1
linux/drivers/media/i2c/adv748x/adv748x-afe.c

557 lines
13 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for Analog Devices ADV748X 8 channel analog front end (AFE) receiver
* with standard definition processor (SDP)
*
* Copyright (C) 2017 Renesas Electronics Corp.
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/v4l2-dv-timings.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-dv-timings.h>
#include <media/v4l2-ioctl.h>
#include "adv748x.h"
/* -----------------------------------------------------------------------------
* SDP
*/
#define ADV748X_AFE_STD_AD_PAL_BG_NTSC_J_SECAM 0x0
#define ADV748X_AFE_STD_AD_PAL_BG_NTSC_J_SECAM_PED 0x1
#define ADV748X_AFE_STD_AD_PAL_N_NTSC_J_SECAM 0x2
#define ADV748X_AFE_STD_AD_PAL_N_NTSC_M_SECAM 0x3
#define ADV748X_AFE_STD_NTSC_J 0x4
#define ADV748X_AFE_STD_NTSC_M 0x5
#define ADV748X_AFE_STD_PAL60 0x6
#define ADV748X_AFE_STD_NTSC_443 0x7
#define ADV748X_AFE_STD_PAL_BG 0x8
#define ADV748X_AFE_STD_PAL_N 0x9
#define ADV748X_AFE_STD_PAL_M 0xa
#define ADV748X_AFE_STD_PAL_M_PED 0xb
#define ADV748X_AFE_STD_PAL_COMB_N 0xc
#define ADV748X_AFE_STD_PAL_COMB_N_PED 0xd
#define ADV748X_AFE_STD_PAL_SECAM 0xe
#define ADV748X_AFE_STD_PAL_SECAM_PED 0xf
static int adv748x_afe_read_ro_map(struct adv748x_state *state, u8 reg)
{
int ret;
/* Select SDP Read-Only Main Map */
ret = sdp_write(state, ADV748X_SDP_MAP_SEL,
ADV748X_SDP_MAP_SEL_RO_MAIN);
if (ret < 0)
return ret;
return sdp_read(state, reg);
}
static int adv748x_afe_status(struct adv748x_afe *afe, u32 *signal,
v4l2_std_id *std)
{
struct adv748x_state *state = adv748x_afe_to_state(afe);
int info;
/* Read status from reg 0x10 of SDP RO Map */
info = adv748x_afe_read_ro_map(state, ADV748X_SDP_RO_10);
if (info < 0)
return info;
if (signal)
*signal = info & ADV748X_SDP_RO_10_IN_LOCK ?
0 : V4L2_IN_ST_NO_SIGNAL;
if (!std)
return 0;
/* Standard not valid if there is no signal */
if (!(info & ADV748X_SDP_RO_10_IN_LOCK)) {
*std = V4L2_STD_UNKNOWN;
return 0;
}
switch (info & 0x70) {
case 0x00:
*std = V4L2_STD_NTSC;
break;
case 0x10:
*std = V4L2_STD_NTSC_443;
break;
case 0x20:
*std = V4L2_STD_PAL_M;
break;
case 0x30:
*std = V4L2_STD_PAL_60;
break;
case 0x40:
*std = V4L2_STD_PAL;
break;
case 0x50:
*std = V4L2_STD_SECAM;
break;
case 0x60:
*std = V4L2_STD_PAL_Nc | V4L2_STD_PAL_N;
break;
case 0x70:
*std = V4L2_STD_SECAM;
break;
default:
*std = V4L2_STD_UNKNOWN;
break;
}
return 0;
}
static void adv748x_afe_fill_format(struct adv748x_afe *afe,
struct v4l2_mbus_framefmt *fmt)
{
memset(fmt, 0, sizeof(*fmt));
fmt->code = MEDIA_BUS_FMT_UYVY8_1X16;
fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
fmt->field = V4L2_FIELD_ALTERNATE;
fmt->width = 720;
fmt->height = afe->curr_norm & V4L2_STD_525_60 ? 480 : 576;
/* Field height */
fmt->height /= 2;
}
static int adv748x_afe_std(v4l2_std_id std)
{
if (std == V4L2_STD_PAL_60)
return ADV748X_AFE_STD_PAL60;
if (std == V4L2_STD_NTSC_443)
return ADV748X_AFE_STD_NTSC_443;
if (std == V4L2_STD_PAL_N)
return ADV748X_AFE_STD_PAL_N;
if (std == V4L2_STD_PAL_M)
return ADV748X_AFE_STD_PAL_M;
if (std == V4L2_STD_PAL_Nc)
return ADV748X_AFE_STD_PAL_COMB_N;
if (std & V4L2_STD_NTSC)
return ADV748X_AFE_STD_NTSC_M;
if (std & V4L2_STD_PAL)
return ADV748X_AFE_STD_PAL_BG;
if (std & V4L2_STD_SECAM)
return ADV748X_AFE_STD_PAL_SECAM;
return -EINVAL;
}
static void adv748x_afe_set_video_standard(struct adv748x_state *state,
int sdpstd)
