License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 07:07:57 -07:00
|
|
|
# SPDX-License-Identifier: GPL-2.0
|
2014-10-16 05:40:38 -07:00
|
|
|
menu "Android"
|
|
|
|
|
|
|
|
|
|
config ANDROID_BINDER_IPC
|
|
|
|
|
bool "Android Binder IPC Driver"
|
2019-02-08 11:35:15 -07:00
|
|
|
depends on MMU
|
2014-10-16 05:40:38 -07:00
|
|
|
default n
|
2020-06-13 09:50:22 -07:00
|
|
|
help
|
2014-10-16 05:40:38 -07:00
|
|
|
Binder is used in Android for both communication between processes,
|
|
|
|
|
and remote method invocation.
|
|
|
|
|
|
|
|
|
|
This means one Android process can call a method/routine in another
|
|
|
|
|
Android process, using Binder to identify, invoke and pass arguments
|
|
|
|
|
between said processes.
|
|
|
|
|
|
binder: implement binderfs
As discussed at Linux Plumbers Conference 2018 in Vancouver [1] this is the
implementation of binderfs.
/* Abstract */
binderfs is a backwards-compatible filesystem for Android's binder ipc
mechanism. Each ipc namespace will mount a new binderfs instance. Mounting
binderfs multiple times at different locations in the same ipc namespace
will not cause a new super block to be allocated and hence it will be the
same filesystem instance.
Each new binderfs mount will have its own set of binder devices only
visible in the ipc namespace it has been mounted in. All devices in a new
binderfs mount will follow the scheme binder%d and numbering will always
start at 0.
/* Backwards compatibility */
Devices requested in the Kconfig via CONFIG_ANDROID_BINDER_DEVICES for the
initial ipc namespace will work as before. They will be registered via
misc_register() and appear in the devtmpfs mount. Specifically, the
standard devices binder, hwbinder, and vndbinder will all appear in their
standard locations in /dev. Mounting or unmounting the binderfs mount in
the initial ipc namespace will have no effect on these devices, i.e. they
will neither show up in the binderfs mount nor will they disappear when the
binderfs mount is gone.
/* binder-control */
Each new binderfs instance comes with a binder-control device. No other
devices will be present at first. The binder-control device can be used to
dynamically allocate binder devices. All requests operate on the binderfs
mount the binder-control device resides in.
Assuming a new instance of binderfs has been mounted at /dev/binderfs
via mount -t binderfs binderfs /dev/binderfs. Then a request to create a
new binder device can be made as illustrated in [2].
Binderfs devices can simply be removed via unlink().
/* Implementation details */
- dynamic major number allocation:
When binderfs is registered as a new filesystem it will dynamically
allocate a new major number. The allocated major number will be returned
in struct binderfs_device when a new binder device is allocated.
- global minor number tracking:
Minor are tracked in a global idr struct that is capped at
BINDERFS_MAX_MINOR. The minor number tracker is protected by a global
mutex. This is the only point of contention between binderfs mounts.
- struct binderfs_info:
Each binderfs super block has its own struct binderfs_info that tracks
specific details about a binderfs instance:
- ipc namespace
- dentry of the binder-control device
- root uid and root gid of the user namespace the binderfs instance
was mounted in
- mountable by user namespace root:
binderfs can be mounted by user namespace root in a non-initial user
namespace. The devices will be owned by user namespace root.
- binderfs binder devices without misc infrastructure:
New binder devices associated with a binderfs mount do not use the
full misc_register() infrastructure.
The misc_register() infrastructure can only create new devices in the
host's devtmpfs mount. binderfs does however only make devices appear
under its own mountpoint and thus allocates new character device nodes
from the inode of the root dentry of the super block. This will have
the side-effect that binderfs specific device nodes do not appear in
sysfs. This behavior is similar to devpts allocated pts devices and
has no effect on the functionality of the ipc mechanism itself.
