kevin/linux
1
Fork 0
Code
adc218676e
linux/drivers/clk/imx/clk-imx7ulp.c

255 lines
14 KiB
C
Raw Normal View History

clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
* Copyright 2017~2018 NXP
*
* Author: Dong Aisheng <aisheng.dong@nxp.com>
*
*/
#include <dt-bindings/clock/imx7ulp-clock.h>
clk: imx7ulp: Include clk-provider.h instead of clk.h The i.MX7ULP clock driver is provider, NOT consumer, so clk-provider.h should be used instead of clk.h. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-12 02:09:43 -07:00
#include <linux/clk-provider.h>
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "clk.h"
static const char * const pll_pre_sels[] = { "sosc", "firc", };
static const char * const spll_pfd_sels[] = { "spll_pfd0", "spll_pfd1", "spll_pfd2", "spll_pfd3", };
static const char * const spll_sels[] = { "spll", "spll_pfd_sel", };
static const char * const apll_pfd_sels[] = { "apll_pfd0", "apll_pfd1", "apll_pfd2", "apll_pfd3", };
static const char * const apll_sels[] = { "apll", "apll_pfd_sel", };
clk: imx7ulp: Correct system clock source option #7 In the latest reference manual Rev.0,06/2019, the SCS's option #7 is no longer from upll, it is reserved, update clock driver accordingly. Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-13 17:56:05 -07:00
static const char * const scs_sels[] = { "dummy", "sosc", "sirc", "firc", "dummy", "apll_sel", "spll_sel", "dummy", };
clk: imx7ulp: Correct DDR clock mux options In the latest reference manual Rev.0,06/2019, the DDR clock mux is extended to 2 bits, and the clock options are also changed, correct them accordingly. Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-11 02:09:00 -07:00
static const char * const ddr_sels[] = { "apll_pfd_sel", "dummy", "dummy", "dummy", };
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
static const char * const nic_sels[] = { "firc", "ddr_clk", };
static const char * const periph_plat_sels[] = { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock The mipi pll clock comes from the MIPI PHY PLL output, so it should not be a fixed clock. MIPI PHY PLL is in the MIPI DSI space, and it is used as the bit clock for transferring the pixel data out and its output clock is configured according to the display mode. So it should be used only for MIPI DSI and not be exported out for other usages. Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28 01:07:59 -07:00
static const char * const periph_bus_sels[] = { "dummy", "sosc_bus_clk", "dummy", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
clk: imx7ulp: make it easy to change ARM core clk ARM clk could only source from divcore or hsrun_divcore. Follow what we already used on i.MX7D and i.MX8M SoCs, use imx_clk_hw_cpu API. When ARM core is running normaly, whether divcore or hwrun_divcore will finally source from SPLL_PFD0. However SPLL_PFD0 is marked with CLK_SET_GATE, so we need to disable SPLL_PFD0, when configure the rate. So add CORE and HSRUN_CORE virtual clk to make it easy to configure the clk using imx_clk_hw_cpu API. Since CORE and HSRUN_CORE already marked with CLK_IS_CRITICAL, no need to set ARM as CLK_IS_CRITICAL. And when set the rate of ARM clk, prograting it the parent with CLK_SET_RATE_PARENT will finally set the SPLL_PFD0 clk. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16 01:32:33 -07:00
static const char * const arm_sels[] = { "core", "dummy", "dummy", "hsrun_core", };
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
/* used by sosc/sirc/firc/ddr/spll/apll dividers */
static const struct clk_div_table ulp_div_table[] = {
{ .val = 1, .div = 1, },
{ .val = 2, .div = 2, },
{ .val = 3, .div = 4, },
{ .val = 4, .div = 8, },
{ .val = 5, .div = 16, },
{ .val = 6, .div = 32, },
{ .val = 7, .div = 64, },
clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table There should be a sentinel of ulp_div_table, otherwise _get_table_div may access data out of the array. Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver") Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-21 23:11:42 -07:00