{
sdp_clrset(state, ADV748X_SDP_VID_SEL, ADV748X_SDP_VID_SEL_MASK,
(sdpstd & 0xf) << ADV748X_SDP_VID_SEL_SHIFT);
}
int adv748x_afe_s_input(struct adv748x_afe *afe, unsigned int input)
{
struct adv748x_state *state = adv748x_afe_to_state(afe);
return sdp_write(state, ADV748X_SDP_INSEL, input);
}
static int adv748x_afe_g_pixelaspect(struct v4l2_subdev *sd,
struct v4l2_fract *aspect)
{
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
if (afe->curr_norm & V4L2_STD_525_60) {
aspect->numerator = 11;
aspect->denominator = 10;
} else {
aspect->numerator = 54;
aspect->denominator = 59;
}
return 0;
}
/* -----------------------------------------------------------------------------
* v4l2_subdev_video_ops
*/
static int adv748x_afe_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
{
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
*norm = afe->curr_norm;
return 0;
}
static int adv748x_afe_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
struct adv748x_state *state = adv748x_afe_to_state(afe);
int afe_std = adv748x_afe_std(std);
if (afe_std < 0)
return afe_std;
mutex_lock(&state->mutex);
adv748x_afe_set_video_standard(state, afe_std);
afe->curr_norm = std;
mutex_unlock(&state->mutex);
return 0;
}
static int adv748x_afe_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
{
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
struct adv748x_state *state = adv748x_afe_to_state(afe);
int afe_std;
int ret;
mutex_lock(&state->mutex);
if (afe->streaming) {
ret = -EBUSY;
goto unlock;
}
/* Set auto detect mode */
adv748x_afe_set_video_standard(state,
ADV748X_AFE_STD_AD_PAL_BG_NTSC_J_SECAM);
msleep(100);
/* Read detected standard */
ret = adv748x_afe_status(afe, NULL, std);
afe_std = adv748x_afe_std(afe->curr_norm);
if (afe_std < 0)
goto unlock;
/* Restore original state */
adv748x_afe_set_video_standard(state, afe_std);
unlock:
mutex_unlock(&state->mutex);
return ret;
}
static int adv748x_afe_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm)
{
*norm = V4L2_STD_ALL;
return 0;
}
static int adv748x_afe_g_input_status(struct v4l2_subdev *sd, u32 *status)
{
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
struct adv748x_state *state = adv748x_afe_to_state(afe);
int ret;
mutex_lock(&state->mutex);
ret = adv748x_afe_status(afe, status, NULL);
mutex_unlock(&state->mutex);
return ret;
}
static int adv748x_afe_s_stream(struct v4l2_subdev *sd, int enable)
{
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
struct adv748x_state *state = adv748x_afe_to_state(afe);
u32 signal = V4L2_IN_ST_NO_SIGNAL;
int ret;
mutex_lock(&state->mutex);
if (enable) {
ret = adv748x_afe_s_input(afe, afe->input);
if (ret)
goto unlock;
}
ret = adv748x_tx_power(afe->tx, enable);
if (ret)
goto unlock;
afe->streaming = enable;
adv748x_afe_status(afe, &signal, NULL);
if (signal != V4L2_IN_ST_NO_SIGNAL)
adv_dbg(state, "Detected SDP signal\n");
else
adv_dbg(state, "Couldn't detect SDP video signal\n");
unlock:
mutex_unlock(&state->mutex);
return ret;
}
static const struct v4l2_subdev_video_ops adv748x_afe_video_ops = {
.g_std = adv748x_afe_g_std,
.s_std = adv748x_afe_s_std,
.querystd = adv748x_afe_querystd,
.g_tvnorms = adv748x_afe_g_tvnorms,
.g_input_status = adv748x_afe_g_input_status,
.s_stream = adv748x_afe_s_stream,
.g_pixelaspect = adv748x_afe_g_pixelaspect,
};
/* -----------------------------------------------------------------------------
