1
linux/kernel/sched/cpuacct.c

364 lines
8.1 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 07:07:57 -07:00
// SPDX-License-Identifier: GPL-2.0
/*
* CPU accounting code for task groups.
*
* Based on the work by Paul Menage (menage@google.com) and Balbir Singh
* (balbir@in.ibm.com).
*/
/* Time spent by the tasks of the CPU accounting group executing in ... */
enum cpuacct_stat_index {
CPUACCT_STAT_USER, /* ... user mode */
CPUACCT_STAT_SYSTEM, /* ... kernel mode */
CPUACCT_STAT_NSTATS,
};
static const char * const cpuacct_stat_desc[] = {
[CPUACCT_STAT_USER] = "user",
[CPUACCT_STAT_SYSTEM] = "system",
};
/* track CPU usage of a group of tasks and its child groups */
struct cpuacct {
struct cgroup_subsys_state css;
/* cpuusage holds pointer to a u64-type object on every CPU */
sched/cpuacct: Fix user/system in shown cpuacct.usage* cpuacct has 2 different ways of accounting and showing user and system times. The first one uses cpuacct_account_field() to account times and cpuacct.stat file to expose them. And this one seems to work ok. The second one is uses cpuacct_charge() function for accounting and set of cpuacct.usage* files to show times. Despite some attempts to fix it in the past it still doesn't work. Sometimes while running KVM guest the cpuacct_charge() accounts most of the guest time as system time. This doesn't match with user&system times shown in cpuacct.stat or proc/<pid>/stat. Demonstration: # git clone https://github.com/aryabinin/kvmsample # make # mkdir /sys/fs/cgroup/cpuacct/test # echo $$ > /sys/fs/cgroup/cpuacct/test/tasks # ./kvmsample & # for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done 1976535645 2979839428 3979832704 4983603153 5983604157 Use cpustats accounted in cpuacct_account_field() as the source of user/sys times for cpuacct.usage* files. Make cpuacct_charge() to account only summary execution time. Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
2021-11-15 09:46:06 -07:00
u64 __percpu *cpuusage;
struct kernel_cpustat __percpu *cpustat;
};
static inline struct cpuacct *css_ca(struct cgroup_subsys_state *css)
{
return css ? container_of(css, struct cpuacct, css) : NULL;
}
/* Return CPU accounting group to which this task belongs */
static inline struct cpuacct *task_ca(struct task_struct *tsk)
{
cgroup: clean up cgroup_subsys names and initialization cgroup_subsys is a bit messier than it needs to be. * The name of a subsys can be different from its internal identifier defined in cgroup_subsys.h. Most subsystems use the matching name but three - cpu, memory and perf_event - use different ones. * cgroup_subsys_id enums are postfixed with _subsys_id and each cgroup_subsys is postfixed with _subsys. cgroup.h is widely included throughout various subsystems, it doesn't and shouldn't have claim on such generic names which don't have any qualifier indicating that they belong to cgroup. * cgroup_subsys->subsys_id should always equal the matching cgroup_subsys_id enum; however, we require each controller to initialize it and then BUG if they don't match, which is a bit silly. This patch cleans up cgroup_subsys names and initialization by doing the followings. * cgroup_subsys_id enums are now postfixed with _cgrp_id, and each cgroup_subsys with _cgrp_subsys. * With the above, renaming subsys identifiers to match the userland visible names doesn't cause any naming conflicts. All non-matching identifiers are renamed to match the official names. cpu_cgroup -> cpu mem_cgroup -> memory perf -> perf_event * controllers no longer need to initialize ->subsys_id and ->name. They're generated in cgroup core and set automatically during boot. * Redundant cgroup_subsys declarations removed. * While updating BUG_ON()s in cgroup_init_early(), convert them to WARN()s. BUGging that early during boot is stupid - the kernel can't print anything, even through serial console and the trap handler doesn't even link stack frame properly for back-tracing. This patch doesn't introduce any behavior changes. v2: Rebased on top of fe1217c4f3f7 ("net: net_cls: move cgroupfs classid handling into core"). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: "David S. Miller" <davem@davemloft.net> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Ingo Molnar <mingo@redhat.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Thomas Graf <tgraf@suug.ch>
2014-02-08 08:36:58 -07:00
return css_ca(task_css(tsk, cpuacct_cgrp_id));
}
static inline struct cpuacct *parent_ca(struct cpuacct *ca)
{
return css_ca(ca->css.parent);
}
