38: convert all shrinnkers to use new APIs
PATCH 39: remove old APIs
PATCH 40~41: some cleanups and preparations
PATCH 42-43: implement the lockless slab shrink
PATCH 44~45: convert shrinker_rwsem to mutex
3. Testing
==========
3.1 slab shrink stress test
---------------------------
We can reproduce the down_read_trylock() hotspot through the following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what we
expect.
3.2 registration and unregistration stress test
-----------------------------------------------
Run the command below to test:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
This patch (of 45):
Currently, the shrinker instances can be divided into the following three
types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such
as mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b,
the memory of shrinker instance will be freed after synchronize_rcu() when
the module is unloaded. For case c, the memory of shrinker instance will
be freed along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to
dynamically allocate those shrinker instances in case c, then the memory
can be dynamically freed alone by calling kfree_rcu().
So this commit adds the following new APIs for dynamically allocating
shrinker, and add a private_data field to struct shrinker to record and
get the original embedded structure.
1. shrinker_alloc()
Used to allocate shrinker instance itself and related memory, it will
return a pointer to the shrinker instance on success and NULL on failure.
2. shrinker_register()
Used to register the shrinker instance, which is same as the current
register_shrinker_prepared().
3. shrinker_free()
Used to unregister (if needed) and free the shrinker instance.
In order to simplify shrinker-related APIs and make shrinker more
independent of other kernel mechanisms, subsequent submissions will use
the above API to convert all shrinkers (including case a and b) to
dynamically allocated, and then remove all existing APIs.
This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing
out of tree code and third party modules using the old API and will
no longer work with a kernel using lockless slab shrinkers. They
need to break (both at the source and binary levels) to stop bad
things from happening due to using unconverted shrinkers in the new
setup.
```
[zhengqi.arch@bytedance.com: mm: shrinker: some cleanup]
Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 02:44:00 -07:00
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(shrinker_free);
|