1
linux/drivers/input/misc/pcf8574_keypad.c

212 lines
4.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Driver for a keypad w/16 buttons connected to a PCF8574 I2C I/O expander
*
* Copyright 2005-2008 Analog Devices Inc.
*/
#include <linux/module.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#define DRV_NAME "pcf8574_keypad"
static const unsigned char pcf8574_kp_btncode[] = {
[0] = KEY_RESERVED,
[1] = KEY_ENTER,
[2] = KEY_BACKSLASH,
[3] = KEY_0,
[4] = KEY_RIGHTBRACE,
[5] = KEY_C,
[6] = KEY_9,
[7] = KEY_8,
[8] = KEY_7,
[9] = KEY_B,
[10] = KEY_6,
[11] = KEY_5,
[12] = KEY_4,
[13] = KEY_A,
[14] = KEY_3,
[15] = KEY_2,
[16] = KEY_1
};
struct kp_data {
unsigned short btncode[ARRAY_SIZE(pcf8574_kp_btncode)];
struct input_dev *idev;
struct i2c_client *client;
char name[64];
char phys[32];
unsigned char laststate;
};
static short read_state(struct kp_data *lp)
{
unsigned char x, y, a, b;
i2c_smbus_write_byte(lp->client, 240);
x = 0xF & (~(i2c_smbus_read_byte(lp->client) >> 4));
i2c_smbus_write_byte(lp->client, 15);
y = 0xF & (~i2c_smbus_read_byte(lp->client));
for (a = 0; x > 0; a++)
x = x >> 1;
for (b = 0; y > 0; b++)
y = y >> 1;
return ((a - 1) * 4) + b;
}
static irqreturn_t pcf8574_kp_irq_handler(int irq, void *dev_id)
{
struct kp_data *lp = dev_id;
unsigned char nextstate = read_state(lp);
if (lp->laststate != nextstate) {
int key_down = nextstate < ARRAY_SIZE(lp->btncode);
unsigned short keycode = key_down ?
lp->btncode[nextstate] : lp->btncode[lp->laststate];
input_report_key(lp->idev, keycode, key_down);
input_sync(lp->idev);
lp->laststate = nextstate;
}
return IRQ_HANDLED;
}
static int pcf8574_kp_probe(struct i2c_client *client)
{
int i, ret;
struct input_dev *idev;
struct kp_data *lp;
if (i2c_smbus_write_byte(client, 240) < 0) {
dev_err(&client->dev, "probe: write fail\n");
return -ENODEV;
}
lp = kzalloc(sizeof(*lp), GFP_KERNEL);
if (!lp)
return -ENOMEM;
idev = input_allocate_device();
if (!idev) {
dev_err(&client->dev, "Can't allocate input device\n");
ret = -ENOMEM;
goto fail_allocate;
}
lp->idev = idev;
lp->client = client;
idev->evbit[0] = BIT_MASK(EV_KEY);
idev->keycode = lp->btncode;
idev->keycodesize = sizeof(lp->btncode[0]);
idev->keycodemax = ARRAY_SIZE(lp->btncode);
for (i = 0; i < ARRAY_SIZE(pcf8574_kp_btncode); i++) {
if (lp->btncode[i] <= KEY_MAX) {
lp->btncode[i] = pcf8574_kp_btncode[i];
__set_bit(lp->btncode[i], idev->keybit);
}
}
__clear_bit(KEY_RESERVED, idev->keybit);
sprintf(lp->name, DRV_NAME);
sprintf(lp->phys, "kp_data/input0");
idev->name = lp->name;
idev->phys = lp->phys;
idev->id.bustype = BUS_I2C;
idev->id.vendor = 0x0001;
idev->id.product = 0x0001;
idev->id.version = 0x0100;
lp->laststate = read_state(lp);
ret = request_threaded_irq(client->irq, NULL, pcf8574_kp_irq_handler,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
DRV_NAME, lp);
if (ret) {
dev_err(&client->dev, "IRQ %d is not free\n", client->irq);
goto fail_free_device;
}
ret = input_register_device(idev);
if (ret) {
dev_err(&client->dev, "input_register_device() failed\n");
goto fail_free_irq;
}
i2c_set_clientdata(client, lp);
return 0;
fail_free_irq:
free_irq(client->irq, lp);
fail_free_device:
input_free_device(idev);
fail_allocate:
kfree(lp);
return ret;
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 01:02:30 -07:00
static void pcf8574_kp_remove(struct i2c_client *client)
{
struct kp_data *lp = i2c_get_clientdata(client);
free_irq(client->irq, lp);
input_unregister_device(lp->idev);
kfree(lp);
}
static int pcf8574_kp_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
enable_irq(client->irq);
return 0;
}
static int pcf8574_kp_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
disable_irq(client->irq);
return 0;
}
static DEFINE_SIMPLE_DEV_PM_OPS(pcf8574_kp_pm_ops,
pcf8574_kp_suspend, pcf8574_kp_resume);
static const struct i2c_device_id pcf8574_kp_id[] = {
{ DRV_NAME },
{ }
};
MODULE_DEVICE_TABLE(i2c, pcf8574_kp_id);
static struct i2c_driver pcf8574_kp_driver = {
.driver = {
.name = DRV_NAME,
.pm = pm_sleep_ptr(&pcf8574_kp_pm_ops),
},
.probe = pcf8574_kp_probe,
.remove = pcf8574_kp_remove,
.id_table = pcf8574_kp_id,
};
module_i2c_driver(pcf8574_kp_driver);
MODULE_AUTHOR("Michael Hennerich");
MODULE_DESCRIPTION("Keypad input driver for 16 keys connected to PCF8574");
MODULE_LICENSE("GPL");