1
linux/drivers/acpi/processor_core.c

430 lines
11 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2005 Intel Corporation
* Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
*
* Alex Chiang <achiang@hp.com>
* - Unified x86/ia64 implementations
*
* I/O APIC hotplug support
* Yinghai Lu <yinghai@kernel.org>
* Jiang Liu <jiang.liu@intel.com>
*/
#include <linux/export.h>
ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-02 17:49:16 -07:00
#include <linux/acpi.h>
#include <acpi/processor.h>
static struct acpi_table_madt *get_madt_table(void)
{
static struct acpi_table_madt *madt;
static int read_madt;
if (!read_madt) {
if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
(struct acpi_table_header **)&madt)))
madt = NULL;
read_madt++;
}
return madt;
}
static int map_lapic_id(struct acpi_subtable_header *entry,
u32 acpi_id, phys_cpuid_t *apic_id)
{
struct acpi_madt_local_apic *lapic =
container_of(entry, struct acpi_madt_local_apic, header);
if (!(lapic->lapic_flags & ACPI_MADT_ENABLED))
return -ENODEV;
if (lapic->processor_id != acpi_id)
return -EINVAL;
*apic_id = lapic->id;
return 0;
}
static int map_x2apic_id(struct acpi_subtable_header *entry,
int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id)
{
struct acpi_madt_local_x2apic *apic =
container_of(entry, struct acpi_madt_local_x2apic, header);
if (!(apic->lapic_flags & ACPI_MADT_ENABLED))
return -ENODEV;
if (device_declaration && (apic->uid == acpi_id)) {
*apic_id = apic->local_apic_id;
return 0;
}
return -EINVAL;
}
static int map_lsapic_id(struct acpi_subtable_header *entry,
int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id)
{
struct acpi_madt_local_sapic *lsapic =
container_of(entry, struct acpi_madt_local_sapic, header);
if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))
return -ENODEV;
if (device_declaration) {
if ((entry->length < 16) || (lsapic->uid != acpi_id))
return -EINVAL;
} else if (lsapic->processor_id != acpi_id)
return -EINVAL;
*apic_id = (lsapic->id << 8) | lsapic->eid;
return 0;
}
/*
* Retrieve the ARM CPU physical identifier (MPIDR)
*/
static int map_gicc_mpidr(struct acpi_subtable_header *entry,
int device_declaration, u32 acpi_id, phys_cpuid_t *mpidr)
{
struct acpi_madt_generic_interrupt *gicc =
container_of(entry, struct acpi_madt_generic_interrupt, header);
irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs To support virtual CPU hotplug, ACPI has added an 'online capable' bit to the MADT GICC entries. This indicates a disabled CPU entry may not be possible to online via PSCI until firmware has set enabled bit in _STA. This means that a "usable" GIC redistributor is one that is marked as either enabled, or online capable. The meaning of the acpi_gicc_is_usable() would become less clear than just checking the pair of flags at call sites. As such, drop that helper function. The test in gic_acpi_match_gicc() remains as testing just the enabled bit so the count of enabled distributors is correct. What about the redistributor in the GICC entry? ACPI doesn't want to say. Assume the worst: When a redistributor is described in the GICC entry, but the entry is marked as disabled at boot, assume the redistributor is inaccessible. The GICv3 driver doesn't support late online of redistributors, so this means the corresponding CPU can't be brought online either. Rather than modifying cpu masks that may already have been used, register a new cpuhp callback to fail this case. This must run earlier than the main gic_starting_cpu() so that this case can be rejected before the section of cpuhp that runs on the CPU that is coming up as that is not allowed to fail. This solution keeps the handling of this broken firmware corner case local to the GIC driver. As precise ordering of this callback doesn't need to be controlled as long as it is in that initial prepare phase, use CPUHP_BP_PREPARE_DYN. Systems that want CPU hotplug in a VM can ensure their redistributors are always-on, and describe them that way with a GICR entry in the MADT. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Miguel Luis <miguel.luis@oracle.com> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20240529133446.28446-15-Jonathan.Cameron@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-05-29 06:34:41 -07:00
if (!(gicc->flags &
(ACPI_MADT_ENABLED | ACPI_MADT_GICC_ONLINE_CAPABLE)))
return -ENODEV;
/* device_declaration means Device object in DSDT, in the
* GIC interrupt model, logical processors are required to
* have a Processor Device object in the DSDT, so we should
* check device_declaration here
*/
if (device_declaration && (gicc->uid == acpi_id)) {
*mpidr = gicc->arm_mpidr;
return 0;
}
return -EINVAL;
}
/*
* Retrieve the RISC-V hartid for the processor
*/
static int map_rintc_hartid(struct acpi_subtable_header *entry,
int device_declaration, u32 acpi_id,
phys_cpuid_t *hartid)
{
struct acpi_madt_rintc *rintc =
container_of(entry, struct acpi_madt_rintc, header);
if (!(rintc->flags & ACPI_MADT_ENABLED))
return -ENODEV;
/* device_declaration means Device object in DSDT, in the
* RISC-V, logical processors are required to
* have a Processor Device object in the DSDT, so we should
* check device_declaration here
*/
if (device_declaration && rintc->uid == acpi_id) {
*hartid = rintc->hart_id;
return 0;
}
return -EINVAL;
}
/*
* Retrieve LoongArch CPU physical id
*/
static int map_core_pic_id(struct acpi_subtable_header *entry,
int device_declaration, u32 acpi_id, phys_cpuid_t *phys_id)