* v4l2_subdev_pad_ops
*/
static int adv748x_afe_propagate_pixelrate(struct adv748x_afe *afe)
{
struct v4l2_subdev *tx;
tx = adv748x_get_remote_sd(&afe->pads[ADV748X_AFE_SOURCE]);
if (!tx)
return -ENOLINK;
/*
* The ADV748x ADC sampling frequency is twice the externally supplied
* clock whose frequency is required to be 28.63636 MHz. It oversamples
* with a factor of 4 resulting in a pixel rate of 14.3180180 MHz.
*/
return adv748x_csi2_set_pixelrate(tx, 14318180);
}
static int adv748x_afe_enum_mbus_code(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 07:55:58 -07:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
if (code->index != 0)
return -EINVAL;
code->code = MEDIA_BUS_FMT_UYVY8_1X16;
return 0;
}
static int adv748x_afe_get_format(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 07:55:58 -07:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *sdformat)
{
struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
struct v4l2_mbus_framefmt *mbusformat;
/* It makes no sense to get the format of the analog sink pads */
if (sdformat->pad != ADV748X_AFE_SOURCE)
return -EINVAL;
if (sdformat->which == V4L2_SUBDEV_FORMAT_TRY) {
media: v4l: subdev: Switch to stream-aware state functions Switch all drivers accessing sub-device state to use the stream-aware functions. We will soon remove the old ones. This patch has been generated using the following Coccinelle script: ---------8<------------ @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) ---------8<------------ Additionally drivers/media/i2c/s5k5baf.c and drivers/media/platform/samsung/s3c-camif/camif-capture.c have been manually changed as Coccinelle didn't. Further local variables have been removed as they became unused as a result of the other changes. Also Coccinelle introduced indentation by space in files drivers/media/i2c/st-mipid02.c and drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c. This has been also corrected. The diff from Coccinelle-generated changes are: > diff --git b/drivers/media/i2c/imx319.c a/drivers/media/i2c/imx319.c > index e549692ff478..420984382173 100644 > --- b/drivers/media/i2c/imx319.c > +++ a/drivers/media/i2c/imx319.c > @@ -2001,7 +2001,6 @@ static int imx319_do_get_pad_format(struct imx319 *imx319, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx319->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/imx355.c a/drivers/media/i2c/imx355.c > index 96bdde685d65..e1b1d2fc79dd 100644 > --- b/drivers/media/i2c/imx355.c > +++ a/drivers/media/i2c/imx355.c > @@ -1299,7 +1299,6 @@ static int imx355_do_get_pad_format(struct imx355 *imx355, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx355->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov08x40.c a/drivers/media/i2c/ov08x40.c > index ca799bbcfdb7..abbb0b774d43 100644 > --- b/drivers/media/i2c/ov08x40.c > +++ a/drivers/media/i2c/ov08x40.c > @@ -2774,7 +2774,6 @@ static int ov08x40_do_get_pad_format(struct ov08x40 *ov08x, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov08x->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13858.c a/drivers/media/i2c/ov13858.c > index 7816d9787c61..09387e335d80 100644 > --- b/drivers/media/i2c/ov13858.c > +++ a/drivers/media/i2c/ov13858.c > @@ -1316,7 +1316,6 @@ static int ov13858_do_get_pad_format(struct ov13858 *ov13858, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13858->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13b10.c