1
linux/kernel/trace/rv/rv.h

69 lines
1.5 KiB
C
Raw Normal View History

rv: Add Runtime Verification (RV) interface RV is a lightweight (yet rigorous) method that complements classical exhaustive verification techniques (such as model checking and theorem proving) with a more practical approach to complex systems. RV works by analyzing the trace of the system's actual execution, comparing it against a formal specification of the system behavior. RV can give precise information on the runtime behavior of the monitored system while enabling the reaction for unexpected events, avoiding, for example, the propagation of a failure on safety-critical systems. The development of this interface roots in the development of the paper: De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva. Efficient formal verification for the Linux kernel. In: International Conference on Software Engineering and Formal Methods. Springer, Cham, 2019. p. 315-332. And: De Oliveira, Daniel Bristot. Automata-based formal analysis and verification of the real-time Linux kernel. PhD Thesis, 2020. The RV interface resembles the tracing/ interface on purpose. The current path for the RV interface is /sys/kernel/tracing/rv/. It presents these files: "available_monitors" - List the available monitors, one per line. For example: # cat available_monitors wip wwnr "enabled_monitors" - Lists the enabled monitors, one per line; - Writing to it enables a given monitor; - Writing a monitor name with a '!' prefix disables it; - Truncating the file disables all enabled monitors. For example: # cat enabled_monitors # echo wip > enabled_monitors # echo wwnr >> enabled_monitors # cat enabled_monitors wip wwnr # echo '!wip' >> enabled_monitors # cat enabled_monitors wwnr # echo > enabled_monitors # cat enabled_monitors # Note that more than one monitor can be enabled concurrently. "monitoring_on" - It is an on/off general switcher for monitoring. Note that it does not disable enabled monitors or detach events, but stop the per-entity monitors of monitoring the events received from the system. It resembles the "tracing_on" switcher. "monitors/" Each monitor will have its one directory inside "monitors/". There the monitor specific files will be presented. The "monitors/" directory resembles the "events" directory on tracefs. For example: # cd monitors/wip/ # ls desc enable # cat desc wakeup in preemptive per-cpu testing monitor. # cat enable 0 For further information, see the comments in the header of kernel/trace/rv/rv.c from this patch. Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 02:38:40 -07:00
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/mutex.h>
struct rv_interface {
struct dentry *root_dir;
struct dentry *monitors_dir;
};
#include "../trace.h"
#include <linux/tracefs.h>
#include <linux/rv.h>
#define RV_MODE_WRITE TRACE_MODE_WRITE
#define RV_MODE_READ TRACE_MODE_READ
#define rv_create_dir tracefs_create_dir
#define rv_create_file tracefs_create_file
#define rv_remove tracefs_remove
#define MAX_RV_MONITOR_NAME_SIZE 32
rv: Add runtime reactors interface A runtime monitor can cause a reaction to the detection of an exception on the model's execution. By default, the monitors have tracing reactions, printing the monitor output via tracepoints. But other reactions can be added (on-demand) via this interface. The user interface resembles the kernel tracing interface and presents these files: "available_reactors" - Reading shows the available reactors, one per line. For example: # cat available_reactors nop panic printk "reacting_on" - It is an on/off general switch for reactors, disabling all reactions. "monitors/MONITOR/reactors" - List available reactors, with the select reaction for the given MONITOR inside []. The default one is the nop (no operation) reactor. - Writing the name of a reactor enables it to the given MONITOR. For example: # cat monitors/wip/reactors [nop] panic printk # echo panic > monitors/wip/reactors # cat monitors/wip/reactors nop [panic] printk Link: https://lkml.kernel.org/r/1794eb994637457bdeaa6bad0b8263d2f7eece0c.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 02:38:41 -07:00
#define MAX_RV_REACTOR_NAME_SIZE 32
rv: Add Runtime Verification (RV) interface RV is a lightweight (yet rigorous) method that complements classical exhaustive verification techniques (such as model checking and theorem proving) with a more practical approach to complex systems. RV works by analyzing the trace of the system's actual execution, comparing it against a formal specification of the system behavior. RV can give precise information on the runtime behavior of the monitored system while enabling the reaction for unexpected events, avoiding, for example, the propagation of a failure on safety-critical systems. The development of this interface roots in the development of the paper: De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva. Efficient formal verification for the Linux kernel. In: International Conference on Software Engineering and Formal Methods. Springer, Cham, 2019. p. 315-332. And: De Oliveira, Daniel Bristot. Automata-based formal analysis and verification of the real-time Linux kernel. PhD Thesis, 2020. The RV interface resembles the tracing/ interface on purpose. The current path for the RV interface is /sys/kernel/tracing/rv/. It presents these files: "available_monitors" - List