sched/cpuacct: Fix user/system in shown cpuacct.usage* cpuacct has 2 different ways of accounting and showing user and system times. The first one uses cpuacct_account_field() to account times and cpuacct.stat file to expose them. And this one seems to work ok. The second one is uses cpuacct_charge() function for accounting and set of cpuacct.usage* files to show times. Despite some attempts to fix it in the past it still doesn't work. Sometimes while running KVM guest the cpuacct_charge() accounts most of the guest time as system time. This doesn't match with user&system times shown in cpuacct.stat or proc/<pid>/stat. Demonstration: # git clone https://github.com/aryabinin/kvmsample # make # mkdir /sys/fs/cgroup/cpuacct/test # echo $$ > /sys/fs/cgroup/cpuacct/test/tasks # ./kvmsample & # for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done 1976535645 2979839428 3979832704 4983603153 5983604157 Use cpustats accounted in cpuacct_account_field() as the source of user/sys times for cpuacct.usage* files. Make cpuacct_charge() to account only summary execution time. Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
2021-11-15 09:46:06 -07:00
static DEFINE_PER_CPU(u64, root_cpuacct_cpuusage);
static struct cpuacct root_cpuacct = {
.cpustat = &kernel_cpustat,
.cpuusage = &root_cpuacct_cpuusage,
};
/* Create a new CPU accounting group */
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-08 17:11:23 -07:00
static struct cgroup_subsys_state *
cpuacct_css_alloc(struct cgroup_subsys_state *parent_css)
{
struct cpuacct *ca;
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-08 17:11:23 -07:00
if (!parent_css)
return &root_cpuacct.css;
ca = kzalloc(sizeof(*ca), GFP_KERNEL);
if (!ca)
goto out;
sched/cpuacct: Fix user/system in shown cpuacct.usage* cpuacct has 2 different ways of accounting and showing user and system times. The first one uses cpuacct_account_field() to account times and cpuacct.stat file to expose them. And this one seems to work ok. The second one is uses cpuacct_charge() function for accounting and set of cpuacct.usage* files to show times. Despite some attempts to fix it in the past it still doesn't work. Sometimes while running KVM guest the cpuacct_charge() accounts most of the guest time as system time. This doesn't match with user&system times shown in cpuacct.stat or proc/<pid>/stat. Demonstration: # git clone https://github.com/aryabinin/kvmsample # make # mkdir /sys/fs/cgroup/cpuacct/test # echo $$ > /sys/fs/cgroup/cpuacct/test/tasks # ./kvmsample & # for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done 1976535645 2979839428 3979832704 4983603153 5983604157 Use cpustats accounted in cpuacct_account_field() as the source of user/sys times for cpuacct.usage* files. Make cpuacct_charge() to account only summary execution time. Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
2021-11-15 09:46:06 -07:00
ca->cpuusage = alloc_percpu(u64);
if (!ca->cpuusage)
goto out_free_ca;
ca->cpustat = alloc_percpu(struct kernel_cpustat);
if (!ca->cpustat)
goto out_free_cpuusage;
return &ca->css;
out_free_cpuusage:
free_percpu(ca->cpuusage);
out_free_ca:
kfree(ca);
out:
return ERR_PTR(-ENOMEM);
}
/* Destroy an existing CPU accounting group */
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-08 17:11:23 -07:00
static void cpuacct_css_free(struct cgroup_subsys_state *css)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-08 17:11:23 -07:00
struct cpuacct *ca = css_ca(css);
free_percpu(ca->cpustat);
free_percpu(ca->cpuusage);
kfree(ca);
}
static u64 cpuacct_cpuusage_read(struct cpuacct *ca, int cpu,
enum cpuacct_stat_index index)
{
sched/cpuacct: Fix user/system in shown cpuacct.usage* cpuacct has 2 different ways of accounting and showing user and system times. The first one uses cpuacct_account_field() to account times and cpuacct.stat file to expose them. And this one seems to work ok. The second one is uses cpuacct_charge() function for accounting and set of cpuacct.usage* files to show times. Despite some attempts to fix it in the past it still doesn't work. Sometimes while running KVM guest the cpuacct_charge() accounts most of the guest time as system time. This doesn't match with user&system times shown in cpuacct.stat or proc/<pid>/stat. Demonstration: # git clone https://github.com/aryabinin/kvmsample # make # mkdir /sys/fs/cgroup/cpuacct/test # echo $$ > /sys/fs/cgroup/cpuacct/test/tasks # ./kvmsample & # for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done 1976535645 2979839428 3979832704 4983603153 5983604157 Use cpustats accounted in cpuacct_account_field() as the source of user/sys times for cpuacct.usage* files. Make cpuacct_charge() to account only summary execution time. Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
2021-11-15 09:46:06 -07:00
u64 *cpuusage = per_cpu_ptr(ca->cpuusage, cpu);
u64 *cpustat = per_cpu_ptr(ca->cpustat, cpu)->cpustat;
u64 data;
/*
* We allow index == CPUACCT_STAT_NSTATS here to read
* the sum of usages.