{ /* sentinel */ },
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
};
static void __init imx7ulp_clk_scg1_init(struct device_node *np)
{
struct clk_hw_onecell_data *clk_data;
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
struct clk_hw **hws;
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
void __iomem *base;
clk: imx: imx7ulp: use struct_size() in kzalloc() One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-23 23:40:25 -07:00
clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_SCG1_END),
GFP_KERNEL);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
if (!clk_data)
return;
clk_data->num = IMX7ULP_CLK_SCG1_END;
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws = clk_data->hws;
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
clk: imx: rename imx_obtain_fixed_clk_hw() to imx_get_clk_hw_by_name() The imx_obtain_fixed_clk_hw name was wrong and misleading. Renaming it to imx_get_clk_hw_by_name clarifies the purpose of the function, and will allow it to be used not only for fixed rate clocks but also in wider contexts. No functional changes intended. The replacements were made with the following command: grep -rl 'imx_obtain_fixed_clk_hw' ./ | \ xargs sed -i 's/imx_obtain_fixed_clk_hw/imx_get_clk_hw_by_name/g' Tested on a BSH SystemMaster (SMM) S2 board. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221113180839.1625832-1-dario.binacchi@amarulasolutions.com
2022-11-13 11:08:39 -07:00
hws[IMX7ULP_CLK_ROSC] = imx_get_clk_hw_by_name(np, "rosc");
hws[IMX7ULP_CLK_SOSC] = imx_get_clk_hw_by_name(np, "sosc");
hws[IMX7ULP_CLK_SIRC] = imx_get_clk_hw_by_name(np, "sirc");
hws[IMX7ULP_CLK_FIRC] = imx_get_clk_hw_by_name(np, "firc");
hws[IMX7ULP_CLK_UPLL] = imx_get_clk_hw_by_name(np, "upll");
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
/* SCG1 */
base = of_iomap(np, 0);
WARN_ON(!base);
/* NOTE: xPLL config can't be changed when xPLL is enabled */
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_APLL_PRE_SEL] = imx_clk_hw_mux_flags("apll_pre_sel", base + 0x508, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
hws[IMX7ULP_CLK_SPLL_PRE_SEL] = imx_clk_hw_mux_flags("spll_pre_sel", base + 0x608, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
/* name parent_name reg shift width flags */
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_APLL_PRE_DIV] = imx_clk_hw_divider_flags("apll_pre_div", "apll_pre_sel", base + 0x508, 8, 3, CLK_SET_RATE_GATE);
hws[IMX7ULP_CLK_SPLL_PRE_DIV] = imx_clk_hw_divider_flags("spll_pre_div", "spll_pre_sel", base + 0x608, 8, 3, CLK_SET_RATE_GATE);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
/* name parent_name base */
clk: imx: Update the pllv4 to support imx8ulp The PLLs used on i.MX8ULP is mostly the same as on i.MX7ULP, except the PLL register offset is changed. Change the PLLv4 driver for code reuse on i.MX7ULP and i.MX8ULP. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-3-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-13 23:52:01 -07:00
hws[IMX7ULP_CLK_APLL] = imx_clk_hw_pllv4(IMX_PLLV4_IMX7ULP, "apll", "apll_pre_div", base + 0x500);
hws[IMX7ULP_CLK_SPLL] = imx_clk_hw_pllv4(IMX_PLLV4_IMX7ULP, "spll", "spll_pre_div", base + 0x600);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
/* APLL PFDs */
clk: imx: Update the pfdv2 for 8ulp specific support On i.MX8ULP, the 'CLK_SET_RATE_PARENT' flag should NOT be set and according to the laest RM, the PFD divider value range seems will be changed in the future, so update the pfdv2 to include the specific support for i.MX8ULP. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-8-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-13 23:52:06 -07:00
hws[IMX7ULP_CLK_APLL_PFD0] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd0", "apll", base + 0x50c, 0);
hws[IMX7ULP_CLK_APLL_PFD1] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd1", "apll", base + 0x50c, 1);
hws[IMX7ULP_CLK_APLL_PFD2] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd2", "apll", base + 0x50c, 2);