the available monitors, one per line. For example: # cat available_monitors wip wwnr "enabled_monitors" - Lists the enabled monitors, one per line; - Writing to it enables a given monitor; - Writing a monitor name with a '!' prefix disables it; - Truncating the file disables all enabled monitors. For example: # cat enabled_monitors # echo wip > enabled_monitors # echo wwnr >> enabled_monitors # cat enabled_monitors wip wwnr # echo '!wip' >> enabled_monitors # cat enabled_monitors wwnr # echo > enabled_monitors # cat enabled_monitors # Note that more than one monitor can be enabled concurrently. "monitoring_on" - It is an on/off general switcher for monitoring. Note that it does not disable enabled monitors or detach events, but stop the per-entity monitors of monitoring the events received from the system. It resembles the "tracing_on" switcher. "monitors/" Each monitor will have its one directory inside "monitors/". There the monitor specific files will be presented. The "monitors/" directory resembles the "events" directory on tracefs. For example: # cd monitors/wip/ # ls desc enable # cat desc wakeup in preemptive per-cpu testing monitor. # cat enable 0 For further information, see the comments in the header of kernel/trace/rv/rv.c from this patch. Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 02:38:40 -07:00
extern struct mutex rv_interface_lock;
rv: Add runtime reactors interface A runtime monitor can cause a reaction to the detection of an exception on the model's execution. By default, the monitors have tracing reactions, printing the monitor output via tracepoints. But other reactions can be added (on-demand) via this interface. The user interface resembles the kernel tracing interface and presents these files: "available_reactors" - Reading shows the available reactors, one per line. For example: # cat available_reactors nop panic printk "reacting_on" - It is an on/off general switch for reactors, disabling all reactions. "monitors/MONITOR/reactors" - List available reactors, with the select reaction for the given MONITOR inside []. The default one is the nop (no operation) reactor. - Writing the name of a reactor enables it to the given MONITOR. For example: # cat monitors/wip/reactors [nop] panic printk # echo panic > monitors/wip/reactors # cat monitors/wip/reactors nop [panic] printk Link: https://lkml.kernel.org/r/1794eb994637457bdeaa6bad0b8263d2f7eece0c.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 02:38:41 -07:00
#ifdef CONFIG_RV_REACTORS
struct rv_reactor_def {
struct list_head list;
struct rv_reactor *reactor;
/* protected by the monitor interface lock */
int counter;
};
#endif
rv: Add Runtime Verification (RV) interface RV is a lightweight (yet rigorous) method that complements classical exhaustive verification techniques (such as model checking and theorem proving) with a more practical approach to complex systems. RV works by analyzing the trace of the system's actual execution, comparing it against a formal specification of the system behavior. RV can give precise information on the runtime behavior of the monitored system while enabling the reaction for unexpected events, avoiding, for example, the propagation of a failure on safety-critical systems. The development of this interface roots in the development of the paper: De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva. Efficient formal verification for the Linux kernel. In: International Conference on Software Engineering and Formal Methods. Springer, Cham, 2019. p. 315-332. And: De Oliveira, Daniel Bristot. Automata-based formal analysis and verification of the real-time Linux kernel. PhD Thesis, 2020. The RV interface resembles the tracing/ interface on purpose. The current path for the RV interface is /sys/kernel/tracing/rv/. It presents these files: "available_monitors" - List the available monitors, one per line. For example: # cat available_monitors wip wwnr "enabled_monitors" - Lists the enabled monitors, one per line; - Writing to it enables a given monitor; - Writing a monitor name with a '!' prefix disables it; - Truncating the file disables all enabled monitors. For example: # cat enabled_monitors # echo wip > enabled_monitors # echo wwnr >> enabled_monitors # cat enabled_monitors wip wwnr # echo '!wip' >> enabled_monitors # cat enabled_monitors wwnr # echo > enabled_monitors # cat enabled_monitors # Note that more than one monitor can be enabled concurrently. "monitoring_on" - It is an on/off general switcher for monitoring. Note that it does not disable enabled monitors or detach events, but stop the per-entity monitors of monitoring the events received from the system. It resembles the "tracing_on" switcher. "monitors/" Each monitor will have its one directory inside "monitors/". There the monitor specific files will be presented. The "monitors/" directory resembles the "events" directory on tracefs. For example: # cd monitors/wip/ # ls desc enable # cat desc wakeup in preemptive per-cpu testing monitor. # cat enable 0 For further information, see the comments in the header of kernel/trace/rv/rv.c from this patch. Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 02:38:40 -07:00
struct rv_monitor_def {
struct list_head list;
struct rv_monitor *monitor;
struct dentry *root_d;