a/drivers/media/i2c/ov13b10.c > index 268cd4b03f9c..c06411d5ee2b 100644 > --- b/drivers/media/i2c/ov13b10.c > +++ a/drivers/media/i2c/ov13b10.c > @@ -1001,7 +1001,6 @@ static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13b->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/s5c73m3/s5c73m3-core.c a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > index 47605e36bc60..8f9b5713daf7 100644 > --- b/drivers/media/i2c/s5c73m3/s5c73m3-core.c > +++ a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > @@ -819,7 +819,6 @@ static void s5c73m3_oif_try_format(struct s5c73m3 *state, > struct v4l2_subdev_format *fmt, > const struct s5c73m3_frame_size **fs) > { > - struct v4l2_subdev *sd = &state->sensor_sd; > u32 code; > > switch (fmt->pad) { > diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c > index 67da2045f543..03ccfb0e1e11 100644 > --- a/drivers/media/i2c/s5k5baf.c > +++ b/drivers/media/i2c/s5k5baf.c > @@ -1472,14 +1472,11 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, > > if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > rects = (struct v4l2_rect * []) { > - &s5k5baf_cis_rect, > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_compose(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_OUT) > - }; > + &s5k5baf_cis_rect, > + v4l2_subdev_state_get_crop(sd_state, PAD_CIS), > + v4l2_subdev_state_get_compose(sd_state, PAD_CIS), > + v4l2_subdev_state_get_crop(sd_state, PAD_OUT) > + }; > s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); > return 0; > } > diff --git b/drivers/media/platform/samsung/s3c-camif/camif-capture.c a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > index 295e083f38e8..be58260ea67e 100644 > --- b/drivers/media/platform/samsung/s3c-camif/camif-capture.c > +++ a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > @@ -1216,7 +1216,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, > struct v4l2_mbus_framefmt *mf = &fmt->format; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > fmt->format = *mf; > return 0; > } > @@ -1305,7 +1305,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, > __camif_subdev_try_format(camif, mf, fmt->pad); > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > *mf = fmt->format; > mutex_unlock(&camif->lock); > return 0; > diff --git b/drivers/media/platform/ti/cal/cal-camerarx.c a/drivers/media/platform/ti/cal/cal-camerarx.c > index cea454ed9c20..61433744c6c4 100644 > --- b/drivers/media/platform/ti/cal/cal-camerarx.c > +++ a/drivers/media/platform/ti/cal/cal-camerarx.c > @@ -621,8 +621,6 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd, > struct v4l2_subdev_state *state, > struct v4l2_subdev_mbus_code_enum *code) > { > - struct cal_camerarx *phy = to_cal_camerarx(sd); > - > /* No transcoding, source and sink codes must match. */ > if (cal_rx_pad_is_source(code->pad)) { > struct v4l2_mbus_framefmt *fmt; > diff --git b/drivers/staging/media/imx/imx-ic-prp.c a/drivers/staging/media/imx/imx-ic-prp.c > index dd558fac6477..61d69f19657e 100644 > --- b/drivers/staging/media/imx/imx-ic-prp.c > +++ a/drivers/staging/media/imx/imx-ic-prp.c > @@ -82,8 +82,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git b/drivers/staging/media/imx/imx-ic-prpencvf.c a/drivers/staging/media/imx/imx-ic-prpencvf.c > index 02db7dbb884b..ec73c901079e 100644 > --- b/drivers/staging/media/imx/imx-ic-prpencvf.c > +++ a/drivers/staging/media/imx/imx-ic-prpencvf.c > @@ -790,8 +790,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c > index 9c9361354c00..b08a249b5fdd 100644 > --- a/drivers/media/i2c/st-mipid02.c > +++ b/drivers/media/i2c/st-mipid02.c > @@ -751,7 +751,7 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd, > format->format = bridge->fmt; > else > format->format = *v4l2_subdev_state_get_format(sd_state, > - MIPID02_SINK_0); > + MIPID02_SINK_0); > > /* but code may need to be converted */ > format->format.code = serial_to_parallel_code(format->format.code); > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > index 117912d3bfbd..96353648c032 100644 > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > @@ -319,7 +319,7 @@ static void rkisp1_isp_start(struct rkisp1_isp *isp, > rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, val); > > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_info = rkisp1_mbus_info_get_by_code(src_fmt->code); > > if (src_info->pixel_enc != V4L2_PIXEL_ENC_BAYER) > @@ -475,9 +475,9 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp, > sink_fmt = v4l2_subdev_state_get_format(sd_state, > RKISP1_ISP_PAD_SINK_VIDEO); > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_crop = v4l2_subdev_state_get_crop(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > > /* > * Media bus code. The ISP can operate in pass-through mode (Bayer in, Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-10-13 00:37:10 -07:00
mbusformat = v4l2_subdev_state_get_format(sd_state,
sdformat->pad);
sdformat->format = *mbusformat;
} else {
adv748x_afe_fill_format(afe, &sdformat->format);
adv748x_afe_propagate_pixelrate(afe);
}
return 0;
}
static int adv748x_afe_set_format(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 07:55:58 -07:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *sdformat)
{
struct v4l2_mbus_framefmt *mbusformat;
/* It makes no sense to get the format of the analog sink pads */
if (sdformat->pad != ADV748X_AFE_SOURCE)
return -EINVAL;
if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 07:55:58 -07:00
return adv748x_afe_get_format(sd, sd_state, sdformat);
media: v4l: subdev: Switch to stream-aware state functions Switch all drivers accessing sub-device state to use the stream-aware functions. We will soon remove the old ones. This patch has been generated using the following Coccinelle script: ---------8<------------ @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) ---------8<------------ Additionally drivers/media/i2c/s5k5baf.c and drivers/media/platform/samsung/s3c-camif/camif-capture.c have been manually changed as Coccinelle didn't. Further local variables have been removed as they became unused as a result of the other changes. Also Coccinelle introduced indentation by space in files drivers/media/i2c/st-mipid02.c and drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c. This has been also corrected. The diff from Coccinelle-generated changes are: > diff --git b/drivers/media/i2c/imx319.c a/drivers/media/i2c/imx319.c > index e549692ff478..420984382173 100644 > --- b/drivers/media/i2c/imx319.c > +++ a/drivers/media/i2c/imx319.c > @@ -2001,7 +2001,6 @@ static int imx319_do_get_pad_format(struct imx319 *imx319, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx319->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/imx355.c a/drivers/media/i2c/imx355.c > index 