*/
if (WARN_ON_ONCE(index > CPUACCT_STAT_NSTATS))
return 0;
#ifndef CONFIG_64BIT
/*
* Take rq->lock to make 64-bit read safe on 32-bit platforms.
*/
raw_spin_rq_lock_irq(cpu_rq(cpu));
#endif
sched/cpuacct: Fix user/system in shown cpuacct.usage* cpuacct has 2 different ways of accounting and showing user and system times. The first one uses cpuacct_account_field() to account times and cpuacct.stat file to expose them. And this one seems to work ok. The second one is uses cpuacct_charge() function for accounting and set of cpuacct.usage* files to show times. Despite some attempts to fix it in the past it still doesn't work. Sometimes while running KVM guest the cpuacct_charge() accounts most of the guest time as system time. This doesn't match with user&system times shown in cpuacct.stat or proc/<pid>/stat. Demonstration: # git clone https://github.com/aryabinin/kvmsample # make # mkdir /sys/fs/cgroup/cpuacct/test # echo $$ > /sys/fs/cgroup/cpuacct/test/tasks # ./kvmsample & # for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done 1976535645 2979839428 3979832704 4983603153 5983604157 Use cpustats accounted in cpuacct_account_field() as the source of user/sys times for cpuacct.usage* files. Make cpuacct_charge() to account only summary execution time. Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
2021-11-15 09:46:06 -07:00
switch (index) {
case CPUACCT_STAT_USER:
data = cpustat[CPUTIME_USER] + cpustat[CPUTIME_NICE];
break;
case CPUACCT_STAT_SYSTEM:
data = cpustat[CPUTIME_SYSTEM] + cpustat[CPUTIME_IRQ] +
cpustat[CPUTIME_SOFTIRQ];
break;
case CPUACCT_STAT_NSTATS:
data = *cpuusage;
break;
}
#ifndef CONFIG_64BIT
raw_spin_rq_unlock_irq(cpu_rq(cpu));
#endif
return data;
}
sched/cpuacct: Fix user/system in shown cpuacct.usage* cpuacct has 2 different ways of accounting and showing user and system times. The first one uses cpuacct_account_field() to account times and cpuacct.stat file to expose them. And this one seems to work ok. The second one is uses cpuacct_charge() function for accounting and set of cpuacct.usage* files to show times. Despite some attempts to fix it in the past it still doesn't work. Sometimes while running KVM guest the cpuacct_charge() accounts most of the guest time as system time. This doesn't match with user&system times shown in cpuacct.stat or proc/<pid>/stat. Demonstration: # git clone https://github.com/aryabinin/kvmsample # make # mkdir /sys/fs/cgroup/cpuacct/test # echo $$ > /sys/fs/cgroup/cpuacct/test/tasks # ./kvmsample & # for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done 1976535645 2979839428 3979832704 4983603153 5983604157 Use cpustats accounted in cpuacct_account_field() as the source of user/sys times for cpuacct.usage* files. Make cpuacct_charge() to account only summary execution time. Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
2021-11-15 09:46:06 -07:00
static void cpuacct_cpuusage_write(struct cpuacct *ca, int cpu)
{
sched/cpuacct: Fix user/system in shown cpuacct.usage* cpuacct has 2 different ways of accounting and showing user and system times. The first one uses cpuacct_account_field() to account times and cpuacct.stat file to expose them. And this one seems to work ok. The second one is uses cpuacct_charge() function for accounting and set of cpuacct.usage* files to show times. Despite some attempts to fix it in the past it still doesn't work. Sometimes while running KVM guest the cpuacct_charge() accounts most of the guest time as system time. This doesn't match with user&system times shown in cpuacct.stat or proc/<pid>/stat. Demonstration: # git clone https://github.com/aryabinin/kvmsample # make # mkdir /sys/fs/cgroup/cpuacct/test # echo $$ > /sys/fs/cgroup/cpuacct/test/tasks # ./kvmsample & # for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done 1976535645 2979839428 3979832704 4983603153 5983604157 Use cpustats accounted in cpuacct_account_field() as the source of user/sys times for cpuacct.usage* files. Make cpuacct_charge() to account only summary execution time. Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
2021-11-15 09:46:06 -07:00
u64 *cpuusage = per_cpu_ptr(ca->cpuusage, cpu);
u64 *cpustat = per_cpu_ptr(ca->cpustat, cpu)->cpustat;
/* Don't allow to reset global kernel_cpustat */
if (ca == &root_cpuacct)
return;
#ifndef CONFIG_64BIT
/*
* Take rq->lock to make 64-bit write safe on 32-bit platforms.