hws[IMX7ULP_CLK_APLL_PFD3] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd3", "apll", base + 0x50c, 3);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
/* SPLL PFDs */
clk: imx: Update the pfdv2 for 8ulp specific support On i.MX8ULP, the 'CLK_SET_RATE_PARENT' flag should NOT be set and according to the laest RM, the PFD divider value range seems will be changed in the future, so update the pfdv2 to include the specific support for i.MX8ULP. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-8-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-13 23:52:06 -07:00
hws[IMX7ULP_CLK_SPLL_PFD0] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd0", "spll", base + 0x60C, 0);
hws[IMX7ULP_CLK_SPLL_PFD1] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd1", "spll", base + 0x60C, 1);
hws[IMX7ULP_CLK_SPLL_PFD2] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd2", "spll", base + 0x60C, 2);
hws[IMX7ULP_CLK_SPLL_PFD3] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd3", "spll", base + 0x60C, 3);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
/* PLL Mux */
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_APLL_PFD_SEL] = imx_clk_hw_mux_flags("apll_pfd_sel", base + 0x508, 14, 2, apll_pfd_sels, ARRAY_SIZE(apll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
hws[IMX7ULP_CLK_SPLL_PFD_SEL] = imx_clk_hw_mux_flags("spll_pfd_sel", base + 0x608, 14, 2, spll_pfd_sels, ARRAY_SIZE(spll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
hws[IMX7ULP_CLK_APLL_SEL] = imx_clk_hw_mux_flags("apll_sel", base + 0x508, 1, 1, apll_sels, ARRAY_SIZE(apll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
hws[IMX7ULP_CLK_SPLL_SEL] = imx_clk_hw_mux_flags("spll_sel", base + 0x608, 1, 1, spll_sels, ARRAY_SIZE(spll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_SPLL_BUS_CLK] = imx_clk_hw_divider_gate("spll_bus_clk", "spll_sel", CLK_SET_RATE_GATE, base + 0x604, 8, 3, 0, ulp_div_table, &imx_ccm_lock);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
/* scs/ddr/nic select different clock source requires that clock to be enabled first */
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_SYS_SEL] = imx_clk_hw_mux2("scs_sel", base + 0x14, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
hws[IMX7ULP_CLK_HSRUN_SYS_SEL] = imx_clk_hw_mux2("hsrun_scs_sel", base + 0x1c, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
hws[IMX7ULP_CLK_NIC_SEL] = imx_clk_hw_mux2("nic_sel", base + 0x40, 28, 1, nic_sels, ARRAY_SIZE(nic_sels));
hws[IMX7ULP_CLK_DDR_SEL] = imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 2, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_CORE_DIV] = imx_clk_hw_divider_flags("divcore", "scs_sel", base + 0x14, 16, 4, CLK_SET_RATE_PARENT);
clk: imx7ulp: make it easy to change ARM core clk ARM clk could only source from divcore or hsrun_divcore. Follow what we already used on i.MX7D and i.MX8M SoCs, use imx_clk_hw_cpu API. When ARM core is running normaly, whether divcore or hwrun_divcore will finally source from SPLL_PFD0. However SPLL_PFD0 is marked with CLK_SET_GATE, so we need to disable SPLL_PFD0, when configure the rate. So add CORE and HSRUN_CORE virtual clk to make it easy to configure the clk using imx_clk_hw_cpu API. Since CORE and HSRUN_CORE already marked with CLK_IS_CRITICAL, no need to set ARM as CLK_IS_CRITICAL. And when set the rate of ARM clk, prograting it the parent with CLK_SET_RATE_PARENT will finally set the SPLL_PFD0 clk. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16 01:32:33 -07:00
hws[IMX7ULP_CLK_CORE] = imx_clk_hw_cpu("core", "divcore", hws[IMX7ULP_CLK_CORE_DIV]->clk, hws[IMX7ULP_CLK_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_HSRUN_CORE_DIV] = imx_clk_hw_divider_flags("hsrun_divcore", "hsrun_scs_sel", base + 0x1c, 16, 4, CLK_SET_RATE_PARENT);