96bdde685d65..e1b1d2fc79dd 100644 > --- b/drivers/media/i2c/imx355.c > +++ a/drivers/media/i2c/imx355.c > @@ -1299,7 +1299,6 @@ static int imx355_do_get_pad_format(struct imx355 *imx355, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx355->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov08x40.c a/drivers/media/i2c/ov08x40.c > index ca799bbcfdb7..abbb0b774d43 100644 > --- b/drivers/media/i2c/ov08x40.c > +++ a/drivers/media/i2c/ov08x40.c > @@ -2774,7 +2774,6 @@ static int ov08x40_do_get_pad_format(struct ov08x40 *ov08x, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov08x->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13858.c a/drivers/media/i2c/ov13858.c > index 7816d9787c61..09387e335d80 100644 > --- b/drivers/media/i2c/ov13858.c > +++ a/drivers/media/i2c/ov13858.c > @@ -1316,7 +1316,6 @@ static int ov13858_do_get_pad_format(struct ov13858 *ov13858, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13858->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13b10.c a/drivers/media/i2c/ov13b10.c > index 268cd4b03f9c..c06411d5ee2b 100644 > --- b/drivers/media/i2c/ov13b10.c > +++ a/drivers/media/i2c/ov13b10.c > @@ -1001,7 +1001,6 @@ static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13b->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/s5c73m3/s5c73m3-core.c a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > index 47605e36bc60..8f9b5713daf7 100644 > --- b/drivers/media/i2c/s5c73m3/s5c73m3-core.c > +++ a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > @@ -819,7 +819,6 @@ static void s5c73m3_oif_try_format(struct s5c73m3 *state, > struct v4l2_subdev_format *fmt, > const struct s5c73m3_frame_size **fs) > { > - struct v4l2_subdev *sd = &state->sensor_sd; > u32 code; > > switch (fmt->pad) { > diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c > index 67da2045f543..03ccfb0e1e11 100644 > --- a/drivers/media/i2c/s5k5baf.c > +++ b/drivers/media/i2c/s5k5baf.c > @@ -1472,14 +1472,11 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, > > if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > rects = (struct v4l2_rect * []) { > - &s5k5baf_cis_rect, > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_compose(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_OUT) > - }; > + &s5k5baf_cis_rect, > + v4l2_subdev_state_get_crop(sd_state, PAD_CIS), > + v4l2_subdev_state_get_compose(sd_state, PAD_CIS), > + v4l2_subdev_state_get_crop(sd_state, PAD_OUT) > + }; > s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); > return 0; > } > diff --git b/drivers/media/platform/samsung/s3c-camif/camif-capture.c a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > index 295e083f38e8..be58260ea67e 100644 > --- b/drivers/media/platform/samsung/s3c-camif/camif-capture.c > +++ a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > @@ -1216,7 +1216,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, > struct v4l2_mbus_framefmt *mf = &fmt->format; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > fmt->format = *mf; > return 0; > } > @@ -1305,7 +1305,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, > __camif_subdev_try_format(camif, mf, fmt->pad); > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > *mf = fmt->format; > mutex_unlock(&camif->lock); > return 0; > diff --git b/drivers/media/platform/ti/cal/cal-camerarx.c a/drivers/media/platform/ti/cal/cal-camerarx.c > index