*/
raw_spin_rq_lock_irq(cpu_rq(cpu));
#endif
sched/cpuacct: Fix user/system in shown cpuacct.usage* cpuacct has 2 different ways of accounting and showing user and system times. The first one uses cpuacct_account_field() to account times and cpuacct.stat file to expose them. And this one seems to work ok. The second one is uses cpuacct_charge() function for accounting and set of cpuacct.usage* files to show times. Despite some attempts to fix it in the past it still doesn't work. Sometimes while running KVM guest the cpuacct_charge() accounts most of the guest time as system time. This doesn't match with user&system times shown in cpuacct.stat or proc/<pid>/stat. Demonstration: # git clone https://github.com/aryabinin/kvmsample # make # mkdir /sys/fs/cgroup/cpuacct/test # echo $$ > /sys/fs/cgroup/cpuacct/test/tasks # ./kvmsample & # for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done 1976535645 2979839428 3979832704 4983603153 5983604157 Use cpustats accounted in cpuacct_account_field() as the source of user/sys times for cpuacct.usage* files. Make cpuacct_charge() to account only summary execution time. Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
2021-11-15 09:46:06 -07:00
*cpuusage = 0;
cpustat[CPUTIME_USER] = cpustat[CPUTIME_NICE] = 0;
cpustat[CPUTIME_SYSTEM] = cpustat[CPUTIME_IRQ] = 0;
cpustat[CPUTIME_SOFTIRQ] = 0;
#ifndef CONFIG_64BIT
raw_spin_rq_unlock_irq(cpu_rq(cpu));
#endif
}
/* Return total CPU usage (in nanoseconds) of a group */
static u64 __cpuusage_read(struct cgroup_subsys_state *css,
enum cpuacct_stat_index index)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-08 17:11:24 -07:00
struct cpuacct *ca = css_ca(css);
u64 totalcpuusage = 0;
int i;
for_each_possible_cpu(i)
totalcpuusage += cpuacct_cpuusage_read(ca, i, index);
return totalcpuusage;
}
static u64 cpuusage_user_read(struct cgroup_subsys_state *css,
struct cftype *cft)
{
return __cpuusage_read(css, CPUACCT_STAT_USER);
}
static u64 cpuusage_sys_read(struct cgroup_subsys_state *css,
struct cftype *cft)
{
return __cpuusage_read(css, CPUACCT_STAT_SYSTEM);
}
static u64 cpuusage_read(struct cgroup_subsys_state *css, struct cftype *cft)
{
return __cpuusage_read(css, CPUACCT_STAT_NSTATS);
}
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-08 17:11:24 -07:00
static int cpuusage_write(struct cgroup_subsys_state *css, struct cftype *cft,
u64 val)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-08 17:11:24 -07:00
struct cpuacct *ca = css_ca(css);
int cpu;
/*
* Only allow '0' here to do a reset.