clk: imx7ulp: make it easy to change ARM core clk ARM clk could only source from divcore or hsrun_divcore. Follow what we already used on i.MX7D and i.MX8M SoCs, use imx_clk_hw_cpu API. When ARM core is running normaly, whether divcore or hwrun_divcore will finally source from SPLL_PFD0. However SPLL_PFD0 is marked with CLK_SET_GATE, so we need to disable SPLL_PFD0, when configure the rate. So add CORE and HSRUN_CORE virtual clk to make it easy to configure the clk using imx_clk_hw_cpu API. Since CORE and HSRUN_CORE already marked with CLK_IS_CRITICAL, no need to set ARM as CLK_IS_CRITICAL. And when set the rate of ARM clk, prograting it the parent with CLK_SET_RATE_PARENT will finally set the SPLL_PFD0 clk. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16 01:32:33 -07:00
hws[IMX7ULP_CLK_HSRUN_CORE] = imx_clk_hw_cpu("hsrun_core", "hsrun_divcore", hws[IMX7ULP_CLK_HSRUN_CORE_DIV]->clk, hws[IMX7ULP_CLK_HSRUN_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_DDR_DIV] = imx_clk_hw_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
0, ulp_div_table, &imx_ccm_lock);
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_NIC0_DIV] = imx_clk_hw_divider_flags("nic0_clk", "nic_sel", base + 0x40, 24, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
hws[IMX7ULP_CLK_NIC1_DIV] = imx_clk_hw_divider_flags("nic1_clk", "nic0_clk", base + 0x40, 16, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
hws[IMX7ULP_CLK_NIC1_BUS_DIV] = imx_clk_hw_divider_flags("nic1_bus_clk", "nic0_clk", base + 0x40, 4, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_GPU_DIV] = imx_clk_hw_divider("gpu_clk", "nic0_clk", base + 0x40, 20, 4);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_SOSC_BUS_CLK] = imx_clk_hw_divider_gate("sosc_bus_clk", "sosc", 0, base + 0x104, 8, 3,
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_FIRC_BUS_CLK] = imx_clk_hw_divider_gate("firc_bus_clk", "firc", 0, base + 0x304, 8, 3,
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
imx_check_clk_hws(hws, clk_data->num);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
}
CLK_OF_DECLARE(imx7ulp_clk_scg1, "fsl,imx7ulp-scg1", imx7ulp_clk_scg1_init);
static void __init imx7ulp_clk_pcc2_init(struct device_node *np)
{
struct clk_hw_onecell_data *clk_data;
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
struct clk_hw **hws;
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
void __iomem *base;
clk: imx: imx7ulp: use struct_size() in kzalloc() One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-23 23:40:25 -07:00
clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_PCC2_END),
GFP_KERNEL);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
if (!clk_data)
return;
clk_data->num = IMX7ULP_CLK_PCC2_END;
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws = clk_data->hws;
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
/* PCC2 */
base = of_iomap(np, 0);
WARN_ON(!base);
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_DMA1] = imx_clk_hw_gate("dma1", "nic1_clk", base + 0x20, 30);
hws[IMX7ULP_CLK_RGPIO2P1] = imx_clk_hw_gate("rgpio2p1", "nic1_bus_clk", base + 0x3c, 30);
hws[IMX7ULP_CLK_DMA_MUX1] = imx_clk_hw_gate("dma_mux1", "nic1_bus_clk", base + 0x84, 30);
hws[IMX7ULP_CLK_CAAM] = imx_clk_hw_gate("caam", "nic1_clk", base + 0x90, 30);
hws[IMX7ULP_CLK_LPTPM4] = imx7ulp_clk_hw_composite("lptpm4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
hws[IMX7ULP_CLK_LPTPM5] = imx7ulp_clk_hw_composite("lptpm5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
hws[IMX7ULP_CLK_LPIT1] = imx7ulp_clk_hw_composite("lpit1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
hws[IMX7ULP_CLK_LPSPI2] = imx7ulp_clk_hw_composite("lpspi2", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa4);
hws[IMX7ULP_CLK_LPSPI3] = imx7ulp_clk_hw_composite("lpspi3", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa8);
hws[IMX7ULP_CLK_LPI2C4] = imx7ulp_clk_hw_composite("lpi2c4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xac);
hws[IMX7ULP_CLK_LPI2C5] = imx7ulp_clk_hw_composite("lpi2c5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb0);
hws[IMX7ULP_CLK_LPUART4] = imx7ulp_clk_hw_composite("lpuart4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb4);