cea454ed9c20..61433744c6c4 100644 > --- b/drivers/media/platform/ti/cal/cal-camerarx.c > +++ a/drivers/media/platform/ti/cal/cal-camerarx.c > @@ -621,8 +621,6 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd, > struct v4l2_subdev_state *state, > struct v4l2_subdev_mbus_code_enum *code) > { > - struct cal_camerarx *phy = to_cal_camerarx(sd); > - > /* No transcoding, source and sink codes must match. */ > if (cal_rx_pad_is_source(code->pad)) { > struct v4l2_mbus_framefmt *fmt; > diff --git b/drivers/staging/media/imx/imx-ic-prp.c a/drivers/staging/media/imx/imx-ic-prp.c > index dd558fac6477..61d69f19657e 100644 > --- b/drivers/staging/media/imx/imx-ic-prp.c > +++ a/drivers/staging/media/imx/imx-ic-prp.c > @@ -82,8 +82,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git b/drivers/staging/media/imx/imx-ic-prpencvf.c a/drivers/staging/media/imx/imx-ic-prpencvf.c > index 02db7dbb884b..ec73c901079e 100644 > --- b/drivers/staging/media/imx/imx-ic-prpencvf.c > +++ a/drivers/staging/media/imx/imx-ic-prpencvf.c > @@ -790,8 +790,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c > index 9c9361354c00..b08a249b5fdd 100644 > --- a/drivers/media/i2c/st-mipid02.c > +++ b/drivers/media/i2c/st-mipid02.c > @@ -751,7 +751,7 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd, > format->format = bridge->fmt; > else > format->format = *v4l2_subdev_state_get_format(sd_state, > - MIPID02_SINK_0); > + MIPID02_SINK_0); > > /* but code may need to be converted */ > format->format.code = serial_to_parallel_code(format->format.code); > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > index 117912d3bfbd..96353648c032 100644 > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > @@ -319,7 +319,7 @@ static void rkisp1_isp_start(struct rkisp1_isp *isp, > rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, val); > > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_info = rkisp1_mbus_info_get_by_code(src_fmt->code); > > if (src_info->pixel_enc != V4L2_PIXEL_ENC_BAYER) > @@ -475,9 +475,9 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp, > sink_fmt = v4l2_subdev_state_get_format(sd_state, > RKISP1_ISP_PAD_SINK_VIDEO); > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_crop = v4l2_subdev_state_get_crop(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > > /* > * Media bus code. The ISP can operate in pass-through mode (Bayer in, Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-10-13 00:37:10 -07:00
mbusformat = v4l2_subdev_state_get_format(sd_state, sdformat->pad);
*mbusformat = sdformat->format;
return 0;
}
static const struct v4l2_subdev_pad_ops adv748x_afe_pad_ops = {
.enum_mbus_code = adv748x_afe_enum_mbus_code,
.set_fmt = adv748x_afe_set_format,
.get_fmt = adv748x_afe_get_format,
};
/* -----------------------------------------------------------------------------
* v4l2_subdev_ops
*/
static const struct v4l2_subdev_ops adv748x_afe_ops = {
.video = &adv748x_afe_video_ops,
.pad = &adv748x_afe_pad_ops,
};
/* -----------------------------------------------------------------------------
* Controls
*/
static const char * const afe_ctrl_frp_menu[] = {
"Disabled",
"Solid Blue",
"Color Bars",
"Grey Ramp",
"Cb Ramp",
"Cr Ramp",
"Boundary"
};
static int adv748x_afe_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct adv748x_afe *afe = adv748x_ctrl_to_afe(ctrl);
struct adv748x_state *state = adv748x_afe_to_state(afe);
