1
linux/drivers/perf/hisilicon/hisi_uncore_pmu.h

138 lines
4.7 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* HiSilicon SoC Hardware event counters support
*
* Copyright (C) 2017 HiSilicon Limited
* Author: Anurup M <anurup.m@huawei.com>
* Shaokun Zhang <zhangshaokun@hisilicon.com>
*
* This code is based on the uncore PMUs like arm-cci and arm-ccn.
*/
#ifndef __HISI_UNCORE_PMU_H__
#define __HISI_UNCORE_PMU_H__
drivers/perf: hisi: Add new functions for L3C PMU On HiSilicon Hip09 platform, some new functions are enhanced on L3C PMU: * tt_req: it is the abbreviation of tracetag request and allows user to count only read/write/atomic operations. tt_req is 3-bit and details are listed in the hisi-pmu document. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5 * tt_core: it is the abbreviation of tracetag core and allows user to filter by core/thread within the cluster, it is a 8-bit bitmap that each bit represents the corresponding core/thread in this L3C. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0xf/ sleep 5 * datasrc_cfg: it is the abbreviation of data source configuration and allows user to check where the data comes from, such as: from local DDR, cross-die DDR or cross-socket DDR. Its is 5-bit and represents different data source in the SoC. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0xe/ sleep 5 * datasrc_skt: it is the abbreviation of data source from another socket and is used in the multi-chips, if user wants to check the cross-socket datat source, it shall be added in perf command. Only one bit is used to control this. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0x10,datasrc_skt=1/ sleep 5 Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Co-developed-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1615186237-22263-5-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-07 23:50:32 -07:00
#include <linux/bitfield.h>
#include <linux/cpumask.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/perf_event.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#undef pr_fmt
#define pr_fmt(fmt) "hisi_pmu: " fmt
drivers/perf: hisi: Add new functions for L3C PMU On HiSilicon Hip09 platform, some new functions are enhanced on L3C PMU: * tt_req: it is the abbreviation of tracetag request and allows user to count only read/write/atomic operations. tt_req is 3-bit and details are listed in the hisi-pmu document. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5 * tt_core: it is the abbreviation of tracetag core and allows user to filter by core/thread within the cluster, it is a 8-bit bitmap that each bit represents the corresponding core/thread in this L3C. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0xf/ sleep 5 * datasrc_cfg: it is the abbreviation of data source configuration and allows user to check where the data comes from, such as: from local DDR, cross-die DDR or cross-socket DDR. Its is 5-bit and represents different data source in the SoC. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0xe/ sleep 5 * datasrc_skt: it is the abbreviation of data source from another socket and is used in the multi-chips, if user wants to check the cross-socket datat source, it shall be added in perf command. Only one bit is used to control this. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0x10,datasrc_skt=1/ sleep 5 Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Co-developed-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1615186237-22263-5-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-07 23:50:32 -07:00
#define HISI_PMU_V2 0x30
#define HISI_MAX_COUNTERS 0x10
#define to_hisi_pmu(p) (container_of(p, struct hisi_pmu, pmu))
#define HISI_PMU_ATTR(_name, _func, _config) \
(&((struct dev_ext_attribute[]) { \
{ __ATTR(_name, 0444, _func, NULL), (void *)_config } \
})[0].attr.attr)
#define HISI_PMU_FORMAT_ATTR(_name, _config) \
HISI_PMU_ATTR(_name, device_show_string, _config)
#define HISI_PMU_EVENT_ATTR(_name, _config) \
HISI_PMU_ATTR(_name, hisi_event_sysfs_show, (unsigned long)_config)
drivers/perf: hisi: Add new functions for L3C PMU On HiSilicon Hip09 platform, some new functions are enhanced on L3C PMU: * tt_req: it is the abbreviation of tracetag request and allows user to count only read/write/atomic operations. tt_req is 3-bit and details are listed in the hisi-pmu document. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5 * tt_core: it is the abbreviation of tracetag core and allows user to filter by core/thread within the cluster, it is a 8-bit bitmap that each bit represents the corresponding core/thread in this L3C. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0xf/ sleep 5 * datasrc_cfg: it is the abbreviation of data source configuration and allows user to check where the data comes from, such as: from local DDR, cross-die DDR or cross-socket DDR. Its is 5-bit and represents different data source in the SoC. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0xe/ sleep 5 * datasrc_skt: it is the abbreviation of data source from another socket and is used in the multi-chips, if user wants to check the cross-socket datat source, it shall be added in perf command. Only one bit is used to control this. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0x10,datasrc_skt=1/ sleep 5 Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Co-developed-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1615186237-22263-5-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-07 23:50:32 -07:00
#define HISI_PMU_EVENT_ATTR_EXTRACTOR(name, config, hi, lo) \
static inline u32 hisi_get_##name(struct perf_event *event) \
{ \
return FIELD_GET(GENMASK_ULL(hi, lo), event->attr.config); \
}
#define HISI_GET_EVENTID(ev) (ev->hw.config_base & 0xff)
#define HISI_PMU_EVTYPE_BITS 8
#define HISI_PMU_EVTYPE_SHIFT(idx) ((idx) % 4 * HISI_PMU_EVTYPE_BITS)
struct hisi_pmu;
struct hisi_uncore_ops {
int (*check_filter)(struct perf_event *event);
void (*write_evtype)(struct hisi_pmu *, int, u32);