*/
if (val)
return -EINVAL;
for_each_possible_cpu(cpu)
sched/cpuacct: Fix user/system in shown cpuacct.usage* cpuacct has 2 different ways of accounting and showing user and system times. The first one uses cpuacct_account_field() to account times and cpuacct.stat file to expose them. And this one seems to work ok. The second one is uses cpuacct_charge() function for accounting and set of cpuacct.usage* files to show times. Despite some attempts to fix it in the past it still doesn't work. Sometimes while running KVM guest the cpuacct_charge() accounts most of the guest time as system time. This doesn't match with user&system times shown in cpuacct.stat or proc/<pid>/stat. Demonstration: # git clone https://github.com/aryabinin/kvmsample # make # mkdir /sys/fs/cgroup/cpuacct/test # echo $$ > /sys/fs/cgroup/cpuacct/test/tasks # ./kvmsample & # for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done 1976535645 2979839428 3979832704 4983603153 5983604157 Use cpustats accounted in cpuacct_account_field() as the source of user/sys times for cpuacct.usage* files. Make cpuacct_charge() to account only summary execution time. Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
2021-11-15 09:46:06 -07:00
cpuacct_cpuusage_write(ca, cpu);
return 0;
}
static int __cpuacct_percpu_seq_show(struct seq_file *m,
enum cpuacct_stat_index index)
{
struct cpuacct *ca = css_ca(seq_css(m));
u64 percpu;
int i;
for_each_possible_cpu(i) {
percpu = cpuacct_cpuusage_read(ca, i, index);
seq_printf(m, "%llu ", (unsigned long long) percpu);
}
seq_printf(m, "\n");
return 0;
}
static int cpuacct_percpu_user_seq_show(struct seq_file *m, void *V)
{
return __cpuacct_percpu_seq_show(m, CPUACCT_STAT_USER);
}
static int cpuacct_percpu_sys_seq_show(struct seq_file *m, void *V)
{
return __cpuacct_percpu_seq_show(m, CPUACCT_STAT_SYSTEM);
}
static int cpuacct_percpu_seq_show(struct seq_file *m, void *V)
{
return __cpuacct_percpu_seq_show(m, CPUACCT_STAT_NSTATS);
}
static int cpuacct_all_seq_show(struct seq_file *m, void *V)
{
struct cpuacct *ca = css_ca(seq_css(m));
int index;
int cpu;
seq_puts(m, "cpu");
for (index = 0; index < CPUACCT_STAT_NSTATS; index++)
seq_printf(m, " %s", cpuacct_stat_desc[index]);
seq_puts(m, "\n");
for_each_possible_cpu(cpu) {
seq_printf(m, "%d", cpu);
sched/cpuacct: Fix user/system in shown cpuacct.usage* cpuacct has 2 different ways of accounting and showing user and system times. The first one uses cpuacct_account_field() to account times and cpuacct.stat file to expose them. And this one seems to work ok. The second one is uses cpuacct_charge() function for accounting and set of cpuacct.usage* files to show times. Despite some attempts to fix it in the past it still doesn't work. Sometimes while running KVM guest the cpuacct_charge() accounts most of the guest time as system time. This doesn't match with user&system times shown in cpuacct.stat or proc/<pid>/stat. Demonstration: # git clone https://github.com/aryabinin/kvmsample # make # mkdir /sys/fs/cgroup/cpuacct/test # echo $$ > /sys/fs/cgroup/cpuacct/test/tasks # ./kvmsample & # for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done 1976535645 2979839428 3979832704 4983603153 5983604157 Use cpustats accounted in cpuacct_account_field() as the source of user/sys times for cpuacct.usage* files. Make cpuacct_charge() to account only summary execution time. Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
2021-11-15 09:46:06 -07:00
for (index = 0; index < CPUACCT_STAT_NSTATS; index++)
seq_printf(m, " %llu",
cpuacct_cpuusage_read(ca, cpu, index));
seq_puts(m, "\n");
}
return 0;
}
static int cpuacct_stats_show(struct seq_file *sf, void *v)
{
struct cpuacct *ca = css_ca(seq_css(sf));
struct task_cputime cputime;
u64 val[CPUACCT_STAT_NSTATS];
int cpu;
int stat;
memset(&cputime, 0, sizeof(cputime));
for_each_possible_cpu(cpu) {
u64 *cpustat = per_cpu_ptr(ca->cpustat, cpu)->cpustat;
cputime.utime += cpustat[CPUTIME_USER];