{
struct acpi_madt_core_pic *core_pic =
container_of(entry, struct acpi_madt_core_pic, header);
if (!(core_pic->flags & ACPI_MADT_ENABLED))
return -ENODEV;
/* device_declaration means Device object in DSDT, in LoongArch
* system, logical processor acpi_id is required in _UID property
* of DSDT table, so we should check device_declaration here
*/
if (device_declaration && (core_pic->processor_id == acpi_id)) {
*phys_id = core_pic->core_id;
return 0;
}
return -EINVAL;
}
static phys_cpuid_t map_madt_entry(struct acpi_table_madt *madt,
int type, u32 acpi_id)
{
unsigned long madt_end, entry;
phys_cpuid_t phys_id = PHYS_CPUID_INVALID; /* CPU hardware ID */
if (!madt)
return phys_id;
entry = (unsigned long)madt;
madt_end = entry + madt->header.length;
/* Parse all entries looking for a match. */
entry += sizeof(struct acpi_table_madt);
while (entry + sizeof(struct acpi_subtable_header) < madt_end) {
struct acpi_subtable_header *header =
(struct acpi_subtable_header *)entry;
if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
if (!map_lapic_id(header, acpi_id, &phys_id))
break;
} else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) {
if (!map_x2apic_id(header, type, acpi_id, &phys_id))
break;
} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
if (!map_lsapic_id(header, type, acpi_id, &phys_id))
break;
} else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) {
if (!map_gicc_mpidr(header, type, acpi_id, &phys_id))
break;
} else if (header->type == ACPI_MADT_TYPE_RINTC) {
if (!map_rintc_hartid(header, type, acpi_id, &phys_id))
break;
} else if (header->type == ACPI_MADT_TYPE_CORE_PIC) {
if (!map_core_pic_id(header, type, acpi_id, &phys_id))
break;
}
entry += header->length;
}
return phys_id;
}
phys_cpuid_t __init acpi_map_madt_entry(u32 acpi_id)
{
struct acpi_table_madt *madt = NULL;
phys_cpuid_t rv;
acpi_get_table(ACPI_SIG_MADT, 0,
(struct acpi_table_header **)&madt);
if (!madt)
return PHYS_CPUID_INVALID;
rv = map_madt_entry(madt, 1, acpi_id);
acpi_put_table((struct acpi_table_header *)madt);
return rv;
}
irqchip/gic-v3: Enable non-coherent redistributors/ITSes ACPI probing The GIC architecture specification defines a set of registers for redistributors and ITSes that control the sharebility and cacheability attributes of redistributors/ITSes initiator ports on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER, GITS_BASER<n>). Architecturally the GIC provides a means to drive shareability and cacheability attributes signals but it is not mandatory for designs to wire up the corresponding interconnect signals that control the cacheability/shareability of transactions. Redistributors and ITSes interconnect ports can be connected to non-coherent interconnects that are not able to manage the shareability/cacheability attributes; this implicitly makes the redistributors and ITSes non-coherent observers. To enable non-coherent GIC designs on ACPI based systems, parse the MADT GICC/GICR/ITS subtables non-coherent flags to determine whether the respective components are non-coherent observers and force the shareability attributes to be programmed into the redistributors and ITSes registers. An ACPI global function (acpi_get_madt_revision()) is added to retrieve the MADT revision, in that it is essential to check the MADT revision before checking for flags that were added with MADT revision 7 so that if the kernel is booted with an ACPI MADT table with revision < 7 it skips parsing the newly added flags (that should be zeroed reserved values for MADT versions < 7 but they could turn out to be buggy and should be ignored). Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/20240606094238.757649-2-lpieralisi@kernel.org
2024-06-06 02:42:38 -07:00
int __init acpi_get_madt_revision(void)
{
struct acpi_table_header *madt = NULL;
int revision;
if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0, &madt)))
return -EINVAL;
revision = madt->revision;
acpi_put_table(madt);
return revision;
}
static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
struct acpi_subtable_header *header;
phys_cpuid_t phys_id = PHYS_CPUID_INVALID;
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
goto exit;
if (!buffer.length || !buffer.pointer)
goto exit;
obj = buffer.pointer;
if (obj->type != ACPI_TYPE_BUFFER ||
obj->buffer.length < sizeof(struct acpi_subtable_header)) {
goto exit;
}
header = (struct acpi_subtable_header *)obj->buffer.pointer;
if (header->type == ACPI_MADT_TYPE_LOCAL_APIC)
map_lapic_id(header, acpi_id, &phys_id);
else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC)
map_lsapic_id(header, type, acpi_id, &phys_id);
else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC)
map_x2apic_id(header, type, acpi_id, &phys_id);
else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT)
map_gicc_mpidr(header, type, acpi_id, &phys_id);
else if (header->type == ACPI_MADT_TYPE_CORE_PIC)
map_core_pic_id(header, type, acpi_id, &phys_id);
exit:
kfree(buffer.pointer);
return phys_id;
}
phys_cpuid_t acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id)
{
phys_cpuid_t phys_id;
phys_id = map_mat_entry(handle, type, acpi_id);
if (invalid_phys_cpuid(phys_id))
phys_id = map_madt_entry(get_madt_table(), type, acpi_id);
return phys_id;
}
EXPORT_SYMBOL_GPL(acpi_get_phys_id);
int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id)
{
#ifdef CONFIG_SMP
int i;
#endif
if (invalid_phys_cpuid(phys_id)) {
/*
* On UP processor, there is no _MAT or MADT table.