int (*get_event_idx)(struct perf_event *);
u64 (*read_counter)(struct hisi_pmu *, struct hw_perf_event *);
void (*write_counter)(struct hisi_pmu *, struct hw_perf_event *, u64);
void (*enable_counter)(struct hisi_pmu *, struct hw_perf_event *);
void (*disable_counter)(struct hisi_pmu *, struct hw_perf_event *);
void (*enable_counter_int)(struct hisi_pmu *, struct hw_perf_event *);
void (*disable_counter_int)(struct hisi_pmu *, struct hw_perf_event *);
void (*start_counters)(struct hisi_pmu *);
void (*stop_counters)(struct hisi_pmu *);
u32 (*get_int_status)(struct hisi_pmu *hisi_pmu);
void (*clear_int_status)(struct hisi_pmu *hisi_pmu, int idx);
drivers/perf: hisi: Add new functions for L3C PMU On HiSilicon Hip09 platform, some new functions are enhanced on L3C PMU: * tt_req: it is the abbreviation of tracetag request and allows user to count only read/write/atomic operations. tt_req is 3-bit and details are listed in the hisi-pmu document. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5 * tt_core: it is the abbreviation of tracetag core and allows user to filter by core/thread within the cluster, it is a 8-bit bitmap that each bit represents the corresponding core/thread in this L3C. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0xf/ sleep 5 * datasrc_cfg: it is the abbreviation of data source configuration and allows user to check where the data comes from, such as: from local DDR, cross-die DDR or cross-socket DDR. Its is 5-bit and represents different data source in the SoC. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0xe/ sleep 5 * datasrc_skt: it is the abbreviation of data source from another socket and is used in the multi-chips, if user wants to check the cross-socket datat source, it shall be added in perf command. Only one bit is used to control this. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0x10,datasrc_skt=1/ sleep 5 Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Co-developed-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1615186237-22263-5-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-07 23:50:32 -07:00
void (*enable_filter)(struct perf_event *event);
void (*disable_filter)(struct perf_event *event);
};
/* Describes the HISI PMU chip features information */
struct hisi_pmu_dev_info {
const char *name;
const struct attribute_group **attr_groups;
void *private;
};
struct hisi_pmu_hwevents {
struct perf_event *hw_events[HISI_MAX_COUNTERS];
DECLARE_BITMAP(used_mask, HISI_MAX_COUNTERS);
drivers/perf: hisi: Add new functions for L3C PMU On HiSilicon Hip09 platform, some new functions are enhanced on L3C PMU: * tt_req: it is the abbreviation of tracetag request and allows user to count only read/write/atomic operations. tt_req is 3-bit and details are listed in the hisi-pmu document. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5 * tt_core: it is the abbreviation of tracetag core and allows user to filter by core/thread within the cluster, it is a 8-bit bitmap that each bit represents the corresponding core/thread in this L3C. $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0xf/ sleep 5 * datasrc_cfg: it is the abbreviation of data source configuration and allows user to check where the data comes from, such as: from local DDR, cross-die DDR or cross-socket DDR. Its is 5-bit and represents different data source in the SoC. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0xe/ sleep 5 * datasrc_skt: it is the abbreviation of data source from another socket and is used in the multi-chips, if user wants to check the cross-socket datat source, it shall be added in perf command. Only one bit is used to control this. $# perf stat -a -e hisi_sccl3_l3c0/dat_access,datasrc_cfg=0x10,datasrc_skt=1/ sleep 5 Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Co-developed-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1615186237-22263-5-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2021-03-07 23:50:32 -07:00
const struct attribute_group **attr_groups;
};
/* Generic pmu struct for different pmu types */
struct hisi_pmu {
struct pmu pmu;
const struct hisi_uncore_ops *ops;
const struct hisi_pmu_dev_info *dev_info;
struct hisi_pmu_hwevents pmu_events;
/* associated_cpus: All CPUs associated with the PMU */
cpumask_t associated_cpus;
/* CPU used for counting */
int on_cpu;
int irq;
struct device *dev;
struct hlist_node node;
int sccl_id;
int sicl_id;
int ccl_id;
void __iomem *base;
/* the ID of the PMU modules */
u32 index_id;
/* For DDRC PMU v2: each DDRC has more than one DMC */
u32 sub_id;
int num_counters;
int counter_bits;
/* check event code range */
int check_event;
u32 identifier;
};
int hisi_uncore_pmu_get_event_idx(struct perf_event *event);
void hisi_uncore_pmu_read(struct perf_event *event);
int hisi_uncore_pmu_add(struct perf_event *event, int flags);
void hisi_uncore_pmu_del(struct perf_event *event, int flags);
void hisi_uncore_pmu_start(struct perf_event *event, int flags);
void hisi_uncore_pmu_stop(struct perf_event *event, int flags);
void hisi_uncore_pmu_set_event_period(struct perf_event *event);
void hisi_uncore_pmu_event_update(struct perf_event *event);
int hisi_uncore_pmu_event_init(struct perf_event *event);
void hisi_uncore_pmu_enable(struct pmu *pmu);
void hisi_uncore_pmu_disable(struct pmu *pmu);
ssize_t hisi_event_sysfs_show(struct device *dev,
struct device_attribute *attr, char *buf);
ssize_t hisi_cpumask_sysfs_show(struct device *dev,
struct device_attribute *attr, char *buf);
int hisi_uncore_pmu_online_cpu(unsigned int cpu, struct hlist_node *node);
int hisi_uncore_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node);
ssize_t hisi_uncore_pmu_identifier_attr_show(struct device *dev,
struct device_attribute *attr,
char *page);
int hisi_uncore_pmu_init_irq(struct hisi_pmu *hisi_pmu,
struct platform_device *pdev);
void hisi_pmu_init(struct hisi_pmu *hisi_pmu, struct module *module);
#endif /* __HISI_UNCORE_PMU_H__ */