hws[IMX7ULP_CLK_LPUART5] = imx7ulp_clk_hw_composite("lpuart5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb8);
hws[IMX7ULP_CLK_FLEXIO1] = imx7ulp_clk_hw_composite("flexio1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xc4);
hws[IMX7ULP_CLK_USB0] = imx7ulp_clk_hw_composite("usb0", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xcc);
hws[IMX7ULP_CLK_USB1] = imx7ulp_clk_hw_composite("usb1", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xd0);
hws[IMX7ULP_CLK_USB_PHY] = imx_clk_hw_gate("usb_phy", "nic1_bus_clk", base + 0xd4, 30);
hws[IMX7ULP_CLK_USDHC0] = imx7ulp_clk_hw_composite("usdhc0", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xdc);
hws[IMX7ULP_CLK_USDHC1] = imx7ulp_clk_hw_composite("usdhc1", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xe0);
hws[IMX7ULP_CLK_WDG1] = imx7ulp_clk_hw_composite("wdg1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true, true, base + 0xf4);
hws[IMX7ULP_CLK_WDG2] = imx7ulp_clk_hw_composite("wdg2", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true, true, base + 0x10c);
imx_check_clk_hws(hws, clk_data->num);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
clk: imx7ulp: Make sure earlycon's clock is enabled Earlycon's clock could be disabled during kernel boot up, if earlycon is enabled and its clock is gated, then kernel boot up will fail. Make sure earlycon's clock is enabled during kernel boot up. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23 20:06:00 -07:00
clk: imx: remove clk_count of imx_register_uart_clocks The clk count has been get with of_clk_get_parent_count, there is no need to pass clk_count from users. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230104110032.1220721-4-peng.fan@oss.nxp.com
2023-01-04 04:00:31 -07:00
imx_register_uart_clocks();
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
}
CLK_OF_DECLARE(imx7ulp_clk_pcc2, "fsl,imx7ulp-pcc2", imx7ulp_clk_pcc2_init);
static void __init imx7ulp_clk_pcc3_init(struct device_node *np)
{
struct clk_hw_onecell_data *clk_data;
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
struct clk_hw **hws;
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
void __iomem *base;
clk: imx: imx7ulp: use struct_size() in kzalloc() One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-23 23:40:25 -07:00
clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_PCC3_END),
GFP_KERNEL);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
if (!clk_data)
return;
clk_data->num = IMX7ULP_CLK_PCC3_END;
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws = clk_data->hws;
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
/* PCC3 */
base = of_iomap(np, 0);
WARN_ON(!base);
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_LPTPM6] = imx7ulp_clk_hw_composite("lptpm6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x84);
hws[IMX7ULP_CLK_LPTPM7] = imx7ulp_clk_hw_composite("lptpm7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x88);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_MMDC] = clk_hw_register_gate(NULL, "mmdc", "nic1_clk", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
base + 0xac, 30, 0, &imx_ccm_lock);
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_LPI2C6] = imx7ulp_clk_hw_composite("lpi2c6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x90);
hws[IMX7ULP_CLK_LPI2C7] = imx7ulp_clk_hw_composite("lpi2c7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
hws[IMX7ULP_CLK_LPUART6] = imx7ulp_clk_hw_composite("lpuart6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
hws[IMX7ULP_CLK_LPUART7] = imx7ulp_clk_hw_composite("lpuart7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
hws[IMX7ULP_CLK_DSI] = imx7ulp_clk_hw_composite("dsi", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true, true, base + 0xa4);
hws[IMX7ULP_CLK_LCDIF] = imx7ulp_clk_hw_composite("lcdif", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xa8);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_VIU] = imx_clk_hw_gate("viu", "nic1_clk", base + 0xa0, 30);