* So above phys_id is always set to PHYS_CPUID_INVALID.
*
* BIOS may define multiple CPU handles even for UP processor.
* For example,
*
* Scope (_PR)
* {
* Processor (CPU0, 0x00, 0x00000410, 0x06) {}
* Processor (CPU1, 0x01, 0x00000410, 0x06) {}
* Processor (CPU2, 0x02, 0x00000410, 0x06) {}
* Processor (CPU3, 0x03, 0x00000410, 0x06) {}
* }
*
* Ignores phys_id and always returns 0 for the processor
* handle with acpi id 0 if nr_cpu_ids is 1.
* This should be the case if SMP tables are not found.
* Return -EINVAL for other CPU's handle.
*/
if (nr_cpu_ids <= 1 && acpi_id == 0)
return acpi_id;
else
return -EINVAL;
}
#ifdef CONFIG_SMP
for_each_possible_cpu(i) {
if (cpu_physical_id(i) == phys_id)
return i;
}
#else
/* In UP kernel, only processor 0 is valid */
if (phys_id == 0)
return phys_id;
#endif
return -ENODEV;
}
int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
{
phys_cpuid_t phys_id;
phys_id = acpi_get_phys_id(handle, type, acpi_id);
return acpi_map_cpuid(phys_id, acpi_id);
}
EXPORT_SYMBOL_GPL(acpi_get_cpuid);
#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
static int get_ioapic_id(struct acpi_subtable_header *entry, u32 gsi_base,
u64 *phys_addr, int *ioapic_id)
{
struct acpi_madt_io_apic *ioapic = (struct acpi_madt_io_apic *)entry;
if (ioapic->global_irq_base != gsi_base)
return 0;
*phys_addr = ioapic->address;
*ioapic_id = ioapic->id;
return 1;
}
static int parse_madt_ioapic_entry(u32 gsi_base, u64 *phys_addr)
{
struct acpi_subtable_header *hdr;
unsigned long madt_end, entry;
struct acpi_table_madt *madt;
int apic_id = -1;
madt = get_madt_table();
if (!madt)
return apic_id;
entry = (unsigned long)madt;
madt_end = entry + madt->header.length;
/* Parse all entries looking for a match. */
entry += sizeof(struct acpi_table_madt);
while (entry + sizeof(struct acpi_subtable_header) < madt_end) {
hdr = (struct acpi_subtable_header *)entry;
if (hdr->type == ACPI_MADT_TYPE_IO_APIC &&
get_ioapic_id(hdr, gsi_base, phys_addr, &apic_id))
break;
else
entry += hdr->length;
}
return apic_id;
}
static int parse_mat_ioapic_entry(acpi_handle handle, u32 gsi_base,
u64 *phys_addr)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_subtable_header *header;
union acpi_object *obj;
int apic_id = -1;
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
goto exit;
if (!buffer.length || !buffer.pointer)
goto exit;
obj = buffer.pointer;
if (obj->type != ACPI_TYPE_BUFFER ||
obj->buffer.length < sizeof(struct acpi_subtable_header))
goto exit;
header = (struct acpi_subtable_header *)obj->buffer.pointer;
if (header->type == ACPI_MADT_TYPE_IO_APIC)
get_ioapic_id(header, gsi_base, phys_addr, &apic_id);
exit:
kfree(buffer.pointer);
return apic_id;
}
/**
* acpi_get_ioapic_id - Get IOAPIC ID and physical address matching @gsi_base
* @handle: ACPI object for IOAPIC device
* @gsi_base: GSI base to match with
* @phys_addr: Pointer to store physical address of matching IOAPIC record
*
* Walk resources returned by ACPI_MAT method, then ACPI MADT table, to search
* for an ACPI IOAPIC record matching @gsi_base.
* Return IOAPIC id and store physical address in @phys_addr if found a match,
* otherwise return <0.
*/
int acpi_get_ioapic_id(acpi_handle handle, u32 gsi_base, u64 *phys_addr)
{
int apic_id;
apic_id = parse_mat_ioapic_entry(handle, gsi_base, phys_addr);
if (apic_id == -1)
apic_id = parse_madt_ioapic_entry(gsi_base, phys_addr);
return apic_id;
}
#endif /* CONFIG_ACPI_HOTPLUG_IOAPIC */