bool enable;
int ret;
ret = sdp_write(state, 0x0e, 0x00);
if (ret < 0)
return ret;
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
ret = sdp_write(state, ADV748X_SDP_BRI, ctrl->val);
break;
case V4L2_CID_HUE:
/* Hue is inverted according to HSL chart */
ret = sdp_write(state, ADV748X_SDP_HUE, -ctrl->val);
break;
case V4L2_CID_CONTRAST:
ret = sdp_write(state, ADV748X_SDP_CON, ctrl->val);
break;
case V4L2_CID_SATURATION:
ret = sdp_write(state, ADV748X_SDP_SD_SAT_U, ctrl->val);
if (ret)
break;
ret = sdp_write(state, ADV748X_SDP_SD_SAT_V, ctrl->val);
break;
case V4L2_CID_TEST_PATTERN:
enable = !!ctrl->val;
/* Enable/Disable Color bar test patterns */
ret = sdp_clrset(state, ADV748X_SDP_DEF, ADV748X_SDP_DEF_VAL_EN,
enable);
if (ret)
break;
ret = sdp_clrset(state, ADV748X_SDP_FRP, ADV748X_SDP_FRP_MASK,
enable ? ctrl->val - 1 : 0);
break;
default:
return -EINVAL;
}
return ret;
}
static const struct v4l2_ctrl_ops adv748x_afe_ctrl_ops = {
.s_ctrl = adv748x_afe_s_ctrl,
};
static int adv748x_afe_init_controls(struct adv748x_afe *afe)
{
struct adv748x_state *state = adv748x_afe_to_state(afe);
v4l2_ctrl_handler_init(&afe->ctrl_hdl, 5);
/* Use our mutex for the controls */
afe->ctrl_hdl.lock = &state->mutex;
v4l2_ctrl_new_std(&afe->ctrl_hdl, &adv748x_afe_ctrl_ops,
V4L2_CID_BRIGHTNESS, ADV748X_SDP_BRI_MIN,
ADV748X_SDP_BRI_MAX, 1, ADV748X_SDP_BRI_DEF);
v4l2_ctrl_new_std(&afe->ctrl_hdl, &adv748x_afe_ctrl_ops,
V4L2_CID_CONTRAST, ADV748X_SDP_CON_MIN,
ADV748X_SDP_CON_MAX, 1, ADV748X_SDP_CON_DEF);
v4l2_ctrl_new_std(&afe->ctrl_hdl, &adv748x_afe_ctrl_ops,
V4L2_CID_SATURATION, ADV748X_SDP_SAT_MIN,
ADV748X_SDP_SAT_MAX, 1, ADV748X_SDP_SAT_DEF);
v4l2_ctrl_new_std(&afe->ctrl_hdl, &adv748x_afe_ctrl_ops,
V4L2_CID_HUE, ADV748X_SDP_HUE_MIN,
ADV748X_SDP_HUE_MAX, 1, ADV748X_SDP_HUE_DEF);
v4l2_ctrl_new_std_menu_items(&afe->ctrl_hdl, &adv748x_afe_ctrl_ops,
V4L2_CID_TEST_PATTERN,
ARRAY_SIZE(afe_ctrl_frp_menu) - 1,
0, 0, afe_ctrl_frp_menu);
afe->sd.ctrl_handler = &afe->ctrl_hdl;
if (afe->ctrl_hdl.error) {
v4l2_ctrl_handler_free(&afe->ctrl_hdl);
return afe->ctrl_hdl.error;
}
return v4l2_ctrl_handler_setup(&afe->ctrl_hdl);
}
int adv748x_afe_init(struct adv748x_afe *afe)
{
struct adv748x_state *state = adv748x_afe_to_state(afe);
int ret;
unsigned int i;
afe->input = 0;
afe->streaming = false;
afe->curr_norm = V4L2_STD_NTSC_M;
adv748x_subdev_init(&afe->sd, state, &adv748x_afe_ops,
MEDIA_ENT_F_ATV_DECODER, "afe");
/* Identify the first connector found as a default input if set */
for (i = ADV748X_PORT_AIN0; i <= ADV748X_PORT_AIN7; i++) {
/* Inputs and ports are 1-indexed to match the data sheet */
if (state->endpoints[i]) {
afe->input = i;
break;
}
}
adv748x_afe_s_input(afe, afe->input);
adv_dbg(state, "AFE Default input set to %d\n", afe->input);
/* Entity pads and sinks are 0-indexed to match the pads */
for (i = ADV748X_AFE_SINK_AIN0; i <= ADV748X_AFE_SINK_AIN7; i++)
afe->pads[i].flags = MEDIA_PAD_FL_SINK;
afe->pads[ADV748X_AFE_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&afe->sd.entity, ADV748X_AFE_NR_PADS,
afe->pads);
if (ret)
return ret;
ret = adv748x_afe_init_controls(afe);
if (ret)
goto error;
return 0;
error:
media_entity_cleanup(&afe->sd.entity);
return ret;
}
void adv748x_afe_cleanup(struct adv748x_afe *afe)
{
v4l2_device_unregister_subdev(&afe->sd);
media_entity_cleanup(&afe->sd.entity);
v4l2_ctrl_handler_free(&afe->ctrl_hdl);
}