[1]: https://goo.gl/JL2tfX
[2]: program to allocate a new binderfs binder device:
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>
#include <linux/android/binder_ctl.h>
int main(int argc, char *argv[])
{
int fd, ret, saved_errno;
size_t len;
struct binderfs_device device = { 0 };
if (argc < 2)
exit(EXIT_FAILURE);
len = strlen(argv[1]);
if (len > BINDERFS_MAX_NAME)
exit(EXIT_FAILURE);
memcpy(device.name, argv[1], len);
fd = open("/dev/binderfs/binder-control", O_RDONLY | O_CLOEXEC);
if (fd < 0) {
printf("%s - Failed to open binder-control device\n",
strerror(errno));
exit(EXIT_FAILURE);
}
ret = ioctl(fd, BINDER_CTL_ADD, &device);
saved_errno = errno;
close(fd);
errno = saved_errno;
if (ret < 0) {
printf("%s - Failed to allocate new binder device\n",
strerror(errno));
exit(EXIT_FAILURE);
}
printf("Allocated new binder device with major %d, minor %d, and "
"name %s\n", device.major, device.minor,
device.name);
exit(EXIT_SUCCESS);
}
Cc: Martijn Coenen <maco@android.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-14 05:11:14 -07:00
|
|
|
config ANDROID_BINDERFS
|
|
|
|
|
bool "Android Binderfs filesystem"
|
|
|
|
|
depends on ANDROID_BINDER_IPC
|
|
|
|
|
default n
|
2020-06-13 09:50:22 -07:00
|
|
|
help
|
binder: implement binderfs
As discussed at Linux Plumbers Conference 2018 in Vancouver [1] this is the
implementation of binderfs.
/* Abstract */
binderfs is a backwards-compatible filesystem for Android's binder ipc
mechanism. Each ipc namespace will mount a new binderfs instance. Mounting
binderfs multiple times at different locations in the same ipc namespace
will not cause a new super block to be allocated and hence it will be the
same filesystem instance.
Each new binderfs mount will have its own set of binder devices only
visible in the ipc namespace it has been mounted in. All devices in a new
binderfs mount will follow the scheme binder%d and numbering will always
start at 0.
/* Backwards compatibility */
Devices requested in the Kconfig via CONFIG_ANDROID_BINDER_DEVICES for the
initial ipc namespace will work as before. They will be registered via
misc_register() and appear in the devtmpfs mount. Specifically, the
standard devices binder, hwbinder, and vndbinder will all appear in their
standard locations in /dev. Mounting or unmounting the binderfs mount in
the initial ipc namespace will have no effect on these devices, i.e. they
will neither show up in the binderfs mount nor will they disappear when the
binderfs mount is gone.
/* binder-control */
Each new binderfs instance comes with a binder-control device. No other
devices will be present at first. The binder-control device can be used to
dynamically allocate binder devices. All requests operate on the binderfs
mount the binder-control device resides in.
Assuming a new instance of binderfs has been mounted at /dev/binderfs
via mount -t binderfs binderfs /dev/binderfs. Then a request to create a
new binder device can be made as illustrated in [2].
Binderfs devices can simply be removed via unlink().
/* Implementation details */
- dynamic major number allocation:
When binderfs is registered as a new filesystem it will dynamically
allocate a new major number. The allocated major number will be returned
in struct binderfs_device when a new binder device is allocated.
- global minor number tracking:
Minor are tracked in a global idr struct that is capped at
BINDERFS_MAX_MINOR. The minor number tracker is protected by a global
mutex. This is the only point of contention between binderfs mounts.
- struct binderfs_info:
Each binderfs super block has its own struct binderfs_info that tracks
specific details about a binderfs instance:
- ipc namespace
- dentry of the binder-control device
- root uid and root gid of the user namespace the binderfs instance
was mounted in
- mountable by user namespace root:
binderfs can be mounted by user namespace root in a non-initial user
namespace. The devices will be owned by user namespace root.