rv: Add runtime reactors interface A runtime monitor can cause a reaction to the detection of an exception on the model's execution. By default, the monitors have tracing reactions, printing the monitor output via tracepoints. But other reactions can be added (on-demand) via this interface. The user interface resembles the kernel tracing interface and presents these files: "available_reactors" - Reading shows the available reactors, one per line. For example: # cat available_reactors nop panic printk "reacting_on" - It is an on/off general switch for reactors, disabling all reactions. "monitors/MONITOR/reactors" - List available reactors, with the select reaction for the given MONITOR inside []. The default one is the nop (no operation) reactor. - Writing the name of a reactor enables it to the given MONITOR. For example: # cat monitors/wip/reactors [nop] panic printk # echo panic > monitors/wip/reactors # cat monitors/wip/reactors nop [panic] printk Link: https://lkml.kernel.org/r/1794eb994637457bdeaa6bad0b8263d2f7eece0c.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 02:38:41 -07:00
#ifdef CONFIG_RV_REACTORS
struct rv_reactor_def *rdef;
bool reacting;
#endif
rv: Add Runtime Verification (RV) interface RV is a lightweight (yet rigorous) method that complements classical exhaustive verification techniques (such as model checking and theorem proving) with a more practical approach to complex systems. RV works by analyzing the trace of the system's actual execution, comparing it against a formal specification of the system behavior. RV can give precise information on the runtime behavior of the monitored system while enabling the reaction for unexpected events, avoiding, for example, the propagation of a failure on safety-critical systems. The development of this interface roots in the development of the paper: De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva. Efficient formal verification for the Linux kernel. In: International Conference on Software Engineering and Formal Methods. Springer, Cham, 2019. p. 315-332. And: De Oliveira, Daniel Bristot. Automata-based formal analysis and verification of the real-time Linux kernel. PhD Thesis, 2020. The RV interface resembles the tracing/ interface on purpose. The current path for the RV interface is /sys/kernel/tracing/rv/. It presents these files: "available_monitors" - List the available monitors, one per line. For example: # cat available_monitors wip wwnr "enabled_monitors" - Lists the enabled monitors, one per line; - Writing to it enables a given monitor; - Writing a monitor name with a '!' prefix disables it; - Truncating the file disables all enabled monitors. For example: # cat enabled_monitors # echo wip > enabled_monitors # echo wwnr >> enabled_monitors # cat enabled_monitors wip wwnr # echo '!wip' >> enabled_monitors # cat enabled_monitors wwnr # echo > enabled_monitors # cat enabled_monitors # Note that more than one monitor can be enabled concurrently. "monitoring_on" - It is an on/off general switcher for monitoring. Note that it does not disable enabled monitors or detach events, but stop the per-entity monitors of monitoring the events received from the system. It resembles the "tracing_on" switcher. "monitors/" Each monitor will have its one directory inside "monitors/". There the monitor specific files will be presented. The "monitors/" directory resembles the "events" directory on tracefs. For example: # cd monitors/wip/ # ls desc enable # cat desc wakeup in preemptive per-cpu testing monitor. # cat enable 0 For further information, see the comments in the header of kernel/trace/rv/rv.c from this patch. Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 02:38:40 -07:00
bool task_monitor;
};
struct dentry *get_monitors_root(void);
int rv_disable_monitor(struct rv_monitor_def *mdef);
int rv_enable_monitor(struct rv_monitor_def *mdef);
rv: Add runtime reactors interface A runtime monitor can cause a reaction to the detection of an exception on the model's execution. By default, the monitors have tracing reactions, printing the monitor output via tracepoints. But other reactions can be added (on-demand) via this interface. The user interface resembles the kernel tracing interface and presents these files: "available_reactors" - Reading shows the available reactors, one per line. For example: # cat available_reactors nop panic printk "reacting_on" - It is an on/off general switch for reactors, disabling all reactions. "monitors/MONITOR/reactors" - List available reactors, with the select reaction for the given MONITOR inside []. The default one is the nop (no operation) reactor. - Writing the name of a reactor enables it to the given MONITOR. For example: # cat monitors/wip/reactors [nop] panic printk # echo panic > monitors/wip/reactors # cat monitors/wip/reactors nop [panic] printk Link: https://lkml.kernel.org/r/1794eb994637457bdeaa6bad0b8263d2f7eece0c.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29 02:38:41 -07:00
#ifdef CONFIG_RV_REACTORS
int reactor_populate_monitor(struct rv_monitor_def *mdef);
void reactor_cleanup_monitor(struct rv_monitor_def *mdef);
int init_rv_reactors(struct dentry *root_dir);
#else
static inline int reactor_populate_monitor(struct rv_monitor_def *mdef)
{
return 0;
}
static inline void reactor_cleanup_monitor(struct rv_monitor_def *mdef)
{
return;
}
static inline int init_rv_reactors(struct dentry *root_dir)
{
return 0;
}
#endif