cputime.utime += cpustat[CPUTIME_NICE];
cputime.stime += cpustat[CPUTIME_SYSTEM];
cputime.stime += cpustat[CPUTIME_IRQ];
cputime.stime += cpustat[CPUTIME_SOFTIRQ];
cputime.sum_exec_runtime += *per_cpu_ptr(ca->cpuusage, cpu);
}
cputime_adjust(&cputime, &seq_css(sf)->cgroup->prev_cputime,
&val[CPUACCT_STAT_USER], &val[CPUACCT_STAT_SYSTEM]);
for (stat = 0; stat < CPUACCT_STAT_NSTATS; stat++) {
seq_printf(sf, "%s %llu\n", cpuacct_stat_desc[stat],
nsec_to_clock_t(val[stat]));
}
return 0;
}
static struct cftype files[] = {
{
.name = "usage",
.read_u64 = cpuusage_read,
.write_u64 = cpuusage_write,
},
{
.name = "usage_user",
.read_u64 = cpuusage_user_read,
},
{
.name = "usage_sys",
.read_u64 = cpuusage_sys_read,
},
{
.name = "usage_percpu",
.seq_show = cpuacct_percpu_seq_show,
},
{
.name = "usage_percpu_user",
.seq_show = cpuacct_percpu_user_seq_show,
},
{
.name = "usage_percpu_sys",
.seq_show = cpuacct_percpu_sys_seq_show,
},
{
.name = "usage_all",
.seq_show = cpuacct_all_seq_show,
},
{
.name = "stat",
.seq_show = cpuacct_stats_show,
},
{ } /* terminate */
};
/*
* charge this task's execution time to its accounting group.
*
* called with rq->lock held.
*/
void cpuacct_charge(struct task_struct *tsk, u64 cputime)
{
unsigned int cpu = task_cpu(tsk);
struct cpuacct *ca;
lockdep_assert_rq_held(cpu_rq(cpu));
for (ca = task_ca(tsk); ca; ca = parent_ca(ca))
*per_cpu_ptr(ca->cpuusage, cpu) += cputime;
}
/*
* Add user/system time to cpuacct.
*
* Note: it's the caller that updates the account of the root cgroup.
*/
void cpuacct_account_field(struct task_struct *tsk, int index, u64 val)
{
struct cpuacct *ca;
for (ca = task_ca(tsk); ca != &root_cpuacct; ca = parent_ca(ca))
__this_cpu_add(ca->cpustat->cpustat[index], val);
}
cgroup: clean up cgroup_subsys names and initialization cgroup_subsys is a bit messier than it needs to be. * The name of a subsys can be different from its internal identifier defined in cgroup_subsys.h. Most subsystems use the matching name but three - cpu, memory and perf_event - use different ones. * cgroup_subsys_id enums are postfixed with _subsys_id and each cgroup_subsys is postfixed with _subsys. cgroup.h is widely included throughout various subsystems, it doesn't and shouldn't have claim on such generic names which don't have any qualifier indicating that they belong to cgroup. * cgroup_subsys->subsys_id should always equal the matching cgroup_subsys_id enum; however, we require each controller to initialize it and then BUG if they don't match, which is a bit silly. This patch cleans up cgroup_subsys names and initialization by doing the followings. * cgroup_subsys_id enums are now postfixed with _cgrp_id, and each cgroup_subsys with _cgrp_subsys. * With the above, renaming subsys identifiers to match the userland visible names doesn't cause any naming conflicts. All non-matching identifiers are renamed to match the official names. cpu_cgroup -> cpu mem_cgroup -> memory perf -> perf_event * controllers no longer need to initialize ->subsys_id and ->name. They're generated in cgroup core and set automatically during boot. * Redundant cgroup_subsys declarations removed. * While updating BUG_ON()s in cgroup_init_early(), convert them to WARN()s. BUGging that early during boot is stupid - the kernel can't print anything, even through serial console and the trap handler doesn't even link stack frame properly for back-tracing. This patch doesn't introduce any behavior changes. v2: Rebased on top of fe1217c4f3f7 ("net: net_cls: move cgroupfs classid handling into core"). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: "David S. Miller" <davem@davemloft.net> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Ingo Molnar <mingo@redhat.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Thomas Graf <tgraf@suug.ch>
2014-02-08 08:36:58 -07:00
struct cgroup_subsys cpuacct_cgrp_subsys = {
.css_alloc = cpuacct_css_alloc,
.css_free = cpuacct_css_free,
.legacy_cftypes = files,
.early_init = true,
};