- binderfs binder devices without misc infrastructure:
New binder devices associated with a binderfs mount do not use the
full misc_register() infrastructure.
The misc_register() infrastructure can only create new devices in the
host's devtmpfs mount. binderfs does however only make devices appear
under its own mountpoint and thus allocates new character device nodes
from the inode of the root dentry of the super block. This will have
the side-effect that binderfs specific device nodes do not appear in
sysfs. This behavior is similar to devpts allocated pts devices and
has no effect on the functionality of the ipc mechanism itself.
[1]: https://goo.gl/JL2tfX
[2]: program to allocate a new binderfs binder device:
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>
#include <linux/android/binder_ctl.h>
int main(int argc, char *argv[])
{
int fd, ret, saved_errno;
size_t len;
struct binderfs_device device = { 0 };
if (argc < 2)
exit(EXIT_FAILURE);
len = strlen(argv[1]);
if (len > BINDERFS_MAX_NAME)
exit(EXIT_FAILURE);
memcpy(device.name, argv[1], len);
fd = open("/dev/binderfs/binder-control", O_RDONLY | O_CLOEXEC);
if (fd < 0) {
printf("%s - Failed to open binder-control device\n",
strerror(errno));
exit(EXIT_FAILURE);
}
ret = ioctl(fd, BINDER_CTL_ADD, &device);
saved_errno = errno;
close(fd);
errno = saved_errno;
if (ret < 0) {
printf("%s - Failed to allocate new binder device\n",
strerror(errno));
exit(EXIT_FAILURE);
}
printf("Allocated new binder device with major %d, minor %d, and "
"name %s\n", device.major, device.minor,
device.name);
exit(EXIT_SUCCESS);
}
Cc: Martijn Coenen <maco@android.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-14 05:11:14 -07:00
|
|
|
Binderfs is a pseudo-filesystem for the Android Binder IPC driver
|
|
|
|
|
which can be mounted per-ipc namespace allowing to run multiple
|
|
|
|
|
instances of Android.
|
|
|
|
|
Each binderfs mount initially only contains a binder-control device.
|
|
|
|
|
It can be used to dynamically allocate new binder IPC devices via
|
|
|
|
|
ioctls.
|
|
|
|
|
|
2017-02-03 15:40:48 -07:00
|
|
|
config ANDROID_BINDER_DEVICES
|
|
|
|
|
string "Android Binder devices"
|
|
|
|
|
depends on ANDROID_BINDER_IPC
|
2017-07-28 04:56:07 -07:00
|
|
|
default "binder,hwbinder,vndbinder"
|
2020-06-13 09:50:22 -07:00
|
|
|
help
|
2017-02-03 15:40:48 -07:00
|
|
|
Default value for the binder.devices parameter.
|
|
|
|
|
|
|
|
|
|
The binder.devices parameter is a comma-separated list of strings
|
|
|
|
|
that specifies the names of the binder device nodes that will be
|
|
|
|
|
created. Each binder device has its own context manager, and is
|
|
|
|
|
therefore logically separated from the other devices.
|
|
|
|
|
|
2017-08-23 08:46:40 -07:00
|
|
|
config ANDROID_BINDER_IPC_SELFTEST
|
|
|
|
|
bool "Android Binder IPC Driver Selftest"
|
|
|
|
|
depends on ANDROID_BINDER_IPC
|
2020-06-13 09:50:22 -07:00
|
|
|
help
|
2017-08-23 08:46:40 -07:00
|
|
|
This feature allows binder selftest to run.
|
|
|
|
|
|
|
|
|
|
Binder selftest checks the allocation and free of binder buffers
|
|
|
|
|
exhaustively with combinations of various buffer sizes and
|
|
|
|
|
alignments.
|
|
|
|
|
|
2014-10-16 05:40:38 -07:00
|
|
|
endmenu
|