hws[IMX7ULP_CLK_PCTLC] = imx_clk_hw_gate("pctlc", "nic1_bus_clk", base + 0xb8, 30);
hws[IMX7ULP_CLK_PCTLD] = imx_clk_hw_gate("pctld", "nic1_bus_clk", base + 0xbc, 30);
hws[IMX7ULP_CLK_PCTLE] = imx_clk_hw_gate("pctle", "nic1_bus_clk", base + 0xc0, 30);
hws[IMX7ULP_CLK_PCTLF] = imx_clk_hw_gate("pctlf", "nic1_bus_clk", base + 0xc4, 30);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws[IMX7ULP_CLK_GPU3D] = imx7ulp_clk_hw_composite("gpu3d", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x140);
hws[IMX7ULP_CLK_GPU2D] = imx7ulp_clk_hw_composite("gpu2d", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x144);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
imx_check_clk_hws(hws, clk_data->num);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
clk: imx7ulp: Make sure earlycon's clock is enabled Earlycon's clock could be disabled during kernel boot up, if earlycon is enabled and its clock is gated, then kernel boot up will fail. Make sure earlycon's clock is enabled during kernel boot up. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23 20:06:00 -07:00
clk: imx: remove clk_count of imx_register_uart_clocks The clk count has been get with of_clk_get_parent_count, there is no need to pass clk_count from users. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230104110032.1220721-4-peng.fan@oss.nxp.com
2023-01-04 04:00:31 -07:00
imx_register_uart_clocks();
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 06:02:08 -07:00
}
CLK_OF_DECLARE(imx7ulp_clk_pcc3, "fsl,imx7ulp-pcc3", imx7ulp_clk_pcc3_init);
clk: imx: imx7ulp: add arm hsrun mode clocks support i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07 03:03:34 -07:00
static void __init imx7ulp_clk_smc1_init(struct device_node *np)
{
struct clk_hw_onecell_data *clk_data;
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
struct clk_hw **hws;
clk: imx: imx7ulp: add arm hsrun mode clocks support i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07 03:03:34 -07:00
void __iomem *base;
clk: imx: imx7ulp: use struct_size() in kzalloc() One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-23 23:40:25 -07:00
clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_SMC1_END),
GFP_KERNEL);
clk: imx: imx7ulp: add arm hsrun mode clocks support i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07 03:03:34 -07:00
if (!clk_data)
return;
clk_data->num = IMX7ULP_CLK_SMC1_END;
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
hws = clk_data->hws;
clk: imx: imx7ulp: add arm hsrun mode clocks support i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07 03:03:34 -07:00
/* SMC1 */
base = of_iomap(np, 0);
WARN_ON(!base);
clk: imx7ulp: make it easy to change ARM core clk ARM clk could only source from divcore or hsrun_divcore. Follow what we already used on i.MX7D and i.MX8M SoCs, use imx_clk_hw_cpu API. When ARM core is running normaly, whether divcore or hwrun_divcore will finally source from SPLL_PFD0. However SPLL_PFD0 is marked with CLK_SET_GATE, so we need to disable SPLL_PFD0, when configure the rate. So add CORE and HSRUN_CORE virtual clk to make it easy to configure the clk using imx_clk_hw_cpu API. Since CORE and HSRUN_CORE already marked with CLK_IS_CRITICAL, no need to set ARM as CLK_IS_CRITICAL. And when set the rate of ARM clk, prograting it the parent with CLK_SET_RATE_PARENT will finally set the SPLL_PFD0 clk. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16 01:32:33 -07:00
hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_SET_RATE_PARENT);
clk: imx: imx7ulp: add arm hsrun mode clocks support i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07 03:03:34 -07:00
clk: imx7up: Rename the clks to hws This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 02:25:50 -07:00
imx_check_clk_hws(hws, clk_data->num);
clk: imx: imx7ulp: add arm hsrun mode clocks support i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07 03:03:34 -07:00
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
}
CLK_OF_DECLARE(imx7ulp_clk_smc1, "fsl,imx7ulp-smc1", imx7ulp_clk_smc1_init);
Copy Permalink